Installed the PDF converter to word for IMAC Yosemite, but get the error message "an error has occurred while trying to access the services.  What to do next?  Do I need installed on IMAC microsoft word?

Similar Questions

• I'm running into this error message to a sysprep to capture a WIM image modified: "a fatal error has occurred while trying to sysprep the machine."

  Original title: WDS & Sysprep

  Hello

  I'm running into this error message to a sysprep to capture a WIM updated image the:
  3.14 system preparation tool
  "A fatal error has occurred while trying to sysprep the machine."
  She is probably explained by the time of Amendment 3, but is there a way to bypass that force me to change the registry whenever I use the new image?
  Any recommendations on how to solve this problem would be appreciated.
  Thank you.

  GN

  Please post your request here:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproinstall&filter=AllTypes&sort=lastpostdesc

• a disk error has occurred while trying to write the following file

  I was working on my video and I put in a video file and a 10 seconds later, I get an error saying "a disk error occurred while trying to write the following file.

  and audio of the video was not working I close Premiere Pro and open again to do the same thing and it happens again if you know how to fix this please tell me I need to change my video so I can get it to the top on youtube tomorrow.

  I contacted support and it turns off everything, I had to do was move the first clip on the desktop... lol Thanks much for the great help! Sorry for the trouble

• General error has occurred while trying to run the initial Setup Wizard

  Anyone have advice on the implementation of vCOPS?  I have deployed the ovf, use a Pool of IP and configure static ip addresses, I get to the login page (https://< IP > / admin) and when running the Setup Wizard initial on the front page of details of vCenter Server I get a message "General error has occurred", which does not allow me to go further.  Now, I closed the browser to try again and I get a "Virtual Appliance Repair" screen that also fails with a general error has occurred.  Can anyone help solve this?

  The vCOPS unit is version 5.0.1.0 build 677931

  vCenter is version 4.1.0 build 258902

  

  Thank you

  
  Dan

  Looks like you had a communication problem between two virtual machines.

  When you created the IP pool leave you this option disabled?  Also, you associate it with the same network that the virtual machines are connected?

• I get an error message "an error has occurred while trying to write to the CONFIG folder. MSI"by updating to adobe reader.

  I have a folder named CONFIG. MSI shows as locked in 'share with '.  I can't seem to change the configuration, that is, to unlock the file.  In addition, 'Properties' shows 22 files in the folder but only 2 files display in Windows Explorer.  When I try to update Adobe Reader, I get an error message that an error occurred during the attempt to write to the CONFIG folder. MSI.  I am the administrator on this PC.  What can I do?

  Original title: locked file, CONFIG. MSI

  Hi Paul Rumbaugh,.

   

  (1) this exactly happens when you try to access the folder?
  (2) what is the error message or error code ?
  (3) have you made changes on the computer?

  Method 1-

  You should check if the problem persists in Safe Mode as well.
  To connect in Safe Mode, you must follow the steps in the article-

  Start the computer in Mode safe

  Note: make sure you connect in Normal Mode after you perform the troubleshooting steps.

  Method 2-

  Perform the steps in the article-

  Disable the anti-virus software

  Enable or disable Windows Firewall

  Note: make sure that you turn on Windows Firewall and re- Activate the antivirus after performing all the troubleshooting steps given the computer can be at risk of infection by the virus.

  Method 3-

  See the steps in the link-

  Error writing to file C:Config.MSI

  Note: you must follow step 7 of article to return the computer to Normal startup after you perform the troubleshooting steps.

  Hope this helps!

• On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Can you advise steps I might take now?  On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Hi Ringdoc,

  Please see this: "Error has occurred when trying to access this service" when you sign in to Acrobat.com

  Let us know how it goes!

  Best,

  Sara

• Error message ' year error occurred while trying to access the service ' when I try to convert a file?

  When I try to convert a file to PDF or PDF I get the error message ' year error occurred while trying to access the service "what can I do to fix?  I already applied the updates and attempted to correct?

  You could always connect to Acrobat.com directly and use the service via the web site, if it's a critical need.

• "Year error occurred while trying to access the service.

  Attempts to convert the PDF to Word file. Have done successfully until last week until we started getting an error "year error occurred while trying to access the service.

  Please can you kindly advise on the possible cause?

  Hi quantum recruitment,.

  You try to access the service via a web browser or via Adobe Reader? If you use a browser, please clear the cache and try again or try another browser (see system requirements |) Acrobat.com

  (or a list of supported browsers).

  If you use Reader, choose Help > updates to ensure that you are using the latest version of the player. You must have the 11.0.09 reader.

  Kind regards

  Florence

• I get an error code 646 while trying to download the updates

  I get an error code 646 while trying to download the updates, update security for Microsoft Works 9 (KB2431831)

  Download size: 2.1 MB

  Help, please

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

• Move to the new computer, get "an error has occurred during playback of files or write files to a disk." The disc

  • I tried to move my catalog and PE6 install to a new computer.  This is on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64-bit) machine.  I always kept my photo on an external hard drive files.  My library is 50 GB, 10,000 files.  Here's what I did.
    • Copied the original PE6 installation file on the Toshiba.  Installed but not activate it.
    • Copied my catalog folder to the location of the Windows 7.
    • Plug the external drive into the Toshiba.  So makes that same letter drive as a front.
    • Fired up to PE6 on Toshiba.  Seemed fine in the Organizer.  Everything seemed to be there, but I didn't try to make any changes at this time there.
    • PE6 disabled on the Dell.  Enabled on the Toshiba.
  • Then I realized that it is not fair.  I can edit the keywords and the stars rating on photos, but not the dates, legends or notes.  I get "an error has occurred during playback of files or write files to a disk." The drive is may be full, or there may be problems with the source media. »
  • Only a fraction of the external drive is in use.
  • I can access the files on the external hard drive with another application (Windows Photo Viewer).
  • I tried the reconnect All missing files.  Somewhat ambiguous, she said "There are no files to reconnect."
  • In the properties in the organizer for each photo are the appropriate file names and paths.  Folder view works fine in the Organizer.
  • I can put new files in the directories of the same external drive, import them into PE6, then change them normally.

  What is the best way to get Organizer connected correctly to my files?  I guess I could import all photos on the new machine, but I guess I'd lose some of my metadata.  So it's out of the question.

  Thank you

  Bill

  Well, the recommended method for moving the catalog is to use organizer of the PSE6 on your old computer to do a full backup on your DHM.  (Which backs up the catalog and media files).  Then, on your new computer, open the Organizer PSE6 and restore from this backup.

  Your method seems logical, but...

  Ken

• an error occurred while trying to access the server

  an error occurred while trying to access the server, I get this message when you try to convert, what's the problem, the user of windows 7

  Hi Laura,

  It looks like you can try to access one of the services of Adobe Document Cloud in Adobe Reader. If so, please close the session, and then reconnect.

  If you're still having problems, please try to connect via the web interface at https://cloud.acrobat.com.

  Let us know how it goes!

  Best,

  Sara

• DW/WordPress "an unknown error has occurred while discovering the linked files dynamically"

  I'm trying to configure Dreamweaver CC 2014 to work with my WordPress site 4.0 on the remote server where it is installed. Access to the server is fine, tested ok, all the files listed and sync without problem. But every time I try to dynamically discover files that I get "an unknown error has occurred" while discovering the dynamically related files. What is going on? (Permalinks are the default btw)

  Is easily fixed! I just discovered that under my server settings, I had both 'remote' and 'Testing' checked. I checked "Remote" and it works fine. Just check 'test '.

• ExportPDF - "year error occurred while trying to access the service.

  I've never had a problem using ExportPDF in the past, but recently, I get an error message saying "year error occurred while trying to access the service.  I am using the same browser, Chrome, I've always used.  Please tell me how to solve this problem.

  Hi metal_anthropo,

  Please log and clear the browser cache and then reload https://cloud.acrobat.com. If this does not work, please try to connect by using a different web browser (just as a trial).

  Something has changed on your system as you were last able to connect to Acrobat.com? You use Mac OS or Windows?

  Best,

  Sara

• HA error "an error has occurred while setting up the HA Agent on the host" &amp; "Failed to find host name" on the ESX host

  I had to reload of the two ESX 3.0.2 Server I have here.

  Now the I get a HA error "an error has occurred while setting up the HA Agent on the host" when try to reconfigure HA.

  I note also that the same host if console type 'hostname - a' I get "Failed to find host name"

  I still seem to migrate virtual machines, but clearly something is wrong somewhere, there DNS config file I can check, I already check ed the hosts file and I can ping everything using long DNS name and short host name.

  Or maybe there is dns service can I restart?

  Thank you

  If you are running ESX 3.0.x check/etc/FT_HOSTS

  You can also check http://kb.vmware.com/kb/1003691

• In Windows 7 LPD printing service is off and when I turn on the feature, get an error has occurred, and LPD print Service remains.

  Had the Toshiba laptop for 6 months and the printer works fine.

  Then the printers not available error.  Go to control panel, programs and features, select nfeature.  LPD printing service and were all two Port LPR OFF monitor.  Able to turn ONE monitor Port LPR, but when turn characteristic on printing to LPD, a message service, an error has occurred.

  Fixit printer running tool does not help.

  Hi Surfa,

  Thanks for posting in the Microsoft Community Forums.  Be assured that we will do our best to answer the question.

  According to the description, you can not enable LPD printing service in Windows 7.

  Please follow the steps to solve the problem with LPD printing service:

  Method 1: SFC Run scan into the computer

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files

  http://support.Microsoft.com/kb/929833

  Method 2: Enable the LPD service:

  1. Select Start, Panel of.
  2. Select "Programs" in the Control Panel window.
  3. Select "Activate Windows features turn on or off" in the Group of programs and features.
  4. The user account control system will be asked permission to continue. Click on the "Continue" button.
  5. Displays the Windows features window .
  6. Expand the item "Print Services" .
  7. Place a check next to 'LPD print Service' and click the 'OK' button. Windows Vista will install and enable the LPD services for you

  Method 3: Temporarily disable the security software and firewall settings and check if the Internet connection drops.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See the article:

  Network printer problems

  http://Windows.Microsoft.com/en-CA/Windows-Vista/troubleshoot-network-printer-problems

  Note: Article applies to Windows 7.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.