Installed Windows after Ubuntu, now cannot start in Ubuntu

Similar Questions

• Just installed Windows 7 and now cannot install Realtek audio driver

  Hello everyone, I recently installed windows 7 to my U330 and now impossible to install the audio driver realtek. He maintains did not give me an error code '0 x 00000103 '. can someone tell me what could be the problem? Thank you.

  to solve this...

  just go to the REALTEK Web site and download their audio drivers WIndows 7 HD it and install. Problem solved!

• Installed Windows 10. Now cannot open a Word attachment. Microsoft is not going to help with what they say, it's a Firefox issue. Help, please?

  See the question above.
  I have recently upgraded to Windows 10. I can open is no longer Word attachments, sent to me by the customer in their emails. I called Microsoft support and they said they don't support Outlook as and email client. I had hoped the problem was widespread and would have been fixed now, but I do not see again for any help.

  Thanks for any advice that anyone can have.

  Dominic deFazio

  I followed your suggestion, but when he asks what to use to open the doc it gives two choices, 'Word' and 'other '.
  Where is the 'other' and 'Browse' you suggest?

  See pictures attached - they are for the pdf, but 'The other' and 'Browse' the options are the same.

  Location should be here:
  C:\Program Files\Microsoft Office\root\Office15\Winword.exe
  Note: If you use a 64-bit version of Windows with the 32-bit version of Office, the default location includes (x 86) in the path.
  for example: C:\Program Files (x 86) \Microsoft Office\root\Office15\Winword.exe

  However, if you open an another doc word received by email, it is likely that Matt is correct and the word attachment document has been corrupted somehow by scan before opening.

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• I installed windows 7 and now my bluerayburner does even appear quite Similarly in Mgr. device!

  Hi, I installed windows 7 and now my Blu - ray drive does not even appear not at all, even in the device mgr. When I put it in a disk begins to spin and it stops, but it does not even acknowledge at all that there a burner. I know that there are many problems with windows 7 Blu-ray disc does not play, but I can't even get there. Is there a fix to windows again? I appreciate all help. Thank you, God bless you

  Radlfly
   
  [Moved from comments]

  Hi Radlfly,

  I see that you have some problems with the burner blu - ray on Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the blu - ray player?

  3. have you made changes on the computer recently?

  4 is the issue confined to this hard drive?

  I want you to know that Blu - Ray is a patented technology, so need the codec appropriate to buy and this is why we cannot include it in our operating system.

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  Click on the link: MPEG and DVD video: frequently asked questions: http://windows.microsoft.com/en-US/windows7/MPEG-and-DVD-video-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Windows 8 and now cannot get my printer to print. Tried to print a test page, message says "sent to the printer test page", but it does not print.

  I recently downloaded Windows 8 and now cannot get my printer to print.  Tried to print a test page, message says "sent to the printer test page", but it does not print.  Can you help me?

  You have installed the drivers and software for your printer?  Did you go to the printer manufacturer's website to see if they still have 8 available Windows compatible drivers?  If the answer is no, then you must do this before all first I try to print.

• On Win 7: I just installed windows 7 and now I can't play properly. They run slowly.

  I just installed windows 7 and now I can't play properly.  They run slowly.  I tried to download the drivers updated my video card without success.  Do you have any suggestions?

  Windows 7 comes with installed DirectX11. In order to run your games, you need to install the package DirectX9 and updates here:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  This should make your games run better.

• Rebuild (OS disk) drives can re - install Windows after installation of Linux?

  Hi folks,.

  Question: Can the disks to rebuild (OS + pilots) Re-install Windows, after a Linux installation?

  Goal: The goal is to alternate between facilities of OS: Linux - and Windows - and Linux - etc.

  Thanks again, good people.

  Of

  a valued customer

  You have more question?

  If you do not, please click to accept as a Solution to close this case.

  Tank You

  Cristian

• I installed windows 7 and now my canoscan lide 50 scanner does not work.

  I installed windows 7 and now my canoscan lide 50 scanner does not work. Anyone know if it will be a windows 7 update driver to resolve this problem? If this is not the case, what scanner in the price of $80 will work on windows 7?

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/1afc4c13-551e-4372-8ecb-c16dfbfd442f/

  Here is the solution for the LiDE 50...

• I installed windows 8 and now I have no dvd/cd player

  I have a HP Pavilion series g approx. 3 months and everything worked until I installed Windows 8. Now, I have no dvd/cd player. I tried the Manager of devices etc and still no dvd/cd player. I looked on this site but nothing worked (hard to follow, I'm just a simple person and need instructions very very basic) I noticed that there are many people with the same type of problem. How do contact you Microsoft to resolve this issue?

  G ' Day

  Yes still available at http://windows.microsoft.com/en-au/windows/downloads

  There are three available in the middle of the page you're viewing down they are

  Windows Media Player
  Windows Photo Gallery
  Windows Movie Maker

  Hope this helps

  I downloaded the media Player and it works fine.

• I bought around ten year 7 Photoshop and Indesign etc and now I'm using only Photoshop 7. Three months ago I installed Windows 10 and now the ad once I can't use my Photoshop 7 more. Should wat I do?

  I bought around ten year 7 Photoshop and Indesign etc and now I'm using only Photoshop 7. Three months ago I installed Windows 10 and now the ad once I can't use my Photoshop 7 more. Should wat I do?

  The oldest is compared to newer operating systems, it is less likely to work.  If you have been happy with the help of Photoshop 7 then you should be happy with the old operating system as well.  Your options are either to return to a system that supports your software or to buy new software to go with the new system.  CS6 products are still selling as far as I know.  In addition, your only option is to subscribe to the cloud of Creative for Photoshop CC.

• Satellite A200-137 - cannot install windows after the hard disk crash

  last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
  I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

  After trying to install 3 times with recovert I tried to install windows xp.
  After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
  But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

  So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

  > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
  On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
  This title was the original HARD drive?
  If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

  Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
  Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

• Update interrupted - now cannot start Windows

  Hello

  Completely new to this forum and in the world of the system recovery / technical questions will therefore be very grateful for any help that you can offer but please keep clear answers.

  I am running windows 7 on a Samsung laptop about 3 years. During the last weeks I had problems with the battery. When not plugged in the laptop sometimes turned off and the error messages pops up saying occasionally replace the battery. I now only use it plugged into the mains. However, yesterday, when I tried to stop, windows installed updates and the wall socket, broke off. To my horror, the computer turns off so that the update (1 of 31).

  Now, I can't start windows. See below what I tried so far without success.

  Tried to load Windows normally. Key start-up windows screen and then error blue screen and restarts.

  Tried to select recovery at startup option. Through repair screens. Asked if I would restore the system to an earlier era. Tried by selecting Yes and no at this point. So yes, message says not able to repair and asks if I want to send an error message. In the absence, said also unable to repair.

  Tried to start in safe mode. As above - will from the screen windows and error, then blue and restarts.

  Tried to insert the Samsung recovery cd. When the computer starts. Press the key to load from cd. This goes to a windows install page (select language, etc.). Seems to be saying that if I do that I'll lose files?  So not go one more away.

  Have you tried pressing f8 and repair different, but process as well as above - unable to repair.

  I myself am kicking to not fix the battery problem, but I never thought it would happen. In any case, I have a recent backup of most of the files, so not a total disaster, but I would like to save some recent if possible files. The only other option I see is to remove the hard drive and buy a USB connector stada (?) and try to transfer as an external drive. How difficult is cela and what connector do I need? Understand you can not recommend a product, but is there something specific I should look for, and what are the differences between the cheapest and most expensive? Are there more reliable / brands of higher quality that I should look for? Also, if I do this, can I then replace the hard drive and reinstall windows, and it's going to work?

  I have no knowledge of the BIOS so not sure I can try relating to the recovery of base?

  Will be very grateful if someone could help it. I can post more detailed error codes / logs later when I'm in front of a computer if you need.

  Hello

  Thank you for visiting Microsoft Community and your efforts to resolve the issue is highly appreciated.

  According to the description of the problem, you cannot start your Windows 7 computer. This could be if there is a corruption of system files or boot files are missing or damaged.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Resized partition Boot Camp, now cannot start Windows

  I have a MacBook Pro (with the retina) with a 128 GB SSD which was, until recently, evenly divided 50-50 between Mac and Windows 8.

  However, I need more space on the size of Windows, so I reduced the size of the Mac partition to 40 GB and then, because for some reason I couldn't expand the Boot Camp one, I had to create another partition that I could use to put my stuff in side Windows.

  I did this via Windows.

  I now, weeks later, started in Mac for the first time since, and now I can't get back into Windows. The partition is not present on the desktop, or in the boot disk utility.

  Output of gdisk:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: protection

  BSD: absent

  APM: absent

  TPG: present

  Found valid GPT with protective MBR; using GPT.

  Disk/dev/disk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 453C975D-0233-49EB-A8C3-7B7BF7805CFD

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 4165 sectors (2.0 MiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 79247487 37.6 giB AF05 customer

  3 79247488 80517023 619.9 MiB AB00 Recovery HD

  4 80517120 119578623 18.6 giB 0700 basic data partition

  5 119580672 236976127 56.0 giB AF00 BOOTCAMP

  Can anyone help please? The partition is obviously still there, but I can't work on how to make it reappear in the startup disk!

  Can you use [help] can not boot Windows after resizing partition (8.1) as reference and rebuild your MBR?

• Cannot install windows after reset of the partition

  I've literally been sitting to my macbook for the last 10 hours trying to get my bootcamp at work, however after tons of things difficult and research I found online I'm always at a loss. Initially, I had installed windows 7 a few weeks ago for the second time (after that yosemite deleted my previous one during the upgrade) and everything was fine. Then, I took the decision to uninstall my windows because I really wanted to expand the size of my partition, then backed up all my files and used bootcamp to delete windows and re partitioning my hard drive to a single volume. However after this, and then following the same exact steps as before (running bootcamp and sharing in a larger space) once the restarts my laptop that it comes up with the message "No boot device - insert boot disk and press any key" instead start windows automatically load (as it did before). I've repeated several times in the hope that it would work once however I can't help but feel that there is a problem with my hard drive and when I try to check my hard drive (not the 'Macintosh HD' a top one) sometimes - (I say sometimes because it does not say this error when you try to check) said this :

  Audit score card for "APPLE HDD HTS547 * A9E384 Media.

  Checking prerequisites

  Checking the list of partition

  Looking for an EFI system partition

  Checking the size of the EFI system partition

  The EFI system partition file system check

  Check the contents of the folder on the EFI system partition

  Problems were found with the partition plan that may prevent startup

  Error: A disk with a mount point is required.

  and yet when I performed the same task again 2 minutes later he says:

  Audit score card for "APPLE HDD HTS547 * A9E384 Media.

  Checking prerequisites

  Checking the list of partition

  Looking for an EFI system partition

  Checking the size of the EFI system partition

  The EFI system partition file system check

  Check the contents of the folder on the EFI system partition

  Audit of all areas of charger data HFS partition

  Audit of the partitions to boot

  Checking boot partition disk0s4

  Check the file system.

  HFS volume logged more control.

  Check the overflow file extensions.

  Check the file catalog.

  Checking multiple files linked.

  Check the catalog hierarchy.

  Check the extended attribute file.

  Checking volume bitmap.

  Check the volume information.

  The volume Recovery HD seems to be OK.

  File system check exit code is 0.

  Verification of the physical Volume of basic storage partitions

  The partition plan seems to be OK

  (and just for the record more when I check macintosh hd, fine):

  Check the volume "Macintosh HD"

  Check the file system.

  Using the live mode.

  Perform direct verification.

  HFS volume logged more control.

  Check the overflow file extensions.

  Check the file catalog.

  Checking multiple files linked.

  Check the catalog hierarchy.

  Check the extended attribute file.

  Checking volume bitmap.

  Check the volume information.

  The volume Macintosh HD appears to be OK.

  File system check exit code is 0.

  I'm really not good when it comes to such things, so this information can be totally irrelevant, sorry! I had originally check my volumes a recovery when yosemite initially deleted to repartition my hard drive and reinstall windows. I really don't know what to do, any help would be appreciated. I have no knowledge in this subject what so ever but I feel that my hard drive is damaged somewhere (even if yosemite still works perfectly and all my files appear to be intact) or for some reason my boot loaders do not work...

  I can provide more information if necessary, but quite frankly, I have no idea what I'm doing.

  Thank you for taking the time to read this if you have!

  1. do you use a USB key to install Windows?

  2 can you post the output of the following OSX Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.