Installer of DMA2200 - Center support looking for driver (new installation)

I just came home with my new DMA2200 and I get through most of the media center install but when it installs and checking the items off it hits "Configuration of the extension settings" and a dialog box saying Windows new hardware found opens and asks me to locate the driver.  There is no driver on the CD and nothing in windows.

If I skip this section of hardware installation does not finish the installation

Help!

OK, I got than that, for some reason any even thought the "Search subfolders" box has been checked, the found new hardware wizard was not performing the System32 folder.  I did there and bingo, all work.  I wonder if it was something to do with indexed locations?

However, it would have been much easier if Linksys put the drivers on their website

Tags: Linksys Adapters

Similar Questions

  • Looking for driver CanoScan D646U

    Looking for driver CanoScan D646U

    CanoScan D646U drivers:
    http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_d646u?selectedName=DriversAndSoftware

    Note: they do not have Vista or Windows 7 drivers, the latest drivers Canon has are for XP.

  • Device problem: "Master UDS Bus of Kernal USB driver software Bus by TCP is not installed. Looking for driver fails.

    New install of Win 7.  Control Panel >... > devices and printers: problem with the computer. Convenience store ran with results: "pilot of Master NODES Bus of Kernal USB software Bus by TCP is not installed. Looking for driver fails.

    Note: the only known problem I have is that I can't print to a printer USB connected in local (HP 5280).  Curious, the printer PC utility I can print a test page.  Microsoft Office 2007 apps, not printing.

    I get the same error message.

    It seems to be related to my D - Link DIR-655 Router and software (offered through D-Link) called "SharePort," which allows the USB port at the back of the router to use for networking!

    I have 5 PCs on my home network and printer. With installed Shareport, I connected my printer to the router via the USB port. I don't have to have the computer on it, I used initially to install the printer.

    To access the printer on any PC, I just have the icon in my taskbar.

    The error message is displayed because, by default, SharePort is closed and it reads it as "not installed"!

    I used it with Vista and Windows 7 Ultimate x 32 and x 64 with no problems!

    Just as with the 'coprocessor' "impossible to install driver" error message, I uninstalled them in (several times) Device Manager and the error messages no longer appear!

    So, in my case, the messages themselves were the only mistake!

    FYO: Coprocessor refers to hardware devices such as fingerprint security to access your PC, instead of a password!

    I hope this has been helpful!

  • Satellite A100-204: I'm looking for a new battery

    I'm looking for a new battery for my laptop, but I have no idea where to find... And yes I already searched on google and most of the time that it brings me to canada, but I don't know battery that fits mine.

    I ordered once, but it didn't fit. They said that I should ask toshiba.

    The one that accompanies it is PA3400U-1BAS.
    I would like a battery that of at least 6 hours, or more...

    I hope someone can help me.

    thnx in advance
    JK

    Simply visit Toshiba Europe site and visit the Options & accessories.

    http://EU.computers.Toshiba-Europe.com/-> Products

    There you choose model laptop, and you will get the site with compatible parts.
    There are all batteries compatible and supported listed.

  • I can't load anything, told me the file type Wizard get safe software suggestions or you do not have a program installed that can open your file, either you are looking for a new matbe

    When I try to load anything my computer it says secure file type Wizard get software suggestions. You do not have a program installed that can open your file, or you may be looking for a new

    Hello

    · What file you load?

    · If it is saved on the computer? If so, what is the location of the file?

    · What is the service pack installed on the computer?

    · Do you remember all the recent changes on the computer before the show?

    · You have security software installed?

    1. check the file association is correct, you can see below the link to the same: how to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859

    2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • Satellite M30X-134 - I'm looking for a new motherboard

    Hello

    I m looking for a new motherboard for my satellite M30X 134! I was offered one with K000019680 number with the advice that this one is for all laptop M30X Toshiba. I m a bit irritated, because my thoshiba operator told me, that I need one with the number K000019210. Could someone tell me, if the K000019680 also goes very well with my laptop?

    Best regards

    Armin

    Hello

    Looks like you can use both of them, it is perhaps better to use K000019210. on this way, you'll be on the safe side.

  • You are looking for a new graphics card with 1 GB of memory for Satellite Pro A10

    I am looking for a new video card with 1 GB of memory, preference but is RIMM memory ram in my office, but has a different type of memory in the description of the video cards.

    Is it important at all, the video card would work always?
    Thanks 1million
    Stephen

    I put t know exactly what you want to do, but I assume that you need this card for an upgrade.
    New bad guy! Laptop graphics cards are often fixed on the motherboard and cannot be deleted!
    In addition, you must know that the mobile graphics cards are simply different and you can't compare these chips with adapters for desktop PCs.

    Best regards

  • Looking for a new lens

    I have a T1i and am looking for a new lens for an upcoming trip to Italy.  I am currently using a 28-135 as my lens every day and wonder if it is better to use as my daily lens out there to be able to capture the sights.  I'll be bringing in a 50 mm fixed, but do not want to be bogged down with too many Lenes

    The EF 28-135mm f/3.5-5.6 IS USM is a great lens.  I'd be willing to take just about anywhere.

    You said that you have a 50mm f1.8, I think.  I would take what you have and add the EF-S 10-22mm f/3.5-4.5 USM or the new lens EF-S 10-18mm f/4.5-5.6 IS STM.

    But the EF 28-135mm f/3.5-5.6 IS USM and the 50mm f1.8 will cover "more" than what you need.

  • Looking for driver PCI device

    Hello

    My friend's daughter's boyfriend decides to clean up his laptop (with XP) and removed all kinds of things, that it should not have.
    I managed to get all the drivers and back stuff and work well except for one annoying thing. Whenever the machine restarts the 'found new Wizard"starts looking for PCI device, but then cannot find the driver. This happens each time twice.

    This PCI device with a yellow cross in Device Manager under system devices so it's a bit strange with the XP installation disk, is not that it is. I searched on the net and you have to pay for the driver. But because we don't know what it's for, I've disabled in Device Manager and I check 'do not ask for this new' in the wizard. But the Assistant appears twice on each reboot.

    Ideas please!
    J

    Yeay I think it is solved!. I noticed after installing all the SP3 update the new found material now sought device Modem, not to PCI and more. So I went ahead with it and who seemed to have done. More no errors in Device Manager and no new no found Hardware Wizard when you restart.

    Thanks for all the answers because they are really helpful to know

    J

  • Looking for Driver of instruments Boonton 9242

    I'm looking for an instrument driver for a voltmeter of RF Boonton 9242. Any help is appreciated!

    Is this consistent SCPI instrument? If so you don't necessarily need drivers for the exact model.

    SCPI defines interfaces for several types of instruments - including voltmeters.

    Mike...

  • Looking for driver for my multimedia keyboard Microsoft 1. 0a in Windows 7__

    MS keyboard driver natural Multi-Media for windows 7

    Any keyboard works as a key 101 unit, but without the support of suitable driver, additional buttons may not work as expected or at all. I ran into this situation personally, but as I rarely use keys in addition to the standard layout key 101, I don't like... :-)

  • Hello, I am looking for driver for card reader memory vgn-fz250e for win7 64-bit

    Hello, I'm looking for a driver for card reader memory vgn-fz250e for win7 64 bit, I downloaded all the driver on your Web site and try, buy does not work, can you tell me which one is right, thank you very much!

    Try this one from HP:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

    Other people have said that the HP driver works fine with 64-bit Vista VAIO.  If it doesn't work no, just roll back the driver in Windows Device Manager.

  • 9850ed upgrade to windows 7, looking for driver coprocessor

    Anyone here who can help me in the right direction.

    Got a yellow questionmark on the coprosessor.

    Looking for a good driver to get rid of this problem.

    Your listing:

    Link to the plug

    Did you install 32-bit or 64-bit Windows 7?

    This driver should work for 32-bit Windows 7:

    nVidia nForce chipset driver for Win7 32 bit

    Post back if you need 64-bit driver or just look for him... nvidia.com 730 chipset nForce

  • hp support assistant for the new version update is not installed

    HP Pavilion Slimline s5306ukP; Monitor LCD 20-inch HP 2010

    My problem is that I recently had a HP Support Assistant alert to download the new HP Support Assistant for the latest features.

    Well I tried to download the update, but it would not install? I'll go through the events on the screen and maybe you can inform me as to why this update for the new Assistant support will not correctly installed, thank you.  Everything goes up to 4. Then it will skip "Download updates" and go on 5 /, but nothing happens?

    Point adjustment 1/restore... pass; 2 disk space / audit... pass. 3 / connecting to HP services for new updates and alerts... pass. 4 / download updates... N/a; 5 / install/apply the selected items... no?

    Should I have to uninstall the version that I already have the update through and re - install a new Version, or you have any patch that can be applied to make this update installs successfully?

    I have Windows 7 Home premium 64-bit.

    Hi DP - K,.

    I tried again since my last email with the problem where I couldn't find the program once it is downloaded, and alongside the race/Save little was downloaded files. I clicked on it and watched the sp54931.ex download in a folder "view and track downloads. I then told run this and asked that my administrative password. I thought here goes while I'm waiting for a response from you, nothing to lose to new and low and here is the update for the new Version HP Support Assistant downloaded correctly. Since then, I had a glance in the desktop program and there is no warning, everything is up-to-date.

    If all is well now and I can't thank you enough for all your help to try to solve this problem for me. You are the experts, and I was just lucky. I sincerely thank you.

    Best regards

    Gerry

    PS I will now know where to go if I have more problems... experts.

  • Can't install service pack 1, it says its installed, but when you are looking for a new upates he keeps repeating.

    Original title: update replication

    Hey there.  I recently did a factory reset and now I can't seem to install service pack 1... It says its installed but when I search for new upates I get the same so far again and again and again.  any ideas?

    I don't think it is a good update of the service pack, a because it was only 1.9 MB, but every once its installed, I look for new updates and get the same thing.  its driving me crazy.  I can't keep getting my system at a speed without this service pack

    Hi Jools101,

    You can try the following steps and check if it helps:

    Method 1:

    You can check the update history if the Service pack is installed or not. If impossible to install, then checkfor codes error.

    a. click Start, all programsand then click Windows Update or Microsoft Update.

    b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

    c. double-click the update has failed to check the error codes.

    For more information, see the article:

    See the Windows updates are installed

    Method 2:

    You can check the article to reset the Windows Update components and check if it helps.

    How to reset the Windows Update components?

    Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information, you can view the article:

    Back up the registry

    Also see the article:

    Windows Update or Microsoft Update repeatedly offers the same update

    Method 3:

    You may also refer to article and check if it helps:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    For more information, see the article:

    Learn how to install Windows Vista Service Pack 1 (SP1)

Maybe you are looking for