Device problem: "Master UDS Bus of Kernal USB driver software Bus by TCP is not installed. Looking for driver fails.

Similar Questions

• Where can I find Master UDS Bus kernel USB driver software Bus by TCP?

  I cloned just my laptop to another laptop similar. I reinstalled all the drivers that came with the laptop recipient... but apparently not the one for the UDS kernel USB software Bus Master Bus by TCP and Windows 7 could not find one on my computer or online.

  Maybe

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/device-problem-driver-for-UDs-master-bus-of-kernal/c97a61ec-906F-4A72-873e-53d067b1c0e5

• PCI data acquisition and Signal controller and SM Bus controller drivers are not installed

  My laptop is Toshiba satellite L305 with Intel Pentium (R) Dual CPU T3200 2 GHz / 2 GHz.

  Rescently that he has been upgraded to Windows Vista Ultimate Edition, 32-bit operating system. Since then, my USB device wireless to connect to the internet is not worked. The Device Manager displays a yellow! Select this option for PCI Data Acquisition and Signal controller and the Bus controller. The details for the two area said that pilots are not kept.

  How can I get these drivers. I'll appreciate your help, thank you.

  Carlos

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba support at the above link

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Driver download at the link above

  http://laptopforums.Toshiba.com/

  Toshiba laptop Forums at the link above

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Access the site of the manufacturer of your laptop to the link above > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Do not install new computer USB devices.

  My computer is not install drivers for the new USB devices.  It reads very well the 'old', but doesn't recognize not new.  I try to use a portable hard drive, Verbatim 500 GB and a 4 GB flash drive Imation.  I use two devices in my netbook computer but not my office.  It says it can not find or install the drivers.  Ideas please, it's driving me crazy.

  Hi Marilyn_29,

  1. did you of recent changes to the computer?

  Method 1:

  You can try to start the fixit USB and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 1:

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and then press ENTER.

  (b) in Device Manager, expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

• SM Bus controller device drivers are not installed (code 28) XP Home Edition

  Recently, I installed Norton 360 and ran a diagnostic report which found the device SM Bus controller drivers are not installed (code 28).  I tried to re - install from the original disc of XP Home Edition, but he couldn't find it.  Where can I download this from and how to install iI?  Thank you.

  Hello

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you found the error code 28 in Windows XP. I will certainly help you in this matter.

  Please follow the link and check it out.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Installation problem Z5 USB driver Win7 64 bit

  Hello

  I downloaded the real driver for the Sony Z5 package. The Device Manager shows me the E6653

  but with the downloaded drivers, it will not install these. Device Manager says there is not compatible

  driver for 64-bit systems.

  Anyone who can help me?

  Thank you!!!

  Hey,.

  Sorry for the delay of the answer!

  In the meantime, I solved the problem by myself.

  However the system does not detect the driver itself, so deciced to my Xperia Z1

  back on the WIn7 64 bit system. This phone worked properly on the system.

  I looked after the Z1 used driver and after that I return the Z5 and I have manually

  Select the driver as a TPM with the drivers Microsoft of WIn7 himself and tataaaaa it

  now it works!

  Thank you all for the help guys! :-)

• HTTP connectivity from a device problem

  Hello

  I'm working on an application that works with our web server via HTTP and HTTPS.

  As it is a consumer application, we want to operate without MDS, out-of-the-box when a smartphone is purchased at retail with a web access data plan.

  I assumed that this means using direct TCP when a Wi - Fi connection is not available.

  The following code snippet prepares the URL according to the configuration, and opens the connection:

  String fullUrl = (isSecure? ("https://": "http://") + appConfig.getServerHost () + "/" + url + (bbAppState.isWiFiOnly ()? « ; (interface = wifi': "") + (bbAppState.isDeviceSide ()? « ; (deviceside = true': ' ");

  c = (HttpConnection) Connector.open (fullUrl, Connector.READ_WRITE, true);

  Details of equipment and network:

  Feature: 8320
  OS 4.5.0.81
  T-Mobile US network
  Have a data plan (unlimited web and 400 messages)
  Connection preference: Wi - Fi preferred
  No apn is not specified
  Browser and third-party applications downloaded from the App World can access internet via Wi - Fi and EDGE/GPRS with the above parameters
  

  Tried:

  1. Free Wi - Fi and EDGE: deviceside = true - get "Tunnel failed '.
  2. Free Wi - Fi and EDGE: no deviceside, only the url - get "Tunnel failed '.
  3. No deviceside, only = wifi interface - works with a Wi-Fi connection, reports "The Tunnel failed" when out of range of a Wi - Fi connection.
  4. I tried parameter APN to internet2.voicestream.com just to test - got the same error 'Tunnel failed '.  I would not use it as the browser and other applications need and work when the APN is empty.

  My question is if I'm something wrong or missing something.  My hypothesis is that third-party apps and BlackBerry Internet Service browser.  Is there a way to know?  Is there a way to disable it (for example to make sure that the browser and other applications use it)? Our company has recently become a partner of Alliance of BlackBerry, so we can apply to BlackBerry Internet Service, but I do not understand if this is necessary for consumer applications, or if the consumer applications should rely on direct TCP.

  Any help will be greatly appreciated.

  Thank you

  Sergey

  Use '; deviceside = true ', you must also specify the details of the AFN, the options of the device or in the string you provide with "; deviceside = true '.  If you do not, you will get "Tunnel failed '.

  I would like to confirm the settings for T-Mobile APN - the value that you used does not match what I found in a google search.

  Browser and other applications will use WAP 2.0 or BIS - B, requiring no configuration.  You can use WAP 2.0 - standard article for more details:

  What - in different ways to establish an HTTP connection or socket
  DB-00396
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  Recommendation - use BIS-B (service Alliance Partner) If you can, work in cases more than anything else.

• The camera USB driver

  My guard computer crashing, either go to the blue screen or gel so bad that I have to press the power button. Then windows troubleshooting tells me that the problem is due to a camera USB driver, but she doesn't tell me how to remove it. When I try to find this driver, I can't. Can someone give me some ideas on removing this driver? Please keep in mind that I am barely computer literate.

  Hello

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  If you still bluescreens then so tell us BCCode or Code numbers to stop.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Missing USB driver

  original title: USB Driver

  problem with USB driver for Vista home edition - the driver is gone and I can not find replacement, have no disk Vista - can upgrade to Windows 7 the problem?

  
  

  Hello

  The upgrade to Windows 7 may not help the problem at all. Try the top of methods down below and if
  they do not contribute and then copy the examples of "How to ask a Question" to give us more information
  to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ---------------------------------------------------------------------------------------------------

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =========================
  =========================

  If necessary after the foregoing:

  You can try a repair install or an upgrade in Place. Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• Impossible to safely remove external USB HDD - ejection of mass storage device problem

  Hello

  I have a 250 toshiba external hard drive. "When I go safely remove device and click on stop, guests me that ' ejection of mass storage device problem and try later.

  Is there a reason for this? As I have heard it is dangerous to pull the cord without stopping it first.

  This happens usually when something is always access to the USB - HDD.
  Yes, it s dangerous to pull on the cable, because you can lose some data and the file system may be damaged. But if you have a situation where you need the drive to take with you and want to just get out the cable to the USB port there is a little trick to disconnect the security apparatus:

  Do right click on 'My Computer'-> click on Hardware-> click "devicemanager"-> go into "diskdrives"-> then you need to click on the drive that is your USB - HDD-> with the right button and then click on 'Properties'-> in the menu properties of this drive, you must go on "policies" and click on "optimize for quick removal"-> and then click OK and exit this menu and all-> perform a reboot-> closing information fact. :)

  After that, it s safe for remove you your drive even if it s not ejected. :)

  Welcome them

• Problems Toshiba Ex - 320 GB HD usb 2.0 + unknown device.

  Windows XP pro Sp2
  AMD athlon 64 3500
  2gig ram
  200 GB WD HD Sata
  PCi-E 6800 GT MSI
  ASUS A8V-E Deluxe Mobo

  When I tried this out of the box, it worked fine, I can transfer files and everything, problem was that it would connect to usb 1.0. So I checked the bios the usb options have been enabled, I unplugged all the usb cables, I tried different usb, always usb ports 1 only. Ive tried to reinstall the drivers for the mobo cd and the official site. Still connected in usb 1.

  So I re installed Service pack 2, since then windows guard see the HD as unknown device now, and I can't access the HD. So yah SP2 makes things worse. I thought a restoration system, but since January 1, my previous save points seems to have disappeared.

  I can't find any drivers associated with this product on this site... Its a Toshiba 320 GB USB 2.0 external hard drive.
  Ive also tried going into win xp in safe mode, remove all controllers and usb devices, restart in normal mode, wait 5 minutes for the reconstruction of the database, then plugged back in the ex - HD, said peripheral unknown. Ive tried to update driveer with windows looking for me and myself to the research in the win xp cd and the file I386 etc..

  Hmm help?

  I intend to format my HD in a few days anyway, but I'd like get this working before cela ex - HD.

  Hello

  In my opinion, you will be very happy if someone has experience with the same question as yours because I noticed that on this forum there are a few discussions on laptop and different problems.

  Have you tried to uninstall SP2?

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Satellite A100 and USB audio device problem

  I bought "toneport ux2 line6" and it does not work with my computer laptop (dual core 1, 73GHz, 1 GB ram, Windows Vista).

  The problem is when I listen to music through this device, it looks I would look scratched CD, from time to time that there is a short interruption. The same thing happens when I'm with gearbox (software that allow you to play the electric guitar using audio device). I checked everything, including change Windows XP OS.

  I have the latest drivers for the port of your (compatible vista), I downloaded 3.5 mechanism, only toneport is connected to my computer, I have disabled all installations flashing in vista, power management is scheduled for high performance. I disable the sound card. I checked my cell phone with line6 monkey and it says everything is ok. I checked the audio device on my friend's Office, and it works well.

  I desperately need help.

  Hello Marcin

  In my opinion, you must be sure your laptop running fine and according to your assignment I do not here no problem.

  So in your case you have problem with some additional equipment or third party software. Am I wrong? If there is a problem I see no reason to seek the solution with Toshiba. You should contact the manufacturers of all the devices and software that you use. They should have enough experience with own products and they should offer good support in troubleshooting.

• No driver found for the new USB drives don't. No problem with the devices previously used.

  Hi, I can not install any "new" USB keys or USB external drives. The error is "driver not found".

  The thumb drives and external drives that I've used are working properly. The error is for the devices was not used in this machine.

  I tried to follow a tip on a site and deleted INFCACHE.1 (after creating a restore point), but it has not changed the behavior.

  Windows 7 32 bit.

  Kind regards

  Check if you have limited the available somehow drives... possibly VMWare has reserved
  the drive letters. Best is to check with the VMWare Support and forums.

  Look in Windows disk management and see if something is there.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.