All Linksys routers allow a wireless mac filter?

Similar Questions

• E3200 and wireless MAC filter will not accept the recent MAC formats

  When I go on the web interface for my Linksys E3200, Wireless > Wireless MAC Filter and try to add the MAC to my new laptop computer to work, the user interface returns an error which is the MAC address in the wrong format. I have triple checked the address and I tried adding several times without success.

  Looking at the address, I'm guessing that the beach is not what the user interface has been programmed to accept because it starts at a much higher range. The first 3 bytes of the MAC address is: 1 c: 3E:84:xx:xx:xx

  My wireless router is E3200 with Firmware Version: 1.0.04)is

  Is there any place on the site Web of Linksys I can drop a ticket?

  Never thought it would be a browser problem. I'll have to keep that in mind.

  The computer I was access to the admin of the router UI wasn't in the wireless MAC filter - highlights the filtering MAC wireless had a list of authorized Mac not refused.

  I think that the problem was because I have 6rd IPv6 configured. Some time after the validation, I needed to update the PPPoE password and got the same error. Disabling (cancellation of the configuration) IPv6 6 Dr allowed me to update the PPPoE password successfully. I've not yet returned and re-activated the MAC filter.

  Thanks for the suggestions!

• WRT600N - Wireless MAC Filter Table will not retain MAC for the Droid 2 phones

  Hello

  I have a Linksys WRT600N router and I succumbed adding our new Motorola Droid 2 to the MAC table on the Wireless Security tab.

  It allows access if I disable MAC filtering wireless and appears on the list of clients, but when I try to add the customer list or manually enter the MAC table, it does not retain it when I save it. The only thing that seems different from the MAC standard is the 1 byte

  (F8:7 B: 7 A: 76:98:22 is the MAC of my phone).

  I don't want to leave my network open and prefer to avoid using a WEP key if possible.

  Can anyone tell me what I am doing wrong or is this a bug? Y at - it a firmware update I have to apply to this effect in my MAC filter (current version is 1.01.36 build 3)?

  Oh and I'm not worried about hackers if as much as deterrence of neighbors stealing my bandwidth. To implement the keys on all my devices was too much time to consider unless a last resort. MAC filters make it also easier for me to add guests fairly quickly.

• Need to disable the wireless MAC filter to see other computers

  I have two machines Windows 7 connected by wireless-N for my WAG160N. Often, I find that, although the two computers can see the network, they do not have the other. I can temporarily fix this by disabling, then by reactivating the filter MAC wireless. Any suggestions welcome

  Try the following steps:

  # Open the browser and in the address bar type 192.168.1.1 which will open the gateway configuration page.

  # Then click on disable SPI Firewall Protection Security tab, uncheck the box filter anonymous Internet requests...

• MAC filter list giving problems on EA6500 with bridge

  Hello

  installed a router EA6500 and WUMC710 bridge.

  I tried using the MAC filter option and included all my wireless devices, including the WUMC710 bridges.  The MAC filter works great for wireless computers and smart phones.

  It also works for bridges, the bridge is accessible from the network and can be opened for installation.  However, all devices connected to the bridge are considered to be wireless devices.  No, problem, can live with that.  For example, included the MAC addresses of these devices (Media Player, desktop,...).

  Even when I've included these devices, attached to bridges, they cannot access the network or accessed via the network.  For some reason, the router seems to make a difference between wireless devices, directly attached to the router and devices are connected to the WUMC710 bridge.

  When I do not use the MAC filter, the devices work properly.

  With my old router / bridge configuration, I never knew that the devices connected to the bridge where the as wireless devices.

  Someone at - it experience with this problem?  Is this a problem with the gateway or router?

  MAC addresses that you enter for the devices connected on the WUMC710 should be the LAN mac addresses. You must also include the mac address of the WUMC710 instead of just the mac address of LAN wireless. It is the way in which the bridge is designed to work if you have the mac address filtering is enabled in the router. Got this info from this link: http://homecommunity.cisco.com/t5/Access-Points/WUMC710-MAC-Address-issues-when-using-MAC-Filtering/....

• Help cascading two Linksys routers

  Hi, I tried to cascade two Linksys routers, but it did not work for me. Maybe you could help us. The first (which has the connection of the cable modem) is the brand new E4200, and the second is the former WRT54GCv3.

  That's how I want cascading them:

  ···································································
  Linksys E4200 ----(wireless)----(Desktop PC)·······················
  gw: 192.168.1.1 ·············|--(Laptop)···························
  ······|······················|--(iPad)·····························
  ······~······················|--(Home Server)······················
  ····(PLC)··························································
  ······~····························································
  ······|····························································
  Linksys WRT54GCv3 ·················································
  (Router mode|DHCP/NAT disabled) --(wireless)----(Playstation 3)····
  gw: 192.168.1.2 ·····························|--(Samsung BD-C8500)·
  ···································································
  

  However, the WRT54GCv3 does not receive the IP address of the DHCP E4200. I also tried to connect directly (without the PLC), even specifying a static IP address on the router second, but I got the same results.

  I have to State, that I will not change the gateway IP/first router because I have a web server and game works with a static IP address and I don't want to put it temporarily offline due to adjust the network settings.

  Thanks for your support!

  I searched the forum for you and found your answer.

  Go here for cascade two routers.

• MAC filter via ACS for SSID using WPA2 PSK

  I HAV a SSID using WPA2/PSK for the safety of the L2. I would like to add filters mac via an external radius server. I just finished the configuration of the mac via external RADIUS Filter, but it does not work. PSK is supported with an external filter MAC? I am running the latest 6.X on the controller

  I came across this problem on a controller of 5508 using v6.0 - something (6.0.182 I think). Turns out be a fixed a bug (CSCta53985) in 6.0.188. Updated to 6.0.188 and used successfully ACS 5.1 for MAC filter with WPA2 PSK SSID.

  See the 6.0.188 release notes http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn6_0_188.html#wp605409

• How to allow the user to filter the report data?

  I read a lot of entries on this topic related to interactive reports. From what I can tell, the version we are on... 3.0.1.00.08, does not have the 'classic' vs 'interactive '. So, can someone recommend the best way for me to allow the user to filter report results? Specifically, the user wants to be able to see only active records, but I also want that they want to see all documents (active and inactive).
  
  Thank you
  Kristina

  Kristina,

  You can add a list "select" to your page. Calling it something like P1_LIST and add it to your where clause as...

  select
  col1,
  col2,
  col3
  from table
  where col2 = decode (:P1_LIST, '-1', col2, :P1_LIST)
  

  You can set the LOV to auto-submit or have a 'Send' button so that your report is filtered according to the value of P1_LIST.

  Also, in the properties of your selection list, set the 'Null view' to 'Yes', 'Display Null value' to something like 'ALL' (or whatever text you want) and the "Null return value'-1 (or whatever value you have in decoding).

  I hope this helps.

  -Chris

• IMAP is not supposed to retrieve emails from the server only? In my case, all mails are downloaded to my mac and I can see the offline!

  IMAP is not supposed to retrieve emails from the server only? In my case, all mails are downloaded to my mac and I can see the offline!

  His grip on my mac space, even if I'm using the same settings for my Iphone email are not downloaded to the phone and its not not using any space!

  It is often possible to access the same account using IMAP or POP.

  Make sure that your settings are correct. The account type is on the first part of the account preferences.

• New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.

• If I delete all the info on my old Mac so I can make a donation, it will affect my new Mac?

  IF I delete all the info on my old Mac, so it can be given, which will affect my new Mac?

  Follow the instructions in > what to do before you sell or give away your Mac - Apple Support

• When I open a folder with pictures an icon shows for all content, it allows to view the actual image

  When I open a folder with pictures an icon shows for all content, it allows to view the actual image

  Button start, in the search box, type folder options... Enter... click on view tab... turn off always show icons, never thumbnails... OK when finished.

• CM1415fnw ctrl panel will not allowing printing wireless (wifi) when you are connected to wired ethernet

  Panel Display control for CM1415fnw says that it will not allow for wireless (WiFi) network card while connected to the wired Ethernet cable.  Was able to get the printer to activate the network WiFi once the Ethernet cable has been disconnected. and there he has disabled the connection once again Ethernet has been reconnected.

  How this printer can be configured to allow both wireless and wired print 802.11?

  Thank you.

  Hi CM1415fnw_help,

  You can't the connected printer Ethernet & Wireless at the same time. The only option is to connect the printer USB & Ethernet or USB & wireless. It is not possible to have two networks connected at the same time. Let me know if you need help.

• Derivation Mac filter

  I have this network.

  How can I block Internet traffic to phones devices but not the traffic of the laptop?

  Cause, they are bypassing the Mac filter, due its packets encapsulated with the MAC of the netbook.

  There is a way that forces the router or switch to read the packets and found that fate is another MAC and is not in the approved MAC Table?

  filtrado.PNG

  

  There are two options from Cisco:

  • Cisco ASA with the power of fire
  • Meraki Cisco MX

• HOWTO to Setup wpa2 + aes + psk with mac-filter WLC 4402 (RADIUS)

  Hello

  I'm trying to Setup wpa2 + aes + psk with mac-filter (RADIUS) on WLC 4402 (6.0.182), with Lap - 1142

  on security, the value L2 security wpa + wpa2 and make sure MAC filtering

  Uncheck the WPA

  check the WPA2, AES, TKIP to unckeck

  Mgmt PSK auth key

  PSK ASCII marker

  L3 no

  Uncheck the political web

  AAA servers

  Select enable accounting radius server server

  It's work fine, when I use WEP with mac-filter (radius)

  but when I select WPA2 is it fail and no newspaper both WLC server and RADIUS

  Is this limitation or bug...

  Thanks in advance for your help

  This sounds like it should work.  Maybe your client likes not wpa2/aes or does not match the PSK.  I would try to associate with this same configuration, but without enabled mac filtering to try to identify the problem.

  -John