Installer Windows - no operation
I get the error message windows install is not available. I followed the instructions for the ONU No. / re registration. also, I went where services are listed and could not find windows install. any help will be greatly appreciated.
Have you tried everything listed in the following article?
http://support.Microsoft.com/kb/324516
It seems pretty much coverage of every possible step to fix the windows installer.
Tags: Windows
Similar Questions
-
Hello
My computer hp laptop pavilion fell and hard drive died recently. There were two partiions hard disk. 1 has a recovery partition which came with the laptop and the remaining disk space I formatted in a drive c: for use. After the crash of the partition on the c drive is not accessible, but the recovery partition is accessible when the disc is connect via USB on another pc. I faced the 16 GB of data from the recovery partition that has Windows 8 OS and other things. I do not got any dvd with the laptop and assume that this partition is what I use to reinstall windows on a new hard drive 8. Now, I want to know that if I copy this folder on a USB data recovery, will it boot and install windows 8 in laptop computer on the new hard drive or I'll have to do a few other steps in addition to make a bootable usb key
OK, then we will force windows to find a key for you then:
(merged to another answer link)
erekQ -
Why I can't install iTunes on my laptop with the Window 10 operating system
Why I can't install iTunes on my labtop with Window 10 operating system
Have you downloaded the latest iTunes from here and correct version
and then run the downloaded installer.
-
Re: Serial number down would work with the other Windows Vista operating system
First of all sorry for my English.
I have one question.My hard drive is broken with my recovery partition.
If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.I hope it's the same number that the front is installed on my first installation.
Hello Marcin
I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
You could test it I heard it's very rare cases it was possibleIn any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.
If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:
https://backupmedia.Toshiba.EU/landing.aspx
Concerning
-
The Windows Vista operating system on dv9000 was arrested.
The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.
How can I get my BONES restored without having to buy a new one?
lbwhorms wrote:
The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.
How can I get my BONES restored without having to buy a new one?
You may need to contact HP in your region or Microsoft by phone.
If he please go through these papers & try the above first steps:
Activation of Windows Vista operating system
Concerning
Visruth
-
Free update of the Original system from Windows XP to Windows 7 operating
I use an original version of Windows Xp and I have 1 GB of Ram and 1.8 GHz Pentium 4 processor, now is it possible to upgrade my computer to windows 7 for free? If Yes! How it should be done?
I use an original version of Windows Xp and I have 1 GB of Ram and 1.8 GHz Pentium 4 processor, now is it possible to upgrade my computer to windows 7 for free? If Yes! How it should be done?
Hello
There is no free updates for all Windows XP operating systems.
@@@@@@@@@@@@@@@@@@@@@@@@@@@
Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.
There is no update free from XP to Vista, 7, 8.1, or 10.
Forget Vista as support extended for Vista SP2 will end April 2017.
Follow these steps before you buy Windows 7; Windows 7 SP1 to support extended to January 14, 2020.
Microsoft sells more than 7; Try Amazon.com.
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
@@@@@@@@@@@@@@@@@@@@@@@@
Follow these steps before buying and upgrading (new installation) of Windows 8.1; extended support ends on January 10, 2023.
Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.
If this is not available, Windows 8.1 not install and work properly for you.
There is a lot of information in this first link from Microsoft:
Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here
"Update to Windows 8.1: FAQ".
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
"8.1 for Windows system requirements.
http://Windows.Microsoft.com/en-us/Windows-8/system-requirements
@@@@@@@@@@@@@@@@@@@@@@@
How to buy Windows 10; extended support ends 14 October 2025:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
I have a hp type copier printer scanner hp 1355. I need a driver (software) for this. If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.
Hey Fed-Up-with-HP,
Try using the brush included in the CD or download. Let me know what you find?
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
-
I am trying to add itunes to an old computer for my kids. It has the windows xp operating system. When I try to install itunes, I get an error message that says: I'm having problems with my windows installer. I don't have an existing copy of itunes on the computer that would be a new installation. How can I solve the problem? I have a new computer with windows 7 and had no problem with installation on it.
If you can not receive answers that will solve your problem, I would suggest that repost you to...
Cummunities to Support Apple - itunes for Windows:
https://discussions.Apple.com/community/iTunes/itunes_for_windows
-
Do not open programs after installing Windows update operating system Windows Vista
Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system
After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open. I don't know what to do. The only thing that still works is the Windows Media Player. I can't open Word or Excel, I can't access my photos. Open Internet Explorer is like a weird nightmare but I am able to access the Internet. I tried reinstalling my MS Office software, which did not work. I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something. Any ideas what I should do to correct the nightmare?
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understand the Extras in Windows Vista and Windows Update info is at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For questions of office:
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
Theywill help you with your office questions when repost you in the Office Forums above.
See you soon.
Mick Murphy - Microsoft partner
-
Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec. Windows Vista operating system.
Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec. Windows Vista operating system.
==============================
The following thread explains how to convert
the files to a different format... iTunes then
You should be able to import them.Need help to convert itunes to Windows Media
http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff
(Scroll to the bottom to detach the message by: musiclover101)Or... use the following freeware to convert your
already downloaded files to the .wma format.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(FWIW... installation..., you can uncheck
all the boxes on the last screen)After downloading and installing Format Factory...
Open the program and choose an output folder...
(this is where you will find your files when they are
converted)Drag and drop your files in iTunes on the main screen...
Select "while"WMA"/ OK...
Click on... Beginning... in the toolbar...
That should do it...
Good luck...
John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Windows 7 operating system
When you turn on the computer, I get the login screen normal showing my profile name and asking my password. When you enter the password, I get:
"User profile Service service has no connection. User profile cannot be loaded. »
Then the machine disconnects me and returns to the request for the password screen. Unable to get beyond this point.This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.
1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.
2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.
3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:
NET user administrator / Active: Yes [Enter]
[Note: do not enter the brackets!]
If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. Or you can make a bootable DVD of Windows 7 repair of the file on this link:
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/
Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.
Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.
4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.
5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
There is a line for each profile. If a profile is bad, check:
(a) that the name of the key does not stop in ".bak" (remove .bak If it)
(b) that the RefCount value is 0 (change it if it is different)
(c) that the State value is 0 (change if different)Make the necessary changes, close Regedit and try to connect as this user.
6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!
Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:
Start Orb > Search box > type: cmd
When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:NET user administrator / active: No. [Enter]
Exit the command prompt.
General recommendations for creating users in Windows 7
You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.
In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:
Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UACUncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
MS - MVP - Elephant Boy computers - don't panic! -
Needing extra space, I bought a new 500 GB western digital drive. I removed my old drive, installed the new and inserted my windows 7 professional 64 bit cisk. Booted from the cd and installed windows. After crossing it spins the facility and shut down to restart, I got a message tht says "Windows is unable to complete the installation. Please reinstall. I did it twice with the same result.
What could be wrong. Thank you.
Hello
Thank you for writing to Microsoft Communities.
Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.
1 are you install windows 7 operating system of the Windows full version Setup disk or recovery disk?
2. where did you get the installation disc?
3. you try to reinstall the old disk operating system?
I suggest you to see the link and see if it helps.
Windows 7 installation problems: frequently asked questions: http://windows.microsoft.com/en-IN/windows7/Windows-7-installation-problems-frequently-asked-questions
If so please answer us, we can help you better.
-
Can I use a disc of Windows 7 operating on a second computer if I uninstall it the first computer?
Installation of Windows 7
Can I use a disc of Windows 7 operating on a second computer if I uninstall it the first computer? Thank you!Yes, if it's a retail store bought the full version or upgrade to Windows 7.
-
I bought a laptop broken at a friend's House. It is not used for the operating system windows 8 and wanted to use the Windows Vista operating system. Son of friends put in place this laptop for it, which was new when she bought in a retail store. Is there a way I can find out whether all the partitions have been deleted during the installation of Vista? I still see window 8 logo that I sign as an administrator user on this laptop.
When I log on this computer, the previous owner of the screen name is the only one that appears. I go in Control Panel, click Add another account, then I see the screen name I posted. I could use the WiFi from my PC at home that Win 7 OS.
When I started working with the laptop, I was able to bring control of the camera. Now I thought that the version that I use does not allow this operation. Be happy with any Positive help with my problems.
Thank you
Phil W.
Hello
Start > type CMD
Right click on CMD and select run as administrator
Type diskmgmt.msc
Press enter
This opens where you can view the partitions on the disk management system
Who has installed Windows Vista, your son or friend? Fact that they create a dual boot environment or reformat?
http://www.technorms.com/8438/Windows-8-create-hard-drive-partition
Multibooting requires separate partitions on the hard drive of your computer for each operating system. To create and format a partition, see create and format a hard disk partition.
To check if a dual boot system in place, start > Type msconfig
Click on the Startup tab
You see two operating systems listed? Windows 8, Windows Vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/how-to-change-default-OS-for-dual-boot-system/
I think that Windows 8 has the following partitions
400 MB Partition Recovery (contains recovery information dated from before my upgrade)
- 300 MB EFI System Partition
- 350 MB Partition Recovery (contains information for recovery of my upgrade)
- 17 GB Partition Recovery
- 220 GB of Partition primary
Windows Vista has drive C and drive D
Done reformatting refers to a hard disk or partition that already has been formatted or that contains data on it. Reformatting a disk deletes all the data on the disk.
-
As indicated in the title, you can do a BIOS in Windows 8 update while on a Windows 10 operating system?
I have a Phoenix desktop h9-1150 and am trying to install a new GPU GTX970. There is no updated BIOS for Windows 10 at this time, but there is an update of my current BIOS 7.07 for Windows 8 OS. Can I do that Windows 8 updated safely?
Normally the flasher will check to verify the operating system, but I can't on this one. It does not separate out ROM file, even if it does not check if the operating system you can always extract the file BIOS and flash BACK. I would try it first in windows. It will tell you if there is a control in place.
Maybe you are looking for
-
This happens on each image on a page. Why anyone in their right mind would want to tweet, google, gmail and facebook every single picture on all the web pages they visit throughout any day given? The tile that just obscures the information I actually
-
How can I use on my M40X with WinAmp media buttons?
HelloToday, I received my M40X and I have a question.There are 5 media as left button on the keybord (CD/DVD, play/pause, Stop, )Is it possible to use them with WinAmp?With the help of Toshiba, I had the CD/DVD button used to start WinAmp (by allows
-
AY 005tx: graphics driver problem
I bought a HP 15 ay005 tx. It's a BACK Machine. Everything works except thr AMD Radeon R5 330 graphics card. I currently installed windows 10 32 bit on it. I believe that the graphics card does not work correctly. "When I click on AMD Radeon settings
-
Breach of security - unauthorized account
Here is a situation of breach of security which I find disconcerting today 20/12/2014: Today 20/12/2014 I am not access the forum or my browser. Instead, I fill out a form in Word. When I print, my computer has print the form so an OPEN account Lenov
-
How to set up my battery Z580 settings to load completely?
Hello I bought a new Lenovo Z580 this last June. Shortly after I started using it, a system message popped up telling me that since I often have my laptop plugged in, it might save battery if I let the system change my settings so that the battery do