INSUFFICIENT RECEPTION INFO - error in bills BC
Hi allI installed IPM 11.1.1.6.0 and all its associated components. All the components are properly integrated. without BC OFR streams works very well.
I'm trying to generate invoice in EBS via the OFR stream for invoices IN. type. Acht is already created in the EBS.
When we treat the XML, it goes up to composite InvoiceImportAndValidation. In response, it gives under INFLUENCE
< P_HOLDS_ITEM >
< HOLD_LOOKUP_CODE > IPM_INVALID_RECEIPT_HOLD < / HOLD_LOOKUP_CODE >
< HOLD_REASON > RECEIVED INSUFFICIENT INFO (line 1) < / HOLD_REASON >
< / P_HOLDS_ITEM >
and the instance is routed back to Bill for treatment. In my view, that the PO is not generated correctly. As I can generate invoices without BC correctly for the same provider, the provider must be configured correctly.
Thanks in advance.
Kind regards
Love
Hi love,
There is a "validate_invoice" stored proc that creates this wedge in EBS. The condition which decides whether to go for the validation of the receipt or not depends on the value in the table of EBS, essentially depend on the configuration of the PO. Under query gives this information.
SELECT MATCH_OPTION
OF PO_LINE_LOCATIONS HAS
WHERE A.PO_HEADER_ID = 110568
The value of PO_HEADER_ID in table PO_HEADERS_ALL or PO_HEADERS can be found. If you PO_HEADERS, you must define the strategic context
EXEC MO_GLOBAL. SET_POLICY_CONTEXT (THE OF ', 1733);
Ideally, if you don't want this waiting to be placed or valid, you must use the PO for which match_option is NOT 'R '.
Kind regards
Vikrant Korde.
Tags: Fusion Middleware
Similar Questions
-
Original title: out of disk space.
Reference Dell dem 2400 from ' 05, was important to itunes to ipod via cd in cdrom, has ran out of mem, connected wd my self indispensable passport back usp port for the rest of the songs, nothing happens, error message constant "insufficient disk space" helps...
Reference Dell dem 2400 from ' 05, was important to itunes to ipod via cd in cdrom, has ran out of mem, connected wd my self indispensable passport back usp port for the rest of the songs, nothing happens, error message constant "insufficient disk space" helps...
This forum does not the letter nor did pay extra for punctuation. Please try to write in complete sentences.
Simply connect your external drive to your computer will redirect the import of files from the CD. You don't always have enough space on your internal drive - at least that's what seems to be the case of the incomplete information provided.
Full error messages are needed to accurately diagnose problems.
There are a number of things you can do to- temporarily - free up disk space. The only real solution, however, is to get a bigger internal hard drive. You can move the data to your external drive, but if it's the data that you use frequently, slower access times may annoy you. Therefore, I do not recommend that you move your My Documents folder in its entirety on the external drive, but you can certainly do this by following the related instructions. You can also move your iTunes folder there (http://support.apple.com/kb/HT1364)
- You can run Disk Cleanup (start > run > cleanmgr > OK)
- You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
- You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
- You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
- You can reduce the size of your Internet browser cache (depending on the browser that you use)
- You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
But none of these answers you will earn really large amounts of space for very long. The term solution time is a bigger hard drive.
In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive. If you want to move an application, you will need to uninstall and then reinstall it specifying your external drive as the installation location. You can not simply move the files.
-
Reception (50) error code when you try to restore the iPhone 5 c stuck in recovery mode
I've tried everything and my phone will not fully restore. The error code is 50 and not -50.
If you really "tried everything", then your next step is to make an appointment at the nearest store Apple Genius Bar to get the device rated for a hardware failure. Good luck.
-
Windows update-reception 80240016 error code when trying to update.
80240016 error messages
Hello
Please mention what Windows you use every time you post a problem on this site with some details for your computer.
To troubleshoot your error, you can try to work with the following of article http://support.microsoft.com/kb/957307.
If this does not work, you can also try following steps:
- Open Services from the control panel (--> Services administration tools)
- Stop the following services Background Intelligent Transfer Service, encryption services and updates (automatic updates if you are running Xp) Windows.
- Rename SoftwareDistribution.old folder C:\Windows\SoftwareDistribution of C:\Windows
- Rename Catroot2 to C:\Windows\System32 Catroot2.old
- Restart the Background Intelligent Transfer Service, encryption services and services updates Windows (automatic updates if you are running Xp).
- Search want it.
Concerning
-
Info-error of Java 1714 repair
How to fix the error 1714
How to fix the error 1714
Make you a statement or ask how to fix Java on the MS Answers forum?
Was your search your problem:
http://www.Java.com/en/download/help/error_1714.XML
Error 1714 is an Install Shield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.
-
change the title: I am running windows XP, I have a runtime error visual ProgramC:\program runtime library. .
Having recently loaded a CD Pentax Digital Camera Utility, which works very well, however removed maintenance system to remove programs. Then tried loading it again, with a Runtime Error PTXUTL40. Exe. Declaring that this application has requested the execution to terminate in an unusual way. Tried several times with no joy. However I can load on a small tablet separate from the main PC, please if possible help me with this problem.
Anita
Hello
Good to know that the problem is solved. Do not hesitate to contact us if you have a problem with Windows in the future.
-
Reception "0xC004D401 error" while trying to activate Windows Vista.
I have a Vista desktop. I am also a '0xC004D401 error', how to fix this? I need help. Thank you.
As soon as you want :)
When uninstall you AVG, you must also run the cleanup tool before installing BitDefender - this prevents the remains of her clutter.
http://forums.Avg.com/ww-en/AVG-forums?sec=thread&Act=show&ID=170477
-
Hey, I'm trying to upgrade my Vista Business OS to Windows 7 Enterprise. During the 5th stage of the upgrade, i.e. While "transfer files, settings and programs", the process stops at 72% and a message error that "not enough disk space. I have more than 20 GB on my C: drive. I tried to go through different solutions of circumvention, but noon seem to work. Any help will be appreciated.
For lack of other options, I finally decided to do a clean install. Result: great! Looks like my laptop is brand new, and I have total control over the programs I want to install and the junk that I finally got away with. in any case, thanks for the answers!
-
OfficeJet J3680 - reception complex error when printing
Hello
I recently bought an of Officejet J3680 all-in-One Office Depot in Escazu, Costa Rica. I had no problem to install on my computer, and in general, the unit seems to work fine. However, when I try to print, I get an error. Happen when you try to print across several applications. I'm not paste the entire error, but I put the part below. I use a MacBook Pro with Snow Leopard 10.6.6 Version If that helps. Any thoughts on why this does not work, and what I can do to make it print?
Process: PrintJobMgr [17463]
Path: / System/Library/Printers/Libraries/PrintJobMgr/happy/MacOS/PrintJobMgr
ID: PrintJobMgr
Version:? (???)
Code type: X 86 (native)
Parent process: cupsd [17372]Path of the PlugIn: /Library/Printers/hp/aio/IOMs/AIOFaxIOM.plugin/Contents/MacOS/AIOFaxIOM
The identifier for the PlugIn: com.hp.print.iom.AIOFax
Version of the PlugIn: 8.0.4 (8.0.4)Time/date: 2011-02-02 10:59:18.725-0600
OS version: Mac OS X 10.6.6 (10J567)
Report Version: 6Anonymous UUID: C4D862D4-9303-4ADC-ABFF-B2316C2B5030
Exception type: EXC_BAD_ACCESS (SIGBUS)
Exception codes: KERN_PROTECTION_FAILURE at 0 x 0000000000000000
Crashed thread: 0 dispatch queue: com.apple.main - wireIf you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":
Go to Applications/Hewlett Packard / click Uninstall HP
Click on continue
Highlight your device in the left pane
Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
Click on continue and let it finishRestart your Mac
Now run a software update.
Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.
-
I just bought Photoshop Lightroom - I have Windows 7 system with service pack 1, but I get an error trying to install that "windows vista is not supported. I'm not able to install - how to spend it?
See link below:
-
insufficient disk space error, but have enough disk space
I have an update for illustrator that is shown in my creative cloud. I tried to install the update but I get the error message that I don't have enough space on my hard drive but I have 85 GB of available space.
I just found a post on the forum who has the answer to my question.
Link to the forum: not enough space available on the disk without a title.
-
Error message 'problem to apply tags/info '.
When trying to drag and drop images of all local media Albums of 'problem to apply tags/info' error message is recent but persistent. I always moved images to albums by drag-and - drop.
Brian,
Thank you. Problem solved.
George Thomson
-
error rorta02.dll and oceroyuyevev.dll error
Reception following errors:
C:\Users\Dennis\Appdata\Local\rorta02.dll
C:\Users\Dennis\Appdata\Local\oceroyuyevev.dll
I get these errors when I boot. It doesn't seem to affect how the computer works. However, I can't find anything on these DLLs anywhere on the net.
Hello
Unable to find these files on Google so you probably dodged some software malware and you need to do
a very thorough control. Message on how to remove the error message if still it y
After the audits of malware.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
Hello
I have a problem with a programmable power recently bought Sorensen XG 60-14. In my application (LabView 2012), I use this power to fuel a cooler through regulation PID Peltier. My code sets the current performance of the PSU to the all the 1 sec. My application works without any problem for days, until like 4-5 days, and then I get a crash.
The first problem is that, when I get the error, the LabView gives a pop up window asking continue so or stop? This is really not good, since my code should stop completely in case of error (I wrote my code in a way if there is error, he must close and stop all other material, like other power supplies). I used the official "lvlib" Sorensen to make my own screws, see set in the zip file.
In my code, I first tried to use the "configure Output.vi" Sorensen VI official with very little modification, but usually, I got errors and accidents after 2 or 3 days. So I decided to get rid of dish-sequence-structure and also unnecessary allow exit on every play, so I set it too.
Now I use the Output_Sorensen_XG.vi 'configure', and I call it the "Sorensen_XG_psu.vi." So in my high level VI, I call these screws with 1 Hz frequency.
First, I here insert the photo of the first error that I consider a pop-up error:
After clicking 'continue', I get the following error, but I guess that the first error above is one, as the following is generated due to closed resources?
What can be the problem? I created leak memory somehow? I should close some refnums in the Output_Sorensen_XG.vi 'configure' after each iteration, there is a lot of property nodes?
I hope someone can help me... thanks a lot!
EDIT: actually, I realized that the second jpg is the info error relevant, since the first is just a mistake of a Subvi, where I try to shut down the power supply in case of error, and that the part is not connected via wire error.
So the relevant error is second, the "refnum zero or removed ' a. But how the refnum evaluates to null?
Martins wrote:
In fact I see only two references: 'Out' and 'system '. The reference called "AmetekXGLib.IAmetekXG" is available as an entrance tunnel and is also in the exit tunnel that you see. When I call the "Sorensen_XG_psu.vi" in init mode, I get this ref, and eventually I simply store in a shiftregister as you can see...
(1) IAmetekXGOutputs
IAmetekXGOutputChannel 2).
IAmetekXGSystem 3).
4.) IAmetekXG - which you reuse via the shift register
No closed references cause Excel to continue running in the background that's why I notice them.
-
Error 7 Build Error - file not found
I am trying to build my software on another computer on the network. I am able to access the directory that I install and the program is not showing generation errors (all VI are not broken). This error only occurs when building. Any suggestion would be great.
Thank you
Nate
The Build failed
Possible reasons:
A VI included or one of its dependencies does not exist. Open all the called start/exported/dynamically screws, recompile them (Ctrl + Shift + click the run arrow) and keep them to update their dependencies.
Extended details:
Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:
Error 7 is is produced at ABAPI Dist report read link Info Error.vi-> ABAPI Dist Cmp parameters of disk Hier.vi-> ABAPI get File2.vi settings-> EBEP_Invoke_Build_Engine.vi-> EBUIP_Build_Invoke.vi-> EBUIP_Build_Rule_Editor.vi-> EBUIP_Item_OnDoProperties.vi-> EBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reasons:
LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer.
=========================
NOR-488: There is no Board of Directors.
Problem has been solved-need to re - compile all VI and to link some missing files.
Maybe you are looking for
-
Is it possible to change or add quick notes with the i465 clutch?
-
HP OFFICEJET PRO 8600 - PRINT CONTENT IS BIASED
Whenever I have print something the printed content out on the page at an angle at the edge of the page. (rather than being aligned with the edge of the page). Please can you help.
-
Original title: nothing on the screen, just wallpaper I can't turn on my computer, and when I click on my user name I have to enter a password after clicking on enter nothing appers only my background wallpaper but not the icons, the taskbar or anyth
-
Ethernet driver for hp 2000-2c10dx
Hi, I have a laptop HP 2000-2c10dx. I installed W7 x 64 dual boot with factory installed W8 x 64. My problem is that I couldn't find the ethernet (realtek) for W7 driver also pilot wi - fi button does not work. Help, please. For realtek ethernet cont
-
A chat feature would be useful, when you need assistance with your first Page?