intalled for phase printer driver xerox 3124 does not test page print

Similar Questions

• Drive DVD W520 does not not with Windows 10

  After the upgrade to Windows 10, the DVD drive no longer reads disks on the W520. It still works under Linux, so it's probably a driver issue. I checked the drivers on the Lenovo site and there is no DVD driver. The power player and opens but nothing is read off the drive. It does not appear in 'my computer '. Device Manager shows the drive with a caution triangle icon. Attempt to automatically update the pilot says that is already the newest one installed. Solutions Center Lenovo says that the driver is disabled. Deactivation and reactivation of the reader do nothing. How can I solve this problem?

  Looking for more in the Device Manager, I found that there is a registry error (code 19). Follow this guide and it fixed it.

  https://support.Microsoft.com/en-us/KB/929461

• I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

  I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

  The requirements for the SuperDrive Apple USB are:

  The system configuration required

  Compatible with the following computers:

  MacBook Pro with the Retina display

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Added raw lun mapped as a new hard drive, but VM does not see it.

  ESX 4.0 with two Windows Server 2008 virtual computer running.

  Created with SAN volumes and put at the disposal of the ESX host.

  I went in with my client vSphere virtual machine settings and added a new hard drive > mapped raw lun, stored with VM, physical and everything seems to set up correctly after hitting good. I also increased the size of the other two disks on this virtual machine. I rebooted the VM and connected to the server to find that he does not see the new drive, or he does not see the new size increases for other readers. I rebooted the host and yet, nothing new.

  What have I done wrong? Why these changes are not recognized by the virtual machine?

  After the increase in the size of disk or adding new disks, you must go the the VM Windows disk management and resize or format/partition/boot disks.

  André

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• I'm looking for a link to XP SP1 does not require a network connection to install

  I'm looking for a link to XP SP1 does not require a network connection to install

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Restart twice.

  5 install the SP3. Restart twice.

  6 switch to IE8. Restart twice.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• How can I download the drivers for a processor that crashed and does not have access to the internet

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  First of all, please note that you mean a computer, not a cpu.  "CPU" means "Central processing unit". In modern personal computers, the CPU is a relatively small chip, an integrated circuit. It is located on the motherboard inside the computer case. It is not the case itself, nor is it the total computer, which includes the case and what it contains.

  Download drivers on another computer and put them on CD or thumb. Bring them to the computer in question, and then copy them there.

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade