Integer value of cursor

Similar Questions

• Slider with integer values only?

  I want to create the slider which accepts integer values only.

  For example: 1.0 to 5.0, step: 1.0

  How to do this?

  In a Word, DIY there is no entire cursor in Cascades.

  Wrap the cursor (ongoing) standard floating point in your own class.
  Listen to the signal valueChanged (float) and immediateValueChanged (float).
  Make your own signals when the cursor moves to one discrete value to another.
  Fix the position of the cursor continues to nearest discrete value in the signal valueChanged (float) handler.

  For each continuous cursor position you will need to find the nearest discrete value.

• formatting of scale to display only integer values

  I'm trying to simply display a graph that has the integer values only and therfore that only integer values appears in the balance to alleviate the congestion of the eye on the chart.  Someone knows how this fundamental?

  If wire you an integer to the graphic terminal data type it should change the entire representation and take care of the problem.

  You can also set numbers of precision in graph to zero properties.

  Lynn

• Read integer values to worksheet and display the values in a table

  Hi all

  I have integer values to read from a worksheet and display them in a table. I uses 'Reading of the spreadsheet file' mode 'integer '. I want to display these values in a table. The problem is the table takes only 2d-array of string as input but not an integer.

  It works fine if I change 'Worksheet file playback' mode to 'integer' to 'chain', but I want to read integers and must use integer values for calculations more. Please give suggestions on the display of integers to a table.

  Thank you.

  Do not take not piece-by-piece just convert as a whole. See the attached example

  

  Good luck

• Get integer values of visa series read

  Hello

  I am having trouble getting the integer values correct of the reading series string that I get. For example if I send 0P3 I get 48,112,51 as elements of an array. I used the string to byte array function to convert the string I've read on the serial port. The values are the ascii equivalents. How can I get 0, p, 3 in the back? I need that the program does a length check and crc going wrong because 0 is now considered to be 48.

  concerning

  Bastien.

  
  

• 'valid integer value' does that mean?

  When you print a file created by the Canadian tax preparation software, in PDF format I get "A00000000 is not a valid integer value"... What does this mean?

  An integer is a number. Whatever this by a letter or symbols of any kind is not an integer. At some stage in the operation, the program expects an integer and becomes something else instead.

  You can print on paper of a PDF document created by the tax software? Or are you trying to take the tax info and put it in a PDF? If you print on paper, you can find it easier to get help from the society of tax software. If you print on paper and that the PDF file was created successfully, I would try to print the PDF file from another computer, or to another printer, or preferably both.

  Assuming you are printing on paper in PDF format, I would see if you can print from another PDF file. In addition, you can check your printer - either update, driver or reinstall it. Drivers, sometimes being damaged.

  Let us know is it y of the above works.

• Flashplayer ' $' is not a valid integer value

  I've just installed and started playing with Captiveate2 (since her RoboDemo5). I tried the found the branch tab and started playing, but when I asked for a slide to open another project I get this error message (Flash player ' $' is not a valid integer value). Any suggestions?
  
  On a plus note what this product! He continues to improve.
  

  Ah, all becomes clear! Thanks for the help with this it's much appreciated.

  (Now, I'll go off and see what I can break, maybe a beta-tester (joke))

  See you soon

  John
  

• I hope that the answer easy. How can I get a cursor to only have integer values?

  I try a slider from the example page to allow the chooice 5-100 users, but the slider also allows values to be doubles. Is it possible to limit the slider to lock only on values when they double?

  I'm not sure, but have you tried minorTickCount and snapToTicks?

• The values of cursor two corresponding and insertion into tables

  I ' am using sql developer oracle 11g.

  I have 3 tables called

  PRODUCT_NOTIFICATION

  RECORD

  PCS_NOTIFICATION

  --------------------

  PRODUCT_NOTIFICATION

  ID	TITLE	Message
  21	sale	50% discount on all brand products

  RECORD

  ID	REGNAME	ACTIVATIONCODESTATUS	MOBILENUM
  747407931107	TEST	THERE	12345
  39717371107	TESTuco1	THERE	6789

  Now, I want to take only the message of product_notification table column and

  pick up the registered customer of registration table where the activationcode_status = 'Y '.

  PCS_NOTIFICATION

  Output of desire in the PCS_NOTIFICATION TABLE

  ID	MOBILENUM	Message
  1	12345	50% discount on all brand products
  2	6789	50% discount on all brand products

  THEN insert the message in pcs_notification.

  It is the procedure goes as...

  create or replace

  PROCEDURE sp_notification)

  p_out_msg OUT VARCHAR2

  )

  AS

  CURSOR C_product_notification

  IS

  Select the description of product_notification;

  -Search for registered customer

  CURSOR C_registered

  IS

  Select * from registration where activation_code = 'Y ';

  for k C_INSERT

  LOOP

  THEN

  BEGIN

  If C_product_notification = C_registered THEN

  INSERT INTO PRODUCT_CLOUD_NOTIFICATION VALUES () - stuck here

  ---------------------

  ---------------------------------

  --------------------------------------

  Goal is to send the generic message for every individual mobile numbers of registered customers.

  Help, please...

  Create a sequence object to fill PCS_NOTIFICATION.ID. allows you to call him PCS_NOTIFICATION_ID_SEQ.

  Now all you need is a simple insert statement.

  insert into pcs_notification (id, mobilenum, message)
  select pcs_notification_id_seq.nextval, r.mobilenum, pn.message
    from product_notification pn
    cross join registration r
   where r.activationcodestatus = 'Y';
  

• [ADF, JDev12.1.3] How to pass an Integer value sets to a workflow, and then it reads a bean?

  Hallo,

  for a test, I need to set the value of an entry of a stubborn workflow used as dialog...

  

  Then in the bean that is associated with a known fragment of the btf, I need to read the value, so I used this code...

  Integer protocol = (Integer) AdfFacesContext.getCurrentInstance().getPageFlowScope().get("protocol");
  

  This exception triggers...

  javax.el.ELException: java.lang.ClassCastException: java.lang.Long cannot be cast java.lang.Integer

  What's wrong?

  Thank you

  Federico

  If I remember correctly, in JSF that EL has Long type so this probably also applies to ADF.

  For example, you can cast a Long or you can use the type field (from some managed bean) an integer as an input parameter.

  Dario

• set the height of the rows in the table according to the integer value

  Hello.
  
  jdev version - 11.1.2.3
  
  My requiremnt is that I have an integer input value, when I provide a value for it assumes that 10, then only 10 lines should be visible on the rest of the table should come when scroll us. Basically, I want to adjust the height of the lines on the change in value of my entry value providied.
  
  Thank you

  If the counter returns a number, you can convert entire

  public void button(ActionEvent actionEvent) {
  Number n = spinbox.getvalue();
  table.setFetchSize(n.intValue());
  }
  

  Timo

• To retrieve a value of cursor

  Hello
  
  I'm new to the concept of cursor. I need help on the underside.
  
  I have a package that has two functions and two procedures. In one of the functions, I'm trying to retrieve a row count value.
  
  For example:
  There is a select query that retrieves only the number of cases. There will be a single record and data are simply the number of lines. I believe that we can use the cursor to retrieve the value.
  
  My request is, my function should return the number of lines given by the select query. I tried with % number of lines, but it's always display rowcount amongst (taking the last record). I think we need to browse or increment a variable, but do not know how.
  
  All I need is my function must return the number of lines given by the select statement inside the function. I use sql and Oracle database 11g developer. Could someone please help with that?
  
  Thank you.

  % Rowcount cursor will only work inside the cursor loop means cursor must be opened...

  open cursor...
  fetch into...
  somevariable := c%rowcount;
  close cursor;
  return somevariable;
  

  most of the cases that this can be achieved with using the slider using the all latest features like bulk collect...

  select col bulk collect into arrayvariable
  from tablename.( what ever the query)
  
  return arrayvariable.last or arravariable.count..
  

  Published by: Kiran on 23 April 2012 22:09

• Passing the integer value in the command prompt

  Hello world
  I'm trying to pass a value of smallint data type (ex: 2000) from a prompt page with a filter. When I try to display the result, I get an error;
  Error to Pierce information: SELECT C1, C2, C1 WHERE OF SH = variable1
  ODBC driver returns an error (SQLExecDriverW).
  State: HY000. Code: 10058...
  Unresolved column: 'variable1 '. (HY000)
  
  Note: I tried CAST (C1 int) for the formula column, but it did not help.
  
  But, I tried changing the quick column with non-entier, such as product name and pass the variable, the value is passed to the column filter product name and it worked.
  
  My goal is to pass a variable (integer) presentation and apply an expression to the variable (variable1 - 1) and use the values of the two variables for my filter condition.
  Simply, I'm looking for how to move entire prompt to filter and apply the expression to the variable passed.
  
  Hope you guys will help me solve this problem.
  
  Thank you
  Tom.

  :)

  HRH means... Right side of the equality operator.
  Click on the particular column filter option > advanced > convert this filter in SQL

  Now, in the right part of the equal operator, change it to

  cast('@{variableName}' as int) - 1
  

  try to keep the single quotes for variable and check... as I mentioned above

• long integer value - setting the date of entry

  Hello

  I'll send a calendar event while recording up to a database on my server.

  When I retrieve this entry and try to rebuild the entrance on the device, I have problems with starttime and endtime.

  I use Long.parseLong (myStartTime) (in order to define the start time of the new entry) and get a number format exception.

  So after struggling to find a solution, I tried to manually set for the tests.

  myStartTime = 1283778000000; This is the beginning of the time value of the downloaded

  I get the whole number too big.

  Someone at - he also experienced difficulties affecting a schedule start time entry like this?

  Please can someone offer a suggestion?

  Thank you Alex

  Have you tried just Long.parseLong (String)? Who will use the base 10. (Or you can specify 10 as the radix).

• query to get the maximum integer value of varchar columns

  I have the following values in the column of type Varchar.
  
  USR_LOGIN (VARCHAR2)
  -----------------------------
  50
  52
  53
  55
  57
  123
  111
  145
  XELSYSADM
  TESTUSER
  USER123
  12TESTUSER
  
  But I need to get the result as 145.
  
  Can you help me with the sql query?

  Maybe it's

  SQL> with t as (
   select '50' usr_login from dual union all
   select '52' from dual union all
   select '53' from dual union all
   select '55' from dual union all
   select '57' from dual union all
   select '123' from dual union all
   select '111' from dual union all
   select '145' from dual union all
   select 'XELSYSADM' from dual union all
   select 'TESTUSER' from dual union all
   select 'USER123' from dual union all
   select '12TESTUSER' from dual
  )
  --
  --
  select max(to_number(regexp_substr(usr_login, '\d+'))) usr_login from t
  /
        USR_LOGIN
  ---------------
              145
  1 row selected.