imported from sovereign wealth funds, get the main swf data

Similar Questions

• Export of sovereign wealth funds, get the thickness of line precise CS5

  Hello indesigners,.

  I recently tried to create a CV interactive little, nothing complicated, just an index page which links to the chapters.

  In the identity document, I use lines with very little wight (0.25 pt or 0.25px, depending on the print mode or the web). When I export to a SWF file the lines are always much thicker than they really are. It seems that the minimum thickness, it can show is perhaps, 1px, while ID can show more fine lines (do not know how it does, maybe anti aliasing?).

  I can remedy that and export it in the form of raster image, but then, it removes any interactivity.

  I just want to keep the items in the vector reduced to their actual thickness, does anyone know how to do this?

  I've attached a picture that she shows off quite well.

  http://DL.dropbox.com/u/25033198/Untitled-1.jpg

  Ah, Yes, of course for this. I forgot to treat the "fix" you found.

  It is a 'fix' rather than a real problem, because if you zoom in on this image, you'll see that it contains no pixel 1/4 more! The image renders too thin lines identical to InDesign: as light gray.

  There is progress and disadvances to save the image as a bitmap, rather than as a vector; I think that you are aware of both, and it is up to you to decide which method to use.

  If you are sure that your users (consider that they will look at what on paper) will not zoom in, you could still use the lines of 1 point but their light gray color, so the Visual effect is the same 100%. And it will look only slightly weird when your users zoom in - they will get * thick gray * lines, instead of * thin black * those, but it's still better than ugly pixels.

• Integrate several sovereign wealth funds in the same page using SWFObject

  method. I tried this and it doesn't seem to work. In the example below, the film on the right (the boy in the hat) is incorporated by using this procedure

  but the two on the left (legs moving on button animation and dog order) should be installed using the installation of Dreamweaver swf methodology. and therefore the dog animation does not appear in Explorer 8 and some other browsers.

  Can anyone help?

  http://www.coolgelncap.NET/

  Thank you very much

  Elizabeth

  Several div you created to contain the swf file? Then, you will need to use the SWFObject code several times not just once... you have to tie the var so... code in each div and so.write () should be referred to correct divlayer.

• Preloader base for several sovereign wealth funds?

  I watched 100 + discussions on the web, not one right answer.

  I want an AS3 equivalent script for the following script (that I made):

  loadallthefollowingswfs.intocache ("home.swf", "products.swf", "contact.swf");

  I want a bunch of different SWFs, which are all in the same directory, be loaded into the cache before the display of the FSV.

  I want to put this text in the first image of an index.swf

  When it loads ALL SWFs in the cache, it will move on to frame 2 of the index.swf and keep moving.

  All other discussions about the State of the web is "have each loading of swf when it is open" (I won't want them all preload them in the cache before display anyone of sovereign wealth funds), or the so-called discussions "you should all FLAS combine in a single fla and preload just a swf file (I don't want to be I want to separate fla/swf files).»

  Anyone have any suggestions on how to load several SWF files into the cache when you access an image from a swf?

  Thank you.

  This should be the number instead of uint.

  and there should not be spaces in getNextHighestDepth()

• sovereign wealth funds are not loading the server

  Hi guys!

  I have a problem. We have a website www.onlinerealgames.com which hosts the game developed by our company. Recently, we wanted to change the template. We test the new model in a subdomain of ours which is www.onlinerealgames.in.

  All right, except that the SWFs on the server are not loading. Instead, they show not responsible film. If I can directly access the swf file with the URL indicating the download option window.

  We have a separate database for both sites. Both have same sovereign wealth funds. If we change the source of .in in .com then sovereign wealth funds are to load properly (in the src of the embed tag property)

  Can someone help in this issue!

  Thanks in advance.

  your .in server may need to be updated to support swf mime types.

  https://developer.Mozilla.org/en/Properly_Configuring_Server_MIME_Types

• How to access the methods of the / in the parent and child responsible sovereign wealth funds?

  Hello world

  Imagine the following configuration. The main SWF load a child swf file.

  In AS2, I would use just _parent or _root to call the desired function. How can be done in AS3?

  Is it still possible? Can I call a function on the main swf that loaded? What happened the other way around, this time of principal to the loaded swf format?

  Thanks for the support!

  See you soon

  :::-)

  In AS3, you can call the _parent (AS2) using MovieClip (parent) (AS3) and similar to the _root.  If you load a child swf, you must understand that the child normally lives in the charger you loaded with, so to return to the loaded swf file you have to go (parent.parent) MovieClip.

  So much to talk to the child going to swf, go through the following discussion...  http://forums.Adobe.com/thread/720211?TSTART=0

• How a pdf manages several sovereign wealth funds during execution?

  If a pdf document contains several sovereign wealth funds, which get turned on and off several times, made each a series in its own instance of Flash Player?

  If not, can they run separately without problem?

  Can we SWF work for awhile and then another SWF run, followed by a return to the first SWF back to halfway through or it starts it Framework 1 again?

  By enabling a Rich Media Annotation, it forms a new instance of sandbox for the execution of the public Service, so you can have several active RMA simultaneously without too much trouble (except things like steal the focus from the other). They see each and other libraries and you can not share data directly with each other as the LSO is deactivated, but base-as a string data can be sent through tunnel via AcroJS If you know what you're doing.

  When an RMA number off, everything is cleared - Acrobat / Reader not automatically store any "data resume" but you can create a traditional recovery system by encoding the SWF to export/import status information for the PDF file. You need to ensure everything needed to "take back" is placed in the State of string data, then read and analyze whenever the SWF loads. Again, this data packet is not visible to other content.

• Sovereign wealth funds in tilelist slow?

  I have a tileList component that I'm loading SWF in. One of my sovereign wealth funds has a particle system in it, and every time it is loaded in the tilelist component of the particle system slows down. Whenever the sovereign funds are loaded, I use tileList.removeAll () to clear, then tileList.addItem () to repopulate the tileList. My guess is that this is not actually unload SWFs completely so that they are piling up in memory. What should I do to unload SWFs completely to prevent any slowing down?

  You must use the DataProvider of TileList property to method removeAll() access as: myTileList.dataProvider.removeAll (), refer to this document http://www.adobe.com/devnet/flash/quickstart/tilelist_component_as3/

• Control of sovereign wealth funds with lengths of Dynamics

  I need to load SWF applications in my Director files. Currently I use the timeline with an arbitrary amount of time. My problem is that the length (duration) of these sovereign wealth funds depend on interactivity for the end user. If they press each key, answer questions, etc... a viewer could be done in 5 minutes and another user could be done in 30 minutes. I have no way of determining. Currently, my calendar will run out and I send users to a Menu screen. Is it possible to dynamically load a SWF file and play indefinitely? I have a button on the screen if the use wants to stop prematurely.
  
  Thanks in advance for help with this problem!
  | rossimo |
  

  Hi rossimo:
  Maybe it's completely stupid to suggest, but what happens if you add a command "go to the section", wouldn't that keep the playback head and still allow your SWF is running correctly?

  Rafael.

• Animation stops in sovereign wealth funds Long

  I have a few presentations I am creating using a single Projector/EXE, including the two sounds and animation. They are quite long in terms of how many images, they (current is 16 K images +) and the problem I'm running into is that the animation keeps freezing at the end of the presentation. Audio continues to play, but the animation freezes.
  
  I have tried everything I can think of, but do not find one solution other than to divide the project in several sovereign wealth funds and their loading (loadMovie) external. Ideally, I would like to be just a single file, but it's the only way I can find to make it work.
  
  Is there a problem with Flash only plays not passed a number of executives?
  
  Anyone else run into this? Any help/suggestions would be greatly appreciated!
  
  Thank you
  Mike

  OK, I answered my own question...

  It seems that Flash has just one problem with a LONG timeline... I guess that another reason why to use clips of film has its advantages!

  Mike

• When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I'm running on Windows using Intel (R) Graphics 4600 8.1

  When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?

  Hi Tanuj,

  Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.

  Concerning

  Gordon

  Gordon Gentles

  [email protected]

• Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Flash CC on W7. Important the fl.controls like 'import fl.controls.Button;  I get the compile error 1172. Solution?

  Can you indicate the corresponding code and the full error message?  Before the race going in your publication of Flash settings and select the option to enable debugging - it can help by adding information in the error message.

• I need to run python script on sovereign wealth funds all expenses?

  If I'm old swf loading in my main swf, I do run the python script on each of them to Scout for give me data, or can I just compile the main swf with telemetry on?

  This has proved not to be correct.  When I ran the script on some of the SWFs that are loaded into our main swf, I got much more detailed information when I have not run the script.

• Target the main.swf and frame30 of charge

  Hello everyone,
  
  I recently built a new Web site and uses two different swf files. The main.swf in the main SWF is aligned on the toprightcorner of the Web page, and the other buttons.swf swf is at the bottom of the Web page. What I need now is the buttons.swf whenever a button is hit, the main.swf should play a particular frame. So when I press the button 1, frame 30 of main.swf should start playing.
  
  Is this possible? Or is it possible instead of using buttons.swf, I just add different gif images and somehow have these images identify the framework within the main.swf?
  
  I searched for a whole day and I can't seem to find anything. I'm quite new to Flash when it comes to adding features or a script.
  
  I hope someone can help me!
  
  Kind regards
  James

  James,

  > Thanks for the tip!

  Sure thing. :)

  > I downloaded a sample of the Adobe support site file to which
  > shows how to send the text from a swf file to another.

  Very well.

  > The only different thing is I want a swf file to another to say
  > go to section 10.
  >
  > I did experiences, but to be honest I have no idea what it
  > every word means in the code.

  Fair enough. It's hard, I admit, when you are just getting started.

  > I hope that's not rude, if I ask a sample of work.

  Rude not at all. :)

  > I do not plan to go further in programming with flash,.
  > That's all I need

  Heh, you sure about that? You're never going to use the MovieClip class
  to load various video clips how to behave? You're never going to use
  the Button class to assign functions to button events? ;)

  > so, if someone won't find it too much trouble help me with this
  > one thing I would really appreciate it.

  What file did you download? I'm looking at the LocalConnection class
  entry now and it is an example of source code which passes text, as
  describe you. The thing is, you can write that
  "receiving_mc.methodToExecute ()" function to do what you want. In the
  example, that I look at you, it does only one thing:

  result_txt. Text = param1 + param2;

  ... namely, to define a particular text field TextField.text property
  (here, result_txt) a combination of two passed parameters.

  In your case, you could use the same code, just drop the part the
  creates an instance of TextField...

  cut this
  This.createTextField("hello_txt",0,10,10,100,20) ("result_txt", 1, 10, 10, 100, 22);
  result_txt. Border = true;

  ... and change the methodToExecute() that this is why...

  receiving_lc.methodToExecute = {function (param1,:Number)}
  gotoAndPlay (param1);
  };

  ... then change the last line of the other code of sovereign wealth funds that it is for this
  ...

  sending_lc. Send ("lc_name", "methodToExecute", 10);

  ... which means that you are still sending a message on the line "lc_name", so
  take the floor; you always call the function of "methodToExecute"; but now.
  you want to send only a single parameter, and this time it is 10. Once again, on the
  end of reception, the function methodToExecute() (which could be called
  No matter what, but in this example, they used a self-descriptive name) is simply
  the function call native gotoAndPlay() instead to define a text field
  text. And passing this value 10 via the param1 parameter. Does
  that clarify a little?

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• ETA App should help to get the time and date feature HELP!

  Hi everyone, I'm doing an application where I need to get the time and date of the antone device can help, I know there is a function such as getDate or getTime but im not to know how to use it.

  As far as I know,

  I use this to get the time system (it returns long type)

  System.currentTimeMillis();
  

  After that, you can use SimpleDateFormat to convert date and time

  SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy, HH:mm");
  String time = sdf.format(new Date(System.currentTimeMilis()));