Integrate with some OOTB application discussion forums

Similar Questions

• 3rd party Software to integrate with the current application

  Hi all
  
  Could you please me (simple steps-;)) how to use 3rd party software to integrate with current (ATG) application.)
  
  Example: cybersource (validate the address and the credit card), for this what are the steps we must follow and we need create components to configure the software.
  
  I'd appreciate if you share the resolution, it will be useful to others too.
  
  Kind regards
  Jyothi.MJ

  I think it would be a good start

  http://www.Scribd.com/ron_gelinas/d/64173966/41-integrating-CyberSource-with-ATG-Commerce

  Thank you

• Hi, I wanted to know if I can integrate a discussion forum in my site from muse. Is there a widget I can buy to do this? Thank you!

  Hi, I wanted to know if I can integrate a discussion forum in my site from muse. Is there a widget I can buy to do this? Thank you!

  Hi Nicolas,.

  If you are hosting the site on BusinessCatalyst then you integrate the forum module in your site muse, as the way that articles are integrated. I do not have a video tutorial on the integration of forums in Muse, but the process set out in the one below, that is for blogs, would be very similar to integrate the forums as well.

  Muse Jam Sessions_50_EmbeddingBlogs

  - Abhishek Maurya

• Hundreds of "Microsoft ISATAP Adapter" s in interfaces, slow down some networking applications

  Hello

  Recently, I noticed that some Java applications on my computer take a long time to start: at startup, the grip of the application within about 20 seconds, while the Task Manager indicates that the "javaw.exe" process takes 25% CPU usage (I'm on a quad-core processor, then that would mean that the process of one of them is fully) at the end of the duration of block applications finally starts and then normally works (and the CPU usage decreases). However, this long startup time is annoying when development/debugging Java applications.

  Make debugging, I could see that what was slowing down applications is a method of the Java API called 'getNetworkInterfaces' that retrieves the list of available network interfaces. Running a test program showed me that this method has found more than 1,000 network interfaces (!) on my system, which most is labeled "Microsoft ISATAP Adapter". Apparently, this method is called at the beginning of these Java applications, for reasons that I have not always figured out.

  Did some other research, I found that this method calls a Windows API 'GetIfTable"( MSDN documentation ) function: runs the C++ test program still shows the same number of interfaces (~ 1 000), with all the"Microsoft ISATAP adapter' s. as a result, the problem is probably not due to lack of Java; It's just more noticeable on Java applications, because Java must create a NetworkInterface object for each of these interfaces.

  Still more research to show that it is a known problem in Windows 7 and Windows Server 2008. The question now is: how to remove these "Microsoft ISATAP cards?" They do not appear in the devices, or using DevCon Manager as suggested on other forums. So far, I have not found a satisfactory answer.

  Here are a few links relating to the issue, this could enlighten us:

  This seems to be the issue as described in the base, Microsoft technical support, but he mentions "6to4 adapter" not "maps ISATAP.

  This user in the forums TechNet has the same problem (multiple interfaces, network do not appear in Device Manager, can't get them off with DevCon) but the wire provided no real answers. It would also be interesting to know where getIfTable retrieves network information: apparently is not in the registry.

  Finally, the most interesting link is one that also describes the issue (if it is on Windows Server) and mentions the effect on Java programs. He described a solution mentioning a tool "NDISCLEANUP" but I can't find it anywhere. Where can I get this tool?

  Hello

  Thanks for the reply.

  According to the description I would recommend that you post the question on the Windows 7 IT Pro forums for assistance.

  Windows 7 IT Pro Forums

• I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications.

  Hello

  I have a lot of problem with the installation of some software in Windows 7. I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications. Anyone have an idea what is wrong? Thank you very much.

  Original title: installation problem

  Hello

  Please keep us updated on the status of the issue.

  I suggest you try the following steps and check if it helps.

  a. you restart, and then press F8 after the bios screen comes up to bring up the windows boot options menu.

  b. Select "safe mode with command prompt" and press ENTER.

  (c) in the command prompt, type del c:\windows\system32\msiexec.exe and press ENTER.

  d. restart the computer and make sure that the Windows Installer service is set to automatic and started.

  e. try to install the Microsoft security essentials again.

  See also:
  I can't install Microsoft Security Essentials
  http://Windows.Microsoft.com/en-us/Windows/i-cant-install-Microsoft-Security-Essentials

  If you have any question, please ask your question on the forum virus and malware.

  Forums of viruses and malware
  http://answers.Microsoft.com/en-us/protect/Forum/MSE?tab=threads

  Because AUTOCAD, please ask question about Autodesk community.

  Autodesk community
  http://www.Autodesk.com/community

  I hope this helps.

  Thank you

• FDS Test Drive - help with examples of applications

  I try to use the FDS 30 minute TestDrive sample applications inside
  Flex Builder. I downloaded the test drive and all the samples of work
  fine just dandy, and I can view source etc. Then I wanted to load
  some of the apps sample in Flex Builder so that I could edit and
  play with them with the debugger to learn more.
  
  I tried the following:
  create the new project - use Flex Data Services/compilation app locally
  Root folder: C:\fds-tomcat\webapps\ROOT
  Root URL: http://localhost:8600 / ROOT. When I cliquerai to finish, I get the
  After 3 errors in the output panel:
  
  Unable to load SWC fds.swc: multiple points
  Unable to load SWC fds.swc: multiple points
  The definition of local base class was not found.
  Could not resolve < mx:Application > for implementation of component
  
  I'm on Flex 2.0.143459.
  
  I checked that fds.swc is indeed in the
  C:\fds-tomcat\webapps\ROOT\WEB-INF\flex\libs folder.
  I don't know what mean other messages or what to do.
  
  I then unzipped stubbornly examples of applications in the
  Project file FlexBuilder (I called FDS TestDrive samples) and
  tried to run anyway to see if I could get more information. I then get
  a browser with the following additional errors window:
  type of status report
  message /ROOT/FDS%20TestDrive%20Samples/Chat.html
  Description the requested resource (/ROOT/FDS%20TestDrive%
  20Samples/chat.html) is not available.
  
  So I guess that one of the problems is that it does not have an html document.
  But I don't know how to fix this.
  
  I don't know what to do. Any help would be GREATLY appreciated.
  

  Someone helped me offlist that once I'm frustrated that this forum is basically dead. But in case anyone else needs this info, I thought I would post. First of all, be on Flex version 2.0.155577. I have therefore had to redownload all of Flex, uninstall my old version, install the new version. Then I did the following
  to create the Flex Builder project for the dashboard sample application:

  File - > new-> Flex project
  Select Flex Data Services
  Select the application compiles locally
  Click next
  Uncheck the "default local Flex Data Services location"
  Click Browse... and open c:\fds-tomcat\webapps\ROOT
  Root URL: http://localhost:8600 /
  Context root: /.
  Click next
  Project name: ;
  Uncheck the "Use default location" checkbox
  Folder: c:\fds-tomcat\webapps\ROOT\dashboard
  Click next
  The main application file: dashboard.mxml
  Click on finish

  The context root is really essential. Also, to find my old Flex projects, I used file:import and then had to do a little more fiddling with some of the properties of the project.

  Too bad, this Forum is dead. I tried to get feedback to Adobe on this concern, but so far it has not helped. sigh

• language with some app problem

  Hello

  I have the problem with the language settings in some specific applications. The system works very well and reacts to the change of language. But these app idea and stay in English, even though I tried to delete all the languages and set only German... no change was still in English.

  My mother tongue is Czech. I use the latest version of the OS El Captain 10.11.4

  The applications involved are: Pages, iTunes, by plane (perhaps even more that I don't know)

  Airmanil app that I put Czech in general settings and no change... (Try also to affect German, no difference)

  Here, I have a few Pages screen. (green is red, correct language is not)

  I would be grateful for any suggestion.

  

  The computer has been restarted after selecting another language in system-> region and language preferences?

• Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

• Update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Windows 7 to stop working.

  Original title: Updates

  The last update update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Win7 stop working. This includes IE8, MS Office10 and a few others. Whats with THAT! I have updates blocked for now, until the writers get it sorted.

  Hello

  The article mentions that this update cannot be uninstalled. This software update is a prerequisite to install a service pack. In addition, this update improves reliability when you install or remove service packs and updates for Windows Server 2008 R2 and Windows 7.

  http://support.Microsoft.com/kb/976902

  Since you have problems with Internet Explorer 8 and Microsoft Office 2010 after installing the update, I suspect the involvement of a third party software conflict. I would like you to put your machine in aclean boot State in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart the computer as usual.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I use windows 8, but I booked with some programs such as samsung kies

  I use windows 8, but I am limited with some programs such as samsung kies

  Because Windows 8 has not been released yet not all programs will work with him.

  You may need to wait until they release a new version that is compatible with Windows 8.

  The OS of Windows Developer Preview General questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  Windows 8 Developer Preview

  From the download page:

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

• Adobe Contribute and Photoshop Elements 8 interrupt work with some automatic updates of Vista.

  With some Vista updates automatic Adobe Contribute and Photoshop 8 stop working until the moment where the programs must be uninstalled and reinstalled to operate again. After an automatic update, these two programs can be open to all, and an error message appears indicating that they must be reinstalled. Both programs are residing on a separate hard drive than the Vista operating system. This problem doesn't happen with every automatic update of Vista.

  Please repost your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum. Don't forget to include the numbers of KB updates at the source of the problem.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to create the new thread in a discussion forum, the browser closes and I'm back in the office.

  I tried to create a new thread in a Discussion forum.  Closing the browser window and I was back on the desktop.  I did a system restore, which not only does not solve the problem, but deleted my internet security software.  Has worked with people of tendency to reinstall the software, but I get a message tht says: «Unable to extract the installer...» ».  I have a class of the internet this week and I need this computer.  Can someone please?

  You can undo the last restoration of the system using: http://www.vistax64.com/tutorials/76256-system-restore-undo.html.  This may fix your problem with security software that has uninstalled when you did the system restore (using a date that probably existed before the installation of trend).  I don't know if it works now that you have done other things to try to reinstate the program, but it's worth a try.  I sincerely doubt that this process could help with the problem of browser (and there not so undo it reverses your efforts).

  You use Internet Explorer?  If so, please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the IE specialists will be more than happy to help you with your problem.

  If you are using another brand of browser, please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where experts in programs other than Vista or IE will be more than happy to help you with your problem.  You can also try to go to the web site of the Explorer and contacting their technical support staff (or post on a forum if they support a).

  Only trend can help you with installation problems you encounter through their program.  Perhaps it didn't uninstall completely during the restoration of the system.  Check if the trend has a removal tool and use it to uninstall the program, then try to re - install again.  If this does not work, you will need to work with their technical support to solve the problem.

  I hope this helps.

  Good luck. Lorien - a - MCSE/MCSA/network + / A +.

• Visual Studio 2010 on Windows 7 64 bit does not start with error 0xc000007b Application

  Charge installation of Visual Studio 2010 Professional on Windows 7 64 bit
  Picked up SP1 before you run the first time.

  Running fails with:
  ---------------------------
  devenv.exe - Application error
  ---------------------------
  The application was unable to start correctly (0xc000007b). Click OK to close the application.
  ---------------------------
  Ok
  ---------------------------

  The Dependency Walker tool lists the following messages:
  Error: at least a module has an import unresolved due to a missing in an implicitly dependent module export function.
  Error: Modules with different CPU types have been found.
  WARNING: at least a delay load dependency module was not found.
  WARNING: at least a module has an import unresolved due to an export feature missing in a dependent module of lazy loading.

  There are two 64-bit dll that is referenced:
  IESHIMS. DLL and MSVCR100. DLL

  I can copy MSVCR100. DLL from C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger\x86 in C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE (next to devenv.exe) and I get the splash screen.  However, before the same load completely blocks.  Added an IESHIMS to 32-bit. DLL of C:\Windows\winsxs does not solve the startup crash problem.

  Not quite sure what else to try, any advice would be great.

  Hello

  For assistance on this issue, you can ask your question here:

  Installation and configuration of visual Studio

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

• BlackBerry smartphones for info on Apple Discussion forums

  I've been on the discussion forums apple looking for a matter of ical/entourage. There are questions about BB there. I answered one and sent the link for Mac and BB (this section). Mainly on the synchronization of AddressBook and iCal problems.

  It's just something I thought I'd post, not sure you guys are going to do with him.

  Brooke

  

  Not really. I put the value sync with iCal and address book in Entourage. I would have more than 10 copies of the same item. So I stopped the sync and wanted to import iCal to Entourage. I discovered that Entourage is not giving me as many headaches as iCal and address book. I couldn't find a way to import iCal into a text file for the Entourage. I started just manually check all of 1943 (when the recurring events begin). I wish there was an easier way. I put them in my BB first then sync to the Entourage. This way I can compare them to see if they are a double, or more...

• There are a few problems with some of my tiles (Mail, games, music, etc.).

  Original title: Windows Mail (tile)

  Hello everyone.

  I had a few problems with some of my tiles (Mail, games, music, etc.) so I have WSReset.exe and since then I could not find one of these tiles. I searched the Store and tried to re - install, but it says that I must admit. I don't know what to do. Please help me...
  Thank you...

  Hi rap.

  Thanks for the reply with the status of the issue.

  Here in this scenario, you need to refresh your computer after the backup of your data. Refresh your PC reinstall Windows and keep your personal files and settings. It also keeps the applications provided with your PC and applications that you have installed in the Windows store.

  How to refresh, reset or restore your PC:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: refer to the section "refresh your PC without affecting your files.

  Warning: Apps that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  If you do not have installation media, you can see the following article from Microsoft Help to create installation media.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Note: The steps also apply to Windows 8.

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.