Integrating Active Directory and UCS Manager

Similar Questions

• OAM and MS integration Active Directory on non-Windows Server environment

  I begin by saying that I'm dealing with a heterogeneous environment here where several systems are managed by different management levels. Our Oracle systems chose to go all * nix (Solaris Oracle and Red Hat Linux) and so we do not have a single Windows Server in our Oracle services and would really like to keep it this way that we prefer to keep a uniform platform in all of our Oracle servers.  However, the side our Department Office has chosen to use Microsoft Active Directory, and now we want to integrate and perform authentication against it for our protected sites OAM.  We are in the initial phase of installation, but we didn't want to implement a critical server like OAM on the Windows platform and focus rather OAM running on a Red Hat Linux server to Active Directory.  We will also use OID as run us portal but do not want to use it as our authority for Oracle products authentication (local policy is that Active Directory is the authority of the credential is valid on the site as we head towards the true Single Sign On our desktop and web applications).  I have a few questions.
  
  1. it is possible using native or to run the version of Windows of OAM?
  2. If you must run OAM on Windows to use AD for authentication, is it possible to install the Windows of OAM version as kind of an interface for our main server of OAM running under Red Hat Linux to make the AD Auth?
  3. can it be done using some kind of interface such as Oracle Virtual Directory in interface with the interface LDAP to Active Directory MS?

  Hi David,

  Answers online

  1. it is possible using native or to run the version of Windows of OAM?
  You can run all servers in OAM on * nix and just point to AD as a source of data on the machine: port AD running on OAM. There is no need for the components of the OAM on Windows.

  2. If you must run OAM on Windows to use AD for authentication, is it possible to install the Windows of OAM version as kind of an interface for our main server of OAM running under Red Hat Linux to make the AD Auth
  As above, this is not necessary.

  3. can it be done using some kind of interface such as Oracle Virtual Directory in interface with the interface LDAP to Active Directory MS?
  Yes, it is quite possible. Even if it is not necessary in your situation, it provides more flexibility front the user store with OVD, for example when the addition/change of name of Windows domains, or by specifying some branches for users and so on.

  Kind regards
  Colin

• The ODI 11 g integration Active Directory

  
  Hello experts.

  ODI 11 g integration Active Directory requires any separate identity under license of Oralce management component to be part of the technological landscape, so that integration to be achieved - or he will communicate directly with Active directory.

  This will include security based on roles in ODI - or is it only the authentication user name?

  see you soon,

  John

  Hi John,.

  Please check the doc https://support.oracle.com/epmos/faces/DocumentDisplay?id=1510392.1&displayIndex=1

  The user should create natively studio and privileges also benefit from studio as well... just authentication of connection occur with Active Directory.

  I hope this helps!

  See you soon!

  SH! going

• Active Directory and domain controller on old customer Windows 2003 and Windows 7.

  Hi all

  I have Active Directory and the domain on old Windows 2003 and Windows 7 client controller. I enabled "User must change password at the next logon" for the customer user on AD account.

  When the user tried to connect to Windows 7, after that they have got the change password screen and type new password, then they received message "the user password must be changed before logging on the first time," user get password screen change again, then they get the same massage. Looks like he's going to loop and user cannot change password and connect to the computer.

  Hello

  To help you with your concerns, you can see the article below:

  Error message: the password must be changed before logging on the first time

  Let us know how it goes.

• Cisco Secure ACS groups 5.1 Active Directory and RSA Authentication Manager 7.1 for profiles

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}

  Hello

  I'm deploying an ACS connected to an RSA AuthManager (that is connected to an Active Directory domain)

  I create several groups within the Active Directory server, I try to give to users for their groups different access rights.

  I tried to define an access policy "NetOp/NetAdm" and two authorization rules:

  Rule-1 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETOP 'Auth for net operators' 0

  Rule 2 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETADM 'Auth net admin' 0

  Default: refuse

  In the identity, I have configured the RSA identity source, so that users get authenticated by the RSA Authentication Manager.

  But I still refuse to get access, RSA authentication is successful, but the group membership, active directory does not work, even with the unix attributes or group principal defined for the user.

  My question is this valid configuration scenario? Is there another way to define several profiles according to the Group of users of external source?

  The stages of monitoring:

  Measures

  Request for access received RADIUS 11001

  11017 RADIUS creates a new session

  Assess Service selection strategy

  15004 Matched rule

  Access to Selected 15012 - NetOp/NetAdm service policy

  Evaluate the politics of identity

  15004 Matched rule

  15013 selected identity Store - server RSA

  24500 Authenticating user on the server's RSA SecurID.

  24501 a session is established with the server's RSA SecurID.

  24506 check successful operation code

  24505 user authentication succeeded.

  24553 user record has been cached

  24502 with RSA SecurID Server session is closed

  Authentication 22037 spent

  22023 proceed to the recovery of the attribute

  24628 user cache not enabled in the configuration of the RADIUS identity token store.

  Identity sequence 22016 completed an iteration of the IDStores

  Evaluate the strategy of group mapping

  15006 set default mapping rule

  Authorization of emergency policy assessment

  15042 no rule has been balanced

  Evaluation of authorization policy

  15006 set default mapping rule

  15016 selected the authorization - DenyAccess profile

  15039 selected authorization profile is DenyAccess

  11003 returned RADIUS Access-Reject

  Thank you

  Christophe

  I think you need to do is to create a sequence of identity with RSA as a selection in

  Authentication and recovery research list of attributes and AD in the additional attribute list recovery research. Then select this sequence as a result of the politics of identity for the service

• Cisco VPN client v5 and integration Active Directory 2008

  Hi all

  I need to know if I can integrate Single Sign On for my Cisco VPN Client v.5 with my Active Directory which run on windows 2008

  THX in advance

  No, unfortunately, Single Sign On is only supported on Clientless SSL VPN (WebVPN), not on the IPSec VPN Client AnyConnect VPN Client.

• Provisioning of password in Active Directory and TCP ports

  Hello
  
  -I want available to users and their passwords in Active Directory
  -J' need to declare precisely what TCP ports that I use to have open in the FW:
  -TCP port if an IDM and the gateway (or server connector): 9278 (or 8759)
  -some ports between gateway and AD.
  
  Can someone tell me what ports I need between catwalk and IDM? I tried 389 and 636, but this is obviously not sufficient...
  
  Thank you.

  OK, let me tell you how it works then ;-)

  -I am speaking here of the AD adapter only, and not the connector (I'll dig this one later)
  -In the resource configuration page, you can choose the type of encryption: none, SSL, or Kerberos.

  -None:
  everything is done on the LDAP port (389) except password management which is done on port TCP 445 (Microsoft proprietary protocol)
  If 445 is blocked, no password provisioning is done and you will see the bridge trying to reach the ad on this port try ICMP (ping), then give up.

  -SSL:
  everything is done on LDAP 636. Everything.
  Why it does not work at first on my environment:
  -a been configured correctly AD? Yep: private key in the local computer AD certificate store, CA in the trusted CA on the local computer data store
  -have I forgotten to configure something on the side of the door? No, CA has been properly placed in the trusted CA on the local computer store
  -the fact that I made typo somewhere? Nope.
  -What I forgot, it is to restart the gateway service after having put the certificate in the trusted CA data store. And given that the computer does not restart for more than a month, the gateway service was not properly SSL-protocol of communication with AD...

  -Kerberos:
  I do not tried this mode. (I wanted the standard LDAP bind for some reason)

  now I can start growing hair again...

• Three companies using Windows Server 2008 Active Directory and physical locations?

  The research of three companies using Active Directory in Windows Server 2008 and also how many physical locations?

  Answers forum is addressing issues technical home user.

  If you don't have a technical question, you can try to use Bing to search for the information you are looking for.

  If you are having problems with Active Directory, you can create a new post on the TechNet forums for assistance.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Problem with Active Directory and the NAC

  Hello.

  Please I need help.

  I have my server with the "Active Directory SSO" began, but when a user tries to connect to the network with its credentials in Active Directory, the PC agent say that 'Invalid username and password.

  My server is tuned by the 8910 port.

  I conectivity with CBS and active directory.

  kpass command runs successfully.

  Thks.

  Jorge,

  If the service is running, then you must put emphasis on the communication client/AD and see where the break occurs.

  Can you ensure that the unauthenticated role, you have all the required TCP/UDP ports open, and ICMP and IP FRAGMENTS to all your domain controllers?

  HTH,

  Faisal

  --

  If you find this article useful, please note so that others can easily find the answer

• Active Directory and the Source of data in Application Weblogic

  Hello

  I was asked to find a way to record information of users created via Active Directory in my datasource request so my application can control if the user as authorization.

  My application, services to extract the data and the data source will be in the weblogic.

  What I found so far that there was to be a supplier Active Directory in the weblogic for authentication, and it will work similar to the SQL provider, put all the users and groups in the weblogic.

  Basically which, according to me, I have to do is create something (service or DB package function perhaps) that will allow to establish synchronization between the two AD and my database somehow.

  How I can do it, or there is an easier way to do it?

  Thank you

  Hello

  Yes, that is what I suggested in my initial post. In some scenarios, I also use JAVA API for details of user AD and works pretty well.

  Thank you

  Amey

• Active Directory and SSH on ESX 4

  Has anyone tried to use active directory to authenticate users on an ESX 4 box? Is this possible? I know that most linux operating systems offer a way to integrate into Active directory using some extensions and the ldap service. ESX 4 has this feature?

  Take a look at cesite for instructions for setting up the AD, he wrote for ESX 3.x, but should also ask 4.0 and give you a good starting point.

  http://www.astroarch.com/wiki/index.php/Full_Integration_of_Active_Directory

  about using esxcfg-auth to set on ESX. I recently configured our host ESX 4 auth against Kerberos using my instructions 3.x and it works very well. Don't see why AD won't be the same, good luck

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Configure Active Directory and form WLS and human task

  Hi guys,.
  
  We use SOA Suite 11.1.6 for the current project and want to configure Active Directory as an identity provider. I know this is not a new issue and has made several researches on the forum and online, but do not meet all of our questions. Currently, in the field of security WL, we see users and groups in the AD. But there are questions still pending:
  
  1 authentication with users of the AD
  We can not yet to configure user connection WLS AD.
  
  2. e-mail users
  The AD user does not appear in the search for email in jdeveloper. Currently, there are only two users returned: weblogic and oraclesystemuser. I think they're the default users.
  
  3 WorkList Application (human task)
  It is similar to the #1, but not all. We like to configure AD users to log on to the application of the task list.
  
  Any suggestions are appreciated.
  
  Thank you
  Steven
  
  Published by: sw12345 on April 27, 2012 11:49

  Hi Steven
  1. what you want is possible, BUT you can have your users only in a security provider. To access/bpm workspace, all users will be designated in the first highest security provider of the page. So make sure, your AD authenticator is the highest and also all of these providers must be defined on ENOUGH / OPTIONAL.

  Below, these 2 positions should give more details:
  WebLogic administrator account is inactive after activating the authenticator DB
  Re: Workspace 11g BPM don't Show no user of OVD - highest authentication provider page

  Thank you
  Ravi Jegga

• ActiveSync with Active Directory and the custom search filter returns nothing

  Hello
  
  I use ActiveSync to update the Active Directory user accounts in the IDM repository.
  
  The search is based on the uSNChanged attribute to find the last modified accounts.
  
  I'm trying to set a search filter in my resource Active Directory synchronization strategy that is combined with the default
  
  I expect to see this filter on the balls
  (& (objectClass = user) (objectCategory = person) (myCustomAttribute = value) (uSNChanged > = 8003748))
  
  But Active Directory receive it:
  (& (objectClass = user) (objectCategory = person) (FALSE) (uSNChanged > = 8003748))
  
  If the query never returns from the objects.
  
  Can someone help me solve this problem?
  
  Thanks in advance
  
  Edited by: user1657029 Apr 23. 2013 15:52

  Problem solved. My custom attribute was not on the global catalog in Active Directory

• Question related to Active Directory and ECM

  ECM(11g) is integrated with AD and for each action of the user, the application is hititng LDAP and trying, search for the user, get user accounts and user roles. It takes about 2 to 4 seconds depending on the number of groups that the user a. is there a configuration setting that tells how long to cache information from the user and do not hit LDAP for each operation?
  The consequences of such a
  
  Published by: Bunty on December 11, 2012 11:10

  Hello

  Try these settings:

  DoCacheNonexistentUsers = true
  DoNotQueryLdapForEmail = true
  UserCacheTimeout = 3600000

  These settings will ensure that the details of the user are stored in the cache of the Complutense University of MADRID for 1 hour and within this time if the user needs to re-login, then he won't have to query LDAP for this operation.

  You can see more details of portal of MoS and the present articles: Doc ID 1392659.1 , Doc ID 741118.1

  This is used to improve the performance of the Complutense University of MADRID.

  I hope this helps.

  Thank you
  Srinath

• Installation of Active Directory and the reconciliation

  Hello world
  
  I want to install Active Directory as target resource.
  I've implemented server connector according to \activedirectory-11.1.1.5.0\documentation\oim\ActiveDirectory_guide.pdf
  I put the key.
  
  Once all operations of installation, I tried to recon research group.
  But an error occurred:
  
  oracle.iam.connectors.icfcommon.exceptions.IntegrationException: connector ConnectorKey (connectorName bundleName = ActiveDirectory.Connector bundleVersion = 1.1.0.6380 = Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector) not found.
  
  
  Thank you.
  Best regards.

  Is the connector server is running, you copied in pots on the connector as suggested in the document server