Integration of the ATG-short 11.1 - error with base

Similar Questions

• Short WAT Kapov - error with the client for a Web site certificate

  Hello

  I'm new to the WAT of short component and I try something.

  Whenever I enter any website URL, it throws this error indicated in the screenshot.

  I read WAT usage guide that says to add the SSL Web site certificate in the folder ' certificates/server '.  I still get the same error.

  Any help would be appreciated.

  Thank you

  

  If you need a proxy server and you have not defined a, try to set a proxy server.

• The event viewer displays continuously errors with ID 7000 and 7009

  I use Acronis Disk Monitor, which shows the disk health 82% due to a bad block on disk. Observer events poster continually errors on ID 7000 and 7009, but I can't find a solution to these errors or what they mean exactly.

  11/14/2010 08:31 am, Catkin333 wrote:

  I use Acronis Disk Monitor, which shows 82% because of the bad health disk
  block on the disk. Event Viewer displays continuously errors on ID 7000 and
  7009, but I can't find a solution to these errors or that they
  mean exactly.

  If Acronis reports bad blocks on the disk, then you should replace the disk as soon as possible.  Blocks of bad sectors/bad is not repairable, and once they begin to appear that they tend to behave like a snowball rolling downhill, you will get several of them with increasing speed.  You may lose your data if you keep using this drive.

  Regarding the events 7009 & 7000, you will need to copy & paste the events here for give us to you more information.  Double-click on the event to see its properties, and then click the icon of the Clipboard (which looks like 2 pages of paper) to copy the event, you can then paste it in your next post.  These Service Controller errors may be caused by a multitude of different things.

  John

• Integration of the Probs in Jdev 11 g with Struts. Help, please

  Hi all
  
  I'm doing a trial using 10.3 Struts application in Jdev 11 g.
  I created the web application wizard Jdev using but don't select Struts as technology. Then, I downloaded the Jar of Struts files and them copied in the directory WEB - INF lib in my sample application.
  But when I am trying to importorg.apache.struts.action.ActionForm and expand ActionForm in my Bean I get below error:
  
  
  Error (2.32): package org.apache.struts.action does not exist
  Error (3.36): cannot find symbol
  
  
  My Bean is simple as below:
  package projectname.nano.common;
  org.apache.struts.action.ActionForm import;
  SerializableAttribute public class InputFormBean extends ActionForm
  {
  
  }
  
  Then I thought that this compiler may not be able to integrate the copied jars. I went to Applications-> the Defalut project properties and include the my app lib directory.
  Probs still persists. Please help as I m stuck here.

  Check out this thread where I described how to setup a struts application in 11g
  Re: Error when deploying JDeveloper 11.1.1.3.0 on WebLogic 10.3
  Timo

• I get the same messages code and error with Windows Mail for a week that the person in the previous announcement.

  It seemed to have started running last week when we had a huge update of Windows.  Windows Mail does not connect to the top through our wireless network.  He tries to go through several dial-up non-existent.  It is not a problem with my server.  I checked with them.  I tried to pass even if Windows Mail, with tools, through accounts, properties.  Once I get in the window with about 8 tabs on it, I can't get into any tab, except that might do me some good.  When I click on the Connections tab, my computer hangs in Windows Mail, and I leave Windows Mail.  Is there another way to get into Windows Mail to set the connection to Windows Mail?  Is there a way to get my computer to get the network wireless set up as the connection by default because the way he is now, he won't put the connection wireless as the default connection, even if I'm signed up to this time.  It's a problem that has arisen recently and it is extremely annoying.

  Try to compact and repair the database first (see www.oehelp.com/WMUtil/) to rule out the possibility that it is a question of database.

  Then go to tools | Options | Connection and see if you can set the correct connection there.  Then go to tools | Accounts | Add | Post and add another copy of your e-mail account with the correct settings.  Before you download messages, go to tools | Accounts | Mail | The original properties and uncheck the include account when sending and receiving.  Then check mail on the new account you set up and see if it works.  If so, you can delete the old account.

  If it is still a question, then see point 3 here: www.oehelp.com/OETips.aspx#3 to exclude interference antivirus and see point 15 on this page for updates which could have done (nothing to do with your problem).

  Steve

• ATG-short integration - change the query of the user's search term before being sent to short

  All testing the ATG-short front-end search/browse integration in a commerce application of my organization, one of our QA team members noticed as a search term consisting of just a vertical pipe character ("" | "") would cause the full product catalog to return in the results of research, as if every product in the catalogue was a match to that search term.

  This behavior can be seen in the Application of reference short JSP as well, so that this behavior does not appear to be caused by something that makes our custom application code.

  It is an undesirable behavior for our application - the company prefers that we do not show the entire catalog of products at the same time unless he is cut down somehow (whether via a word search or by the application of filters of properties).

  I plan to implement a solution to wash just ' | ' characters of the search term entry.  It would be pretty easy to do on the client side, but as with any other web application input validation, we really want to do this on the side server.

  I think that this should be done by the substitution of / expand part of the OOTB ATG pipeline where it sends the search request to short for treatment.  However, this is not something I've done before.  I read in Chapter 7 of the ATGEndecaIntegrationGuide.pdf ("application integration"), but it's not immediately obvious to me how/where I'd be better on the substitution of / extend an OOTB ATG component for making filter ' | ' characters in the search query term.

  All the world is this kind of thing before?  If so, could you please describe how you went to?

  Thank you!

  -Jon

  I ended up implementing this as follows:

  -Create a new class that extends the class InvokeAssembler;

  -Implement a custom InvokeAssembler.properties file that points to my new class derived;

  -In service () of the new derived class method, use methods of the DynamoHttpServletRequest to filter pipe characters in the value of the Ntt parameter and the query string.  Then call super.service () to handle the demand.

  -Jon

• Cannot install McAfee on Windows XP. Errors with "Event Viewer".

  Hello, I am writing on behalf of a client.

  The customer has been in touch with the people of McAfee support for four days and they are still not able to install the antivirus program due to errors with Event Viewer. The people of McAfee asked the customer to reach the MS Support since then, as they say is a Windows problem.

  The event viewer contains errors in the Service Control Manager,

  DCOM, NetDDE.

  That's my problem, put support in for me.  Some fo include errors in the event viewer:

  DCOM got error "the service did not to start or control request in a timely fashion." try to start WSearch service with arguments "" to start the server:

  {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

  Details Product: Windows operating system ID: 7000 Source: Service Control Manager Version: 5.2 Symbolic name: EVENT_SERVICE_START_FAILED Message: The %1 service failed to start due to the following error: %2     Explanation (SCM, Service Control Manager) could not start the service specified, probably because the service is not configured correctly.     User action Do one or all of the following conditions: Check the error information displayed in the message. Check that the service password has not expired. Verify that the service is in the right place. Check that the service is not infected with a virus. To view the WIN32_EXIT_CODE as SCM error when you try to start the program, at the command prompt, type application of SC name of the service The displayed information can help you troubleshoot the possible causes of the error. If the WIN32_EXIT_CODE is zero, SCM did not attempt to start the service because the error was detected first.         Version: 5.0 Symbolic name: EVENT_SERVICE_START_FAILED Message: The %1 service failed to start due to the following error: 2%.     Explanation (SCM, Service Control Manager) could not start the service specified, probably because the service is not configured correctly.     User action Do one or all of the following conditions:

  • Check the error information displayed in the message.
  • Check that the service password has not expired.
  • Verify that the service is in the right place.
  • Check that the service is not infected with a virus.
  • To view the WIN32_EXIT_CODE as SCM error when you try to start the program, at the command prompt, type
  
  application of SC name of the service
  The displayed information can help you troubleshoot the possible causes of the error.

  If the WIN32_EXIT_CODE is zero, SCM did not attempt to start the service because the error was detected first.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  ++++++++++++++++++

  Details Product: Windows operating system ID: 206 Source: NetDDE Version: 5.0 Component: System event log Message: Listen failed: %1     Explanation The computer expected data from another computer, but not the not received. The other computer does not send, or the thread on this computer that listens to the data has encountered an error.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

• How to use the Precendence_rules.csv file to define the rules of priority in integration ATG-short

  Hello

  I'm integrating ATG 10.1.2 Catalogue of products with short. I am successfully able to publish data from ATG to store short CASE file and run the update of the base.

  I used the model of integration of catalog:

  http://docs.Oracle.com/CD/E35827_01/ToolsAndFrameworks.310/PDF/ProductCatalogDTGuide.PDF

  The problem I am facing is, I have a dimension created from the structure of the ATG catalogue. I also have dimensions that I created in developer studio.

  I want to apply priority rules on the dimension, which I created in dev studio. using the Sun. by coming to the dimval CASE record store. Because I'm not able to view the dimensions to the CASE record store I can't define the rules of priority in dev studio.

  Page no. 12 of the guide above, they suggested that I use this precedence_rules.csv file in < app >/config/api - entry directory. I tried all the possible permutations and combinations to add priority rules by using this file, but they still do not work (I checked in JSP REF). All other prules I created in the studio of dev (between dims created in dev.studio) are being created.

  Another doubt, I must settle prules on a Sun. Val a dimension named product.category (coming from the record store Sun). Is this format I used below correct (I used the Windows format of folklore as suggested in the guide)?

  Precedence.source_dimension_name, Precedence.source_dimval_spec, Precedence.target_dimension_name, Precedence.type

  response of Product.Category/Accessories, 102016, Accessories 1, sheet

  Ideas/pointers would be greatly appreciated.

  I have no way of knowing that my FCM/ConfigurationGeneratorForge is actuall read this file because it didn't we no log being generated.

  Thank you

  Arjun

  I think I understood the problem I had. FCM correctly reads the precedence_rules.csv file, but it supports the priority rules for the dimensions of the root level. I could create a prule for "product.category" (it is NOT a dimension of autogen) which is a dimension created by the components of indexing of the ATG.

  It supports mapping prules for dims created in dev.studio and those created from on the side of the ATG and vice versa.

  When I tried to add the "product.category/accessories" as the size of the CBC in the priority rule, it does not work. "Accessories" are a dimval under "product.category" and it doesn't have an entry in the record of the CASE of the application schema store. I guess that's the problem that prevents me to add prules to the dimval.

  If someone managed to create the rule of priority for a dimval, let me know.

  Any help would be greatly appreciated.

  Kind regards

  Arjun

• What are the answers of code of HD521-2W SMART short self-test error when running the diagnostics?

  1 HP Pavilion a4310f, product # AY014AA-ABA, software Build A1NAv6PrA1

  2. Microsoft Windows 7 Home Premium (64-bit) Edition

  3 a receipt the "Failed SMART short self-test HD521-2W" when executing Hardware Diagnostic tools.  Error message:

  Error message the device reported the following State: the previous self-test completed having the read element of the test failed. 01/12/2012-06:21:01

  The first LBA value failure Error Message is 440642933 and the failure occurred after that the device was working since 7943 hours under tension.

  01/12/2012-06:21:01

  4. I made no changes to my system for over a month.

  Device: Hard disk WDC WD64 00AAKS-65A7B SCSI Disk Device, the revision of the firmware 01.03B01

  This unit is my hard drive (it is in factory with partitions C: and D: {Factory Image})

  Hello

  The Smart error code would indicate that the hard disk is running out and must be replaced.  If you want a guide on this, let me know.

  Kind regards

  DP - K

• My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent.

  Title: Hardware failure

  My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent. What can I do?

  Hello

  1 have had any changes made on the computer before the show?

  2 are you facing any problem with the hardware?

  Method 1:

  I suggest to see the link and try to run the troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  See the article and check if that helps:

  Diagnostics of Dell hardware

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_362645&isLegacy=true

  If the problem is not resolved, contact the manufacturer for additional assistance:

  http://support.Dell.com/support/topics/global.aspx/support/hardware/hardware_portal?c=us&CS=19&l=en&s=DHS

• The ATG installation error

  Hi Experts

  I get an error during the installation of ATG. I downloaded 9.4 ATG and try to install. "When he goes to the part selection appserver, I chose jboss, it is giving error" invalid jboss home directory. I gave jboss home as - C:\jboss\jboss-eap-5.1\jboss-as. I downloaded jboss6.1 and 7 and also used these directories, it gives the same error. Please advice me what do.i also used ATG 10.2 and 11 of the ATG. I got hit in the same step.

  Yes, you must use JBoss installation zip and unzip it. Avoid using the JBoss with native installer. For ATG 9.4, JBoss directory would be something like C:\jboss-eap-4.3\jboss-as. Similarly for ATG 11 you will need to use the path to jboss - as under JBoss EAP 6.0.1. Also make sure that you are using compatible JDK and your JAVA_HOME is pointing to the correct path of JDK and it contains no spaces. For example, if you have JDK directories present in "Program Files" then use as: C:\Progra~1\Java\jdk1.6.0_45\bin\java. Hope I help.

• Assignment of the multiple single-eligible property error - short 3.1

  Hello. I got the error to follow by running a graph with components TextEnrichment and Add/replace files in bulk .

  Error [SocketReader] - received the server ERROR message: try to add/replace recording with several assignments of single-beneficiary of property "EntitiesPerson".

  ERROR [WatchDog_0] - graphic element [add/replace in bulk record: BULK_ADD_REPLACE_RECORDS] has no known cause.

  ERROR [WatchDog_0] - the error Details:

  org.jetel.exception.JetelRuntimeException: graphical element [add/replace in bulk record: BULK_ADD_REPLACE_RECORDS] failed with unknown cause.

  at org.jetel.graph.runtime.WatchDog.watch(WatchDog.java:474)

  at org.jetel.graph.runtime.WatchDog.executePhase(WatchDog.java:642)

  at org.jetel.graph.runtime.WatchDog.call(WatchDog.java:259)

  at org.jetel.graph.runtime.WatchDog.call(WatchDog.java:66)

  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:334)

  at java.util.concurrent.FutureTask.run(FutureTask.java:166)

  at java.lang.Thread.run(Thread.java:722)

  INFO [WatchDog_0] - the implementation of phase [0] completed with error - elapsed time (sec): 208

  ERROR [WatchDog_0] -! Completed with error - graphic stop run!

  What should I do to solve this error?

  MY CONFIGURATIONS:

  I've already run the LoadConfiguration.grf graph with these input files:

  AttributeMetadata.csv

  Key format, DisplayName, Type, profile,

  EntitiesPerson, EntitiesPerson, mdex:string, default Dimension

  AttributeProfiles.csv

  Profile, SelectType, RankingType, ShowRecordCounts, IsValueSearchable, IsRecordSearchable, SnippedSize, IsUnique, IsSingleAssign, isDimension

  Dimension, multi - or, the number of records, TRUE, TRUE, TRUE, 0, FALSE, FALSE, TRUE

  Follow the guide: short, for transform the component in LoadConfiguration.grf, I have this:

  #CTL2

  integer n = 1;

  Integer aggrKey = 0;

  Transformations record in the output folder.

  function entire transform() {}

  String pdrRecord = "< mdex:record >"

  pdrRecord = pdrRecord + '< mdex-property_Key >' + $0.Key + ' < / mdex-property_Key > ';

  pdrRecord = pdrRecord + '< mdex-property_DisplayName >' + $0.DisplayName + ' < / mdex-property_DisplayName > ';

  pdrRecord = pdrRecord + '< mdex-property_IsSingleAssign >' + $0.IsSingleAssign + ' < / mdex-property_IsSingleAssign > ';

  pdrRecord = pdrRecord + '< mdex-property_IsUnique >' + $0.IsUnique + ' < / mdex-property_IsUnique > ';

  pdrRecord = pdrRecord + '< mdex-property_IsTextSearchable >' + $0.IsTextSearchable + ' < / mdex-property_IsTextSearchable > ';

  pdrRecord = pdrRecord + '< mdex-property_IsPropertyValueSearchable >' + $0.IsValueSearchable + ' < / mdex-property_IsPropertyValueSearchable > ';

  pdrRecord = pdrRecord + '< mdex property_Type >' + $0.Type + ' < / mdex-property_Type > ';

  pdrRecord = pdrRecord + '< system-navigation_Select >' + $0.SelectType + ' < / system-navigation_Select > ';

  pdrRecord = pdrRecord + '< system-navigation_ShowRecordCounts >' + $0.ShowRecordCounts + ' < / system-navigation_ShowRecordCounts > ';

  pdrRecord = pdrRecord + '< system-navigation_Sorting >' + $0.SortOrder + ' < / system-navigation_Sorting >;

  $0.xml = pdrRecord + ' < / mdex:record > ';

  $0.key = aggrKey;

  n ++ ;

  If (n % 20 == 0) {}

  aggrKey ++;

  }

  Back to ALL;

  }

  So I think that it is not enough to solve the problem, or there is something that I have configured the wrong LoadConfiguration graphic.

  It works!

  LoadConfiguration.grf was wrong, then the attribute was always the property of IsSingleAssign TRUE.

  Thank you!

• The settings for the integration of the test error.

  To test the integration settings:
  
  1 in the Web client, select activities > maps.
  
  2 click Add.
  
  
  3 click Browse for the target value list of the target accounts.
  
  
  When I test the integration settings, I get this error.
  
  
  Error: ActiveX component can't create object: 'fdmFM11xG5B.clsFMAdapter '.
  
  Can someone help me please?

  Make sure you have registered the adapter properly. This error is usually caused by the dll adpater is not approved. If you have several application servers make sure that the adapter was recorded on all servers.

• Failed to retrieve the site definition for the ATG 11.1 site id

  Hello

  I'm trying to access a page /browse created under the site of siteStoreUs in the experience Manager. If I try to access the page of the application, observe the error with the blank page below.

  We work with ATG 11.1

  Please help me to solve this error.

  18:08:32, 401 SEVERE [atg.endeca.assembler.multisite.ExtendedSiteManager] (http-/0.0.0.0:8080-6) unable to retrieve the site for the site id of the site definition: /siteStoreUS: com.endeca.store.exceptions.

  PathNotFoundException: No node found at path: [pages].

  at com.endeca.store.configuration.InternalNode.getNode(InternalNode.java:153) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  at com.endeca.store.configuration.InternalNode.getNodeInfo(InternalNode.java:221) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  Thanks in advance,

  Ravinder Pogulakonda

  The resolution is here;

  Set storeFactory = / atg/short/assembler/cartridge/manager/DefaultFileStoreFactory in /atg/endeca/assembler/cartridge/manager/DefaultWorkbenchContentSource.properties

  Make sure of course below are configured correctly

  -Site of short Id to the element of site must correspond with the name of the site in the Manager(Ex: If the site name in XM is "homeSite", then Endeca site id in the site item should be "/homeSite") experience

  -Set configurationPath=C:/Endeca/ToolsAndFrameworks/11.1.0/server/workspace/state/repository/ /atg/endeca/assembler/cartridge/manager/DefaultFileStoreFactory.properties

  -Create the user segment in XM to /homeSite as site.homeSite.

  I hope this helps

  Thank you

  Ravinder

• ATG short index Admin

  Hello

  I have launched the base line of indexation and here is the snapshot of the components and their status. There is no record of data being sent to short, even if the data exists on the inside for the corresponding properties, sent through the exporting of schema.

  Component records passed a State failure Records

  Service category trees

  Exporting schema 59 0 COMPLETE (Succeeded)

  CategoryToDimensionOutputConfig 1 COMPLETE (Succeeded) 0

  RepositoryTypeDimensionExporter COMPLETE (Succeeded) 15 0

  ProductCatalogOutPutConfig COMPLETE (Succeeded) 0 0

  I ran catalog maintenance Service and the error log is as below. Guidance on what could be the problem?

  Debug Sat Jul 13 19:51:05 IST 2013 1373725265270/atg/commerce/search/ProductCatalogOutputConfig terminatePeriodicActivityUpdateThread(): PeriodicActivityUpdater thread does not, so do not stop.

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317 /atg/commerce/endeca/index/ProductCatalogSimpleIndexingAdmin---atg.repository.search.indexing.IndexingException: javax.xml.ws.soap.SOAPFaultException: fault occurred while processing.

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingPhase.doPhaseCleanup(IndexingPhase.java:395)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingPhase.performPhaseTasks(IndexingPhase.java:324)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingPhase.performPhaseTasksInParallel(IndexingPhase.java:248)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingJob.performJobInParallel(IndexingJob.java:297)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.SimpleIndexingAdmin.indexBaseline(SimpleIndexingAdmin.java:655)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.SimpleIndexingAdmin.indexBaseline(SimpleIndexingAdmin.java:637)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.SimpleIndexingAdmin$ 2.run(SimpleIndexingAdmin.java:1017)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to java.lang.Thread.run(Thread.java:662)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin caused by: javax.xml.ws.soap.SOAPFaultException: fault occurred while processing.

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:156)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to com.sun.proxy. $Proxy116.writeRecords (unknown Source)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to com.endeca.itl.recordstore.RecordStoreWriter.doFlush(RecordStoreWriter.java:207)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to com.endeca.itl.recordstore.RecordStoreWriter.flush(RecordStoreWriter.java:180)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to com.endeca.itl.recordstore.RecordStoreWriter.close(RecordStoreWriter.java:200)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.RecordStoreDocumentSubmitterSessionImpl.endSession(RecordStoreDocumentSubmitterSessionImpl.java:585)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.AbstractRecordStoreAggregateSession.commitPending(AbstractRecordStoreAggregateSession.java:489)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.AbstractRecordStoreAggregateSession.endSession(AbstractRecordStoreAggregateSession.java:427)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.RecordSubmitterImpl.endSession(RecordSubmitterImpl.java:231)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingPhase.doPhaseCleanup(IndexingPhase.java:376)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingPhase.performPhaseTasks(IndexingPhase.java:324)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingPhase.performPhaseTasksInParallel(IndexingPhase.java:248)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.IndexingJob.performJobInParallel(IndexingJob.java:297)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.SimpleIndexingAdmin.indexBaseline(SimpleIndexingAdmin.java:655)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.SimpleIndexingAdmin.indexBaseline(SimpleIndexingAdmin.java:637)

  Error Sat Jul 13 19:51:05 IST 2013 1373725265317/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin to atg.endeca.index.admin.SimpleIndexingAdmin$ 2.run(SimpleIndexingAdmin.java:1017)

  Thank you

  Avinash

  Jon,

  It was a problem with the deployment model that I used to create my application reference for short. It slipped when I used the deployment model provided with application of CRS in the ATG installation folder. I changed all references to the CRS by switching my name reference app customized for my project. In fact, I was using one that has been provided to Discover that gave me the SOAP exception. Ideally, it should work with any templater deployment. So using ATG provided model of deployment resolved the problem.

  Thank you

  Avinash