Integration of the signal from Y1 to Y2

Similar Questions

• When I plugged in my hdmi to pc I have followed the news but when I rehooked my moniter I lost the signal from my TV.

  moniter and hdmi problems

  When I plugged in my hdmi to pc I have followed the news but when I rehooked my moniter I lost the signal from my TV. I have a vizio hd tv.

  Hello

  ·         What operating system is installed on the computer?

  Method 1: Follow the steps and check if that helps:

  (a) first of all you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  (b) open the "display settings" in your computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  (c) pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Reference: http://windows.microsoft.com/en-US/windows7/TV-on-your-computer-Understanding-TV-signals-and-TV-tuners

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Method 2: updated the graphics card driver and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How to optimize the signal from my router?

  When Im in a room on the ground floor, hence my router is in I can barely get a signal on my iPod Touch and the Xbox!   I was wondering if there is a way to optimize the signal from my router so that I won't have no connection issues... PS.  sometimes resetting the router help, but not as much as I'd like.

  Try these settings.

  Access the routers admin pages.  Connect via a wired computer to 192.168.1.1 with your browser, the empty user name, the password "admin" (everything that you change too).

  Disable UPnP.  Under settings wireless Beacon interval 75, RTS and Fragmentation threshold to 2304.  Try channel 1 or 11.  Save the settings and reconnect.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• My Toshiba 22EL833G ceases to receive the signal from my Satellite U300 - 13H

  Hello

  When I connect my laptop to the TV and turn it on, I first receive signal at the entrance to loading windows, but when it comes to enetring my password, stops the TV receives the signal. I'm sure that problem comes from the TV as when you use another screen, everything is ok.

  Does anyone know what I can do?

  Thank you all for your time

  Hello

  What password do you mean exactly?

  If you think the troublemaker is your TV then you're in big trouble.
  Why? Because there's not a lot of parameters that could be changed.

  You must ensure that you use HDMI right channel (I assume you are using HDMI connection). From my point of view, it is one and only parameters that must be set for television.

• filter the peaks on the signal from ECG pulse!, help!

  Hello

  I have RCV of the ECG signal. I filtered the ECG signal and get the resource (interval between each pulse of ECG) records.

  

  The source of the signal have noise I use a threshold but sometimes spikes of failure. Like the previous capture. Normally, if you get a pic of fault detected, I'll try to find this index to add to the left or right of the peak, normally I add to the lower value. This works if it has only a bad impulse between 2 good.

  The problem come when I have more than a ridge between the two coupons.

  Also, when the impulse of R a loss threshold I have trying to find the index and get 2 new reading making division 2 peak value.

  I have attached the method I've used to adapt it. I only works if I have 1 Ridge added on real measures of R or pulse 1 loss R, when I have several pics no work.

  I would like to hear an idea to make it work better. I don't like the idea of removing the value interval, I have 2 hours of reading and if I remove the values I have lower data outoput is why I tried to summarize or division of values to get the correct reading without losing any data.

  Perhaps, there is any better filter for ECG of entry, so I have a R-own pulse and less noise between ECG pulses.

  Any advice is welcome.

  Best regards, Fred.

  Almost.  in the last step, you have extracted the real part of the complex waveform.  Instead, you must retrieve the extent.

  

  BTW, this idea isn't mine.  I got from this article

  http://www.ScienceDirect.com/science/article/PII/S0010482501000099

  

• How to select the signals from the output of a DAQ assistant

  Hello!

  I am a new user of Labview 8.5 and I work with a USB-6210. I have two different instruments connected to the same USB device, half of the channels are used for the transducers of pressure where I only need reed and record data, while the other half are associated with TCD detectors where I need to perform an analysis of the signal to get and save the data. I'm in the first stage of construction the block diagram, once I have defined each of the signals that its correspondent of channel using the DAQ assistant, I need to select and separate the signals coming from sensors of pressure from those who come by the TCD detectors, before that I can continue to draw the block diagram. I am using the function select Signal, but I don't know how to do this. Can you get it someone please let me know at least in which manual, I can find a good explanation? I have read the getting started and the LabView user manual, but they have not been very helpful so far.

  Thank you!

  I fixed it. As you say, I had some mistakes in the thread, but it's working now. Thank you very much for your help! It was very useful.

• TouchSmart 610 unable to receive the signal from the configuration box

  I have HP 610 TV tuner equipped touchsmart all-in-one.  TV work very right up until a few days ago, when I couldn't have a signal from the cable box.  Box has changed and cables without result.  Tried a HDMI cable, but can't find the source selection.  Hung a small tv for the area with a perfect image, so that the excluded the cable/box issue.  Very grateful for any suggestions/advice/help.  Thank you!

  Hi again SuZQT,

  It is good to hear from you!

  To enable your system to receive a signal once more, I recommend you to return your system to a previous restore point before the problem occurred. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Improve the signal from the router

  Hello, I need a Wi - Fi Range Extender, I take the powers a little signal.

  The technology of these accessories and take a signal and strengthen it as a router or a switch-> Range Extender WiFi-> and the client has an attenuation of the signal?
  It remains the same as that which carries the router?
  It strengthens it so that you have the strongest signal for customers.

  My problem.
  Router standar Telecom in an apartment of the third floor of a building where the ground floor it is local (shop with three slides) who must pick up the signal. Now that with the router, the signal arrives but, weak, and there is a local point where the signal and the stronger, enough to be able to navigate with a non-performing smartphone.

  We would like to put a Range Extender Wi - Fi to the strongest step to bring it to the customer.

  Your WiFi Range Extender are all uquali for the work that I do, or I have to evaluate some of the same characteristics.

  I explained enhancement, signal loss?

  Thank you.

  Hello creatt

  An Extender, you should get better report you would like to place somewhere in the middle where you need wifi and the router to get the best coverage.

  DarrenM

• How to extract the signal from the waveform of my power level designated?

  Hi all

  How can I extract the signal of the waveform accroding to the power level? I read the Trigger & Gate .vi, but this vi retrieves the signal duration. I want to extract the signal depending on the power level.

  As shown in the following figures, the signal I want to deal with is between 130000 to 140000, if I Zoom, I can see the useful signal is between 135400 to 138200. The question is how to extract the signal in the area?

  I tried the sub_NoiseEst_And_Chop_Shell.vi in the example of Packet_based_link also, but this Subvi seems to be a bit slow. Can someone give me the best advice? Thanks in advance!

  

  

  I'm working on something similar, but have not had time to fully develop.

  My idea was to use an envelope detector (low pass filter) and then use a detection of energy VI on the envelope.

  Here is where I left

  

• AE6000 sometimes stops the signal from my router 5G

  I manually installed the driver for my AE6000 in my newly updated windows 8, it works very well with my router 5 G - AC (TP Link Archer C7), however, when I turn off my desktop computer, loses 5G signal in my router and I have to restart my router to get the signal of 5G (it is not affact 2. 4 g my router is at the same time broadcasting 2.4 G and 5 G). I did not have this annoying problem when I used Windows 8 with AE6000 on my desktop and windows 7 with AE6000 on my laptop.

  It happens all the time, 20-30% chance. What is a compatible driver issue? Is there a solution before the next driver? Thank you!

  Hi, apeyrosi. For me, it is not a compatible driver issue. As long as you are using the correct driver for your card, then is should not be any problem. Have you tried changing the channel on your TP Link Archer C7 wireless? If you haven't already, then I suggest you do to fix your WiFi problem

• Lost the signal from the network

  My Xperia z5 lost network signal even I have signal in my area, it's because I updated the software? How can I solve this problem?

  @Georgian86

  You can either contact your Local support or your corporate network in this respect.

• Wireless LAN does not receive the signal from the router

  Yesterday, I bought a toshiba satellite pro L10 and it's got wireless, but for some reason some can't find any network even when I'm in the same room as the router. What can I do?

  Hello

  Well. First of all, check if the wireless antenna is turned on. Check the switch on the side. In addition, with the FN + F8 key combination, you can switch between the Bluetooth card and wireless.
  In the next step you should check the wireless network connection properties
  The option use Windows to configure my wireless network must be marked.

  Good luck

  Good bye

• HAVE fast acquisition after the signal from trigger-DI

  Hello world

  the work of the VI I train is basically very simple:

  There are 8 analog inputs, which need to be given reading a entry digital-trigger after.

  Parameters: frequency of sampling per channel: 2 ms/s, number of samples per channel: 1024

  This acquisition is very often repeated (1000 x +). So I put the trigger and the part of reading inside a while loop. The task initialization happens before this loop and the task is closed later.

  The problem that I have is the speed! The acquisition itself (1024 samples/channel to 2 ms/s/channel) should (in theory) be done in the ~0.5ms but actually lasts longer...

  My goal is to make the process: trigger-> acquisition in 2ms. He is currently, reliable with a rate of repetition of 15ms. ~

  Do you know the guy in any way to increase the speed? I played a bit with manually set size of buffer and initialize a task dedicated for the trigger itself. The two does not improve it.

  Hardware DAQ-I'm by train is USB6366 and a system of SMU with a PXIe6368 inside.

  I don't really know where this quite simple line, time is lost...

  Best regards and thanks,

  Michael

  Hello mschoeff,

  If I understand you correct you want to retrigger the acquisition. Then you must

  Configure the trigger outside all loop and use the node property to enable the trigger.

  Here is an explanation:

  Support for redeclenchables tasks on X Series multifunction data acquisition cards

  It may be useful

• No Signal from my hp probook 4320 s on TV with the HDMI cable

  Hello, I have a hp probook i3 4320 s, and recently I have buy a new lg led tv, my problem is my new TV can not get the signal from my laptop, please help me, thanks

  Hmmm, if the screen is black no don't say no signal?
  This means that it is signal to the TV, but don't not why I cannot display graphics.

  Refer to:

  http://Windows.Microsoft.com/en-CA/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Then see (in order to please):

  https://sites.Google.com/a/mhelp4u.com/mhelp4u-com/Windows/Windows-7/How-to-scan-for-hardware-changes-using-Device-Manager-in-Windows-7