Wireless LAN does not receive the signal from the router
Yesterday, I bought a toshiba satellite pro L10 and it's got wireless, but for some reason some can't find any network even when I'm in the same room as the router. What can I do?
Hello
Well. First of all, check if the wireless antenna is turned on. Check the switch on the side. In addition, with the FN + F8 key combination, you can switch between the Bluetooth card and wireless.
In the next step you should check the wireless network connection properties
The option use Windows to configure my wireless network must be marked.
Good luck
Good bye
Tags: Toshiba
Similar Questions
-
My tv is not receiving a signal from my computer when I connect it via cable.
problems with the computer to the TV.
my tv is not receiving a signal from my computer when I connect via wires, I unplugged both ends and reconnected without result.
I see on my computer if she went out a signal?
Make sure that you connect to the right port.
http://Windows.Microsoft.com/en-in/Windows-Vista/connect-your-computer-to-a-TV
Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest compatible driver graphics card.
-
EX 60 does not receive the CUCM phonebook directory
Cisco EX60 is registered on the CUCM, but it does not receive the phone book. IP phones receive the directory.
Cisco Services for user data is active and running.
CUCM system version: 9.1.1.20000 - 5
EX60 software version: TC6.3.1.f768649
You must mention the URL of the directory on your EX60 in order to extract the CUCM directory.
EX60 login go to Configuration > server directory > URL and mention of the URL in this format:
https://: 8443/cucm-uds/users First, you can test by opening this URL in a browser to verify if it is correct.
-
map does not show the routes and directions
This feature is not yet supported in India.
http://www.Apple.com/in/iOS/feature-availability/#maps-directions
In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.
Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.
-
Pavilion dv6: Notebook does not receive the signal of 5 GHz
Hi, recently I bought a new modem router with the capacity of 5 GHz. After the establishment of the net, my laptop does not have the SSID. Other devices receive the SSID and connect to. How can I check, discover and recognize the net working at 5 GHz
Hello:
Most likely your laptop is only a single wireless card band (2.4 GHz) (model ending in bgn suffix).
Virtually no consumer class computer laptop HP made at the time came with a wireless card dual band (model ending in abgn or agn suffix).
Even those made today... most of them still have cards of single band.
-
BlackBerry blackBerry 10 does not receive the emails from the exchange server
Hello
We have the problem that peripheral Blackberry doesn't synchronize with the server exchange since last week. This is valid for two (classic / Z30) among the four devices, the other ones (classic / Z10) are functioning normally. All have the 10.3.2.2474 version.
I rebooted the unit and removed and rebuilt the e-mail account on the BB, but it doesn't help. Account settings are ok (no messages during installation). The device connects to the exchange server (for example, I can see the account's e-mail records in the options) and I can also send mails. But I don't get e-mails, calendar items, contacts, etc.
Any ideas?
Thank you
Axel
Hello
I'm not 100% sure, but I think that there is a restart due to the update of the BONE last week. I don't know if this has coincided with the problem.
I reloaded the OS yesterday via the LINK. It seemed to me that does not solve the problem because I have not yet received mail for a while. However, this morning the mails were back.
-
Satellite L300-19Y - wireless LAN is not in the list of devices
Hi I need to throw this one out there incase I throw my pc a bridge...
I have a Toshiba Satellite L300-19Y which recently gubbed the HD, so I replaced and am trying to install XP SP3.
However, even with what i belive to be the correct drivers I can't seem to access my wireless LAN.
I installed most of the pilots involved, and have access to the Internet via the NIC with a connecting cable.
It was a struggle to get even, even if I really need a wireless...At the moment the wireless device does not appear in the list of devices, although I can see my network card.
I have some thoughts on how to activate the wireless, I tried to install the driver manually wireless but didn't get any wherever I get a code 10 XP Shutdown response.I've updated the BIOS, I have the latest drivers 8187b, I installed the kernel, the chipset, the display and audio drivers... etc.
I installed a new copy of XP but you have not installed all the drivers until I know that the correct procedure...Any ideas would be appreciated...
Arghh!
Andy
Hello
You should try to activate the WLAN using the hardware on the laptop switch (must be defined on and with the combination of keys FN + F8.
Did you do that?In addition, you can get all the drivers for your laptop on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversI assume that you have installed your laptop with a disc of Microsoft, so you should try it with the Toshiba recovery disc. It contains an image of the settings from the factory with all the drivers and tools. After that, everything should work fine on your laptop.
Check it!
-
Adapter title: original network
I use the network wireless from my IPhone and next to the connection, there is a message that says "the ability of your network adapter does not match the requirements of this network" it still works, but I don't know why I get this message. The connection is blind. The only thing I did differently is update my phone to 4.3.3
Contact the iPhone support:
iPhone Support
http://www.Apple.com/support/iPhone/contact/Support forums:
https://discussions.Apple.com/index.jspa -
Wireless device does not work after downgrading from Windows 7 to Windows Vista.
Original title: wireless device does not.
recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?
If your computer manufacturer does not have Windows Vista drivers available, you're probably out of luck. Without drivers for these devices will not work.
'spyc' wrote in the new message: * e-mail address is removed from the privacy... *
recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?
-
Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?
Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.
What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?
What model number is the most convenient airport?
Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.
In addition, not all drives are recognized.
The internal drive of the TC must be recognized, but there could be problems as well according to the age.
-
Satellite A30 Wireless LAN does not
Im not sure how long my wireless LAN is not working, it may be something to do with the SP2 download. I lit but no flashing light. Here is the system of information on the PCI card. Have no idea about computers can someone help?
Andy
Name [00000002] Toshiba Wireless LAN Mini PCI Card
Card type not available
Product Type Toshiba Wireless LAN Mini PCI Card
Installed Yes
PNP ID of device not available
Last reset 24/10/2007 12:27
Index 2
Wlluc48 service name
IP 10.0.12.119
IP 255.255.255.0 subnet
10.0.12.202 default IP gateway
Active Yes DHCP
DHCP server
DHCP lease expires not available
DHCP lease obtained is not available
02:21 MAC address: 0C: FD:CB:B2Hello
First of all, you should check if the wireless network adapter has been properly recognized in Device Manager.
Otherwise->, reinstall the WLan card driver
If Yes,-> check the TCP\IP protocol properties if everything on automaticI put t know how you have configured the wifi but there were two possibilities;
You used the Windows's own configuration options or you used a tool 3rd as Intel ProSet or Atheros client utility.Generally, you should check all simple options such as the SSID, WLan encryption, mac address filtering, etc to know what s wrong.
-
DMZ-Link bandwidth does not change the routing table countin traffic
Hey guys
I'm INE laboratories dong and shoved a weird one that delivers.
I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.
Here is my configuration:
Rack1R6 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 54.1.1.254 distance-54
neighbor 54.1.1.254 dmzlink-bw
neighbour 155.1.67.7 distance-300
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
No Auto-resume
Rack1R6 (config) #.
Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 54.1.1.254 0 54 I
* > 28.119.17.0/24 54.1.1.254 0 54 I
* > 112.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 113.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 114.0.0.0 54.1.1.254 0 0 54 I
* > 115.0.0.0 54.1.1.254 0 0 54 I
* > 116.0.0.0 54.1.1.254 0 0 54 I
* > 117.0.0.0 54.1.1.254 0 0 54 I
* > 118.0.0.0 54.1.1.254 0 0 54 I
* > 119.0.0.0 54.1.1.254 0 0 54 I
r > 155.1.0.0 0.0.0.0 32768 I
Rack1R6 (config) #do sh ip bgp
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i28.119.17.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i114.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i115.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i116.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i117.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i118.0.0.0 204.12.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
*> 54.1.1.254 0 0 54 i
* i119.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
r i155.1.0.0 155.1.146.4 0 100 0 I
r> 0.0.0.0 32768 i
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* > i205.90.31.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i220.20.3.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i222.22.2.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
Rack1R6 (config) #.
# now R4 configuration
Rack1R4 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 155.1.45.5 distance-200
155.1.45.5 route-neighbour card GAME-54 on
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
neighbour 204.12.1.254 distance-54
neighbor 204.12.1.254 dmzlink-bw
No Auto-resume
Rack1R4 (config) #.
Rack1R4 (config) #do sh ip bgp Synt.
Local router BGP 150.1.4.4 identifier UNDER number 100
BGP table version is 18, table 18 main routing version
15 entries for network using 1980 bytes of memory
18 entries for path using 936 bytes of memory
9/7 BGP path/bestpath attribute entered using 1512 bytes of memory
3 entries for BGP AS-path ACCESS using 72 bytes of memory
1 entries PMO community, using 24 bytes of memory
0 cache entries of BGP route-map with 0 bytes of memory
0 cache entries of filter-list BGP using 0 bytes of memory
Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory
BGP using 4620 total number of bytes of memory
Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3
155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3
204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10
Rack1R4 (config) #do sh ip bgp
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* i205.90.31.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i220.20.3.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i222.22.2.0 155.1.13.3 0 100 0 200 254?
Network Next Hop path metrics LocPrf weight
*> 155.1.45.5 0 200 254 ?
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
* > 205.90.31.0 155.1.45.5 0 200 254?
* > 220.20.3.0 155.1.45.5 0 200 254?
* > 222.22.2.0 155.1.45.5 0 200 254?
Total number of prefixes 14
Rack1R4 (config) #.
# and where is the real problem, R1
Rack1R1(config-Router) #do sh ip bgp
Version of BGP table is 15, local router ID is 150.1.1.1
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i28.119.17.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i114.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i115.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i116.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i117.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i118.0.0.0 54.1.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
* > I 204.12.1.254 0 100 0 54 I
* i119.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i155.1.0.0 155.1.146.6 0 100 0 I
* > I 155.1.146.4 0 100 0 I
* > 205.90.31.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 220.20.3.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 222.22.2.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0
112.0.0.0/8, version 4 BGP routing table entry
Paths: (2 available, best #2, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Announced for the update-groups:
1 2
54 50 60, (from a customer-RR)
54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)
Origin, IGP, 0, 100, valid, internal multipath localpref metric.
DMZ-Link Bw 250 KB
54 50 60, (from a customer-RR)
204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)
Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best
DMZ-Link Bw 12500 KB
Rack1R1(config-Router) #do sh ip route 112.0.0.0
Routing for 112.0.0.0/8 entry
Known through 'bgp 100', 200, 0 distance metric
54, internal type tag
Last update of 204.12.1.254 ago 00:15:30
Routing descriptor blocks:
204.12.1.254, 155.1.146.4, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
* 54.1.1.254, 155.1.146.6, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
Rack1R1 (config - Router) #.
as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...
can you please help me if I makeover anything in my setup?
Hello
Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.
-
Desktop elite keyboard 1011 Microsoft Wireless model does not install the drivers please help
well, I have a model of elite microsoft 1011 wireless keyboard and a wireless microsoft 1012 receiver model (it's a combo with a mouse, but is he missing)
My problem is that I installed windows 7 x 86(32 bit) and I tried to plug right in my keyboard wireless via reciever.at first the 3 LEDS that have notified when keys locking are activated cycle first.
After that he was known as 3 times it stopped.i unplugged the receiver thenreplugged in.this timw there no same cycle.
I opened Device Manager to check the drivers.it been regestering unknown so I googled the names and found the microsoft drivers (don't know if it's maybe for a newer version on or not, he had the series in the installation) I installed them I clicked on one that says Microsoft elite wireless keyboard then install.after knowing it was installed I opened dev.manager and check to see if it helped it was always regestered as unknown so I restarted my computer and check again, but the same
any help would be useful
If I remember correctly he did for win98/xp
Oh, this is for her tech data sheets
Sorry if the question is already asked that I tried to be as straight as I could be
http://docs.google.com/viewer?a=v&q=cache:pXBz4ER-bMwJ:download.microsoft.com/download/3/b/e/3beedec5-0835-42b4-bfdf-0084f6d6d530/TDS_WirelessOpticalDesktopElite_0502A.pdf+microsft+desktop+wireless+keyboard+1011&hl=en&gl=us&pid=bl&srcid=ADGEESiy7Tv5ivEWg0Bq76vRRMyn28r2TtQFEk-z0Fzsw6R3zP8KsdqKh4mIxpYdE2tNp3EJ2QE4Fz1BwySrv_czKk_0fCB-ES0zHUaVjO1unTtsjoUdq56qWeT_iuGS0FP7neq_JHXh&sig=AHIEtbQUklfEshI_IP9Z_3X-A9uGsTXYsw
If you have yahoo messenger installed on your computer send me a message if you have anything I can try this * address email is removed from the privacy *.The 7.10.344.0 driver version is the one offered to the keyboard itself.
For office all the proposed version is ITPx86_1033_7.00.260.0.exe.
You have a line of brief and clear view between the dongle and the keyboard? The signal may be weak or the dongle damaged the transfer to the new system.
-
Satellite U500 - 11G - wireless LAN does not work
Please could some help me because I have a problem with the Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
Whenever I turn on my laptop in the seem to do not to work. You put the laptop restarting and it works I tried to talk to the pc world, where I had the laptop but I seem to be hitting a brick wall with them.
I had some other Toshiba laptops and never had this problem. I also will not download the date is
Sometimes every reboot of the router can help. ;)
Can you detect some other router in your area?
Do not forget that the same protocol is enabled on the router and laptop.
Often the small error in the WLAN settings is responsible for connecting Wireless does not. -
I have controls Pro does not receive the volume update on the evolution of the patch
Hello
An I-controls Pro connected USB sending volume updated MainStage; but does not not not the volume update on the evolution of the patch
What is the tric?
I have a screen midday traffic, MainStage send nothing
Thanks in advance
Best
Cyril
P.S. I have controls Pro receive volume update logic in mode 'Logic control '.
Hello
Depending on how you have all put in place, it should simply be a case of select controls in Layout Mode and choosing the correct MIDI port in the box "Send value to ' in screen control inspector
TDC
Maybe you are looking for
-
How can I change the default search engine in the search bar?
Everytime I open firefox default search in the search bar engine little is still Yahoo, and nothing I do changes it again to google permanently. Even when I type something in the address bar it uses yahoo. Ive tried everything, including going in to
-
2 surface: the surface of my hp 2 does not turn
the surface two don't put running, even after the market for 60 years and press on IT or OFF several times
-
Cleaning of the printheads to 6980 in windows 7?
It's maddening! I can't believe that there is no work around for the Toolbox missing in windows 7. I NEED to clean the print heads and can't understand how. I tried to do it manually according to instructions from HP (keep the button / stop, press
-
I downloaded the software from the HP (AIO_CDB_NonNet_Full_Win_WW_140_408.exe) website. When I try to install this software on my new computer 500 - HP Pavilion c60, out of the error to install it with a message that a file is missing (hpzshl.ice_s.
-
Pavilion G4-2127tx: upgrade of RAM Maximum for HP Pavilion G4-2127TX
Hello! I just downloaded CPU - Z to verify my information system and found that 2 of my RAM slot is empty. Is this correct? And if there are 2 slots would it be possible to buy another for slot 2 and increase my RAM from 4 to 8G? Thank you very much