Integration with existing SSO/OID infra existing EBS.

Similar Questions

• Integration of EBS with SSO/OID/OAM

  People - I did not understand if this is the right forum to post.
  
  We run 12.1 E-business - and have enabled SSO using the normal route of authentication OID/LDAP in AD from a server Linux X 86 - 64
  
  While we run E-Business on linux Z, the SSO/OID instance is running on a stand-alone server for x 86-64 linux.
  
  My question is this - is being replaced by Oracle Access Manager (11g) SSO?
  
  Also the application server is being deprecated in favor of Weblogic server for forms and reports in the E-Business Suite for future versions?
  
  If I'm level OID 10.1.4.3 to OAM 11 g, everyone sings the steps successfully... There is a lot of information available on 1304550.1, 876539.1, 975182.1 and 1286596.1. These documents, however, take you in circles...
  
  Can someone who has just experienced a succesfull install and integration in E Business Suite, point me in the right direction?
  
  Thank you

  My question is this - is being replaced by Oracle Access Manager (11g) SSO?

  Migration Oracle Single Sign-On 10 g (10.1.4.3) 3 to Access Manager Oracle 11 GR 1 material with Oracle E-Business Suite [ID 1304550.1]
  Procedure step by step to integrate E-business suite with Oracle Access Manager. [832456.1 ID]
  Integration of Oracle E-Business Suite with Oracle Access Manager 11 g using Oracle E-Business Suite AccessGate [1309013.1 ID]

  .. I see that you already have the docs referenced in your post!

  Also the application server is being deprecated in favor of Weblogic server for forms and reports in the E-Business Suite for future versions?

  An overview of the E - Business Suite 12.2: WebLogic Server and online marking
  http://blogs.Oracle.com/stevenChan/entry/glimpses_of_e_business_suite

  If I'm level OID 10.1.4.3 to OAM 11 g, everyone sings the steps successfully... There is a lot of information available on 1304550.1, 876539.1, 975182.1 and 1286596.1. These documents, however, take you in circles...

  Can someone who has just experienced a succesfull install and integration in E Business Suite, point me in the right direction?

  You already have the docs - I don't him not get tired myself.

  Thank you
  Hussein

• Integration with Active Directory or SSO OID?

  We seek in our options of single sign-on integration with OBIEE Oracle EBS 11.5.10 on top. Currently we have MS Active Directory and Oracle Internet Directory with our users synchronized upward in both.
  
  Can anyone recommend which is better for the OBIEE LDAP/SSO integration and provide the pros and cons of each? Thanks in advance

  PTRAN2,

  If you have any OID then use with AD, you also an external table if you want to be able to define groups, CheminPortail etc. Groups and users can currently be imported, ad, only authenticated against it. It works fine but OID should be admin much more straightforward.

  Ed

• WED ADI error "BY PER_289872_ADI_INTGR_EXISTS: an integrator already exists with this object name.

  Hello

  I try to create a new Integrator, but get the following error when importing to create the Integrator:

  "BY PER_289872_ADI_INTGR_EXISTS: an integrator already exists with this object name.

  I created these several times and it's the first Integrator that I create for this download balance adjustments.

  Any suggestions on what I am doing wrong?

  Thank you.

  Do you get the error even if you use a different name?

  Thank you

  Hussein

• Join the domain with existing VM

  Hello

  How can I join a domain with existing virtual machines? We have a couple of VMs that we want to join a domain via the command (PowerCLI) file. etc name should stay as it is, only a domain join must be made.

  Thanks in advance.

  CU

  Rainer Friedrich

  You can try to create a new OSCustomizationSpec (New OSCustomizationSpec) with only the domain (domain, DomainUserName, DomainPassword) join.

  Then, apply the OSCustomizationSpec to the VM (s) with the Set-VM cmdlet (and the OSCustomizationSpec parameter).

• change the angle of view of grid 3D with existing objects

  Hello

  I'm new to the perspective grid in Adobe Illustrator and would really appreciate some help. I created a simple room with a 2-point perspective Interior and an angle of 45 degrees. I will now show the same room with an angle of 60 degrees. Is it possible to change the angle of view of 3D with existing objects in it or what I need to re-create the room with a different view angle each time? Can I change the numbers in perspective to define and changes to the grid, but the House does not seem to change with it.

  Thanks, Conny

  the perspective grid is just a load of directives fantasies. It does not affect what you draw after one more as a similar grid drawn on paper could.

• WebCenter content can be integrated with Oracle iStore or Oracle EBS?

  Hello
  
  WebCenter content can be integrated with Oracle iStore (as seeds/integration without many glitches/modification) or Oracle EBS as a whole?
  
  Thanks in advance.
  
  Srinivas

  Hi Srinivas,

  Yes, ECM can be integrated with Oracle EBS (suite business enterprise) and thus other Oracle applications such as Peoplesoft, Siebel etc..

  Details can be read from the following link: http://docs.oracle.com/cd/E23943_01/doc.1111/e17953/toc.htm

  Thank you
  Srinath

• Not able to apply the filter on certain groups of OBIEE integrated with EBS

  Hello
  
  We have integrated with EBS OBIEE. There are some pre configured in OBIEE RPD groups. These groups are all members of the Group GL safety rules. I applied the filter of some safety GL group business model... But are not filtering data for certain groups. For the rest of the groups it works fine.
  
  I applied after filter on table GL Business logical area. (VALUEOF (NQ_SESSION. ("" EBS_BUSINESS_AREA_FULL ") = 'X' OR Core. "Dim - GL business district '." "' Level 20 business code" = VALUEOF (NQ_SESSION. (("" EBS_BUSINESS_AREA "))
  
  But this filter does not work for the following groups
  (1) OBI Budget content Global Support
  OBI 2 overall content power user)
  
  While it works very well for the following groups
  (1) OBI UK broadcast finance.
  Director of finance 2) OBI UK broadcast.
  
  I'm new to EBS. If someone can explain how the EBS group are mapped with RPD OBIEE groups and how the security is implemneted then it will be a great help.
  
  
  Thank you
  Sandeep

  Hi Sandeep,

  You mean in Oracle eBS? That it would be something like this;

  Select user_id fur.user_name
  user_name fur.description
  rsp.responsibility_name
  rsp.description responsibility_description
  of apps.fnd_responsibility_vl RER
  apps.fnd_user_resp_groups furg
  applsys.fnd_user fur
  where rsp.responsibility_id = furg.responsibility_id
  and furg.user_id = fur.user_id
  and fur.user_name like nvl(:p_user_id,'%')
  and rsp.responsibility_name like nvl(:p_resp_name,'%')
  and furg.end_date is null
  order of rsp.responsibility_name;

  If you mean for Oracle BI EE, check the repository via Manager, security.

  I hope this helps.

  Good luck

  Daan Bakboord
  http://obibb.WordPress.com

• Error SSO to access plugin auth. Integration with third-party access

  Hello
  Whit a SSO using integration with third party access.
  I create a class of access and configuration of policy.properties.
  
  but the small jets, I'm trying to access the Oracle Portal, I get this error:
  
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] AJPRequestHandler - ApplicationServerThread - 6 FilePolicyManager.getAuthClassName: retrieve the plugin n
  SOUL for, MediumSecurity_AuthPlugin
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] AJPRequestHandler - ApplicationServerThread - 6 FilePolicyManager.getAuthClassName: auth card back
  in name, INE.security.ssoplugin.SSOINEAuth
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] AJPRequestHandler-ApplicationServerThread-6 creating instance of the auth plugin: INE.security.ssoplugi
  n.SSOINEAuth...
  Sun Mar 07 06:49:16 MEETING 2010 [ERROR] AJPRequestHandler - ApplicationServerThread - 6 Auth object, INE.security.ssoplugin.SSOINEAuth could not
  t be created: null
  Sun Mar 07 06:49:16 MEETING 2010 [DEBUG] authentication of the call of AJPRequestHandler-ApplicationServerThread-6
  Sun Mar 07 06:49:16 MEETING 2010 [ERROR] AJPRequestHandler - ApplicationServerThread - 6 Unexpected Exception received
  java.lang.NullPointerException
  at oracle.security.sso.server.ui.SSOLoginServlet.processSSOPartnerRequest(SSOLoginServlet.java:796)
  at oracle.security.sso.server.ui.SSOLoginServlet.doPost(SSOLoginServlet.java:328)
  at oracle.security.sso.server.ui.SSOLoginServlet.doGet(SSOLoginServlet.java:285)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
  at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
  to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
  at java.lang.Thread.run(Thread.java:534)
  
  I compiled it:
  AVAC - classpath $ORACLE_HOME/j2ee/OC4J_SECURITY/applib/INESSO.jar:$ORACLE_HOME/sso/lib/ipastoolkit.jar:$ORACLE_HOME/j2ee/home/lib/servlet.jar SSOINEAuth.java.
  
  and I can use:
  
  AVAC - classpath $ORACLE_HOME/j2ee/OC4J_SECURITY/applib/INESSO.jar:$ORACLE_HOME/sso/lib/ipastoolkit.jar:$ORACLE_HOME/j2ee/home/lib/servlet.jar SSOINEAuth.java.
  
  but at SSO can´t use this class.
  
  can it help me?
  
  Published by: rocamora on 15-mar-2010 14:36

  Hi rocamora,.

  The OSSO server is not finding your plugin in the classpath. When you compile the code, you can try this.

  javac - classpath $ORACLE_HOME/j2ee/OC4J_SECURITY/applib/INESSO.jar:$ORACLE_HOME/sso/lib/ipastoolkit.jar:$ORACLE_HOME/j2ee/home/lib/servlet.jar d $ORACLE_HOME/sso/plugin SSOINEAuth.java.

  -Vinod

• 5.6.3 (EBS) editor XML can be integrated with APEX?

  On the following document, Publisher 5.6.2 XMP supports no integration with APEX. Can I know 5.6.3? What is the product being an add-on with EBS causing the supporting integration (i.e., 5.6.3 even is not taken in charge)?
  
  http://www.Oracle.com/technology/products/database/application_express/HTML/configure_printing.html
  
  Thank you
  Rownald

  APEX integrates with the standalone version of BI Publisher. It was not a component of server with the standalone 5.6.3. The integration is based on the editor providing a servlet for APEX contact, 5.6.3 do not have that.
  If you're talking 5.6.3 under EBS then I guess you could build a servlet on the mid-tier that calls the API conversion of BEEP - it would all be a custom job.

  The integration of the APEX needs 10.1.3.2 BEEP to work with out of the box.

  Concerning

  Tim

• Integration with non-Oracle EBS products

  I'm new to EBS (I try to install EBS for myself and also - I'm going through the documentation), and I'm trying to figure out is - it possible to Exchange data between modules of the EBS and non-Oracle applications. I found nice about Oracle API links, Biz adapters and so on and I'm going to study them, but when I'm looking on some specifice modules, then their sheets contatin very limited integration with non-Oracle, actually - I assume that they are carefully selected partners. Then - I wounder, I feel of the documentation that the EBS is fairly open and we can build anything on them or in their breast, but - now I have doubts about this.
  
  Well - from my experience as a developer Oracle-no, I know that data exchange is a fairly common task and it can be a big pluss for system, if its data and services are, for example exposed as web services for inclusion in the larger process and so on. EBS aims in different ways (for example to restrict the user from the bowels of EBS EBS-sphere modules)? Right now I'm doing some specifications and requirements for a research project and I'm confused if I include my software with EBS integration or not, perhaps such integration is impossible?
  
  Published by: user454720 on 2008.17.12 14:58

  Hello

  Open interfaces were for the main entities for a long time, for example for financial services - AP invoices, bank statements, receipts (Lockbox) etc.
  With release 12, there are several APIs / open Interfaces with the general move towards Web Services (although not yet here!)
  You can find "end points", etc. of the API/Open Interfaces to http://irep.oracle.com
  All them above are supported with your standard EBS Support license.

  When you hit something where it is not an open Interface or API, then you move into solutions not supported. All database entities are visible (IE. Open) and the majority of the code is open or extensible. Of course if write you / change any support then moves to your responsibility. Use as much as possible private API (for example the API of PL/SQL using forms).

  So, in addition to the customization and expansion using the standard tools of the EBS UI/backend (OFA, forms, reports, PL/SQL, discoverer, Workflow, etc.), I know of people who have a front-end for data EBS using Oracle APEX (HTMLDB), PHP, c# .net, etc. of the ADF.

  In short, you can do whatever you like exchanging data, but there are moments where you go not supported...

  Kind regards
  Gareth

• Help on vSphere 6 upgrade with a SSO strategy internal-> external PSC

  I would ask an idea and help on what and how to revamp our vsphere infrastructure.

  We have an environment that grow very fast in the last 2 years... from a Center unique vcenter/infrastructure for our server environment us growth data center 2 main + 1 small site with a 2nd arriving within a few months, and probably a good number of branches.

  Our main data center 2 are configured with vCenter 3 5.5:

  (1) our main Server vCenter

  (2) our Horizon vCenter for VDI

  (3) a vCenter dedicated to a separate set of servers for a specific project

  All the vCenter are now 5.5u2, but in the past our VDI vSphere still was 5.0, while the rest was upgaded to 5.1 and 5.5.

  The 3) is an environment dedicated with some software/configuration that could conflict or be managed in a way different from our current infrastructure (this ban could remain in an earlier more time for example).

  All these vCenter are configured with a SSO Multisite separated by the environment, so we have a Multisite SSO for server, 1 for VDI and 1 to 3).

  Our vCenter have the PSO and all integrated services in the windows server and a database of separate SQL Server for each of them.

  Verification of certain documents on the vSphere 6 that I noticed that it seems that we have a setup that has somehow changed and thinking about the future and the implementation of new products, I would like to understand how we could manage these infrastructure and how we can join it.

  In this document http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2108548 it seems that manage sites that have integrated the PSC and vCenter Server on the same host is not a recommended way, thinking at least about our vCenter Server main (2 different in 2 sites) infrastructure, we must separate the PSC making external.

  Should we move the SSO outside our 5.5 infrastructure server now before moving on to 6 so that we could improve PSC external SSO and just update our vCenter server or there's a way during the upgrade to the PSC on an external server (such as installing on a new server and migrate SSO to external PSC)?

  Think in the future, we probably want to unify the PSC and use the same servers PSC (2 ha with a LB probably in each site). It is possible during the upgrade a server vcenter Server to migrate from the SSO server/PSC is using another?

  If you want to go out of style incorporated into the external PSC; currently during the upgrade you can not change this IE if it integrated with 5.5 and then it will continue in embedded mode. Future update could be an option / tool to move to external embedded mode PSC post upgrade (this tool is nevertheless do you updated or not; deployment embedded 6.0 can be converted into vCenter pointing to external PSC).

  From now on if you want to pass to the external PSC mode then to 5.5 installation embedded itself move first on external SSO. You can do this by installing separate SSO and re - point your existing inventory, webclient and VC than SSO service. Below KB provides details on the re-score-

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2033620

  Once you are done with the re - verse you can start the upgrade with PSC external.

• SSO OID questions

  On the EBS, system we want to configure SSO and the DIO, I found a Note 376811.1 for the configuration document, after reading this note, I have some questions jounror on configure SSO and the OID:
  1. when configure you SSO and OID, we first need to install an oracle application server?
  2. After you configure SSO and OID, what is the advantage for the EBS system?
  3. What is SSO and OID?
  4. After you have configured the SS and the DIO, how intergrate the EBS system with windows Active Directory?
  5. on Provisiontype, it have four choices, what does this mean?
  
  Help me please, thank you,
  Jackie

  1. when configure you SSO and OID, we first need to install an oracle application server?

  Yes.

  2. After you configure SSO and OID, what is the advantage for the EBS system?

  SSO = Single Sign On, you connect one time and you don't have to connect on EBS again.

  In addition, the document even you-"to access the E-Business Suite Instances with Single Sign-On' section.

  3. What is SSO and OID?

  Already answered above.

  4. After you have configured the SS and the DIO, how intergrate the EBS system with windows Active Directory?

  19 integration with Microsoft Active Directory
  http://download.Oracle.com/docs/CD/B28196_01/idmanage.1014/b15995/odip_actdir.htm

  Configuration of e-Business Suite with native Windows authentication (Ondaaah) [744118.1 ID]

  5. on Provisiontype, it have four choices, what does this mean?

  Already explained in the doc even in the table under 'Setting Checklist', 'Oracle Internet Directory Registration' and ' Section 4: commissioning "sections.

  Thank you
  Hussein

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl