Intel AMT T400s: Can´t access Intel ME Bios Extension

Similar Questions

• HP 630: I can't access hp hp630 bios setting... I do not know my password... can you please help.

  I can't access hp hp630 bios setting... I do not know my password... can you please help.

  Hello

  Enter 42444370

  Kind regards

  DP - K

• How can I access my systems bios and change my away on off mode

  How do I access my computers bios and change my away on off mode?

  Nothing to do with MS or Win

  How you access the bios is determined by your PC manufacturer or the manufacturer of the motherboard. When you turn on firstly, the look of the PC for instructions on the first page visible (often sound by pressing the Del Btn)

• Satellite P850 - can't access boot options

  P850 with windows 8
  Can't access boot or bios options, I have tried all the ussual
  F12
  F2
  Delete
  ESC
  c
  function key more F12
  I tried pressed eah before turning on, I've tried everything I can think of.
  Thought really frustrated, return it to the shop

  Proceed to a complete stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  And after a reboot, press F12 to get into the boot menu.

• Tecra M5: Can not access the internet pages, but can ping in cmd.exe

  Hi all, this is confusing to me.

  I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

  -Intel Pro Wireless adapt
  -Drivers audio Sigmatel
  -nVidia graphics card

  Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

  I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

  I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

  I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

  Thank you very much

  MARC

  Hello

  According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

  Well, in your case I would first check the router settings and re still.
  In addition, you must reset the router.

  Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
  Please note that the TCP/IP protocol settings must be set to automatic.

  Check everything first!

• 2007 Mac Pro screens with pixelated strange habits travel & can't access files or applications.

  Have a 2007 Mac Pro 2.66 GHz Dual-Core Intel Xeon (OS 10.7.5). Today both screens started having strange pixelated, modes of travel, and we can not access files or applications.

  Thought that maybe the video card went bad, but would not be prevented from using the apps, or click files would it? Have to keep restarting the box. Working temporarily, then pixilation and locked files races again.

  Ideas or suggestions?  Don't know how to solve problems

  Thank you!

  Sara

  -What video card is installed?

  I suspect that the pixilation is due to a video card problem.

  Open the cover, with Mac off nd unplugged and clean inside. If the map includes a fan make sure it turns freely.

  -What do mean by "we can't access files or applications? What is going on?

• Strange question WLAN - can't access secure sites

  Hello!

  I just bought a Toshiba L100-120. All right, except the following.

  I can't access the sites secured with the Intel 3945abg built-in. Other sites are OK.

  If I connect LAN, all is well. If I insert my Wireless PCMCIA card, it works also. The only problem is: to access the sites secured with the Intel wireless device.

  I already changed the drivers, I tried everything. It's very strange :(

  Thanks a lot if someone has an idea!

  Hello

  I'm a bit confused of Mr. do you mean WLan secure or secure Web sites?

  If you can not enter the secure, encrypted WiFi network, you must enter the right key.
  In other cases, so some Web sites are not displayed you can try changing the privacy settings of IE for the Internet zone.

• I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green.

  I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?

  original title: IPConfig and lack of internet access

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  =========================  IpConfig ===========================

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• I installed Virtual PC with XP Mode on Windows 7 but I can't access the network from XP Mode.

  Network with virtual xp problem

  I installed virtual xp on Windows 7. but I can't access the virtual xp network. My LAN card manufacturer is realtek but virtual xp Device Manager indicates a intel NIC

  First, know what kind of NIC with your computer:

  1. click on Start > Control Panel > System > Device Manager .
  2. double-click on network adapters .

  Then, adjust the virtual machine:

  1. click on Start > all programs > Windows Virtual PC .
  2. right click Windows XP Mode and click settings .
  3. click on the network .
  4. Select the network card in the computer in the menu 1 adapter on the right side of the window.
  5. click on OK .

• need help WIFI... I can't access wifi...

  I'm of the India... model laptop .my is GSE B39SE... (64-bit windows 7)... This was bought in the Middle East... I formatted my laptop two weeks ago... now, I can't access WiFi... I do not have cd drivers for wifi... I visited the website of HP in the Middle East... and then select my model... and download driver taking care of all the wifi for my model... I tried all the drivers wifi as Ralink 802.11 b/g/n WiFi Adapter Realtek RTL8191SE 802.11b/g/n Wireless LAN Driver for Microsoft Windows Driver Realtek Local Area Network (LAN) intel pro... but still problem exists... Please help me... What is the exact model of the wifi pilot name?

  @sanu_kt,.

  Based on the hardware ID, the following driver should be what you need.

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61219.exe

• How can I access Siri on my iMac without using the icon?

  How can I access Siri on my iMac without using the icon?  Can I say "Hey Siri"?

  There is no option "Hey Siri" on a Mac because they do not have the necessary pickups. You must use the icon in the menu bar or Dock.

• I can't access the backups on Time Capsule

  A month ago I deleted from my hard drive and more. I have a MacBook Pro 2012 running macOS. I can't access the files on Time Capsule before is erased in the month of August, I can see the story in the timeline panel, but I don't have access to anything before erasure. Is it possible to access to the files before the wipe?

  A month ago I deleted from my hard drive and more.

  What hard drive you are talking about: one internal on your MacBook Pro (MBP), an external drive attached to the MBP for Time Machine backups, or internal hard drive to time Capsule?

• Data on the iMac, but can not access the files.

  Hi all

  I have a iMac Core 2 Duo (3.33, 21.5 inches) since end 2009, running 10.6.8 Snow Leopard and I'm trying to recover some files that seem to be there, but I can not access it due to an update of the unfinished software.

  A few years back, I tried the Mavericks update using an external hard drive as the boot drive (at that time there I ran 10.6.7 Lion), installation is never ending and I accidentally deleted this file to start on the outside, so I ended up coming back to his moose BONE, 10.6.8 Snow Leopard.

  He seems to resemble a new install of Snow Leopard, except my old files (about 350 GB) still live on this subject, but I can not access all of the files, or does not even appear in the Finder.

  Would appreciate any advice or tips on how to do to recover my invisible files. Thank you!

  Do you see the drive in disk utility?

  1. Connect the external drive
  2. If it has external power supply, make sure that that is connected
  3. If the external hard drive has a power button, make sure that it is set to
  4. Goto docking station
  5. Click on finder
  6. Goto menu bar
  7. Click the menu go
  8. Choose utility
  9. Double-click disk utility

  The drive will appear in the left column of the disk utility?

  If the answer is Yes, if you click on the drive, and then click on check, what disk utility say?