Phone from my window is not let me configure my microsoft account to download applications

Similar Questions

• Windows does not work with the active Microsoft Account Sign-in Assistant service

  Hello

  I spent several hours today a behavior very strange and problematic of the debugging windows. It suddenly started doing this:

  -After starting, I log in with my password. None of the applications that are supposed to start on windows logon do not start. Taskbar shows nothing. All that requires administrative privileges performer does nothing. If I try to launch msconfig.exe it shows nothing. If I try to run the Task Manager it shows nothing. If I try CTRL + SHIFT + ESC Task manager does not appear. CTRL + ALT + DELETE, and then on the task manager - he does not appear. If I try to run-> taskmgr.exe it does not appear.

  I can do pretty much anything.

  So what I did was run the safe mode and disabled all services through msconfig. WIndows then start regularly. I tried to activate all the services of 3rd third-party and microsoft services disabled and he did run. While I started activation of microsoft services in a mode of binary search until I found that I can have all the services EXCEPT for Microsoft account Sign-In Assistant. If I activate this one, this non-fonctionnalite occurs. If I turn it off, windows are running ok.

  What is going on? I need this service or can I leave this option unchecked forever so that I can use my laptop?

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I understand that the Microsoft Online Services Sign-In Assistant is obstacle to running Windows and basic operations. Basically, this service is used for products Microsoft online several that include operations related to the connection with clients Lync, synchronization and PowerShell Module.

  In order to solve possible authentication problems experienced with this service, I suggest you carefully follow the steps described in the following TechNet article to resolve the problem.

  Microsoft Online Services Sign - In Assistant: how to turn on tracing for debugging

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Windows could not update the Configuration to start the computer. Installation cannot continue.

  Trying to move from XP to Vista Ultimate.  During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue.  Can someone help me with this?

  the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button.  Who find startup errors and fixed them.  I then rebooted and went into windows and was able to install.

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• My acrobat from adobe pro does not work and no earlier version is available download again with my n serial

  My acrobat from adobe pro does not work and no earlier version is available download again with my serial number

  He can count on what version you need to download... Here are the links for the perpetually licensed versions that Adobe has:

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Acrobat 9: 8 - http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

• I have XP and that you want to upgrade to XP Pro, but Windows will not let me.

  My office recently crashed and I replaced the windows XP home that came on the machine.  I also have a copy of XP Pro upgrade that I want to install because pro allows me to office remote host and does not House.  These are both legally purchased copies.  When I try to upgrade to pro it won't let me and warned me that the original desktop version is newer than the upgrade.  I don't like the age I want the features I paid for the upgrade.

  All solutions?

  1. determine what service pack is now installed (right click on desktop and select properties).  You must have service pack 3, but if you have recently reinstalled Windows XP Home Edition, you may have neglected to update at this point.

  2. either consider that if you have a CD for an earlier version of Windows (98, Me, 2000), you can do a "clean install" of XP Pro by booting from the CD-ROM to upgrade XP Pro and then insert the qualifying product CD when asked.

  3. If you want to 'upgrade' to protect the applications and data already installed on XP Home, first back up your data (just in case).  As indicated in the error message, your upgrade installation CD must be equal or superior to your current installation of XP Home service pack level.  Compare the service pack level of your installation of XP Home (see 1 above) and the level of service pack of your XP Pro installation CD.  Then create a CD slipstreamed that combines the real CD XP Pro you have with the correct service pack.  There are many instructions for this on the web.  See http://lmgtfy.com/?q=slipstream+xp

  I suggest that you use nLite (see the first hit in Google search above).

  If your XP CD Pro has NO service pack, you must first integrate the SP2 and then sp3 wake in this.

  If your CD of XP Pro at service pack 1 or 2, you can integrate service pack 3 (for example, you can go from 1 to 3 without add 2).

  Download the file from the service pack 3 Setup here--> http://www.microsoft.com/en-us/download/details.aspx?id=24

  If necessary, download the file from the service pack 2 installer here--> http://www.microsoft.com/en-us/download/details.aspx?id=28

• I just bought a HP Win 7 (unfortunately) workstation running. My previous computer ran HP XP. Windows will not let me install my fonts.

  Don't get me wrong, the HP workstation is great, it's Windows, I just can't stand.

  I tried to double click on the fonts to install and Windows returns an error message. I tried dragging the fonts in Windows 7 fonts folder and it gives me an error message. I downloaded AFM to PFM because Windows says I need the PFM files, but when I run the AFM to PFM, it returns the message that the PFM files are already there.

  I bought a laptop Sony a couple of years ago with Vista and fell on this problem. I despised Vista so I sold the Sony and remained with XP on my HP Workstation. In fact, I was so p - o'ed on Vista, I went out and bought a Mac Pro and Mac Book Pro, as I intend to dump Windows altogether. Unfortunately, the vast majority of my work required of Windows programs.

  Given that, I decided to go for the new HP workstation because I had heard horror stories less on Win 7. I was then going to sell both of my Macs.

  Unfortunately, it was a BIG mistake because now I'm stuck with a work station $3,400 that I can't use to work on my documents InDesign, Illustrator and Word that have all of the fonts I was running XP (and which run WITHOUT problem on my Mac).

  It is a problem of Windows, and when I tried to contact MS supports, I was directed to HP since Win 7 is pre-installed on my workstation.

  I just got the phone with HP Technology Support and they say they can't help because even if it IS a WINDOWS PROBLEM, they do not support software related issues.

  I even tried to copy the font files to the Directory Windows on my old PC, nothing helps.

  I'm willing to put this thing on eBay so I can't empty MS FOR GOOD!

  Any help would be LARGELY APPRECIATED1

  Hi AndrewHerman,

  The steps in this thread has helped other users who have also struggled to install fonts in Windows 7. Let us know if that helps.

• Windows will not let me connect on Skype

  Hey guys,.

  I bought a new computer from Windows 8 nice a few months ago and also installed Skype.

  I had a Skype account for a long time and I have used many.

  Until a few weeks ago, I couldn't get into Skype anymore.

  If I click on Skype icon on my screen, it will open, but then immediately he asks for my password and asks me to connect with my microsoft account.

  But I just want to connect with my Skype account, because I am not fond of linking all your accounts to another, but also why there are different programs.

  So there is a button that says: log each application separately.

  But that does no good because I can not yet connect here with my Skype account.

  Can someone tell me how I can connect with my SKYPE account.

  I'm a little frustrated here and could use help

  Thank you

  Nike

  In order to be able to connect with your Skype account, you must first install the desktop version of Skype. This is the same version that will launch on all previous Windows systems (XP, Vista, 7).

  The currently most recent Skype 6.14.0.104 desktop version can be installed using the msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Windows will not let me receive a file from a friend

  Original title: Windows 7

  Windows does me not receive a file from a friend, they say, could be bad for my computer. I know the person and all he sent me is a list of people. Is there a way to get around what windows did?

  Thanks for any help

  Hold down the ALT key and press F + O + S. On the Security tab, uncheck the box: "do not allow attachments...". ».

  If it's not her, see the answer here by ITknowledge24

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-found-that-this-file-is-potentially/cab2b576-2074-4b26-bf54-571fe03f9ef8

   

  In the future: help for Windows Live Mail is located in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• My components fax service windows will not let me add it, it says insert the xp disc I don't no one.

  I'm trying to set up my fax machine!  My windows fax component service won't let me add says insert xp disc which I did not and said look these files H:\WXHOEM\i386. Please help me

  Since we don't know anything about your system, I'll give you some instructions which will work for XP Service Pack 3.

  To install the fax of XP with no CD Service, download the version of Service Pack 3 to XPFax.zip since my SkyDrive and extract/unzip the file in a folder on your desktop or somewhere on your system to a folder name, you can remember (there are 35 files in zip archive).

  During the installation of the XP Fax Services and it asks you your installation CD, change the location of the file to point to the folder where the 35 files on your system.  Whenever the installation asks you for a file on your CD, change the location to look in the folder XPFax, until the installation is complete.

  Restart and test.

  Here's how to get the file XPFax.zip from my SkyDrive:

  I downloaded a copy of XP Pro SP3 files you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the file extension (.exe, .dll, .cpl, .sys, .zip etc), but when download you them they will have the right extension (most of the time).

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (such as .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You don't want to use a file called XPFax when the name of the file should really be called XPFax.zip (if the downloaded file has no extension you will need to change the name of the file to add the appropriate extension to run).

• HP Deskjet 3520: 10 Windows will not let me block the update "ghost".

  I am running in the same question as 'has no updates nightly for Hewlett Packard Imaging NULL print HP Photosmart 6520 series' and 'I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop Window 7 error 80070490 o/s", when I run windows updates I get the message

  "He had problems installing the updates, but we will try again later. "If you keep seeing this and you want to perform an Internet search or contact support for further information, this can help: Hewlett-Packard - imagery - print Null - series HP Deskjet 3520 - error 08024200 b ×".

  The solution to both of these post say is to disable the update is not tried to be applied, however, I use Windows 10 and it seems to be an option to ignore an update than previous versions of windows.

  What are 10 Windows users supposed to do when they are run this problem?

  Hello:

  As you know, Windows 10 has made it impossible to hide or ignore updates (or so it seems).

  I found this tool from Microsoft that allows you to hide updates that don't work, or mess up your PC if they work, (as a synaptics touchpad update has done on my laptop).

  https://support.Microsoft.com/en-us/KB/3073930

  I saved this tool on my PC for use in the future if necessary.

• I get the message on the screen, invalid boot.ini.file, booting from C:\windows,can not start window, white screen, need help

  the error on the screen of the invalid boot.ini mpfprojectdir\dev10\src\csharp\projectbase.file come on and outside, white screen, can not re start, the DVD player does not.

  the error on the screen of the invalid boot.ini mpfprojectdir\dev10\src\csharp\projectbase.file come on and outside, white screen, can not re start, the DVD player does not.

  Click on the link below and follow the instructions to create a startup disk best for repair/restoration of Windows CD. A when you're finished, place the disc in the cd rom of the damaged computer and then restart your computer. The computer will automatically boot from the disk. When the menu screen is displayed above and the arrow keys on the keyboard to scroll to ERD Commander, then press ENTER. Allow ERD load. This can take some time. You will be asked to select the operating system to load. If you have only one option will normally be C:\windows. You will also see a screen to configure the network settings. Click Ignore to skip the procedure. RPD will load windows. Once loaded click Start > system tools > repair of system files. Allow the repair. If there is no error detected file click Start > system tools > system restore. Follow the prompts to perform a system restore, selecting the last possible date. Restart the computer without the disc.
  http://www.repairbotsonline.com/tools-and-software-section-F13/best-boot-disk-to-repair-restore-Windows-CD-T192.htm
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• no noise from the window and not able to hear movies net movie

  No sound from the computer, not able to hear flck net movies

  The following link might be worth a visit:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)