Intel Rapid Storage help

Similar Questions

• Intel Rapid Storage on Raid0 error help

  At startup when the screen flashes all the disks on my system, it shows an error on one of the drives in raid0.  When the Win7 finally load the Intel Rapid Storage notification in the hidden icons bar presents a problem.  The Intel Rapid Storage of opening of the status bar shows this:

  

  I always open the videos I saved on the Board of the new media projects and do not understand what means the error message.  As far as I know, it still works.

  Any ideas on that?

  Thanks for your help.

  James

  I had some problem a long time ago, I forget exactly the error and the situation, but I think it was a failing hard drive. Make sure that your backup is current before you do anything else to fix. If there is a problem with the structure of raid, you might be able to rebuild the raid and it works again ok. you could also try to click on the reset to normal disk, or try the check and repair function... If this is the beginning of the problems with this drive, it can continue to cause problems or fail completely one day.

  Here are some manuals from intel and you can look through their forums for similar problems.

  http://download.Intel.com/support/chipsets/IMSM/SB/irst_user_guide.PDF

  http://download.Intel.com/support/motherboards/Server/RAID_vol_recover_proc.PDF

  https://DuckDuckGo.com/?q=RAID+Intel+rapid+storage+solution+error+disk+failed+site%3Acommu nities.intel.com

• Pavilion WA782UA #ABA: need help for the Intel Rapid Storage Technology driver

  Hello

  I have recently reinstalled Windows 7 after putting in a new drive hard 1Terabyte. I then had problems with Windows Update, and just my overall use of my laptop has been slower. After reading on other forums with people who got similar error messages from Windows update told me to update my driver Intel Rapid Storage Technology. (Link forum here)

  However when I visit my list of drivers on the HP site, I find not the Intel RST driver to update. Can someone direct me to the Intel RST driver that corresponds to my laptop?

  Laptop HP Pavilion dv6 - 2173cl

  Hello:

  You must use this version... you want the 3rd file listed on the left.

  https://Downloadcenter.Intel.com/download/23496/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Do not click on the most recent version of the driver is available because it is too recent for the chipset has your PC.

• With the help of the ReadyCache with Intel Rapid Storage Technology?

  I just upgraded to Win8 and the ReadyCached doesn't seem to work.  My motherboard supports the Intels Rapid Storage Technology (RST), so I think to convert thie ReadyCache in an ordinary SSD.  How can I do this?  I just reformat the ReadyCache enable RAID in the BIOS and then hope for the best?

  You can use the drive as a normal SSD all that you need to do is to reformat. no need for RAID really it can work in any RAID or AHCI IDE mode. Technology Intel Rapid storage technology is the SATA driver. Intel RST 11.6 is currently not took with the Expresscache software, but which is supposed to be fixed in the next software update.

• HELP: Intel Rapid Storage Technology WARNING

  I am a user of Alienware M18. In the last two days, I received the following message on the Intel Rapid Storage Technology technology with the message "disk SATA Controller 0, Port 0: failed. (See attached screenshot)

  Should I panic?

  What are the remedies should I take?

  The laptop is a model mid-2013.

  

  I received a response from support Dell and was recommended to do the following:

  1. Please download and install the latest driver of BIOS (A10). See the link below:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=VDR27&FILEID=3401916305&osCode=W864&ProductCode=Alienware-18&LanguageCode=en&CategoryID=bi

  2. Please download and install the latest version of the driver TSRI. See the link below:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=HMX25&FILEID=3198989935&osCode=W864&ProductCode=Alienware-18&LanguageCode=en&CategoryID=SA

  So far, I don't get the warning messages more after doing the above

• Intel Rapid Storage Technology and envy 700-330qe

  I'm a new 700-330qe CTO. Include updates of driver on the hp support is for technology Intel Rapid Storage Technology. I first thought it was a driver of hardware like my former lodge (he had a card Intel Matrix Storage Manager who managed the RAID 0, 1 or 0 + 1).  Now I see that it is a software emulation of RAID. Nowhere in the documentation supplied with the machine is there any mention of the capacity of this machine to run any form of RAID. I have two HARD drives, and they are the same size, so, theoretically, that I could run RAID 0 or 1, if I so wish, but is nowhere mention of a way to do it. I see the BIOS must be configured to run RAID.

  I'm NO expert. I was wondering where I can find more on how to set up a RAID machine. So far, I still didn't look in the BIOS (not even sure how to do this, while some of you think I'm stupid). I guess I get a little twisted shape when a product has features that should be out in the open but seem to be hidden. Any help would be appreciated to reallyhl.

  Hello

  You can use the TSRI for caching, but you must first disable ExpressCache to run.  If you buy a longer MSATA card of 64 GB (128 GB) then the remaining space can serve as a data storage area.

• Replaced the hard drive - now screen Intel Rapid Storage Tech comes first?

  A couple of weeks ago, I replaced the hard drive in my laptop Pavilion dm4-3090se with a 240 GB Samsung SSD (the laptop came with a 500 GB Hybrid HDD which is now my backup).

  Everything works fine, except when I first put it in, I get the screen shown in the image below and it takes a good 5 or 6 seconds before it closes and opens Windows. How can I make this screen go away?

  

  You are running Windows 7 or Windows 8? I see that you still have the installed cache acceleration mSATA 32 gig drive and it has the Intel Rapid Storage, just off acceleration partition. Can you find the control panel Intel Rapid Storage and reformatting the drive to 32 gig Accelerator? It will look something like this:

  

  I suggest also just remove acceleration 32 gig of hard drive. You have really no more. You can not acclerate a SSD and shouldn't do anyway since having a main SSD is still faster than having the accelerator. See page 44 of the Manual:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• No command in Intel Rapid Storage after the reset of a device of available Cache

  There are in my book of 15-4010nr XT the spectrum of the HP TouchSmart Ultrabook 1 HDD and 1 SSD (30 GB).

  The SSD was initially used for acceleration in Intel Rapid Storage.

  But I zero it available in Intel Rapid Storage and now I can not "activate the acceleration' even once, because there is no such a command in the interface of the program - it only shows the disk information in the 'status' and 'Manage', but no orders at all (except Acivate LED). How to help?

  Hi Alice-Wonder,

  Thank you for your request, I will do my best to help!

  I understand that after changing the SSD for available in the Intel Rapid Storage, you are no longer able to activate the acceleration once again, since the command is no longer available. State Manange without any option of the command.

  I suggest you do a restore back before making this change. Using Microsoft System Restore (Windows 8).

  If that did not help, I would do a factory recovery.  Performing a recovery system (Windows 8) HP.

  During the recovery process, you will receive a prompt to back up your data to avoid loss. If you did not recently, I suggest do you it now.

  Restoring files that were supported by using HP Recovery Manager (Windows 8) upward.

  Good luck!

• Intel Rapid Storage Technology technology made disappear from HARD drive

  Recently my laptop stopped windows startup. When I turned it on, Intel Rapid Storage Technology 12.7.0.1936 technology window appeared and said that one of my SSD volume is off and asked me to press CTRL + I to access the Configuration utility. When I pressed on that, I could only select Reset Disks to Non-RAID option. So I chose, but windows still didn't start with a Operation System not found message.

  So I changed the following settings in the BIOS:

  • SATA Operation: AHCI (instead of Intel Smart Response Technology)
  • Technology Intel Quick Start: People with mobility reduced (and not active)
  • List start option: Legacy (instead of UEFI)

  Then I was able to start windows setup from usb. Windows repair did not help, I had The drive where Windows is installed is locked. Unlock the drive and try again. message. So I just temporary installed windows on a SSD (during the installation of my disc drive 500 GB HARD is not visible).

  I even booted ubuntu live USB, and it didn't detect my HARD disk drive.

  My HARD drive is not visible in the BIOS. It shows Fixed HDD: None .

  Plug my laptop:

  • Dell Inspiron 14 7000 series 7437
  • Intel Core i5-4210U CPU @ 1.7 GHz
  • mSata device LITEONIT LMS-32L6M m-(S1) 32GB
  • Windows 8.1

  Someone know any tool or approach how to unlock my RST HARD drive and make it visible again?

  The drive does not have (the first symptoms you describe were your imminent disk failure warning) and must be replaced.

• Issue on Inspiron 5110 15 R and Driver "Intel Rapid Storage Technology."

  In "Windows 8 Upgrade Checklist' of the valleys, Article ID: 575112, they recommend updates to some drivers when migrating to Windows 8.  Especially me confused, it's their registration one driver "Intel Rapid Storage Technology technology." The confusion comes, I can't find any driver with that name on their support site for driver for the Inspiron N5110, either in Win 7 or 8 entries. Do I really need this driver or Windows 8 will provide it. If the latter does not, and it is necessary, where can I find the driver given the fact that it is not in the supported drivers? Thanks again in advance for any help offered...

  According to the FTP site, Windows 8 likely has a driver, because it lists it for XP/V/7, but not 8:

  FTP.Dell.com/.../Inspiron-15R-n5110.html ATA

  Drivers are located under Serial ATA on the Support Site, but again, none are listed for W8, which normally means that it is not necessary.

• Data technology Intel rapid storage that can endanger - Sony Vaio

  Hello

  I have a Sony Vaio and since a week started to get this message.

  Intel rapid storage technology data may be at risk. When I click to reset the player, that he's going back in the error mode again. In addition, initially to the top of the window will be stuck at the Intel page that says (Intel Bios H2o), unless I press space that it doesn't let me log on.

  I formatted the system (recovery) and removed all the data but still get the error. Also my system went very very slow. Is my hard drive is at risk.

  Help, please.

  Concerning

  

  in order to see the BIOS HARD drive / UEFI
  Controller SATA HDD must be defined in

  Native / IDE / compatibility mode

  What ever the BIOS / UEFI appointed him,.

  and then after you test before you start in windows it should be indented the
  SATA / AHCI / RAID setting that windows was originally isntalled on

  Start
  Go to the system BIOS / UEFI with the system specified key
  for example.
  Reference Dell = F2

  and change the HARD disk for compatibility IDE controller before starting the system with Seatools BACK disc.

  SATA AHCI / RAID does not use the same ports as IDE
  and so an operating system is not the native SATA drivers cannot see records or even the controller.

• [COMPLETED] How to configure the Intel Rapid Storage Technology technology?

  My Toshiba laptop U840, that come with 32 GB SSD + HDD 500. It applies to technology Intel Rapid Storage Technology to speed up performance, recently, I try to upgrade my HARD disk by replacing the SSD, I use Norton Ghost clone SSD image, but when I restart the window, it appears Intel Rapid Storage Technology (IRST) config and cannot go to the BIOS at all. (I get all the back to the top and keep the original HDD 500 intact.)  I have no idea on how to set TSRI, but it offers the following options:

  • Create a RAID Volume
  • Deleting a RAID Volume
  • Reset to no RAID disks
  • Recovery Volume options
  • Acceleration options
  • Output

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  RAID volumes:

  ID name band level size State Bootable

  0 SSDSpace RAID0 128 KB normal 11FR Yes

  1 cache_vol RAID0 (Cache) 128 KB 19 off GB No.

  Physical devices

  Type of ID model device size / status (ID theft)

  0 new SSD 480 GB Non RAID disk

  SanDisk SSD 30 GB Cache Disk 1 (0.1)

  Hello

  Thank you for bringing your query on the Microsoft Community Forum!

  I suggest you to post your query on the TechNet forum since they would be the right person to help you with this particular issue.

  https://social.technet.Microsoft.com/forums/en-us/home

• Cannot install the Intel Rapid Storage Technology technology

  Hi all
  I'm having a problem with technology Intel Rapid Storage Technology. I will describe my problem briefly at the outset.
  Here's my problem:
  I have a Dell inspiron 14z 5423 model ultrabook with Windows 7 Home Premium. He was fine, when suddenly the system crashed . Whenever I started it, a blue screen flashes and restarted. I tried everything to keep it. I have googeld for each solution, but could not repair it. Unfortunately, I have expense installing the operating system. And other MISFORTUNE, I only tried to format and delete the C: drive (C: drive was approximately 250 GB and removed to create other partitions of it) but my ENTIRE score got DELETED and MERGED into a single Partition. Fortunately, I managed to recover my data very Important. (End of part 1)

  Now, later, I installed Win 7 Professional.
  Previously, he had installed TSRI and seems to work correctly. Now, I try to install TSRI in my ultrabook but could not do so. Without knowing it, I installed the operating system with the SATA Mode: AHCI instead of Intel Smart... (RAID). Now when I try to change SATA RAID BSOD mode flashes then restarts. I also tried the following technique:
  http://www.overclock.NET/t/1227636/how-to-change-SATA-m... 
  But can't make it work.
  I want to install SORTS on my ultrabook and do not want to reinstall win 7 in RAID mode for this.
  Please help me with this problem.

  Hey Tushar,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Hope this information helps.

• Intel rapid storage / MSATA Question

  I have a HP Envy TouchSmart Ultrabook running windows 8. I had a problem with the fast storage disk intel / chip MSATA since I bought this laptop and I'm quite confused on how to fix. A few months after I first bought this laptop it crashed with a blue screen saying critical process is dead and after he collected the information he stop and came back as not found boot device. I immediately contacted HP and they sent me a USB windows 8 reinstall the kit that I ran and did a clean reinstall of windows 8. After doing this and everything set up on this subject, I closed the laptop for the night and he fell asleep. The awakening of the laptop in the morning, he said the same thing as before, critics of the process died and start the device not found. so, I called HP and expelled for a repair. In my opinion, that they put a new hard drive in it. Soon after getting it again it crashed for the second time, so I contacted HP and after complaining that they told me I could take it apart and try to fix it myself. They said as Caste drive / chip MSATA needed to take and to perform a new installation of windows, then reinstalling the drive of caste / chip MSATA and then install the latest version of the driver intel rapid storage, which I believe has been 12.5 after doing so, it has worked for 5 months I had no problems after I downloaded the new windows 8.1 and it ran for a few months with no problems. One day it froze on me and crashes on startup, I couldn't do a system restore and decided to just do a clean boot of windows 8 and start again because I had already saved my files before that, because my computer didn't have before. After doing a clean reinstall of windows 8, I installed the rapid storage driver intel 12.5 and after put my laptop to sleep he made the same critical process is dead as it did the past so I decided to take the chip reader/MSATA caste of my computer reinstall windows, then reinstall the drive/MSATA of caste and start and install the drive of fast storage intel 12.5 well that does not work after put to sleep it's the same critical process died. So I reinstalled windows 8 AGAIN but this time I was not installed fast storage drivers intel but after you put the laptop to sleep it still crashed with critics of the process is dead and so at this point I took the car of caste / MSATA chip out of the laptop and did a clean install of windows , but I have never reinstalled the MSATA chip, I just completely took it and after having put her to sleep WITHOUT PROBLEM, it didn't crash.

  I guess my question is my cell phone will be ok without the drive of Caste / MSATA chip in it? This seems to be the main reason for my computer crashing and it out makes the computer to run without crashing once he's asleep.

  Or maybe I need to install a new driver for fast storage intel?

  Given that I do not wish to install a rapid storage driver intel going there just to make my computer slower?

  Also I've ever heard call the chip MSATA, a reader of caste not to mention that the people of HP that has helped me the first time so I don't know if it is the correct term, I tried to look through forums, but has not found a solution to this problem any help will be greatly appreciated.

  I will try to update the bios and see if that would help solve the problem. But I think that it is due to a defective material that I removed the card SSD to the computer and it starts correctly.

  I still don't know how the different my laptop will be to not have a SSD inside card.

  It worked fine for a few days without the ssd, but what difference does he have it or not?

• Sony Vaio SVT14113CNS error DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys) [Intel Rapid Storage Technology] on Windows 8 x 64

  March 30, im getting this error on windows start.

  When I start my notebook ' VAIO' logo comes with "Preparation auto repair. After 2-4 seconds 'circular loop treatment' pause for 1 sec & 'Blue screen' comes with

  "Restart your PC on a problem and needs. We are only collecting the error information, and then we'll restart for you"

  error "DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys).

  I know its technology Intel Rapid Storage Technology.

  I had my backup of the C: & D: via Ubuntu live disk installed on USB key on a Portable HARD drive.

  now, I just need to get into recovery mode.

  When I press on "Assist-> recovery & hold ' and then it goes blue screen.

  (1) im thinking to 'Safe Mode' start up. because if it will allow the startup I can uninstall the drivers of Intel rapid storage Tech.

  Please tell how I can do it, because I can browse the live Windows by Ubuntu Pendrive files.

  (2) 2nd is I can also navigate my "recovery Partition", so could you tell me how to use this 'partition data' to something to copy paste for USB...

  My Recovery Partition to a folder 'sources' & also sources---> install.wim (9.05 GB)

  folder 'sources' is total 17.9 GB in size.

  If you (microsoft) can help me with the idea of 1st activation mode without fail to start, then it would be very very useful. Please, I beg you.

  just need to as the bypass to my window troubleshooting-made & then I can start my recovery.

  thnx.

  Hi Christophe,

  As the report makes clear that the Intel rapid driver is the root cause of the
  question, we can try to run restore the system to an earlier point to cancel the update of starting on the recovery Partition.

  You can see the Sony guide learn more about the problems of system recovery:

  http://community.Sony.com/T5/Windows-8/Windows-8-upgrade-Troubleshooting-FAQ/TD-p/41893

  http://Genesis.Sony-Europe.com/InStranet/ccil_sony/selfservice/searcher.jsp?docid=125104&l=en_GB&m=null

  To go in safe mode since the Partition configured recovery on your computer, you can
  Follow the instructions below.

  Once you are on the recovery Partition, you will be asked to press any key to load sound
  content, to do. First, you will need to select your keyboard type. Press the page layout you want to use. If you want to browse the available options, press 'see more keyboard
  layouts' until you find the one you want to use.

  Windows asks you to choose an option. Press help.

  

  In solving problems screen, tap Advanced.

  

  In the Advanced options screen, tap Start parameters.

  

  You are informed that you are about to restart to change several options of Windows, including activation of the Secure Mode. Press restart.

  

  Your computer or your device restarts again and displays nine startup settings, including Safe Mode, Safe Mode with network and Safe Mode with command prompt

  

  Press F4 on your keyboard, to turn on Safe Mode, F5 to activate Safe Mode with network and F6 activate Safe Mode with command prompt. Windows 8 and Windows boot 8.1 now depending on the setting you have selected.

  It will be useful. Please let us know in case you need more information on issues related to Windows.