Intel VT control command lines

Similar Questions

• Add controls from the command line to convert PDF files to excel

  Are there any current control command line to run the PDF to Excel conversion available via acrobat pro XI?

  N °

• Control CMD (command line interface) using Labview 2011.

  Hello

  I'm trying to control software that has an interface to command line using LabView 2011 but I have problems when reading the information.

  Is attached the VI I created so far, but it is not working properly.

  Problems so far:

  1 - if I use ReadLine(), it blocks showing no error and nothing else.

  2 - ReadToEnd () same problem as the previous line, the software hangs just at this stage.

  3 - if I compare the response of the "peek" in waiting for the - 1 indicating there is not more character, the hook of software as the previous steps.

  You have some clues as to what might be wrong or another way to 'control' the CMD to send messages, read and send messages, etc...

  Thank you very much for your help.

  I've done it before - I posted about this on the forum here: https://forums.ni.com/t5/LabVIEW/How-to-open-close-and-monitor-a-application-xyz-exe-using/m-p/32511...

  I did also wrap in a library at a given time and post it on the forums, but I couldn't find this particular post.

• When you run Windows Explorer from a command line under Vista, control or not display the navigation pane

  I'm under Windows Explorer from a command line under Vista and 7. Under XP I could use the /n switch to control or not display the navigation pane. This doesn't seem to work on later operating systems. How is it possible?

  Hello

  How to change Windows Explorer icon to open a folder in Windows XP and Vista Diffierent - this shows the
  command line and that the switch should always work.
  http://www.watchingthenet.com/how-to-change-Windows-Explorer-icon-to-open-a-diffierent-folder-in-Windows-XP-and-Vista.html

  Command line switches to display items or folders when you open Windows Explorer
  http://www.mydigitallife.info/2009/02/07/command-line-switches-to-display-special-objects-or-folders-when-opening-Windows-Explorer/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• What is fledge command-line argument to control the graphics acceleration?

  Is there a command line argument to control the graphics acceleration for a JDE 5.0 Simulator?

  I would like to switch off in the command line so I can add it to the Simulator Run Eclipse IDE and the debug configuration.

  I checked their moult imaginal/Help and I have not found any that I could see that it works.

  Thank you.

  The settings are stored in a file located at

  \Documents and Settings\ [windows login name]\net\rim\fledge-2\fledge-saved.conf

  At the bottom of the appearance of file for the line:

  4
  

  Change the number 0 for no acceleration.

• WS8 - shared control VM command line

  On the linux machine, I have a job of rsync that records everything on an external hard drive. I would like to make, just before the backup, stop the shared 2 VM I have running, save it, and then restart them again. I can't stop the virtual machine with the vmrun command fines. However if I start the virtual machine by using the nogui option I can't control them from the GUI. If I starts them with the option of the GUI, it starts them by running another instance of the workstation, but the VM I start is more shared. It appears in the above list of the shared VM.

  Looks like you can't control shared virtual computer from the command line. However, can someone tell me if it is possible what I want to do?

  Because the shared virtual machines are managed via pass, vmrun will work, but you must use the 'server' type and give host/user/password name.

  vmrun T - server h https://127.0.0.1/sdk u Pei Start '[standard] VM/VM.vmx '.

  You can get the path of the data store (the "[standard]... ") to the tab of the virtual machine summary page.

• Unrecognized command-line control internal/external errors

  First of all, for anyone who believes, it's a problem of environment path. All orders are in the path.

  The problem is that the command line requires the full extension to type to work rather than simply the name of the executable.

  Here is an example:

  Type: ipconfig

  Result: 'is not recognized as a builtin or external, operable programor batch file'

  However,.

  Type: ipconfig.exe

  Result: (all my ip info...)

  For some reason, my computer has gone into requires me to type the full extension. While it is a commonplace Act, I need only continue now because several batch files, I am running the facilities have not always the full .exe and fail to find the 'command '.

  
  What I stupidly changed the absence?

   

  This article explains http://windows.microsoft.com/en-us/windows/fix-corrupted-user-profile#1TC=windows-7 how the data can be moved on the plu account.

  Thank you!

• How to divide the amount of import control program command line

  Hi Experts

  Divide the amount of command-line client 102000 99000 and 3000.

  I used following scripts, but he just updated the quantity on the line, but do not add a new line for the remaining quantity.

  1 INSERT IN oe_headers_iface_all
  (
  order_source_id,
  orig_sys_document_ref,
  org_id,
  ORDER_NUMBER,
  CUSTOMER_PO_NUMBER,
  SOLD_TO_ORG_ID,
  CLIENT_NAME,
  CUSTOMER_NUMBER,
  OPERATION_CODE,
  created_by,
  CREATION_DATE,
  last_updated_by,
  last_update_date,
  CHANGE_SEQUENCE,
  FORCE_APPLY_FLAG
  )
  VALUES)
  0,
  "LT_TEST7,"
  204,
  67081,
  "4500007067-01',
  1290
  "Networks of c. a.",
  '1143 ',
  "UPDATE."
  -1,
  SYSDATE,
  -1,
  SYSDATE,
  1,
  « Y »
  );
  
  2. INSERT IN oe_lines_iface_all
  (
  order_source_id,
  orig_sys_document_ref,
  orig_sys_line_ref,
  orig_sys_shipment_ref,
  org_id,
  ORDERED_QUANTITY,
  ORDER_QUANTITY_UOM,
  PRICING_QUANTITY,
  PRICING_QUANTITY_UOM,
  SOLD_TO_ORG_ID,
  REQUEST_DATE,
  INVENTORY_ITEM,
  created_by,
  CREATION_DATE,
  last_updated_by,
  last_update_date,
  operation_code,
  CHANGE_SEQUENCE,
  CHANGE_REASON
  )
  VALUES)
  0,
  "LT_TEST7,"
  "LT_TESTLINE7,"
  "OE_ORDER_LINES_ALL810289.1,"
  204,
  99000,
  "Ea."
  99000,
  "Ea."
  1290
  AUGUST 13, 2014 '.
  "AS54888,"
  -1,
  SYSDATE,
  -1,
  SYSDATE,
  "UPDATE."
  1,
  'FR '.
  );
  
  3. INSERT IN oe_lines_iface_all
  (
  order_source_id,
  orig_sys_document_ref,
  orig_sys_line_ref,
  orig_sys_shipment_ref,
  org_id,
  ORDERED_QUANTITY,
  ORDER_QUANTITY_UOM,
  PRICING_QUANTITY,
  PRICING_QUANTITY_UOM,
  SOLD_TO_ORG_ID,
  REQUEST_DATE,
  INVENTORY_ITEM,
  created_by,
  CREATION_DATE,
  last_updated_by,
  last_update_date,
  operation_code,
  CHANGE_SEQUENCE,
  SPLIT_FROM_LINE_REF,
  SPLIT_FROM_SHIPMENT_REF,
  CHANGE_REASON
  )
  VALUES)
  0,
  "LT_TEST7,"
  "LT_TESTLINE7,"
  "OE_ORDER_LINES_ALL810289.1,"
  204,
  3000,
  "Ea."
  3000,
  "Ea."
  1416,
  "05 - SEP - 2014."
  "AS54888,"
  -1,
  SYSDATE,
  -1,
  SYSDATE,
  "INSERT."
  1,
  "LT_TESTLINE7,"
  "OE_ORDER_LINES_ALL810289.1,"
  'FR '.
  );

  
  

  Any advice?

  
  

  Christy
  

  Hi all

  The problem was resolved after customer compensation request_id in the header and line, thanks for your help.

  Christy

• Windows of different sizes from command line

  Hello

  I'm running Firefox and - width - height of command line options. The problem I have is that these settings are ignored if a Firefox window is already open. In this case, all of the following windows are open with the size of the first (original) window. It does not matter what I type for width and height. These parameters are used only for the first window, when Firefox is actually started.

  I've mitigated it wrong before with javascript used in web pages to resize the window to the document load event. Now I have to upgrade to the latest version and resizeTo does not work on windows that are not open via window.open.

  What are the options I have to open multiple windows of Firefox with different sizes? They all use the same profile.

  We use a very specific environment, closed and controlled with a web server and not internet access. There was no need for update of Firefox 4. Now, we want to upgrade, but this change in functionality prevents us from the upgrade. Because the computers of our customers are on CentOS 5, we would be upgrading to Firefox 17 which is part of the standard CentOS 5 distribution.

  I wrote a bash script that made a list of the windows, firefox lance made a list once again. It then searches the differences in the lists of before and after opening firefox. In the end, the script uses wmctrl to change the size of the window which were found also recently opened. There is a small chance that some other window might appear while the opening of firefox and it will be be reduced too. However, in our case, this probability is very low and it is not worth.

  Here is the script which takes 3 parameters: width, height, URL.

  #!/bin/bash
  
  diff(){
    awk 'BEGIN{RS=ORS=" "}
         {NR==FNR?a[$0]++:a[$0]--}
         END{for(k in a)if(a[k])print k}' <(echo -n "${!1}") <(echo -n "${!2}")
  }
  
  window_count=$(wmctrl -l | wc -l)
  
  windows=()
  
  wmctrl -l > output
  
  exec 0<output 
  
  while read id type machine name
  
  do
  
    windows=("${windows[@]}" "$id")
  
  done
  
  # width and height in this call are ignored if some other firefox window is already open
  
  /usr/bin/firefox -P profile -width $1 -height $2 -new-window $3 &
  
  new_window_count=$window_count
  
  while [ "$window_count" -eq "$new_window_count" ]
  
  do
  
    #echo waiting...
  
    sleep 1
  
    new_window_count=$(wmctrl -l | wc -l)
  
  done
  
  new_windows=()
  
  wmctrl -l > output
  
  exec 0<output "$id")="" "${differences[@]}"="" $i="" -e="" -i="" -r="" 0,-1,-1,$1,$2="" <="" differences="($(diff" do="" done="" for="" i="" id="" in="" machine="" name="" new_windows="("${new_windows[@]}"" new_windows[@]))="" pre="" read="" type="" while="" windows[@]="" wmctrl="">
  
  done
  
  I had to do some tweaking in the script to fool the HTML editor. Some formatting of text is performed, that is not source friendly. That is why the script might look formatted strangely.
  
  </output>

• Change access to command line network services

  Hello world

  With the help of Server 5 on El Capitan.  I adjust some parameters in the pane of the server. I was limiting the Administration remotely (and screen sharing?) to a specific machine - but made a typo.  The end result has been restricted access to 127.0.0.1 and the incorrect address.  So I can not long remote control administer the machine with the app Server, not with the ARD, and nor can I vnc inside.

  I, however, have ssh access.

  Is it possible to set the IP address associated with the service of the command-line remote administration?

  Thank you

  -Jeff.

  Disable packet filtering:

  sudo pfctl(8) d

  You should be able to connect to remote access. Then restart.

• Device command line find utility for Toshiba Bluetooth Stack

  Hello

  Is there a bluetooth for Toshiba Bluetooth Stack command line utility, which can be used to discover bluetooth devices? Our application needs such a command line utility to enable the detection of using Toshiba Bluetooth Stack bluetooth device.

  We looked at a few line utilities Bluetooth command line tools, which all work fine with Microsoft Bluetooth Stack and control including BluetoothView. However, they did not work with Toshiba Bluetooth Stack.

  We would be very grateful if someone could share experiences or throw us some lights on it.

  Thanks in advance
  Ray

  Hello

  Try to remove the Toshiba Bluetooth stack and to replace by the
  Microsoft Bluetooth Stack.
  Found an interesting document that explains how to:
  http://download.Parrot.com/HTML_Update_Procedure/Replacing_Toshiba_BT_Stack_by_the_Microsoft_BT_Sta ck_EN.pdf

  Then you could try to use the mentioned tools that work with Microsoft Bluetooth Stack

• The command line is no longer present when I connect on Firefox. Have to go through the history and home to see. Can you help me?

  My command line is no longer present when I connect on Firefox. Only the most top line (Firefox, file, editing, etc.). The only way to get to my start page is by going into the history and press Home.

  This has happened

  Each time Firefox opened

  == When I upgraded to the latest version, I think

  * Make sure that you have the Navigation Toolbar and other toolbars visible:  View > Toolbars .
  * If items are missing then see if you can find them in the  View > Toolbars > Customize  window.
  * If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
  * If you do not see that item then click the  Restore Default Set  button in the View > Toolbars > Customize window.
  

  See also back and front toolbar buttons or others are absent and controls, buttons and Toolbars Customize Firefox
  ---
  http://KB.mozillazine.org/Toolbar_customization

• Start an application saved on the command line

  Hello

  first of all that I do not know how I can start my data .exe on the command line, I know that. I need a few more tips.

  My problem is that I start my program and set values in my interface and then I save my interface. You can say that I am creating some options with different parameters (option 1, option 2, option3). Now, I would like to open this option on the command line. So first of all the program begins with option1 when this option is over that option 2 should start (I will also create a handler of signals which gives me a feedback if the option before closing).

  It should be like this:
  Path\Application.exe option1 option2 option3

  But know that I have a problem. When I save my slab (SavePanelState) I can not open such a Panel is saved with the command "LoadPanel". In help, there is also information that you can load only such a panel with the RecallPanelState command, but with this command you only update the interface. Now my question is, how can I savel a panel with its States and call it with the command LoadPanel? Or is the only way to load a group of experts and to recall the values the command of RecallPanelState?

  Best regards

  Unortunately there is no way to directly open a control panel preconfigured with controls other than in their default state. You have already discovered it and I can confirm that this can not be changed. However, if you call LoadPanel and RecallPanelState front showing the Panel, that the user will directly see the Panel custom, which is more or less what you are looking for.

• Analyzer of sequence running from the command line in TestStand 2010

  Hello

  I would like to be able to run and control the stand-alone command line sequence Analyzer.  I can do that in 2014 TS (and it seems that I could patch versions as soon as 2012 TS to give them this ability), as described here: http://digital.ni.com/public.nsf/allkb/B927893F26BFB64A86257ECE006E442D

  However, I work with a large existing codebase in 2010 TS (with no intention to migrate to a newer version, in the foreseeable future).  Is it possible to get the same functionality from command line in the 2010 version of the parser?

  I know that I can open the command line parser, but are the commands, I am interested in: analyze, report, / save, /clearMessagesOnSave, / minimize, / help, / / leave.

  Thank you!

  Thanks Ryan, Jigg,

  Yes, I can run the parser (and opened a project), but basically, I can't run anything.

  I realized what I do by writing a TestStand sequence that calls the parser to sequence through its API (attached).  I can then run TestStand (and call this sequence) from the command line.

• Command line of WinRAR with system Exec.vi

  I'm trying to code a program that will RAR a a folder that contains many subfolders with files in them.  WinRAR allows for codes of the command line to send to the WinRAR control via the command prompt (I have it works well).  What I want to do, is to integrate a vi of this code of command via the command prompt line.  I tried to use the Exec.vi system, but with very little luck.  I put the path for winrar tools to attend this repertoire and I used the string "cmd/c" before my entry so that LabVIEW knows that it is a DOS command.  I get an error message that says "'winrar' is not recognized as internal or external, command an executable program or batch file."  I tried to move the codes of the command line at the entrance standard and even winrar on this entry code as well (this one leaves the "cmd/c" as the command to send), still no dice.  Any suggestions would be most useful.  I can provide my code and a list of codes for WinRAR command line if you need it.  Other zip programs would be another option to take that I am open, as long as it can be controlled in the environment LabVIEW and the compression is the best.

  Thanks in advance!

  A

  smercurio,

  Thank you!  It really worked.  What I had to do to get this working was to modify the command enter exec system vi.

  This is what it looks like:

  ""  "

  Thanks again!  This will save a lot of time for me!

  The great thing here I learned was the removal of the cmd /c for this.

  A