Intellistor family managing a kidney on the Samsung drive constantly backup extern

Similar Questions

• My laptop does not recognize the DVD drive or an external USB DVD drive.

  My laptop does not reconise the integrated DVD or an external USB, DVD player.  But if I set the BIOS to let the laptop for the start of the DVD player and the DVD player worked fine.  He could read the disc.  Once, I deleted the program Nero of the system and I don't know if some Windows file has been corrupted.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ===================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please make all underneath the same if you have done some before as is often
  the set of operations that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device.
  The driver tab - click on update drivers (this will probably do nothing) - then do a RIGHT CLICK
  the reader - UNINSTALL - REBOOT this will refresh the default driver stack. Even
  If the drive appears not to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, might
  having a cable loose or slight corrosion on the contacts (usually for a laptop) and
  other questions.

  Your CD or DVD drive is missing or is not recognized by Windows or
  other programs
  http://support.Microsoft.com/kb/314060

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other
  programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that
  you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the
  Setup Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check
  in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
  Often, clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system
  Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). So it is not unusual for 1 or 2 pieces
  No function while others do so properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? He
  are some registry entries that do not fix the resolution of problems and those who "might".
  be the cause.

  Check with your system manufacturer Maker and possible device for two firmware
  updates and the correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive - sub
  the key of course because there will be other subkeys in these keys. Do not forget to ask specific
  involved as well as the settings key.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a restore
  Point before you change anything whatsoever) - find the DevManView device and then right click it open in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager,
  that displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I need to back up the C drive on my external drive - system and everything. How can I go about it. ?

  I guess my question is, can you backup the whole c drive on an external drive?  I had done it until I installed Windows 8.  I'm guessing that it will allow you to do.  I just did not understand the procedure in force yet.

  Hello

  Good to know that your problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• The hard drive on an external drive without virus imagery etc.

  If I do a system image on an external hard drive before you perform a cleanup of the system, any malware virus etc. will load in the image. In addition, if a third party application is required to make the image, all of the recommendations.

  Hello BrianRobertson,

  If you already have a virus on your system, then it will be reported in an image. Unfortunately, once you have a virus, you have. You must get rid of it before you attempt to create a system image.

  With respect to the third-party imaging software I recommend EaseUS Todo Backup Workstation. This is the application that I use. This particular application is not free, so you'll have to participate with little money. However, EaseUS proceed with a free backup application that you can download here: http://www.easeus.com/disk-copy/ it's called EaseUS Todo Backup free.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Disk management will not read the 2nd internal hard drive more!

  Hello

  I am a user of windows 7 and later than yesterday (2016_Feb_02) managing disks stopped to read the secondary internal hard drive (it was working perfectly well before). Does CPU, a beep when it is turned on or even rebooted and more when it comes to the windows logo, the PC hangs for a good 15 seconds.

  The hard drive was an external hard drive and I removed the cover must be installed on my PC, but it has worked well for more than 5 months so far.

  I would like to reuse the hard disk without losing any data.

  Information on PC:

  Compaq

  RAM 2 GB

  Purchased in 2009

  Details of the hard drive:

  Seagate

  2 TB

  Please let me know if more information is needed.

  Thank you very much.

  Download SeaTools for DOS, burn the ISO file downloaded to a CD (you can use the free ImgBurn) and boot from this CD.

  http://www.Seagate.com/support/downloads/item/SeaTools-DOS-master/

• Vista PC does not recognize the HARD drive?

  Hello

  Windows Vista does not find the Toshiba external HARD disk.

  I find it with Paragon "Backup and restore" and in the control panel - Device Manager - readers

  but the HARD drive is not visible in desktop - computer.

  What can I do?

  Thanks fpr response!

  Hilli

  This external HARD drive is what HARD drive model?
  Do you use it for the first time?

  Have you noticed similar problem using other external USB devices?

• Yoga 2, windows 8: cannot adjust the brightness or connect to external monitor

  I have been using my yoga 2 with an external monitor via micro-hdmi port, but a week ago, it stopped working. The monitor does not recognize laptop. In addition, I can't adjust the brightness of my laptop screen, the keyboard, or in the control panel in windows. I think that this problem started after a windows update, but I'm not entirely sure. Does anyone know a fix? Thank you!

  Dear rustforian

  Welcome to Lenovo forums

  For external monitor, please try another cable and another screen if available or check if the cable and the screen work fine with other devices

  For brightness problem please try to go to under view Device Manager right click on the Intel driver cards and choose Properties
  On the driver tab, click roll back driver, if it is dimmed, try to download and install the driver from the link below

  http://support.Lenovo.com/eg/ar/products/laptops-and-netbooks/Yoga-series/Yoga-2-Pro-Lenovo/download...

  Please let me know what happens

  Thank you

• Try adding an SSD, but now I don't see the hard drive?

  I am trying to add a 256 GB SSD on the 1 TB HDD in my Aspire V3 - 772 G.  I put the SSD in the Bay where the hard drive used to be and swapped the hard drive to the extra Bay.  I have cloned the SSD hard drive and can be started either by when you press F12 to select boot Preferences.  However, when I boot with SSD (as I wish I could), I can see is no longer my hard drive.  When I boot by the 1 TB hard drive, both are visible.

  I tried to load the hard drive in an external enclosure and I am able to see him as he is connected with USB3. When loading in the drive Bay hard ssecondary, Manager of devices does not see my 1 TB hard drive.  Please let me know if you have ideas for what to try next.

  What windows OS is installed and has a value of UEFI BIOS, or legacy?

  Have you tried swapping the slot of SSD and HDD, just to understand if it is a BIOS limitation?

• does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Original title: Pny flash drive problems

  I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Hello

  Do you see these error codes in Device Manager?

  Plug the flash drive and run the Fixit of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also the section below, which might be useful in solving the problems of USB devices.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Replacing the hard drive and Recovery console repair turns into a nightmare of activation

  I took the hard drive of a computer dell laptop is no longer used and put it in my current toshiba laptop (in which the hard drive was dead prior).

  I had my laptop to accept the hard drive by using the recovery console and do a chkdsk with the repair option. After repairs the laptop now wants to be activated.

  So now I use my laptop with a hard drive built to a dell computer. Of course, I uninstalled all the bloatware and replaced all the drivers with the right. the hard drive works fine with my laptop. This isn't the problem.

  My problem is that windows will not activate. It is a genuine copy of windows xp home edition, purchased from dell. I got through all of the activation methods and they tell me that the installation id is invalid. I'm basically a big circle with phone support to web support.

  If my product key is known to be valid for windows xp family when he was on the hard drive in the computer dell laptop, why is it not valid when traded to the computer toshiba laptop and why used someone help me with this problem. I can't be the only one that this has happened?

  as a reminder, swapped a hardrive is no longer in use of the computer, a work computer. has ran chkdsk to fix disk errors, after reboot windows is enabled is no longer and requires activation. Activation Assistant will not accept the installation as id being valid and would call support, when I go to real profit online to activate it also error. How can I activate this well-known work product id? I'm not hacking because he is no longer in use, basically, I am on a windows xp home edition right now and nobody will help me.

  Thanks in advance

  Dan

  The hard drive Dell has a "Dell" OEM of Windows XP version and a "Dell" product key (and might even be locked BIOS) that will not work on your Toshiba.

  As with all versions once installed on a computer/motherboard OEM it cannot be moved to another PC.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Need help to replace a physically C drive on several computer disks. I can't LOOSE the data on the secondary drive.

  I got 2 hard drives, a small disc with XP Pro and a big drive for storage and memory intensive programs. The disc is dead - physically (he's grinding wheels), not because of software problems. I managed to boot from the XP disk and copied as much as possible on an external drive to install on a new hard drive. Externally will not take the backup file. After that I restarted depui the XP disc, my secondary drive is no longer recognized. I copy the contents of the C drive on an external drive. Here are my questions:
  1. can I ghost the info on a new hard drive and skip the installation? Reason I have CS3 on drive F, but it components installed on the C drive (where CS2 was before I upgraded). I do not have my Adobe CS3 here records because it allowed multi, and my records are currently out of State with the other licensee.
  2. If I install the new disk, starting from the old drive with XP disc, can I ghost? (I have a tour customized for several readers) When I started the drive C before - he tried to install on my F drive. I have not installed (I can't lose the files on drive F), and now the computer does not recognize the drive. I bought a Seagate drive and they have great software for installation - so I'd like to ghost it. The XP disk reduced to nothing the new drive hard as he did the F drive?
  and finally, question 3. When the new drive, I get up and running, can I sign out the F drive, plug it back and Windows will see it? CS3 & Quark will still work if I have to do a fresh install?

  1. can I ghost the info on a new hard drive and skip the installation? Reason I have CS3 on drive F, but it components installed on the C drive (where CS2 was before I upgraded). I do not have my Adobe CS3 here records because it allowed multi, and my records are currently out of State with the other licensee.

  2. If I install the new disk, starting from the old drive with XP disc, can I ghost? (I have a tour customized for several readers) When I started the drive C before - he tried to install on my F drive. I have not installed (I can't lose the files on drive F), and now the computer does not recognize the drive. I bought a Seagate drive and they have great software for installation - so I'd like to ghost it. The XP disk reduced to nothing the new drive hard as he did the F drive?
  and finally, question

  3. when the new drive, I get up and running, can I sign out the F drive, plug it back and Windows will see it? CS3 & Quark will still work if I have to do a fresh install?

  Hi jdohugh,

  Thanks for posting. If I read your post correctly your hard drive with your operating system on it died, so you lost your operating system and do not have to reinstall but you try to get down the important data before the reinstall.

  1 Q: can I ghost the info on a new hard drive and skip the installation? Reason I have CS3 on drive F, but it components installed on the C drive (where CS2 was before I upgraded). I do not have my Adobe CS3 here records because it allowed multi, and my records are currently out of State with the other licensee.

  A. Si your drive with your operating system does not work, I do not think you can ghost it and reinstall as the image would not work. With Adobe CS3 disks, you will need to contact Adobe and get them to perform the installation of additional supports. Simply copy the files likely will not work to reisntall the application.

  2. Q. If I install the new disk, starting from the old drive with XP disc, can I ghost? (I have a tour customized for several readers) When I started the drive C before - he tried to install on my F drive. I have not installed (I can't lose the files on drive F), and now the computer does not recognize the drive. I bought a Seagate drive and they have great software for installation - so I'd like to ghost it. The XP disk reduced to nothing the new drive hard as he did the F drive?

  A: as I said in question 1 if your operating system drive does not an image would most likely fail or be corrupt. If read correctly the other part of the question you the system tried to start installation on your f:\ that matches your drive program and now you cannot access the files on it? With the last part of this question, you will need to contact Seagate to see what makes their software, I'm not sure what you're trying to accomplish by using.

  3. Q. When the new drive, I get up and running, can I sign out the F drive, plug it back and Windows will see it? CS3 & Quark will still work if I have to do a fresh install?
       
  A. Si you reconnect an extra drive to XP, the operating system should see it regardless of what it was connected to previously. With regard to your programs, if it is a new operating system you load then Yes, you will need to reinstall these applications on the operating system, and they should work with no problems provided that the drive is working correctly.

  I hope this helps. Let me know if you have any additional questions.
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• To move all the contents of the C drive to the D drive

  I have an ASUS while a desktop computer with a 80 GB C drive and an internal D 2 TB drive. I'd like to go OS (windows 7) on drive C to drive D, since my OS has already taken the most much of the drive C. is possible to do it without reformat and reinstall windows?

  Or could I download windows 10 OS on drive D and then remove 7 out of drive C?

  The tools of the Windows Image to create a backup of the entire drive to an external drive and put the recovery disk.

  Disconnect the old drive and connect the other boot disk recovery and do a restore point to the external drive. If you have ports USB 3, you may need to connect to a USB 2 port to see the image of the system.

  Recovery will create an 80 GB partition to match the source disk to restore, but once completed, you can use disk management to extend the C drive in the empty space on the new drive.

• Installation of XP operating system in model of lab manager... No hard drive detected?

  I am currently trying to obtain a model of machine configuration virtual xp in lab management. I have deploy the model, mount the .iso image file, start the installation, but then installing XP spits a message that there is no hard drive detected on the computer. I checked the properties on the machine, there is obviously a hard drive I put in place. It is in the format of BusLogic SCSI parallel. Is there a specific reason for this installation isn't or doesn't see is not the virtual disk? I have not really found something in the help or documentation which speaks of a specific operating system installation issue. Everything is useful, thanks in advance.

  -va

  To install Windows XP, you must have a driver for the disk controller VMware disc. You can consult this article for download one-

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1000863&sliceId=1&docTypeID=DT_KB_1_1&dialogID=32908933&StateID=0%200%2029476991

  If that one doesn't work, then, you must submit a request for support and ask management to send you the right driver

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• Disk error hard 3F0 - but the hard drive is readable from another computer

  I have a HP pavilion DV7-3060us running Windows 7 home 64-bit

  This morning, he decided to not start and gives me an error 3F0 complain about a missing boot disk.

  I have a disc that is cloned several months ago that I put there and that he can use at the moment.

  I put the 'wrong' drive in an external enclosure and checked that I can see from another computer.

  I tried to run a chkdsk on it that 'fixed' some mistakes, but I still get the error 3F0.

  I would really like to fix broken files which do not allow the system starts.

  Any suggestions on how to do it?

  Thanks in advance (and I will credit good answers)

  I don't know what I'm doing, but take a look at this article

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html