Interactive report conditional forwarding using the link in the column?

Similar Questions

• Interactive report, conditional display of the column binding

  Hello

  We have obligation to disable editing in case this field is 1 (1 = closed).

  Is it possible to disable it on interactive report.

  -case when status = 1 link in the column should be disabled (not visible) in order to prevent future changes on the payroll.

  SELECT payroll_no, status

  OF hr_payroll

  ORDER BY payroll_no DESC;

  I tried the link below, but it does not work in my case.

  http://nerd.NET.au/24-Apex-application-express/report-layout/92-conditionally-show-report-link-column-based-on-value-of-...

  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production

  Request Express 4.2.2.00.11

  
  

  Thank you in advance,

  Best regards, FM

  Status of the INCIDENT WHEN 'ACTIVE' = then

  
  '
  OTHER END null deactivate_employee.

  Of

  EMPLOYEES

  What exactly is the error you get? What HTML is displayed in the HTML source code?

  Just by looking at it, I would say that you need to remove the "/" before the f? p

  Don't forget not this way could cause problems if you start using the checksum, then you might want to look at the use of APEX_UTIL. PREPARE_URL to create your URL.

• Application of interactive report of apEx using the last value of the point

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  
  

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  
  

  Thanks for any help you can offer
  

  S.Bovin wrote:

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  Add the REGISTRATION_YEAR_ITEM to the IR Page elements to submit property. He will submit the current value in session state.

  Why bother with the page element at all? Why users can't create just an IR filter?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  For performance reasons, use bind variable notation when you reference values from session state in SQL queries.

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  Why not? That it will provide you with a safe and supported environment and your users with a much better life.

• Interactive report editable without using the Collection

  Hi Experts,

  I use Oracle Apex 4.2.5

  Is it possible to create an interactive report that can be changed in the same page? If the user edit a field, it must get updated in this table.

  Let me know if this is possible without assistance from the Collections of the Apex

  BR,

  Patrick

  Paul Broughton says:

  Hi Patrick,

  I also agree there is no out of the box solution, I need this for an application and I used elements of the APEX of the APEX_ITEM API

  Here is a very basic example that I have not tested, but you have a question, something like:

  [code]

  Select

  APEX_ITEM. DISPLAY_AND_SAVE (1, empno) as patient_id,

  APEX_ITEM. TEXT (2, ename) as ename

  Of

  EMP;

  [/ code]

  Make sure you use columns of standard report as your column types.

  When you click on submit you'd have a process similar to the following:

  [code]

  Start

  BECAUSE me in 1... APEX_APPLICATION. G_F01. COUNTING LOOP

  Update emp

  set ename = apex_application.g_f02 (i)

  where empno = apex_application.g_f01 (i);

  end loop;

  end;

  [/ code]

  That's assuming you don't need inline editing.  If you do this will require an even more customized solution, but the way above requires no collections.

  Thank you

  Paul

  Hi Paul,.

  I think that IR out-of-box features do not work correctly when you use the APEX_ITEM functions in the query.

  Here's another one you could use APEX 4.2

  Yet another way to create & quot; editable interactive report & quot;

  Kind regards

  Jari

• Interactive reports: how to change the display mode (details, group by, chart, pivot) programmatically?

  Hi guys,.

  is it possible to control the display mode of the interactive reports, i.e. display icon, list, view detail, group by, chart, pivot?

  

  As I understand the current setting is stored as a preference of the user for each user... and again when his connection. A settings of the rules them all (all the stored report parameters).
  
  The display mode switchable using a javascript, the api package apex_ir or via a link?
  
  Thank you
  ~ Dietmar.
  

  Hi Dietmar,

  It is not a supported way to change the display interactive report mode.  With the device connected by Anthony internally, we will consider adding this because part of apex_ir or a link to the future.

  Kind regards

  Christina

• Interactive report - out has changed the value of the column selectlist

  Hello

  I try to use a selectlist in an interactive report. I used "APEX_ITEM. SELECT_LIST' for this. My interactive report request is

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx = > 2,

  p_value = > TEST.

  p_list_values = > ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  I had a "Override" button on the page. I try to get the modified values (for the field "test") and the customer ID selected as a semicolon-separated list just by clicking on the ignore"" button. The process code on submit is

  : P8_TEST_VALUE: = NULL;

  BECAUSE me in 1... APEX_APPLICATION. G_F01. COUNTING LOOP

  : P8_TEST_VALUE: =: P8_TEST_VALUE | « ; » || APEX_APPLICATION. G_F01 (i) | APEX_APPLICATION. G_F02 (i);

  END LOOP;

  But I still get the data value, not the value for column 'test '.

  For example if I'm changing the value of "N" to 'Y' after selecting the checkbox (client code corresponds to "6") and click on 'Ignore' button. I get the value '; 6n 'instead of '; 6Y'. is it possible that I can get the value of seelectlist has changed?.

  Thank you

  JJ

  Your problem is in the values of the selection list. The element is not sent to use in PL/SQL, best way to do it is with jQuery

  try adding this to your report:

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx-online 2

  p_item_id => CUSTOMER_ID,

  p_value => TEST,

  p_list_values => ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  and to add actions to the lick... button or other trigger.

  $x("P8_TEST_VALUE").value ="";

  $("input: checkbox[name='f01']:checked").each(function())

  {var val = $("select [id ='" + $(this) .val () + "']") .val ();}

  $x("P8_TEST_VALUE").value = $x ("P8_TEST_VALUE") .value + $(this) .val () + val + ";". " » ;

  });

  Hope that this post will be useful for you.
  Andrej Grlica

• How to create a report page by using the Web layout editor

  Hi Experts,

  I use wcc11.1.1.7, I need to create the report page by using the Web layout editor, but in this applet (editor), there are only 3 types of link to the page: local page, external page, query, it must be of type of the active report (historical), why I can't see them? y at - it components should I activate this?

  Best regards

  It doesn't have to be in the link on the Page, but in the Page Type.

  See the documentation for http://docs.oracle.com/cd/E28280_01/doc.1111/e26694/e02_weblayout_edit.htm#i1068085 for more details.

• Interactive report - Can customize you the search bar?

  I create a simple interactive report. By default, the search bar is above the report results. Is it possible to add another button in the search bar?
  
  If Yes, can you point me in the market to follow to do this, I searched but have not found anything similar to what I'm trying to do. I want one
  a refresh button on the search bar.
  
  Wes

  Wes,

  If you already have a button that works the way you want, then change according to step 1

  Step 1.
  You create a button named P100_REFRESH , to specify attributes of button id = "P100_REFRESH" (same name as the button yor used), this so that you can easily access this button in javascript.
  I don't know what that your "Refresh" is supposed to do, I guess it is to reload the page. You can do this by calling the builtin function + 'window.location.reload () +. To call this Javascript when the button is clicked, you must change the button action to * "Redirection of URLS" * then enter the target URL * "javascript:window.location.reload()"*. To call any another javscript function button can be made the same. With that, you would have a displayed button somewhere in this region of interactive report of yours.

  Step 2.
  The next step is to move the button in the search bar you wanted.
  I'm going to place the button after the 'Actions' + button for example_
  Now the action button can be found in jQuery (because it has a class of "apexir_ACTION_MENU") using the * $('div.apexir_ACTION_MENU') *
  So to move your button based on it, you can call

  $('div.apexir_ACTION_MENU').append( $('#P100_REFRESH') );
  

  You can put this piece of code in the * "Run when the Page loads" * section of the Properties Page, as she is called when the page loads and move the button to the specified position.

• Cannot left click to advance to the next image in the image windows Viewer. I can move forward using the keyboard

  Cannot left click to advance to the next image in the image windows Viewer. I can move forward using the keyboard

  I have a folder of photos that I opened to see several thumbnails. I can left click on a picture and it will open full screen. Then I left click on this image and the next should show but nothing happens. I can use the keyboard arrows to move to the next photo, but I can't use the mouse. The left click works for everything I use it for. I've used regsvr32 /i shimgvw.dll and he said DllRegisterServer and DllInstall in shimgvw.dll succeeded. This does not solve the problem. This isn't a big deal, it just bugs _ on me because I'm a perfectionist. Thank you for your response and any other help would be appreciated.

  ===============================================
  If you use Windows Picture and Fax Viewer... left click of the photo is
  not supposed to promote the image. (some image viewers work this way
  but not Windows Picture and Fax Viewer)

  Left click on the blue arrows at the bottom of the screen will advance
  photos.

  See arrows in the following photo:
  http://blog.BrotherSoft.com/wp-content/uploads/2008/12/extend_200_image_support_for_windows_picture_01.jpg

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Interactive report conditional change link

  Hello Expert,
  
  What I want to do is, interactive report should show the entire file on the table, but it should not show the link edit against the id of the record if this particular record id is present in table B.
  
  For example: .
  Table A
  
  RECORDID customer balance name address
  Sam 102 200.00
  Matthew 104 150.00
  106 James - 522.00
  
  
  Table B
  
  CREATEDDAT USERID RECORDID
  James 106 24 March 09
  
  In this case, the interactive report should show all three records in table A. However, it should only show the record edit link against RECORDID 102 and 104. I don't want to edit record link against 106 RECORDID.
  
  
  
  SAGAR

  Hello

  Mmmm, I can't get the first job or... so we will pass to the last option... something like:

  select case when nr is null
         then null
         else  '<a href="'
                    || 'f?p=&APP_ID.:10:&SESSION.::&DEBUG.::'
                    || 'P10_DEPTNO:'
                    || dept.deptno
                    || '">'
                    || ''
                    || ''
         end link
  ,      dept.deptno
  ,      dept.dname
  ,      dept.loc
  from dept
  ,    ( select deptno, count(*) nr from emp group by deptno ) emp
  where emp.deptno (+) = dept.deptno    
  

  Change the columns of numbers and link to your own page...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Insert the loop by a report or insertion using a link of the column

  Hello!
  
  I think I have an easy one.
  
  I created a site that lists 'problems' with the curriculum of the University. If a curriculum developer sees something that needs to be updated, they use this site to connect to the 'question' so we have a drop-down list of how the program has changed for the particular course or courses. Some 'problems' cover several courses, if a table has been created to allow the issue to join courses as needed.
  
  The 'Courses' table contains a list of all courses at University
  The 'Issue_Courses' table combines the primary key of the 'question' and the 'course' and creates the association between the questions and the courts.
  
  The users use of page to create the associations has a report called 'add_courses' which can be consulted and filterable so that the user can refine the list of courses they want to see (the list is well into the thousands), and this report contains a column with checkboxes. This page also contains a hidden field containing the primary key of the issue, "p13_Issue_ID."
  
  I would like to create an insert query that takes hold of the primary key of the issue of "p13_issue_ID", she travels around the report, by inserting a new record for each box checked in the report. Any help would be great! Certainly, my sql is pretty week.
  
  Another option that I think would work, if possible, to have a "link in the column" that simply runs the insertion process by entering the primary key for the problem of "p13_issue_ID" and the id of the course of the report. Then, the user could just click on a link 'Add' or something similar on the report, which would go to the insert statement and essentially create this association. Is this possible?
  
  Thanks in advance!
  
  Published by: 846852 on March 23, 2011 15:12
  
  Published by: 846852 on March 23, 2011 15:14

  that should have been this line

  1 IN 1.APEX_APPLICATION. G_f01. COUNTY

  I typed 1 instead of I

  To take

  BECAUSE me IN 1.APEX_APPLICATION. G_f01. COUNTY

• Interactive report with display of the icon to set the page element

  Hi all

  I am currently using Apex 4.2.4, I have an interactive report using icons, each icon has a link to another page but a few I want to set a value in a page hidden in the same page element which is then used as a variable for a classic report.

  I have this work via link href in the icon as f? p ='|| FA.page |': 1 :'|| : app_session |': P10_ID_ITEM :'|| FA.link_name without error.

  My problem is that I wanted to put the value of the element without using a link href that I could handle the clicked icon to change the background color so that the user can have a Visual representation, where it was clicked, then using the value of the page item appears the classic report in another region with a partial refresh.

  Any help is appreciated, thanks.

  Can you provide a detailed explanation of the purpose of this report and the logic used in the report query? What are the rules to control which icons appear in the IR, what icons link to the second report on the page of IR, and icons to link to separate pages?

  For me, the report query seems too complicated and inefficient by returning the data it does, and if another level of data is added to the hierarchy or more data is added to the second level, it fails with:

  ORA-01427: einreihig subquery returns multiple rows

  I'm guessing that the intent is that the IR displays only the icons at the top level of the hierarchy and icons for posting a link to a different page when they have no descendants, or to display the related lines in the secondary report below the IR when they do. I created a new page with the report query modified to a route of tree and keep the upper level lines. It is much more effective than the original query and simplifies the logic necessary for the verification of end-nodes. Instead of generating a URL link (which violates the separation of concerns), the query returns of the discrete values that can be used to implement the HTML link in the Icon View link Custom property:

  with icon_tree as (
        select
            ic.id_icon
          , ic.icon_name
          , ic.link_name
          , nullif(connect_by_isleaf, 1) is_parent
          , level depth
        from
            icons ic
              connect by
                  prior ic.link_name = ic.id_parent
              start with
                  ic.id_parent is null)
  select
      id_icon
    , icon_name
    , link_name
    , apex_util.get_blob_file_src('P10_ICON_IMAGE', id_icon) img_src
    , nvl2(is_parent, '586', link_name) target
    , nvl2(is_parent, 'P586_ID_PARENT', null) parent_item
    , nvl2(is_parent, link_name, null) parent_id
    , :app_id app_id
    , :app_session app_session
    , :debug debug
  from
      icon_tree
  where
      depth = 1
  

  In the interactive report, Use Custom Icon Link is set to Yes, and the custom link is:

  
    
    
  
    #ICON_NAME#
  
  

  Public static ID icons and results are applied to the IR and the regions second report respectively for use as selectors in action dynamics and CSS. The protected value property for the page P586_ID_PARENT element must be set to No for the value can be defined by a dynamic action.

  Dynamic action with several real actions is needed to bind alternatives click behavior to the links on the icons that have descendants (i.e. where the data-parent-id attribute has a value):

  Event: Click

  Selection type: jQuery Selector

  jQuery Selector:.apexir_WORKSHEET_ICONS a:not([data-parent-id=""])

  Real Actions

  Seq: 10

  Action: Delete the class

  Class:selected

  Selection type: jQuery Selector

  jQuery Selector:.apexir_WORKSHEET_ICONS a

  Seq: 20

  Action: Add the class

  Class:selected

  Selection type: trigger element

  Seq: 30

  Action: Set value

  Wait for result: Yes

  Type of value: Expression of JavaScript

  JavaScript expression:$(this.triggeringElement).attr('data-parent-id')

  Selection type: Agenda

  Point: P586_ID_PARENT

  Seq: 40

  Action: Discount

  Selection type: Region

  Region: results

  Seq:50

  Action: Show

  Selection type: Region

  Region: results

  Seq: 60

  Action: Cancel event

  Finally, add a style sheet to the Inline CSS property page. Initially, this hides the secondary report and select the parent clicked icon:

  #results {
    display: none;
  }
  #icons .apexir_WORKSHEET_ICONS a {
    border: 1px solid transparent;
    border-radius: 3px;
    padding: 0.8em 0 0.5em;
  }
    #icons .apexir_WORKSHEET_ICONS a.selected {
      border-color: #6a9cda;
      background-color: #bbd1ec;
      transition: 0.6s;
    }
  

  However, after all it is the question of why you use an interactive report here if you turned off all the features of the IR? A dynamic list with a custom template box seems to be more applicable?

• Interactive report will not save the BLOB column attributes

  I created several interactive reports with the 4.0 and 4.1 which had columns of type BLOB with no problems and the download link worked fine. After 4.2 update, interactive reports get the following error when you click on the download link:
  Not found
  The requested URL /apex/apex_util.get_blob was not found on this server
  
  If I open the edit page of the report, the BLOB downloads very well. When I looked at the report in detail the attributes of the BLOB column, I noticed that the BLOB column attributes had not been met. I tried several times to fill in (name of the Table column name, Primary Key, MIMETYPE, etc), but after applying changes and reopen the attributes page for the blob column, the values, that I entered is not saved.
  For completeness, here is the select statement for the report:
  Select "DESC_ATT_ID."
  "BR_ID,"
  "FILENAME."
  "MIME TYPE"
  DBMS_LOB. GetLength ("DESC_ATTACHMENT") 'DESC_ATTACHMENT '.
  of ' #OWNER # '. " ALTEC_BR_DESC_ATT ".
  WHERE BR_ID =: P3_BR_ID
  
  Also, here is the value for the number/Date of the BLOB column format:
  DOWNLOAD: ALTEC_BR_DESC_ATT:DESC_ATTACHMENT:DESC_ATT_ID
  
  Can someone tell me please in the right direction to get the link to the interactive report work correctly?
  Thank you very much
  Jerry

  Hello
  How about you, you do not format BLOB column, do you it manually like this example here:

  Apex. Oracle.com
  workspace: somefeto
  user: test
  PWD: test
  Application 63066

  in the same workspace, there is Sample File Upload and Download (App ID 10540), and it works very well...

  If not, Pls, reproduce the problem on apex.oracle.com

  Best regards
  Fateh
  ------
  If you believe that my answer is correct or helpful to you pls, then mark the reply as useful or correct

• Data of the interactive report not displaying on the edit form.

  I have an interactive report that contains 3 rows. When I click the button change beside one of these lines, the edit form displays the data in this row.
  But when I click the buttons edit beside the other 2 rows of report, I receive an error message that indicates: "ORA-01403: no data found." Error line could not.
  
  I don't see why this is happening. The pharmacokinetics of the table involved is 'Date of application', so 'Column link' report is sent the value "Request Date" to the P54_Request_Date element in the page of the form.
  No idea why this would work properly for one of the lines report but not for the other 2?
  Obviously, each of the lines report must have a value for the PK, then why the form would not be able to find the same line that displays the report? Is this a problem with the process of "line of" form?
  Thank you.

  Hello:

  I'd know it before. The date format default for your application, as shown in the following debug output is DD-MON-RR
  >
  0.35:... "NLS: decimal separator Set =". »
  0.35:... NLS: Set NLS Group separator = ",".
  0.35:... NLS: Date Format Set = "DD-MON-RR.
  >

  So, it means that the part of time to a date column is never taken into account when matching a date field. You can change the default date of the application format (shared components-> change the attributes of the globalization) and the value is in the format that you specified for the column in the report (DD-MON-yyyy hh24miss). It will then do the ARF in the process of work correctly without the need of the value of the page element that contains the column of the massage table. However, the change may affect other pages in your application that may depend on the date is in the format "DD-MON-rr.
  You can try this workaround.
  Remove the header before process you added for re - format the value PK-item page
  Define a process lower than the RFA process before header with a sequence
  Set after a bidding process with a sequence that is lower than the process of automatic line (DML)
  Use the code below for each new process

  execute immediate 'alter session set nls_date_format=''DD-MON-YYYY HHMISS''';
  

  CITY

  Published by: city has 16 Sep, 2009 17:18
  Correction of errors in the date formats

• Editable interactive report. To change the list column dropdown type filter.

  Hi all, I thought I had posted this, but I can't find my post, so apologies if it turns up to twice more...

  XE SUMMIT 4.2 11.2

  Ive created an editable interactive report... Everything works very well, and I have several Text, LOV and selection list columns...

  However when I now click on a column header to filter, sort etc drop-down list is the same format as the column itself. So if for example, I have a text box, then the drop-down list is also text boxes, if the column is a column LOV, the filter drop-down list is a list of fields LOV. (Im assuming this is correct behavior, because it simply inherits the column parent..)   So, I would change the lists to a list of standard display so that they are in order and can be used...

  I think so? I know I have to do, which is either to substitute the function that generates the dropdown filter... or probably more simply, write a bit of JS/JQuery that modify data for drop-down lists.  Im still to learn, some help would be appreciated...

  I think so. (and please correct me if I'm talkiing... garbage)   I need to find each of the appearance of the DIV with the ID that corresponds to the drop-down list box, and then loop through each entry and change the structure...

  Currently the source for drop-down fields resembles the following (for a text field...). :

  < div id = "apexir_rollover_content" >

  < a href = "javascript:void (false); ">

  < input type = "text" value = "24489" maxlength = size "2000" = "6" name = 'f06' > < / input >

  < /a >

  < a href = "javascript:void (false); ">

  < input type = "text" value = "N1021" maxlength = "2000" size = "6" name = 'f06' > < / input >

  < /a >

  < / div >

  How could I 1) browse each occurrence of div id = "apexir_rollover_content" on my page, so I found out about each other, how would I go through the list and change the line above an input to a standard list item text...? Or is there a simpler way to do it?

  Kind regards

  Richard

  Hello

  Problem was on your process to GET the VALUES of LOV.

  You did not bind the variable values of cursor.

  I created another process for your page that manages LOV BUDGET_CAT

  Kind regards

  Jari