Interactive report - Expression LOV in filter - limit line
When you create a filter in an interactive report, the "Expression" this LOV of valid values in the data, but it seems to max out at something around 1000 lines. Is - this configurable? Can I work for say 2000 or 2500?My users are lost when you create filters without LOVs.
There is a limit on lov to 999 by clicking on the column headers, I guess the same applies for the filter > expression lov
As Jari suggested trying to define a lov custom under column attributes
See this component limits
Tags: Database
Similar Questions
-
Interactive report based on sysdate filter
Hello
I have an interactive report in an APEX 4.0 application. One of the columns in the report is a date field to date in the format "MM/DD/YYYY". I want to install a filter on the report so that the report displays only records where the date is the system date. How can I do? I don't want to install the filter on the side of the query.
Thank you
MachaanMachaan,
You could do this with a filter of lines.
(1) for the execution of your interactive report, go to Actions-> filter
(2) type of filter, select the option 'Row '.
(3) enter an expression such as: TRUNC (E, 'DD') = TRUNC (SYSDATE, 'DD')Obviously, your filter would replace 'E' in the above expression with the right letter for your specific date column.
Joel
-
link to an interactive report AND apply the filter for 2 items.
Hi can you help me out here on how to create a link to an interactive report AND apply the filter for 2 items.
Here is my code
I have a list of table, clicking the selected item should link to interactive report and create the filter. Below the code does not work for a filter. can you help me what to do with 2 filters.
A filter = > works very well
sys. HTP.p ("< ul class =" uChartList"> ');
sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');
sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test :') |) » » >') ;
sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");
sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');
sys. HTP.p ("< /a > '");
sys. HTP.p ("< /li >" ");
Scenario 2:
Two filters = > does not
sys. HTP.p ("< ul class =" uChartList"> ');
sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');
sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test:P00_YYY:001:IRC_YYY:test2 :') |) » » >') ;
sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");
sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');
sys. HTP.p ("< /a > '");
sys. HTP.p ("< /li >" ");
Thanks in advance
actually the syntax wrong values in the syntax of the passes to several elements.
is
f? p = 6000:6004: & APP_SESSION. : NO:6003:MY_ITEM1, MY_ITEM2, MY_ITEM3:1234, 5678
Use above scenario and verification.
Go
-
APEX 5.0 Interactive report (nopadding, how to set the line height)?
APEX 5.0.
Theme: 26. Productivity applications
Interactive report region
Where and how can I global set Dimensions height of the line and policies, etc., lines in interactive report?
I use standard interactive report.Thank you
user555867 wrote:
Please help me in detail.
The best way to get detailed help is to create an example on apex.oracle.com and share credentials of developer comments in the workspace here.
I have:
1 created a (= external CSS style sheet) file with the name 'ir_css_padding.css' local on PC (C:\tmp).
2 added "Shared components"-> 'Static Application files'-> 'Download the file statistics Appl.': 'c:\tmp\ir_css_padding.css '.
3. under "attributes of User Interface:
(General properties)
The value 'Statistics file prefix': ' #APP_IMAGES #ir_css_padding.css.
'Media Type' value: text/css
Why have you changed these settings? They are not relevant to the addition of static CSS files in the repository database. Read the help on line for these properties:
Static file prefix
Determines the virtual path of the Web server uses to point to static files when you use the #APP_IMAGES substitution string #.
Do not specify what to do refers to files that are stored with your application definition in the database.
For performance reasons, you can also store your application files on your Web server. Use a valid URL to refer to them.
Media type
Enter the Internet media type. An Internet media type is identifier into two parts for the formats of files on the Internet. A media type is composed of at least two parts: a type and a subtype and one or more optional parameters. This type of media used in the HTTP Content-Type header when the page is rendered.
If both the values of page-level and the level of the application for the media Type are NULL, text/html is used.
Two of these parameters must be null in your current environment.
(The User Interface definition)
"CSS File URL' value: 'text/css/ir_css_padding.css '.
This parameter must use the static text of APP_IMAGES substitution string:
&APP_IMAGES.ir_css_padding.css
After that, I can't jerome in application. (See the only CSS text in the browser)
--> WHAT IS THE PROBLEM?
APEX is serving pages using the type of text/css media according to the incorrect media Type parameter described above. Remove and the app will return to normal.
4. WHERE and HOW VALUE / reference the CSS file?
I need this change for all interactive reports in my application, self think I can change my model that I use: 'interactive report Region '.
Interactive report region isn't just a region container designed for use with interactive reports. It does not control the appearance of the interactive reports somehow. Not there at - it a report model for interactive reports. Their appearance can be changed using CSS.
-
Link to an interactive report AND apply a filter
Hi all
I want to create a link to an interactive report in another report. I would like to have the IR filtered by identifier which is the link in the first report?
Possible?Hello
Interactive report supports dynamic filters. This is the condition of filter that can be applied dynamically
IREQ_
Equals (this is the default) same as IR_ LT_ Less than IRLTE_ Less than or equal to IRGT_ Greater Than IRGTE_ Greater than or equal to IRLIKE_ SQL Like operator IRN_ Null IRNN_ Not Null IRC_ Contains IRNC_ Not Contains Also RIR can be used to creset all the previously applied filter. e.g f?p=&APP_ID.:&PAGE_ID.:&SESSION.:::RIR:IR_EMPNO:7369 will filter the report on given page with employee number = 7369 Thank you
Manish -
The interactive report want to remove filter to sort
Hai,
IM using interactive report, because we used the option to sort and filter, but wat happens is, to sort itself there is a concept more filter that is time that our customer does not want to consume, how can we remove this filter that is inside the so.
DavidHi David,
Put the following text in the header HTML Setup page of instead:
<style type="text/css"> #apexir_rollover #apexir_search {display:none!important} </style>
This will remove the search box on all lists drop-down column but not the main search box. There seems not to be a way to css to hide the individual search fields, as the feature uses the same DIV object for all columns.
Andy
-
Interactive report - calculation of Date filter color highlight SYSDATE
I have APEX 4.1.0.00.32. Report front right, with a field of date when the element was added. I want to create a filter to highlight (highlights of color) for items added in the last week, called items again
When I create the filter, it allows me to specify the name, color, etc., but the condition of point date culminating of the "Added_Item >" does not provide a specific date selected in the calendar, whereas I want him ' Added_Item > sysdate-7 ' "»
I have no luck with TO_CHAR / TO_DATE functions around the sysdate-7. The filter simply indicates that date YYYY - MON - DD HH24 is the expected format.
date functions not authorized? an alternative?
Published by: Alan10205659 on March 1, 2012 14:21
Published by: Alan10205659 on March 1, 2012 14:22Hello
This calculation takes place in IR itself. Click on the action button in IR then Format and calculation
Best regards, Tony
-
Access to a report using a custom interactive report template
Greetings:
I've created an interactive report with a link to a column that is supposed to have access to another report on another pop up page that is based on a custom template. The problem is, when you create the link, I select 'Page in the present application' means the page number of the report, but when I try to pick a name, any name point wouldn't come to the lov from the report that I am tying. What I'm missing here?
The two reports have access to the same table. The interactive report is your standard of several line, while the other custom template report shows only one line, in a format of Memo style.
Thank you
Stan
Published by: bondurs on February 25, 2009 13:48Hey Stan,
your report popup page contains page elements? Because you can set page elements in a report link. In your SQL report, you use the page element in the WHERE clause to limit the output to the selected value.
Hope that helps
Patrick -
Interactive report and branch back JS error
I get errors in applications where I combine search engine with interactive report.
Search form, I got hit research and management in the definition of application when this button is clicked.
After that, I show area with interactive report (condition is "request = Expression 1"), but after that I'm getting various JavaScript errors when I start using report functions.
One of them is:
I get this error when start using the interactive report features (Select column, filter, download,...).
I tested in all browsers (IE, Chrome, Firefox).
I created a sample application:
Test of IReport
http://Apex.Oracle.com/pls/Apex/f?p=23423423:1
Workspace = carine
User name = [email protected]
Password = carine
The problem is with the type of condition on the report. You sense that she only show when the query is set to "Search FOR", but this causes calls ajax to failure - where the javascript errors. It's a little a thorny problem honestly. It's probably because ajax calls do not have this defined demand value (they probably their own value request to work, more a request value is not persistent in any case) that they simply can't.
To work around that, I copied the page to page 5 and used instead something to test in condition. Then knit popups and you don't get more of these javascript errors.
-
Interactive report: How can I display carriage returns?
Hello everyone.
Here's my problem: I created a table that contains a field COMMENT varchar2 (4000) and using APEX 4.1 I built an interactive report on it.
Users can fill the COMMENT field with phrases on different lines, ex:
"It is the first line.
This is the second line
It comes to the third line.
This is handled correctly in the FORM, where I set the COMMENT as "Text area", but in the REPORT field, I wasn't able to put it in a way that allows to see whit transport returns: content is displayed on a single line only: "it's the first linethis is the second linethis is the third line.
I tried and put all the possible field types, but I didn't find any ways to display the content exactly as it is (with some carriage returns).
Of course, I can't use HTML
Since I can't ask users to numbers it when their text is inserted.
Could anyone suggest me how to get to this result? Need to use the interactive report because the search/filter tool is essential.
Thanks in advance,
Danieleuser9211286 wrote:
HelloI tried your suggestion apply to all the report (I have 3 areas to be managed in the same way). I tested it by changing the color, just to prove it works fine:
It works very well!
If I type the following, on the contrary, it does not work: business as usual (I use IE - 7). Should I do something more?
What theme are you using? IE7 does not support attribute selectors in older themes in quirks mode.
In any case, suggests to apply it to all fields: what is the correct command to force the APEX to show the contents of a field accordingly to the transport of text returns? in your example, you wrote "white-space: pre' but I think that this is not my case."
Why not?
http://reference.SitePoint.com/CSS/white-space
You will see that the parameters of the line before or an envelope pre better match your needs. It depends on the content of your text, and how you want it to display.
-
Send the implicit parameter to interactive report
Hello developers,
I have a how to question: I automatically want the value of a parameter implicit to interactive reports, for example, a filter column equal with values and view records on this basis. Also for reports display buttons, I need to display the only detail view option, without showing the search bar.
If you know of examples, I apreciate if you let me know.
Thank you.Hello
You like to 'manage' the layout of the page, I suggest you actually my third solution - custom report template - as this allows available the page exactly as you wish.
That's what I did on this page: http://apex.oracle.com/pls/otn/f?p=267:230
The SQL code of this report is:
SELECT EMPNO, ENAME, HIREDATE, DEPTNO, JOB, MGR, SAL, COMM FROM EMP ORDER BY UPPER(ENAME)
Note that there are 8 columns.
Then, I went the components shared, models and you click Create. I made the following adjustments/selections:
Model type: report
Create the model: from scratch
Model name: used alone
Template class: Custom 1
Model type: named column (model line)That sets up a basic model. When it was created, scroll down to the new model in the list and click the name to edit it. Now, enter the following code in the settings:
Fourth parameter model 1:
<tr><td colspan="2" style="font-weight:bold; background-color:lightblue;">Personal Information:</td></tr> <tr><td><b>Employee Number:</b></td><td>#1#</td></tr> <tr><td><b>Name:</b></td><td>#2#</td></tr> <tr><td><b>Hired on:</b></td><td>#3#</td></tr> <tr><td colspan="2" style="font-weight:bold; background-color:lightblue;">Department Information:</td></tr> <tr><td><b>Department:</b></td><td>#4#</td></tr> <tr><td><b>Role:</b></td><td>#5#</td></tr> <tr><td><b>Manager:</b></td><td>#6#</td></tr> <tr><td colspan="2" style="font-weight:bold; background-color:lightblue;"><b>Salary Information:</b></td></tr> <tr><td><b>Basic Salary:</b></td><td>#7#</td></tr> <tr><td><b>Commission:</b></td><td>#8#</td></tr>
Setting lines before:
<table> <col style="width:250px;"> <col style="width:250px;">
After adjustment of ranks:
<tr><td colspan="2">#PAGINATION#</td></tr> </table>
Next Page template parameter:
<a href="#LINK#" class="t18pagination">#PAGINATION_NEXT# ></a>
Previous Page template parameter:
<a href="#LINK#" class="t18pagination">< #PAGINATION_PREVIOUS#</a>
Following the Template value setting:
<a href="#LINK#" class="t18pagination">#PAGINATION_NEXT_SET# >></a>
Previous value Template setting:
<a href="#LINK#" class="t18pagination"><< #PAGINATION_PREVIOUS_SET#</a>
Note that under the line model 1, I used #1 #, 2 # #, 3 # etc. They focus on the numbers in the column in the SQL statement - I have 8 columns, so used #1 # to #8 # position where I want the values to be. Everything in the scene is available the report - you can use what is layout you like. The only requirement is that the #PAGINATION # in the middle of the lines should be in a table.
Now update your report in order to use the new model and to set the number of rows to 1 so that you see only one record at a time
Andy
-
An interactive report partial Page Refresh
Hello
I use apex 4.0.1 and I have a page with an interactive report that displays different data to the user. The user can change the data by clicking on a column that uses a href link to open a page of DML in a modal window. The user can then modify some data in the modal window, tap on save that closes the modal window and uses the process of partial page refresh to refresh the report. (With the help of apex.event.trigger('#SOME_REGION'), 'apexrefresh')).
If I navigate through the interactive report to show lines 31 to 45 and then click a href to edit a record. Pressing save, the interactive report is updated, but the displayed lines goes back to 1-15.
How can I get the interactive report for stay showing lines 31 to 45?
See you soon
Paul.Hello
You can try to use the undocumented feature
gReport.pull();
Kind regards
Jari -
By the way 'IS NULL' interactive report via URL
I am currently able to pass values of an interactive report via the url filter, but how do I send a filter 'IS NULL' through the url?
My current url is: f? p = 200:7:3244844391991414:NO:RIR:IR_PID:123
Now, I want to add IR_BOOKED_DATE to the url and display only on the interactive report null values.
I'm using version 3.2 of APEX
Thank you!
JonathanHello
Take a look on: http://www.evernote.com/pub/sstryker58/Stews_Apex_tips#n=b5abf5b7-3ff8-48c2-8e60-a5038c14e0d5
Replace IR_name to IRNN_name to set the 'name' is NOT NULL
Andy
-
Parameter selection of interactive report list
I have an optional parameter select list on my page of interactive reports for users to filter. When the user opens the page I want to all the output of show, but if they type something into the selection list I want to use this filter in my query and re-display the page. I created a selection list with submit ("P237_STUDENT_LIST") and by default the value of 'NONE '. I created a list of values and in clauses 'NONE' so it still shows upwards in the list.
I put this in my report query:
and (: P237_STUDENT_LIST = 'NONE' or)
EXISTS (select ")
I seem to have a problem with the session state from the element. When the page appears first, the session state for P237_STUDENT_LIST is empty and shows nothing. When I make a choice in the selection list, session state is ok, but if I go back to 'NONE', it is not reset it. I'm missing something or that the wrong way?Bob,
The ApEx team believes people can do what you do and do an easier way. Put your selection list to select a standard. Then enter the details of the interactive report and scroll to advanced attributes > items to submit Page. Enter the name of the element there.
Kind regards
Danhttp://danielmcghan.us
http://sourceforge.NET/projects/tapigen -
Link to the interactive report with comma
Hello
Anyone know how to create a link that will go to an interactive report and add a filter when the filter value contains a comma?
The URL I have looks like this...
f? p = & APP_ID.:40: & APP_SESSION.:CIR:IREQ_Name:Guy, some:
The problem is considers the value past the comma is for another article. I tried %2C with no luck.
Kind regards
Dan
http://danielmcghan.us
http://sourceforge.NET/projects/tapigenWith javaScript, you need to escape the backslashes. Put two slashes return each place that you are currently using one.
Scott
Maybe you are looking for
-
Windows 7, Firefox 17.0 Solved! Thanks Tyler
-
About this Mac disk storage error
My storage said I have 21GB in movies and I looked up and down and emptied everything (after saving) I could and he said that? Can someone show me the ways of the force to solve this problem please? Thank you and blessings, Dave Yaeck
-
Rights of the Instsllation on an iMac
How can I switch from 3.6 on an iMac when Firefox refuses to proceed with an installation for the reason that I don't have the necessary user rights (even if I am logged on as administrator)? This has happened Don't know how many times == I tried to
-
HP Pavillion DV6: Updaing for Windows 10 knocks out audio Beats
Upgrade to Windows 10 and said goodbye to my audio. (souds like mutilated) Had to reinstall widows 7 and all is well again. How can I upgrade to Windows 10 and work around this audio problem?
-
Re: after wireless driver update without connection
After the update of wireless (realtek_wlan_win7_20100427.zip) driver, my connection is lost. On the previous reset and it works again. Update after Tempro message. The first download will not settle! The second installed OK. After reboot, the problem