Intereaction of Asic with Nand memory
Hi all
I'm new to this forum. I will start my display by basic heading. Interation of ASIC with nand. I'm working e.mmc device Hi has a knowledge base on this subject. How can I get more information about it. How to create a topic in this form. Please help me someone.
Some words are misspelled, I think that it is adding. Can you please rephrase? Sorry, but I don't understand the question, a few fragments.
Tags: SanDisk Sansa
Similar Questions
-
Satellite L500 - 1 9 - GPU with more memory
I would like to ask if this model can take a video card with more memory or if this card can take more big memory
«ATI Mobility Radeon HD 4500 Series (Microsoft Corporation - WDDM v1.1) "»
Thank you.Hello
The laptop was equipped with an ATI Mobility Radeon HD 4570 that supports 512 VRAM (it is fixed and cannot be extended) and the Hyper memory technology.
Technology memory Hyper can be up to 1 791 MB with 3 GB of RAM and 32-bit Windows System.
Using 64-bit Windows and 6 GB of RAM memory Hyper technology can be extended to 3 323 MBHope this info helps a bit
-
Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 have a 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers
You can put 2 x 4 GB DIMMS in the empty slots, this will give you a total of 12 GB. iMacs are very sensitive to the RAM, it is best to buy RAM from reliable sources like Crucial (direct purchase) or OWC OWC RAM
-
Need help with upgrade memory on the Satellite A100-250
Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 MB.
I want to buy an another slat memory ddr2-533 512 MB, what model exactly I needed to research, they were working in a pair.
Sorry for the bad English. From Russia with Love.
PS. I like to drink Russian vodka :)Hay
Your laptop can be upgraded up to 2 GB and compatible RAM is DDR2 400/533 1 GB (PA3411U-1M1G).
Use this part number in Google and you will find it.
Bye and don t drink too much Vodka. ;)
-
Mac pro with flash memory retina display
Will be the installation of e-learnibg suit in screen retina macpro with flash memory?
Well, a computer is a computer. Applications are concerned, that the operating system affecting the resources is important. So yes, it will install if the system meets the specifications ltech al otherwise.
Mylenium
-
Kernal_task with virtual memory, slow computer
I have an iMac 21.5 inch end 2013 with 8 GB RAM on OS X 10.11.6. The computer is incredibly slow and hangs up during long periods of time (minutes). In addition, I noticed when you save to my Time Capsule (ethernet connection, wifi is turned off) it will just make a break to half way through and stay there (e.g., 789 MB 450MO) for 30-45 min. activity monitor shows kernal_task taking up huge amounts of time processor (5:02:09), son (118), slow down wake ups (2752), and when I select the process name it shows the size of real but 781,2 MB of memory the size of the virtual memory of 70,51 Go.
I don't have any external monitors, hard drives (except the time capsule), etc. connected. Any ideas of what I can do?
Thank you!
Please after the release of EtreCheck
<https://discussions.apple.com/docs/DOC-6174> or <http://etrecheck.com>
-
I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?
All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.
To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.
-
Satellite 1900-303: problems with expanded memory
Hello.
I just bought a PC2100 DDR - RAM 512 MB (my type of notebook memory) chip to upgrade my memory for laptop. I now have 768 MB. Manufacturer of the chip is Kingston, one of the best manufacturers as I've heard. But now, I get some problems. The system "crashes", my definition of the display remains 640 x 480 with 8-bit color and I got an error message saying that there is a problem with the driver ati2dvag.dll.
I reinstalled windows, with my restore CD, but the problem remains.
Any idea on this?Hey there,
Could you please download the driver for display on the site and also could you please update the bios as well
See you soon
-
Satellite 1800-100 won't start with new memory
My satellite s1800-100 won't start although my new memory (2nd) module is 128 MB PC100.
I have Samsung samsung K4S281632C-TC1H module as PC100 (128 MB) memory on SLOT 1 by default.
Although all of the features and form factors are clean, why not my Satellite S1800-100 starts? I checked the new (slot 2) memory works fine and tested OK.
So, is there as a possibility to have a problem in the 2 Slot? Or is associated with failure of the BIOS? (there is no more recent BIOS, current is 2.20 for Satellite S1800-100).
I am disappointed. I bought a new 128 MB PC100, to insert it in the slot 2, my Toshiba didn't boou up!.
Important note: if I connect the new memory I bought yesterday, works very well in Slot 1.
Please help and understanding.
Kind regards...
Hello
Well, it very difficult to say why it won't start.
I think that there are several possibilities:(1.) you used a bad module
(2.) the second Bank of the Board of Directors has a malfunction
(3.) the laptop does not support max 256 MB of RAMI think that point 1 and 3 is not relevant because you have tested the module and it worked on the first location. Additional the laptop should be able to handle 2 x 256 MB memory, so you should be able to use 2 x 128 MB
I think that the second ram location may have a malfunction.
Please check the second slot with a module of memory.The second possibility is to use exactly the module which is recommended by Toshiba.
As I remember it s PC100 128 MB (PA3005U) SDRAM -
Do not see a difference with more memory...
Hey all,.
I upgraded to 16gig 8gig and don't see any difference in render time or anything either.
Is it possible to see if the memory makes a difference?
Thank you
AlActivity monitor in the utilities operating system. Additional RAM won't really increase rendering speed. You may see improvement if you are working with still images in a large format or with titles 3D project. 16 GB is a good number. It gives you a lot of flexibility, especially if you need to switch between multiple applications such as compressor or Motion or affinity Photo Pixelmator. According to the effects that you treat the real difference in speed will show in improving the GPU and increasing VRAM.
-
Windows 2008 R2 64 bit servers with UAG memory leak
We organize two Windows 2008 R2 64 bit with UAG servers. We note that, during 10-14 days memory begins to run upstairs and users no longer able to connect to OWA through UAG. We found KB971265 which talks about the memory leak known issues and provides a fix for Vista. However, we do not find a similar fix for Windows 2008 R2 64 bit. Does anyone have a suggestion?
Hello JimBrighter,
Thanks for visiting the site of the community responses to Microsoft Windows. The question you posted corresponds to the Windows 2008 R2 servers and would be better suited to the TechNet ITPRO community.Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threadsThey will be able to solve your problem.Sincerely,
Marilyn
-
cluster with images: memory increases up to more than 2 GB and crashes
I have a lot of PNG images (around 1200, 12 MB in size) and I load by programming in labview with a loop for I put all the image data in a table for all images.
I can't complete this operation, while the images are very small memory LV is increasing more than 2 GB and then I get a memory error output.
I put one "structure" above all table operations. What is going on? IM really a bad thing, I guess.
Hi, Faust,.
"On the qualities of the picture, they are 32-bit and x 850 360 pixels BUT about 99% is transparant (images has a constant size which is transparant, there is a small object that moves in this space)."
Transparency is not relevant in terms of memory occupation. When the image loads, it just needs 850 * 360 * 4 bytes (or ~1.2 MB)...
Suggestion:
-Do not store images in memory... Do the math in slices of (say) 100 photos.
-Do some manipulation of the image to get the position of the moving object. Then you store only a small portion of the image (with the object) and some information about the location in the picture. In this way, you always know the size of the (original) photo, but you only keep the "interesting" part in memory!
-
Printers with nonvolatile memory
I work in a hospital where we have several models of HP printers. For the purposes of compliance with the confidentiality of private medical information, I need to know if one of the following HP printers have a non-volatile memory:
LaserJet 3015 Laserjet 3380, Officejet Pro K5400, Laserjet 2430tn and Business Inkjet 1200. Where can I find this info?
Hey,.
You should be well on these models, as none of them mentioned in the specifications of the product they had a bench of memory HARD drive style.
Good luck.
-
Computer Vista becomes errors with physical memory dump blue screen and restart
I have a problem with my computer going to a blue screen, dump physical memory saying and a lot of other things, then by restarting. It grows more and more frequent.
Please help and thank youYou have several errors:
LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.
PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.
Control bug IRQL_NOT_LESS_OR_EQUAL 0x0000000A value a. This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.
One of the mistakes led to the crash by aswsp.sys. The rest of modules of windows so other thing he led to the crash. So its best to start with aswsp.sys. This file is part of your avast antivirus software. I would download the latest avast antivirus. Uninstall the version you have and install the latest version. I'd also that you have the latest windows updates and patches. Once you've done that I could monitor and see if you have more blue screens.
-
Upgrade a Dell Inspiron 531 to something with more memory and faster?
Hello, I have a Dell Inspiron 531, 32-bit operating system, and the 3G memory in it but is Vista. I tried to upgrade to Windows 7, but after many attempts, could not go without having to clear everything and start over. So I'd do it if I have to do I was wondering if I could make the machine that is more memory better and faster, without having to buy a new computer say a Dell XPS 8300 (that I'll have to run a lot of photographic software in the future and I understand that this could be a good computer for that?) In any case, it is possible to 'upgrade' the computer something like this please, or I have to save my pennies for a new? Thank in advance for your advice.)
Hello
If you upgraded to 4GBs off RAM you won't get many benefits
Here is an article on what is happening with 4GBs of RAM:
http://support.Microsoft.com/kb/929605
"If a computer has many features implemented, the available memory can be reduced to 3 GB or less." However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB. »
and you should also consult the Dell manual for your model desktop computer see what amount of RAM your motherboard would answer anyway
and here is the reason why you can not upgrade to Windows 7
There are no Windows 7 drivers written for her by Dell
Click on the menu at the link above drop-down operating system
itonlt has XP and Vista drivers available
Maybe you are looking for
-
Sound with Equium A200 problems
My sound is really slow and cracky after I had my computer for 30 minutes, the sound is crystal clear from the start, but after 30 minutes, it becomes really bad and noisy. Is not a question if I have a headset or speakers speaker och internal, seeps
-
How interface bronkhorst RS232 communication flowmeter in DIAdem DAC?
Hello I am Thiyagi.I am working in WABCO INDIA Ltd. I bought Bronkhorst Flowmeter. I use the tiara DAC Professional version. I want the meter to DIAdem.Flowmeter of the interface have a RS232 communication. In my pc, I have a COM1 port. DIAdem DAC wh
-
Why does my scan of source memory run twice? * Keithley 2400 * SCPI *.
The purpose of my VI is to perform a scan of the voltage across 6 distinct features of solar cells both in the dark State and with a light on. To do this, I'm first loading this scan on the Keithley 2400 and saving in the memory slot 1. (Please ignor
-
How come the 'remember my credentials"setting does never work at all?
My case is similar to the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/how-come-the-remember-my-credentials-setting-never/dbe32c4e-5675-4389-a509-f878d595370f. But in my case the setting works with no respect for r
-
All my pictures have disappeared? I work on a lot that I had downloaded, and then I selected, then went to create a new collection and baptized DH slideshow 2015, then press return and now it is gone! Help, please!