Computer Vista becomes errors with physical memory dump blue screen and restart

Similar Questions

• Windows 7 x 64 - physical memory dump blue screen

  I got the blue screen a few times now. It seems that the physical memory dump blue screen starts to appear after the last window update.
  Could someone help me please understand this?
  I have attached a link to the dmp files.
  https://SkyDrive.live.com/redir?RESID=FF2F42C35A4D3A3D! 141 & authkey =! AJvPvE7o7Z3rUmI
  Windows error:
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 4105
  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA800A734F60
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\041513-11824-01.dmp
  C:\Users\Yonsu_Kim\AppData\Local\Temp\WER-21060-0.SysData.XML
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt
  Thank you.
  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.

  
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• HP computer shows a blue screen and restarts.

  * Original title: Puzzle blue screen

  I tried to help a friend trouble shoot a problem. Its a HP computer, displays a blue screen and restarts. We are unable to read the message. I went through the newspaper and cannot determine the cause error. I have several possible solutions thanks to this forum, but I'd like to have someone looking at the landfill to see if I'm on the right track. It seems to me that it could be a power supply problem.

  Here is the link on Onedrive for minidump files that I found.

  Thank you.

  WPD50

  No puzzle here.  Symantec is killing netio.sys.  It should be removed and replaced by MSE

  Symantec is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Tecra S1, cannot stop / memory dump blue screen physical

  Hi all

  I really have a serous problem with my laptop TOSHIBA Tecra S1 series.

  I can NOT stop, she gives discharge and it restarts (bule screen) memory physics.
  Whenever I restart, it gives discharge and it restarts (bule screen) memory physics.

  In both cases when windows start it give the message that:

  Your system has been recovering from a mistake of the serosaand it give more details

  If you need a snapshot, please send me email.

  The system that I use:
  Windows XP - SP2 Professional

  This problem came once I installed the software my company's VPN .
  I tried this software in the laptop TOSHIBA TWO and he gets this problem, I also tried to install the software on other systems and the two systems are very good and they work properly.

  Can someone help me, this problem is really annoying me. If you need the VPN software my company gave me please send an email and I'll send it to you.

  My email: [email protected]
  [email protected]
  [email protected]

  I really appreciate your quick answer to the problem.

  Thank you
  AR

  [Edited by: admin]

  Hello

  Is what VPN Client this?

  It seems that the OEM operating system do not like the VPN Client. The problem could be that Toshiba has designed its restoration in a small way differently OEM CD or some utilities occure the problem because each 'designated' its own Windows OEM manufacturer.

  There are built-in drivers, tools and software. But normally the Toshiba and the other manufacturers don't change something in the operating system. So I think that there is a software problem.

  In my opinion, I want to uninstall programs in different turn that may occure the problem.

  Chris

• Everytime I turn on my Nvidia 3d vision in a game windows 7 hangs with a memory manager blue screen.

  I have all the drivers up to date. 3d vision works very well when installing using the installation software but will not work with any game.

  Hi fubared259,

  This seems to be a common problem with Nvidia 3D vision.

  As for now I suggest to uninstall the drivers completely from the computer and reinstall it from the link below and see if that helps.

  http://www.nvidia.com/object/geforce_3D_vision_winvista_win7_CD_1.10.html

  As a work-around, if you have 64-bit Windows 7 just right click on drive Nvidia 3D and make solving the compatibility problems and run as a Windows XP Service Pack 3 and see if it works.

  If the problem is not resolved I suggest you to contact support from Nvidia for the same thing.

  Access the link below to support Nvidia.

  http://www.nvidia.com/page/support.html

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HELP computer laptop has frozen with power on a black screen and flashing lights

  Hi I have HP Pavilion dv 7-3162nr laptop. When I turned it on all the lights have gone but the screen was completely black. To add, the shift lock and numlock began to Flash all 3 secends. I have no idea why my laptop that was, but pls pls HELP all my tests and valuable information on the laptop. I'm dead without him! Thank you!

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

  If the above doesn't help, see if you can match the sequence of "Flashes" to those shown in the table below.

  

  Kind regards

  DP - K

• Windows 7 memory 64-bit dump blue screen while playing the Star craft 2 and Battlefield 3 in and out of sleep.

  Original title: 64-bit Windows 7 memory dump blue screen

  Specifications of the computer

  CPU: Zambezi FX-4100 3.6 GHz (Turbo 3.8 GHz) AMD Socket AM3 + 95W Quad-Core Desktop Processor FD4100WMGUSBX

  Motherboard: ASUS M5A99X EVO AM3 + AMD 990 X SATA 6 Gb/s USB 3.0 ATX AMD motherboard with UEFI BIOS
  GPU: 01 G-P3-1460-KR of EVGA, GeForce GTX 560 (Fermi) 1 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card
  RAM: G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1066 (PC3 8500) desktop memory model F3-8500CL7D-8GBRL
  PS: CORSAIR Builder Series CX500 V2 500W ATX12V v2.3 80 MORE certified Active PFC Power Supply
  SSD: OCZ Solid 3 VTX3-25SAT3 - 60 G 2.5 "SATA III 60 GB MLC "
  HARD disk: SAMSUNG Spinpoint F3 HD103SJ 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "drive hard internal-Bare drive
  OS: 64 - bit Windows 7 Home Premium
  It's a new generation and I have all updated drivers, bios, and Windows updates. I set my virtual memory for two hard drives (min: 8000/Max: 24000). I run PrecisionX in the background with stock settings, and Asus II HAVE suite and my CPU is overclocked to 3.8 (recommended turbo). I run CNettoyez on a regular basis to solve registry problems.
  I had my new blue screen of generation of dumps from memory, about four times since I built it. It comes into play, i.e. of Starcraft 2 and Battlefield 3, and once when he came out of sleep. I ran a memory test, and he says that he has no problem. Suggestions or anything like that, I need to test again?
  On a side note: don't suck my HDD or is it decent? 1 TB, 3 Gb/s, 32 MB cache. My OS is on my SSD as well as Torchlight 2, and the rest of my stuff on my disk HARD of Starcraft 2 and Battlefield 3, media and stuff.

  Thanks for your help. I think that I thought about it. The "timing" on my ram is disabled, so I manually set in the BIOS and see what happens.

  Also, it would cause W7 to freeze coming out of sleep? I had this recent problem where when my computer out of sleep and it wouldn't wake up and my CPU LED should blink slowly. After turned it off, I will re-start and it would be nice, but now it is that whenever I put it in sleep mode.

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• STOP: 0x0000009C (0 x 00000004, 0x80546EF0, B 0, 2000000, 0x00070F0F) States beginning physical memory dump in Windows XP Media Center 2005.

  Original title: MS XP Media Center OS MCE errors Stop.

  Need help to resolve the error on screen blue stop, MS Windows XP Media Center 2005, M_C_E... STOP: 0x0000009C (0 x 00000004, 0x80546EF0, B 0, 2000000, 0x00070F0F) States beginning physical memory dump.

  Measures already taken, not removed MS register of scanning tools, disk cleanup and defragmentation; safe mode and start to the last point of the working configuration.

  Any help with a fix is appreciated before last resort reinstallation of the operating system

  HI T Dawg,

  You did it of any material changes or software on the computer before this problem?

  This problem occurs because the processor of your computer detected and reported an unrecoverable hardware error to Windows XP.

  You can follow this link and check if the problem persists.

  Stop error message in Windows XP, you may receive: "0x0000009C (0x00000000, 0 x 00000004, 0 x 00020151, 0xb2000000).

  Hope the helps of information.

  Please post back and we do know.

• Physical Memory Dump questions - how do I fix it?

  original title: dump of physical memory

  I am not at all computer savvy, I know how to activate and use the every - word, internet basics. I don't know where post a question so if it is in the wrong place please excuse my mistake.

  I have computer problems... physical memory dump.  It seems this is a common problem so why microsoft does not have a free repair to fix the problem.  If there is one, please report it.  If there is no repair Microsoft how to make fixing it without having to pay $50?  Thank you

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• win xp repair not finish, get a physical memory dump BAD_POOL_CALLER

  original title: win xp repair not finish, get a physical memory dump

  I have a PC that would not start so I tried last good start, no luck. Tried safe mode, still no start. So I went to the CD to do a repair, now it happens about 34 minutes (installation of driver/devices) left and it crashes, dump of physical memory (BAD_POOL) the CALLER).

  I tried different CDs, computer and the memory test. I can see the HD as a second HD on my other computer and it scans clean. When I tried to see if it would end the repair connected on the other computer as the main HD, I get the same thing.

  Any suggestions? Wondering if I need to get a new HD or is there another problem? Thanks in advance!

  It is most often caused by having unnecessary USB devices
  devices connected during installation.

  Setup stops responding with 34 minutes remaining

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;828267

• IRLQ_LESS_OR_NOT_EQUAL_TO 0x000000A then proceeds to run a physical memory dump, I also get something related to memory and then STOP 0x0000001A and 0x00000DE

  Usually when playing games, DOTA 2 and Battlefield 3, I get them more when im playing battlefield 3.

  Hello

  Don't forget to check with the support of game manufacturers and ask in their forums to see if there is
  known problems.

  ---------------------------------------------------------------------------------------

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check have been in 0a, 1A, 7, 50 and.

  When there is that much material different from Bug_Check is almost always involved
  at least some of the issues.
  
  1. remove ALL power and then reinstall memory cards and cables (at both ends, where possible).
  in fact, remove and replace - don't do not just tight. Clean the dust bunnies and ensure that fans
  work. Try adding a small fan blowing into the socket to reduce the effects of heat (heat
  related not always means excessive heat that something might be too sensitive to the same
  normal levels).

  2. test the memory carefully using methods in the troubleshooters below. Keep in mind
  This memory tests only detect all errors as the moment where there are tiny speed differences
  between the modules that appear to be identical. It is necessary to test the modules in
  various combinations and models.

  3 several of the Bug_Check showed CAUSE nvlddmkm.sys who, in the Nvidia video driver.
  Search for Nvidia updates. See the driver update methods in the resolution of the problems previously posted
  above.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  4 check system Maker (manufacturer of motherboard for customized systems) updates to the BIOS,
  chipset drivers low level and major of edge and separate device drivers. Use DriverView
  -Microsoft drivers hide the value VIEW - updated those without emptying in their names. (See pilot
  methods of update in convenience stores previously posted.)

  5. after updating the drivers run DriverVerifier as shown in the troubleshooter below.

  6 use other methods of troubleshooting in convenience stores posted previously and those
  below as needed.

  ===========================================================

  BCCode: 0a 0x0000000A methods as well as updates to driver and memory tests
  are in the resolution of the problems previously shown.

  ===========================================================
  
  BCCode: 1a 0x0000001a

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test. (These are especially for a PC not a laptop.)

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  ===============================================================

  BCCode: 7F 0x00000007E who is also a 0x1000007E

  See these KB articles:

  "Stop 0x0000007E" or "Stop 0 x 00000050" error message in Windows 7 or Windows Server
  2008 R2
  http://support.Microsoft.com/kb/979538

  "Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" error when the GPU is under
  conditions of heavy load in Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/983615

  References to Vista also apply to Windows 7.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ===============================================================

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of faulty hardware, or in case of failure
  hardware installed (usually associated with a faulty RAM, be it the main memory, L2 RAM cache memory, or)
  Video RAM).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently,
  Remove to see if the error recurs. If existing hardware has failed, remove or replace
  the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  Fix a defective system service: Disable the service and confirm that this
  resolves the error. If so, contact the manufacturer of the service on a possible system
  Update. If the error occurs during the system startup, restart your computer, and press F8 to
  character mode menu that displays the choice of operating system. As a result
  Windows Advanced Options, select last good known Configuration option menu.
  This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this fixes
  the error. If this is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume:  Run Chkdsk /f /r to detect and repair disk
  errors. You must reboot the system before the start of the analysis of disk on a system partition. If
  the hard drive is SCSI, check for problems between the SCSI controller and the disk.

  Finally, check the system log in Event Viewer for additional error messages that might help
  identify the device or driver that generated the error. Disable the cache in memory of the BIOS
  could also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  ===============================================================

  BCCode: OF 0x000000DE

  This is usually a driver issue then run DriverVerifier and check the drivers using the methods
  in troubleshooting below. Carefully check the memory using the methods below.

  BCCode: OF 0x000000DE

  Bug Check 0xDE: POOL_CORRUPTION_IN_FILE_AREA

  Bug POOL_CORRUPTION_IN_FILE_AREA control has a value of 0x000000DE. This indicates that a driver has corrupted the memory pool that is used to maintain pages to disk.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  POOL_CORRUPTION_IN_FILE_AREA settings

  None

  Cause

  When the memory dereferenced Manager the file, he discovered this type of corruption of memory pool.

  BCCode: OF 0x000000DE<-- read="" this="">
  * 1221.html http://www.faultwire.com/solutions-fatal_error/A-Driver-corrupted-pool-Memory-used-for-Holding-pages-0x000000DE-

  ===================================================

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">