Interested in WRITING, no Note taking :)

Similar Questions

• For the iPad 2 air, what is the best app for note taking allows you to use a removable keyboard and a stylus? Which is also a stylus good to use?

  I am looking to buy an iPad 2 air to take notes in college classes and I was wondering what is a good software that allows an external keyboard (like a laptop) to type notes and also allows the drawing with a stylus? What is a good pen that is compatible with the app and the iPad 2 air?

  If you really want to use stylus to take notes or draw you should go for iPad Pro with Apple pencil. Nothing else offers good experience especially for hand writing. If you ok with drawing then only pencil FiftyThree is a good choice on iPad 2 Air (but again, it is much worse in my opinion, then iPad Pro + Apple pencil). FiftyThree is also one of the best (paper) apps for note taking (and it works well with their pencil).

  The keyboards are wide work system and not a dependent application. You can go for any model of the 3rd party like you which is compatible with iPad air 2. Advice covers the Apple Smart keyboard are specific to the Pro (they need specific for Pro iPad connector).

• Dual - recording & note taking

  I want to record meetings and take notes at the same time, but the apps that I downloaded so far all stop recording when I switch to the other application for notes.  Clues would be useful

  Open the note-taking app, and then follow the application for registration of one side. You can then use both.

• Internet ex 8 is not takeing a upgrade, 8024200d error code

  Internet ex 8 takeing not an upgrade; IE 8 is on and works but will not take it is a high grade? Why? the 8024200d error code

  Hi jamesfhoagland,

  Thank you for using answers Forum.

  You know that day is it?
  Their generally referenced by a KB as KB947562 article.
  If you can find the update, you can try to download the Setup file and install it manually.

  You can also run the Installer Cleanup utility.
  Here's an article on it:

  http://support.Microsoft.com/kb/290301

  Give that a try and let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox not taking my user name or password. Does not receive do not email from Firefox. This has been ongoing for several years. Help!

  I don't get the emails to return my password. It's quite frustrating. Firefox already has my email JMARKSCHWARTZ at GMAIL dot COM which is correct, then why I don't receive any email. I need to reset my password because I forgot what it was. It should be a SIMPLE process to reset his or her password. Thank you.

  Firefox is a web browser and not a company (which would be Mozilla) or an e-mail client (that would be the Thunderbird client or by e-mail in SeaMonkey).

  To get things moving, you must specify which account you are having problems with?

• What is the easiest note taking app for IOS?

  I've been searching for, downloading and deleting the various "notebook" on the App Store. They are much too complicated. The application 'Notes' that is preinstalled on the phone is Horrible. I had only made a remark and I automatically 4 files now; everything on my phone, deleted Recentley, and note the folder that I created named "do".

  When I open the folder, the majority of the page is taken up by information such as the date and time that I made the remark and information such as 'No additional text', as if I needed to know that.

  I want to just make a to do list and a shopping list that I can open and edit with three simple selections; one to open the application, select the note and edit the note.

  Years, I had been using the Note S who settled on my S4 Galaxy and I loved. Very simple.

  Some other apps I've tried on the App Store were ridiculously complicated. They asked me to make online accounts to use and bombarded me with ads, I had to agree that they own the copyright to my notes...

  I wouldn't mind paying for a simple, no bells and whistles application that is easy to read and simple to use.

  All searches for applications that include keywords such as 'simple' produce results that are anything but simple. I think pretty much all applications out there wants to be simple and easy to use. There are applications out there that claim to be complicated and difficult to use?

  Only you can decide what is 'simple' or not. Have you tried to notability? He gets high on the App Store.

  https://iTunes.Apple.com/us/app/notability/id360593530?Mt=8

• Vista not taking the product key

  Hi all

  My son has a Toshiba Equium L40. A few days ago, the machine would start but after the + screen Windows Loading + the only thing on the screen was the mouse pointer.

  We have tried to start in + Mode security +, but that did not work or the other. The only thing left was to reinstall Vista. However, no matter what we tried that did not work either. It was as if there was no partition or image.

  Regardless, Dad has an OEM copy of the OS +(Vista Home Premium) +. We created the computer and found that a single partition that we thought was a little strange that we had no OS or recovery disk with the computer, but we persevered. When he came to typing in the + product key + located on the underside of the computer, Vista would not accept.

  We have installed without entering the key, but it must be enabled in the next 30 days.

  Is there anyway that we can get the computer and the operating system/Microsoft to accept the PID that came with the computer?

  Concerning

  Martin

  Hello Martin

  Toshiba, almost all laptops come with recovery DVDs. If this is not the case user may create a recovery on its own media and to be honest, it is very important. In a situation like yours, you can use recovery DVDs and make clean OS install.

  In my opinion you should clarify this with your local reseller or Toshiba directly (contact service provider authorized in your country). Maybe they will send you a copy.

  Return to the activation key: as far as I know, this key is not a kind of universal key and it belongs to the preinstalled copy (factory settings). The best thing to do is therefore reseller or Toshiba Recovery DVD and order.
  In the meantime, you can use this version of Vista 30 days.

• F8 not taking advance me startup options

  Hi, I have a Toshiba Equium L350D and I tried to install XP with no luck. I just formatted the C: drive (I've taken care of that incase I need to use HARD drive recovery).
  When I press F8 at startup upwards, it takes me to the recovery options. I do not have the recovery disks, but when I try to use it, I get an error PXE.

  Thanks in advance

  When the C partition and the start-up of any structure is changed you will not be able to use the F8 option more.
  One way to install Vista and once again the factory settings is to use the Toshiba Recovery DVD.
  I don't know why your DVD doesn t work but please try again.

  Turn on your laptop and press F12 for the Boot Manager. Put the recovery DVD in the optical disc drive, in the list, select CD/DVD and press ENTER.
  Just follow the menu on the screen.

• Parameters of the T610 IE not taking effect

  Hello world

  Here is some basic information:

  -HP T610 with WES7 6.1.701.279 (I think that the latest version)

  -SP 2 4.5 HP Device Manager

  Capture image and image deployment are not a problem.

  But last week I tried to change the homepage of a particular Web site. I created the task has sent all of the T610 (16 unit). The task ends well, but when I went to check the computer thinclient. The IE homepage is still pointing to HP Web site.

  The strange thing is that, initially, I had it work without problem. (5 weeks ago)

  Now it no longer works. Anyone could shed some light on this issue?

  Also, I applied the tak to the user account.

  Thank you!

  Gideon

  The unattend file used for sysprep is probably reset.  Change c:\windows\system32\sysprep\sysprep_unattend.xml before the capture of your image on the home page of your choice.

• Why is relativeInitalX value not taking into account the triggering delay? using scope OR with the PXI-5124

  Hi all

  play with a digitizer PXI-5124 in a case of PXI1042Q with a PXI8110 controller that runs labview 2012 (latest updates) with the latest version of the driver NIScope.

  I put in place an acquisition of off-delay (by assigning the triggering delay, for example 20us) which works very well (I can tell by the signal I get delay control works correctly), but the data returned in the info wfm cluster (using the 2D version of niScope I16 Fetch) does not have this delay.

  Description of the relativeInitialX within this cluster indicator indicates "is the time in seconds between the trigger and the first sample in the acquired waveform" but its never to return something around 1E-9 independent of trigger delay. Surely the relative initial x should reflect the triggering delay?

  I'm doing something wrong?

  Thanks for your help!

  So, I made a screenshot of the image in the section "Trigger Delay" link I sent you.

  

  Meaning of the symbol:

  T0 = original moment of relaxation

  T1 = time to trigger used in the acquired record (t1 = t0 + TriggerDelay)

  T2 = time of first sample in the record of the acquis.

  RX = relativeInitialX = t1 - t2

  Response to previous reviews

  «I understand what you're saying - so basically, if I want to know the delay of my trigger for the first sample in the record, I just add my delay time value to the relativeInitialX.»

  • Close, the delay of the original trigger (t0), for the first sample in the record (t2), would actually be TriggerDelay-relativeInitialX

  «.. . Nowhere does graphically describe where is the relative value of initialX real. »

  • Right, relativeInitialX is not a timestamp, so it is not a place on the timeline, it is the difference between two timestamps (t1 and t2 above), where the relativeInitialX name.

   

  "The trigger"record"is the straight line in the Middle, so expect relative to - 1/2 initialX record length?

  • Almost correct, because the reference trigger is relativeInitialX to the position of 50%, will be the time in seconds for 1/2 the record length. (i.e. If the registration has been long relativeInitialX, 2s = 1 s).  RelativeInitialX will always be the delta time between the trigger (t1) and the first sample returned in the record (t2).
  
  
  • For example using the picture above: If t0 is 10 sec, Trigger Delay = 3 sec, SampleRate = 1 kHz, = 1000 record size.  This means that t1 = 13 s.  Our record is long of 1s (1000 points to 1 DC between each = 1 s), if t2 = 12.5 sec.  If away from all these moments are absolute time, as the timestamps.  So relativeInitialX = t1 - t2 is 13-12, 5 = 0.5 sec.
  
  
  • As a side note, the reference position should not be 50%, you can configure to between 0-100%.

  Time not yet discussed record attributes

  I don't want to make you more confused, but there is another useful attribute in the waveform info that we've not yet discussed and its AbsoluteInitialX.  Starting from the NOR-SCOPE help file:"absoluteInitialX is the timestamp of the first sample of recoveries in seconds..." "So, using the above image, absoluteInitialX = t2.

  I hope this helps.  If a part is still not clear, let me know.

  -Nathan

• Pictures and writing are not clean on my screen.

  BUBBLES FROM THE SCREEN

  
  
  BUBBLES OF PLEA SE HOW CAN YOU HELP ME TO FIX MY LABTOP SCREEN? THE PICTURES AND WRITINGS ARE NOT CLEAR.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• I do a windows XP repair install, but its not taking the certificate of number of Authenticity on the cover of the cd why

  I do a windows XP repair install on my Dell on safe mode, but when I use the certificate of authenticity of 25 characters on the cd envelope it tells me that these are numbers are not valid!   Help

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• My CD reading/writing does not (Vista)

  My CD RW does not work. The DVD but works. I have VISTA Home Premium in a machine of a1710N HP improved to 3 GB of RAM. This problem has just popped up one day earlier among the so-called "fixes" was to remove a filter file in the registry. I also used the "fix it" tool on the microsoft site. No idea worked! Does anyone know how to fix this? Thank you.

  Hello
   
  1. do you have CD/RW and DVD ROM connected to the computer?
   
  We assume that you have two CD/DVD devices connected to the computer. Does not work the CD/RW and DVD-ROM works. Is this correct?
  Try these steps and check the result.
  Step 1: Uninstall CD/RW.
  1. click on start, type devmgmt.msc and press to enter.
  2. expand point of CD/DVD-ROM drives.
  3 right-click the void element that refers to CD/RW, then click on uninstall.
  4 restart the computer.
  5. Once you restart the computer, a hardware assistant should popup indicating that a new hardware device is found.
  6 follow the instructions in the wizard to install the device.
  7. check the functionality of the device.
   
  If the problem persists, follow the step below.
  Step 2: Perform the system restore.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. choose a date when the unit was working fine and complete the task.
  3. restart the computer and check the functionality of the device.
   
  For more information about system restore, visit this link: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore
   
  Your CD or DVD drive cannot read or write media: http://support.microsoft.com/gp/cd_dvd_drive_problems
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• sometimes windows media recognizes CD writing - sometimes not

  When you try to burn CDs - sometimes windows media program system recognize Virgin CD - R and the work - sometimes not.  Exactly the same CD - R blank.  Indicates updated w/updates.

  Hello Faye

  If the problem is intermittent, according to me, maybe it's all just be your lens needs a clean place, with a disc cleaning designed for use in pc.s or if it is a laptop and you can access the lens (arrow below) you can clean yourself (a very soft brush and a mild Tickle!) It's also a good idea to skim along the track to make sure they are not dusty (yellow lines)

  Best, Ric.

  

• Not taking client devices updated SP1 for Windows 7

  I have about 40 points of sale of Señor tablets running Windows 7. They work very well, but fail to take the update of Windows Service Pack 1 (KB97632). The software will soon need this update so he could continue to work.

  I deleted the Windows Update cache (C:\Windows\SoftwareDistribution > SoftwareDistribution.old) and nothing has changed.

  I downloaded the .exe update and after that it ran, nothing has changed.

  Look for the updates Windows alone shows the SP1 update when I click Search online updates, for what it's worth.

  After the update has failed, I get error code 800736b 3.

  Apparently solutions billion and two other people have are not a solution for me.

  Please help me!

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it