Office pro 8610 maximum scan resolution Jet only 300 dpi - WHY?

Similar Questions

• HP OfficeJet Pro 8620e AIO - maximum scanning resolution

  According to documents from HP, 8620e for HP OfficeJet Pro maximum scanning resolution is 1200 dpi.

  When delivered softwere is used for the definition of the parameters of scanning available resolutions are:

  75, 100, and 300 dpi

  1200 dpi is not listed!

  Please indicate how to set scanning up to 1200 dpi resolution?

  Best regards

  Ratko

  Hi Ratko,

  300 DPI is the maximum resolution for the automatic document feeder which is set by default, so the higher resolutions are not listed.

  The HP Scan software configured the source that the glass flat rather the default option of the ADF, then you should see higher resolutions of scanning in the drop box.

  Kind regards

  Shlomi

• HP AIO printers: "add pages to Scan" for the resolution up to 300 DPI only

  Hello

  Want to share some information about "Pages of Scan Add' greater than 300 dpi of resolution.

  HP devices will allow, adding a page to ADF documents (CAD) scans at 300 dpi or greater, but not flat scans (which allows you to add a page only up to 300 dpi, anything greater than 300 dpi will not the option 'Add the page analysis').

  Flat scans we do not allow adding a page of resolution 600 and one more great given the re-reading of these resolutions.

  Because flat scans with > 600 resolutions, we decided to provide the user a faster time to preview and select capacity and area from which scan at high resolution, rather than the entire page.

  After that the user has an area forecast and analysis established, then a full analysis of the resolution is performed.  You cannot add a page AND provide these capabilities because you would have to place each of the pages that proofreading is carried out and they will have to be placed exactly where the page was put first for previewing.

  Therefore, if you want to have multiple pages to scan, you can set the the Max resolution 300 dpi (which is sufficient for most documents/photos) and use the ADF or Scan glass.

  Hope that helps!

  Hi @AccraBob

  Hello
  
  I'm glad to hear that your problem is solved and everything works fine now.
  
  Good day!

• All-in-one HP Office Pro 8610: black vertical line on the scans

  I have a black vertical line down my scans and copies that are feeding by automatic feeding (8610 Office Pro HP all in one)

  As I read a few issues on the forum, I could solve this problem by opening the top loader and wipe the glass with a "lens Wipe" wipe Strip

• OfficeJet Pro 8610: HP scanning utility

  Installed the software for my new HP Officejet Pro 8610. The utility will not open and run, so I can't use webprint or scanner. Have a work-around?

  Hello

  First of all, don't forget to run the software update as follows:

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Don't forget to install any update HP or Apple.

  Then install the HP Easy Scan from the Mac App Store application, it will be installed in the Applications folder:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  You can scan using HP Easy Scan?

• HP Officejet Pro L7580 - HP Scan program works only on Mac OS Mavericks 10.9.2

  Hello there Support HP,

  I can not open HP Scan on my Macbook Pro / Mac OS Mavericks 10.9.2.  I have a HP Officejet Pro L7580. Scanning HP program / app just will not open.  I just scan them with my printer, like I did with my other Mac computer that still works on Mountain Lion.

  I would like to reinstall my HP software (HP Scan / to see if that would solve the problem but I can't find the software online.) It's all in your site is the HP-Printer-Driver Update - Patch_v1.0.0, but who has not solved.

  Please let me know if HP has a "HP Scan" for the Mavericks working update for my HP Officejet Pro L7580.

  I would really appreciate it!

  See you soon,.

  TS

  Hi tsmadlucky,

  Thanks for the reply!

  You are the very welcome, I'm glad it's a viable solution for you

  If you don't mind, would you be able to score my post as an acceptable Solution? That way anyone with the same issue can find the thread more easily if it is resolved. If you don't that's fine, that it has never hurts to ask

  Wish you a great week!

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet Pro 8610: Cannot scan from the document feeder

  I'm unable to scan a document using the ADF.  This has never been a problem until I recently updated my OS from Windows 7 to WIndows 10.  Nothing I found online seems to solve my particular problem.  My printer is connected to my Lenovo ThinkPad W520 computer by USB, this is what I've learned so far:

  I can print without problem.

  I can copy a document from the Board without any problems.

  I am able to copy a document using the charger, so the charger seems to be working.

  I am able to scan a document from the tray, then the scan function also seems to work.

  I checked the updates and the printer indicates that the firmware and software are up-to-date.

  What can I do to once again allow me to scan a document from the document feeder?  Your help would be much appreciated.

  Yes, under "Source", I got "Use Document Feeder so burdened" and I got the beep signaling that the document is loaded in the feeder.  So, it wasn't the problem, but I do it thanks for trying to help out.

  Fortunately, I finally found a solution, although it took a job.  I have reset the printer to its defaults, uninstalled the printer (and its drivers) from my computer, downloaded the latest HP drivers (even if the printer had stated that he was "aware" before all this effort) and reinstalled the printer from scratch.  A lot of work, but the printer works now as it did before my upgrade to Windows 10.

  While I'm not a "techie" and do not really understand why things work the way they do, I hope that my efforts may provide ideas for others who may have similar problems after upgrading to Windows 10.

• HP officejet Pro 8610: change of print in only black and white by default settings

  Hello

  I need to change the default print for only black and white settings.

  By default, so I don't have to select this option, whenever I print.

  How to do this?

  Thanks for your time.

  Anette

  Yes, and thanks again. Anette

• Office Pro 8610: auto reply will not work

  Help, please. Ive read all the possible solutions on this post about auto answer does not, have to press on accept in order to receive faxes. I tried everything, check the fax line, changing all the distinctive rings, stop and disconnect all then restart fax always the same question, must agree to hit to receive faxes. A crossed the manual under trouble shooting and tried all of the suggestions. The phone service provider called also and still not working. I lost a lot of hours and can not lose more. ANY suggestions would be greatly appreciated.

  Try this:

  Reach:

  Advanced fax put in place

  Distinctive rings

  (change) One ring. (If it is already set to Single, then change for all the rings)

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• HP Officejet Pro 8610: Problems scanning from Adobe to the adf on printer

  
  

  I've updated the software from Adobe, and now it works, except that it analyzes the legal size, which I can fix it.

  Thank you very much for the help.

• Office Pro 8610: printing color disabled by administrator

  Hello, I need help to replace the following msg when I press the button to print color on the LCD.
  "color printing has been disabled by your administrator or the person who setup the printer.
  I am able to print in color but just unable to colour print from the LCD on the printer itself.
  Help, please!

  HI @beartate8,

  Glad to see that you are using the HP forums, this is a great question other customers might wonder about too!  If I understand correctly, you are able to print in color but can't make a color copy. There is a setting on the Panel before activate you all features on or off. The option is in a hidden menu to help prevent people to access and turning off features, unintentionally so I will private message you the instructions.

  If the steps that I send the problem you. Come back here and click on accept as Solution so that others can see your inquiry is resolved.

  Thank you.

• the office jet pro 8610 has memory to recover documents printers before?

  I'm trying to recover a document that I have printed a few days ago and I can't find it on my pc. The office pro 8610 has a memory that I can go back a reprint of you try the document?

  Hi @bj11,

  Welcome to the HP Forums!

  I see you are trying to reproduce a document for a few days there with your HP Officejet pro 8610. I'm happy to help you!

  According to the user's Guideof this printer, the printer does not store documents already printed in its memory. The only way to recover an already printed document must be made on the computer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• Office jet pro 8610: wireless network connection

  We have an office pro 8610 jet that is connected to the router wireless via a connection cable, wireless to the printer should be turned off. 2 laptops in the House continually revisit the wireless printer output and plug. Why the laptop does not see the connect if the output of the printer wireless is disabled? Even if I check the box for this connection is not to be automatically connected to it will always connect when you turn on the laptop?

  Hello @richardbo,

  Welcome to the Forums of HP and thanks for posting!

  I understand that you have a problem with your devices wirelessly to the network that connects the printer e-all-in-one HP Officejet Pro 8610 automatically. I'd love to help you with this.

  You are right on the assumption that the ethernet disables the ability of the printer to connect to a wireless network. However, the printer has a feature called live wireless. Basically, the printer will be broadcast a signal and act as a router so that you can connect devices directly to it. I suspect that's what devices are connected, then here are the steps which stops:

  1. On the homescreen of the printer, tap the Wireless live downstairs. ((Deuxième à gauche)
  2. Select settings.
  3. Select Direct wirelessand OFF.

  Please reply to let me know if that solves the problem!

  Have a great day.

  

• Scanning resolution

  I use Window 7 software.

  Just bought an officejet pro 8610.

  Is there a way to set the scanning resolution by default to 300 dpi or 600 dpi instead of 200 dpi. ?

  Second question: is there a way to reduce the paper version?

  I could reduce my old printer, but that a different icon printer to print the page.

  Hello

  Thank you for using the forum.

  Set the scan resolution by default to 300 dpi or 600 dpi instead of 200 dpi.

  Yes, you can set the default scanning at 300 dpi resolution.

  If you use it regularly, you can actually 'create new shortcut '.

  See examples of photo

  

  1. Select "Save as JPEG".

  2. Select the resolution (drop-down tab next to the Red dot)

  3. create a new shortcut (remember to save!)

  This article may be interesting:

  "Add pages to Scan" for the resolution up to 300 DPI only

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quot-add-scan-pages-quot-for-resolution-up-to-300dpi-only/m-p/5371575

  The following videos would be useful as well:

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  Reduce the printed copy:

  1. go to "Copy" on the front panel

  2. Select the setting (small icon with wheels)

  3. scroll to "Resize".

  4. press on the icon «Back»

  5 copy!

  Hope that helps!

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.