It is possible to create an interface between the host and the VM

Similar Questions

• Is it possible to create a database of the Clone with the same name of source db?

  Is it possible to create a database of the Clone with the same name of source db with RMAN...
  
  
  DB version is 11.2.0.2
  
  &
  
  Is it possible to clone a 11.2.0.2 database at 11.2.0.3 home location directly on a new server. If it starts in upgrade mode, it's ok...

  Hello;

  Here's what I have:

  Frequently asked Questions about the restoration or duplication between different Versions and platforms [ID 369644.1]

  This thread:

  Re: Duplicate RMAN

  Never done it myself, but I think that his

  alter database open reselog upgrade;
  

  I can predict all the details of this are understood to do a test on a system I can trash.

  Best regards

  mseberg

• Kann ich bei Muse as meine Homepage auch ein für die Browserzeile create Icon. So, wie das rot weisse Adobe Logo, wenn ich die Adobe-Seite eingebe.  The same question in English: is it possible to create an icon such as red and white icon Adobe than i

  Kann ich bei Muse as meine Homepage auch ein für die Browserzeile create Icon. So, wie das rot weisse Adobe Logo, wenn ich die Adobe-Seite eingebe.  The same question in English: is it possible to create an icon such as red and white Adobe icon that is visible in the browser line when I open the home page?

  IAM quite ein und lade icon are in das Feld equivalent, am besten auf der Musterseite unter "Seiteneigenschaften". Sleep visit the den entry "Favicon".

• Lack of interface between Apple Photo and items

  Hello:

  I imported my photos of Apple's Photo to the elements.   All the photos are in the elements, but they have question marks at the top

  left corner and I get a photo is disconnected message if I try to change.

  I talked to Adobe Elements cat and they don't know anything about.    (I take it from the search forum that there is no real interface between the two

  applications.)

  Apple has suggested that I have to copy my photos to a USB file and then import items from there.

  Is there a downside to this?   Which will look like the file structure in the elements?    Should I delete the images currently in the elements before importing?

  Thanks for any help you can provide.

  Andrea Bardfeld

  I have

  If I click on the link to the right answer, where it seems that the answer should be, my system is not responding.

• Location-how to create an interface to the .rrh file using jde?

  Hello

  I created my own files .rrh and .rrc, but when I build my project in jde 4.5 there is no corresponding interface is created for the file .rrh... Please tell me how to create the interface using jde and where it is located?

  create an interface named NAMEResResource (with NAME = your name of the module).
  create a long BUNDLE_ID and a string BUNDLE_NAME and set some values (random).
  You can now add resource strings, with a random value as all are managed by the internal interface of the JDE.

  You must create the entry of resources in the HR Manager/DRR files and copy the name of the entry in your own interface.

• Is it possible to create a table where the month series is represented as columns?

  Anyone know if it is possible to create a table view where the columns contain dates?  I have not seen something like this in Foglight, so I think that it is not possible currently.  Here is an approximate example of what I mean:

  The 2011 monthly average of JVM heap utilization %

  Server	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Ms	Oct	Nov	Dec
  WebSphereServer_1	67	87	45	65	67	78	56	78	88	45	67	77
  WebSphereServer_2	45	56	45	68	89	90	99	34	45	67	78	78
  WebSphereServer_3	67	78	56	34	35	57	7	68	99	78	45	56

  Yes, it is possible.

  You can see examples of that in the out-of-the-box reports / canned reports / group, including "physical host - CPU Utilization monthly summary" and "physical host - memory usage monthly summary.

  You can set this in a Row-Oriented table by specifying the column property 'Iterate Over'.

  You would typically set the value of the "Iterate Over" property to the result of the construction in the query "N consecutive time the beaches."

  Review the definition of "reports / canned reports/memory usage Table" for details.

  Kind regards

  Brian Wheeldon

• Closing tabs creates a gap between the tabs.

  Hello. I'm trying to customize the look of FF by editing the userChrome.css.

  I almost had, but there is a problem that I can't solve.

  After closing a tab with a higher number 40, there are still vacant place between the tabs to the left. See the image.

  That's what I've added to userChrome.css. Please help me solve the problem.

    DISABLE FIREFOX DEFAULT BACKGROUND  
  
  #TabsToolbar:not(:-moz-lwtheme)::after {
  	display: none;
  }
  
  /*===============================================
    INACTIVE TABS
    ===============================================*/
  #TabsToolbar .tabbrowser-tab {
  	text-align: left!important;
  	-moz-border-top-colors: none !important;
  	-moz-border-left-colors: none !important;
  	-moz-border-right-colors: none !important;
  	-moz-border-bottom-colors: none !important;
  	background: #BAB9A8 !important;
  	border-top: 1px solid #4F4E47!important;
  	border-bottom: 1px solid #4F4E47!important;
  	border-left: 1px solid #4F4E47!important;
  	border-right: 1px solid #4F4E47!important;
  	border-radius: 3px 3px 0px 0px !important;
  	color: #000000 !important;
  	/*margin: 0px 3px 0px 2px !important;*/
  	font-family: "Ubuntu",Helvetica,Arial,sans-serif;
  	font-size: 11px;
          max-width: 43px !important;
          min-width: 40px !important;
  }
  
  /*===============================================
    ACTIVE TABS
    ===============================================*/
  #TabsToolbar .tabbrowser-tab[selected] {
  	font-weight: normal !important;
  	border-top: 1px solid #000!important;
  	border-left: 1px solid #000!important;
  	border-right: 1px solid #000!important;
  	border-radius: 3px 3px 0px 0px !important;
  	background: #F0E68C !important;
  	color: #000000 !important;
  }
  
  /*===============================================
    DISABLE AUSTRALIS TAB
    ===============================================*/
  #TabsToolbar .tab-background {
  	margin: 0;
  	background: transparent;
  }
  
  #TabsToolbar .tab-background-start,  #TabsToolbar .tab-background-end {
  	display: none !important;
  }
  
  #TabsToolbar .tab-background-middle {
  	background: transparent !important;
  }
  
  #TabsToolbar .tabbrowser-tab:after,  #TabsToolbar .tabbrowser-tab:before {
  	display: none !important;
  }
  

  Maybe try the Restorer Classic theme to see if that works and review the CSS code that uses this extension.
  The style of the tab bar is quite complicated and also may not be stable across releases.

• New window creates a gap between the Favorites (top) and tabs (bottom)

  19/12/14 bug Firefox began to occur:

  • When having only 1 window open and opening tabs behaves normally.
  • However, when you open a new window of the space between the bookmarks (top) and tabs (bottom) spans all windows. Its boring.

  So far only challenge is to just close and open 1 single window, or to use the module 'Classic theme restaurateur' and switch the tabs position from the bottom to the top, but all new windows will open the gap again.

  Image below.

  Unfortunately, none of these options works, so far, use 'CTR' and turn the legs up (default) allows the opening of new windows without gaps.
  Seems to be some sort of bug recently showing on CTR.

  You will need to find a way to contact the developer to let them know.

  EDIT: It seems to be resolved, seems a new version was released and the problem disappeared. Thank you very much for the help.

• Interface between the browser and my app.

  I'm looking for a connection between the application of the system browser to my application.  I would like to take the URL and other information to be placed in a place defined by the user within my application.

  Someone will lead my to the appropriate documentation and sample applications?  I know that this has to do with the cards and call methods.  I just need a kick to start.

  Samples of code/UML would be fine if someone has a

  You must add your application as a call on the part of...

  http://developer.BlackBerry.com/native/documentation/Cascades/device_platform/invocation/menus.html

• SMV flicking between ESX hosts and generate HA errors

  Dear all

  This may seem obvious, but I'd really appreciate a confirmation of my thoughts.

  We have an ESX3.5 U3 environment with 16 hosts managed by virtual Center. Each physical host has two network adapters for each of the three vSwitches (Service Console, vmkernel and VM network). The two network adapters in each vswitch are powered by two different Cisco 6509 s for redundancy purposes. Last week, for a separate ground, one of Ciscoes was closed, which means that none of the three vswitches had network redundancy in place.

  Yesterday, it was noted that VMs were flicking between hosts - i.e. a VM would be visible on ESX06 for 5 seconds, then ESX11 to 5, then 06 once again, etc. The event log shows that HA is seeking to exchange the virtual machine per physical host x physical host there several times. It is always possible to RDP to the virtual machines, but there is no possibility to manage other aspects of the virtual machine by VC (i.e. vmotion), as I suppose, VC never knows exactly where it should be!

  My first feeling is that HA look at the Console of Service of all physical hosts vswitches and determine that there is a lack of redundancy and therefore seeks to move virtual machines from one host to another, then get stuck in a loop. However, I think that HA has been invoked only (which is actually to move a virtual machine from one host to another) If a particular host actually exit blinked eye and fell completely network - not only if she lost a redundancy...

  I would appreciate your opinion. And by the way, I'm not sure when the networking team will be able to get the second Cisco and running again, so want to rule out the possibility that this problem can be caused by something else.

  Thank you very much in advance for your help.

  have you seen this KB?

  http://KB.VMware.com/kb/1005051

• is it possible to create a guide on the labview interface to tell the user how to use my program?

  

  Basically, it is the image of the project I'm working on and I want to know if I am able to create a guide that pop out by telling the user which button does what when I run the program.

  Yes, you can create a Help window (use a button dialog box initially) you can have Sub vi with indicator of text displaying your guide.

  A better way to explain what each control and indicator displays using the band Council.

• Creating user interface inside the transmitterPlugin.cpp

  Hi, I had two questions about transmitterPLugin. I am trying to create a plugin that will transmit data to the monitor of first source pro on an external device.

  

  (1) I use the MessageBox to create a normal window from the code above, but how to create a UI like premier pro has inside the function above? Is there documentation on creating interface user using C++?

  Or should I create a Javascript UI file that is used by the C++ plugin loading?

  (2) in the SDK documentation mentions this:

  

  By clicking on the following call pass does not any useful information. I also checked on a previous post on this https://forums.adobe.com/thread/1179336

  Adobe explain please how can I get the suite to call forwarded to work. For example, should I create a video filter that, if the user adds to the clip, it should

  Send the entire timeline for external devices, how to use the SDK example files to achieve this? Should I export a Video_filer plugin and a plugin of the issuer or should

  Add the source code of these two into one? It would be useful to understand the workflow, since there is no examples related to this in the SDK.

  Thank you

  Since you have to scrub the timeline and see live results, plugin show is the way to go.

  The interesting part of your project, it's that you must return the frame for head tracking, even if there is no new image from Premiere Pro.  I agree that you need the while loop in a separate thread or process, so that it can continue to loop and manage the lead followed separately.

  SetupDialog certainly isn't the place to run a processing loop.  This is only a place to display the user settings and save them.  To the settings dialog box, you can use Windows or Mac API.

  During the ActivateDeactivate, you can manage physical access low level, and could be a possible place to redeploy a new priority processing thread that assumes the head track frames and handles.

• Is it possible to create a contact with the API block filter?

  I use the API block to export contacts and would like to create a filter by using the API.

  Is this possible?

  If so, is there an example?

  I use a POST at .../contact/filter and get an error HTTPNotFound.

  Any guidance would be appreciated.

  Thank you

  Frank

  Of course

  You send a http request using the POST method when creating the export. In the message body, you include a JSON encoded string. Here is my code PHP to create the appropriate table:

  $a_requestbody = array)

  "filter" => $a_filter.

  'name'-online 'export'.date ('Ymdhis'),

  "secondsToRetainData"-online '3600',

  "fields"-online $a_fieldmapping

  );

  The $a_filter variable is an array, which is set up like this:

  $a_filter = array)

  "FilterEnsemble"-online "valueEqualsComparisonValue."

  -Online $a_fieldmapping ['C_EmailAddress'], 'value',

  'comparisonvalue' => ' [email protected]'

  );

  I assume that you know how to configure the mapping of the fields, so I did not include here.

  Other types of filters are available here: http://secure.eloqua.com/api/docs/Static/bulk/1.0/doc.htm#FilterRuleType

  Hope this helps,

  Wouter

• Is it possible to create an object using Trapcode Form and then use that object as a particle in Trapcode particular?

  I made a few objects in Cinema 4 d and I tried to import them into after effects CC 2014.  I get an error saying "Cannot find Adobe Premiere Pro Dynamic Link".  So I tried in AE CC and that worked.  However, I would like to create a form object and then use it as a particle Trapcode particular.  Is it still possible?

  Thanks for any help!

  You can use almost anything in any publication as a particular particle. However, the particles will be actually 3 dimensions. You can simulate a 3d look by the presence of an object revolving in a precomp and loop as the animation of the particle, but not otherwise.

• Creating a space between the image and text

  www.bristolequestrianservices.co.UK

  On my index page, I created an another social media on my page buttons on my right side.  Don't want to confuse people but social-media-icons2 # are on my right side because I wanted to change the margins.

  I want a gap between my h2 tag "View Gallery" and then the photo and a space after the photo and follow us...  Thank you, Karen

  CSS

  #social-media-icons			{float: right ;}}
  #social - media - icons ul li	{display: inline ;}}
  UL #social - media - icons		{margin-top: 40px ;}}

  #social-media-icons2		{float: left ;}}
  #social - media - icons2 ul li	{display: inline ;}}
  UL #social - media - icons2		{margin-top: 10px ;}}

  < div id = "right" >

  the latest news < h2 > < / h2 >

  < p > < a href = "newpictures.html" > new pics added < /a > < /p > "

  < p > < a href = "testimonials.html" > new stories < /a > < /p > ""

  See the Gallery < h2 > < / h2 > < br >

  "< img src="images/photos/1a.jpg "/ > < br / >

  Follow us < h2 > < / h2 > < br >

  < div id = "social-media-icons2" >

  < ul >

  " < li > < a href =" https://www.Facebook.com/groups/150449201771804/ "> < img src="images/icons/facebook.jpg "/ > < / a > < /li >

  "< li > < a href =" £"> < img src="images/icons/rss.jpg "/ > < / has > < /li >

  " < li > < a href =" http://www.Twitter.com "> < img src="images/icons/twitter.jpg "/ > < / a > < /li >

  "< li > < img src="images/icons/youtube.jpg "/ > < /li >

  < /ul >

  < / div >

  The H2 tag absorbs a rule applied to many items on line 10 of styles.css (margin: 0; padding: 0;).

  The H2 tag is used in contexts as long as you probably don't want to add a fill rule for all of the H2 in concrete. You can add a generic utility class, for example:

  {H2.padBottom10}

  padding-bottom: 10px; / * change to quantity * /.

  }

  The tag 'Follow us' is a good example of this because it would have absorbed this bottom padding if you do not use a class for itself. It should also have a generic class applied to him of H2, so that others are not affected, same as above, but a different utility class:

  {H2.padTop10}

  padding-top: 10px;

  }

  As with CSS, there are 1 million ways to do this, but on specialized articles like this, if it doesn't appear in the same place or continues a smaller purpose, applying a general utility class can be useful.

  Then you must add just the H2 class, for example

  See the Gallery

  ,

  Follow us

  .