Interface user and Options suck!

Similar Questions

• Interface user and the features of Dreamweaver to Golive GL

  Why Adobe will not adopt no Golive GL UI and features for Dreamweaver? AS a Golive designer has a superior design interface a lot and then Dreamweaver. Adobe take the grid drag and drop features in Golive and integrate in Dreamweaver.

  An answer to this is that it creates ugly code. The grid is, in principle, a table, it seems that as a grid in GoLive. Tables are not used for purposes of layout of our days. These techniques go well with today which are essentially the html and css and standards for some sites of databasedriven.

• Epson-Scanner: attempt at analysis and I get: interface: not connected, option: unknown

  attempt to analysis and I get: interface: not connected, option: unknown

  Yes, 64-bit. I downloaded the correct drivers

  Right - we have established that.  What I asked (or thought I asked, sorry for any confusion) was the seocond time:

  Is the error you receive [interface: not connected, option: unknown] from a native Windows application, you are running OR the scanner utility Epson or som another application?

  I ask because it is important to know which application is gving you the error because those who are integrated into the code, usually.  The errors mean more if you know the name of the application giving error while looking for the error itself.  Epson has what he calls, "Epson Stylus NX300 and NX305 EPSON Scan Utility" and I was trying to establish whether it is what you use when you try to scan and so what gives you the error [interface: not connected, option: unknown] you have found?

  For example, a google search for:

  the Epson scanner interface: not connected, option: unknown

  Give some success (including this conversation.)  You may need to contact Epson directly support to help with it.

• 'Collector (optional) user' and the authorization of minimum on vcenter

  Just trying to install a vcops and I'm a little confused on the required permissions in vcenter.

  First of all, the wizard wonder an OPTIONAL information on the accommodation of vCenter Server (vcenter that hosts the vcops device?).. why the unit wants to know this information?

  Then the wizard requests the information on the vcenter to monitor: 'User registration' and 'collector (optional) user... What are the differences? Who are the minimum permission? I see in the guide of the administrator that the user to gather information could be a read-only root vcenter inventory... but nothing abou the user registration/collector.

  Thank you.

  Record user and collector are different, this extension of reg/unreg necessity of user registration, license priv, etc.. Whereas the collector should read + storage view: views + global: health.

  These roles/perms are described in the notes version and what are the specific private req needed for each role.

  If you do not specify a user of collector, the user record will be used for the collection in addition to recording. Where the "optional".

• Difference between variable interface user layout and presentation of the add() method UI?

  Hello

  What is the difference between a variable user interface layout and presentation of the add() method UI?

  Presentation of the variable user interface is something like this:

  var windowResource = "palette {  \
      orientation: 'column', \
      alignChildren: ['fill', 'top'],  \
      preferredSize:[300, 130], \
      text: 'ScriptUI Window - palette',  \
      margins:15, \
      \
      bottomGroup: Group{ \
          cd: Checkbox { text:'Checkbox value', value: true }, \
          cancelButton: Button { text: 'Cancel', properties:{name:'cancel'}, size: [120,24], alignment:['right', 'center'] }, \
          applyButton: Button { text: 'Apply', properties:{name:'ok'}, size: [120,24], alignment:['right', 'center'] }, \
      }\
  }";
  
  var win = new Window(windowResource);
  
  win.show();
  

  presentation of the UI Add() method is something like this:

  var w = new Window('dialog', 'Random Number Generator');
  var btn_group = w.add('group'),
      btn_ok = btn_group.add('button', undefined, 'Ok');
  
  w.show();
  

  Thank you!

  Since the Guide Javascript Tools on the specifications of the resource (you're high example on the page):

  You can create one or more UI both elements by using a resource specification. This specially formatted string provides a simple and compact of the creation of an element, including any container element and its constituent elements. The resource-specification string is passed as a parameter to the constructor function Window() or add().

  The general structure of a resource specification is a specification of item type (for example, dialog box).

  followed by a pair of curly braces surrounding one or more property definitions.

  myResource var = 'dialogue {control_specs} ";

  var myDialog is new window (myResource);.

  The controls are defined as properties in windows and other containers. For each control, give the name of the control class, followed by the properties of the control between braces.

  I had trouble getting the resource specifications to work - probably just didn't make the time to understand. A few differences is that some of the properties that they put in the resource specifications in brackets after the element will not work in the other method, if you do it this way. You normally have to make a second line and add this property. I'm not sure of the first method, but the second is the function object, and you can use the structure of the object (object, nextProperty, etc.) or set a variable to represent the object. In most of the scripts that I write, I use variables and give them a name such as:

  myCheckBox var = dlg.inSomeGroup.add ('checkbox', undefined, "text box '");

  myCheckBox.name = "maCaseACocher";

  By doing this, I can create a recursive function that goes through the entire user interface and retrieves the values of the elements and writes this information to an xml file. Including the names allows the script to identify which variable to control / it is in the xml file, so that it can be reassigned to proper control. I have not tried this with the method of specifications for resources, so I don't know if it will work with it.

• INTERFACE to AUTHENTICATE USER and CONNECTION for Oracle Forms 10g...

  Hello Hello Silvere all the...
  
  I was wondering, is it possible to create a small interface where a user may connect by giving the user name and password to view the form... Run, a popup window by default when the user mode
  must give its user and password... is it possible... If Yes... Please show me how...
  
  And secondly, I have two 10gs oracle on separate computers, we're on laptop and we're on the home computer, both Versions are identical, and I create a BCSPROJECT user with 25-30 tables and
  views, I exported and imported from the laptop to my computer at home... My question is, is it POSSIBLE, when I connect my laptop to a WAN in my LAB of the DEPARTMENT and have access to my house
  computer base... ANY HELP will facilitate my work import and export again and still much easier...

  Hello

  You can try to create you're own login form.

  Please search in this forum, you will find the right answer.

• Payment through custom authentication not based on a scheme simple name of user and password

  We are looking at Adobe DPS to publish our digital magazines.  Like many other publishing companies, we also have existing customers 'print '.

  We have an authentication solution that uses WS-federation.  It works by accessing our connection site.  After the user is authenticated, we POST a security token JWT to return to the calling application.  It is important to know that we want to show the user interface for the connection.  Some of our connection to customers through their Facebook/Twitter account, so we have no password for them.  Our site of connection also allows all our applications and Web sites evolve in a coherent way.  For us, it's really important that we don't create additional identifying information for our users.  We want that they authenticate in the same way everywhere.  (connection website also deals with changing the "General conditions" and will be automatically enabled future external identity providers (such as Google and Microsoft - it also allows to force people to update their profile, if we do not have a complete profile etc...).)

  The right DPS solution, we see that the only option that is provided out of the box is to authenticate users by name of user and password credentials.  Is it possible to replace this mechanism with a scenario "open embedded browser / capture token"?  If so, how is that possible?  (I guess that other operations of payment are OK for us)

  Thanks in advance.

  In the new DPS (2015), the only way that a user can connect is via the dialog box native SignIn using the credentials of the user/password. Details: The native connection method will result in a call to the serviceAuthURL specified parameters of the Integrator for Direct payment. DPS will make an Http POST request to the URL SignInWithCredentials passing the username and password. DPS expects an authentication token to be returned to the viewer stores in native mode. This authentication token is what identifies the user for direct payment calls

  In the earlier version of DPS (classic), connection differs in two ways:

  1. DPS allows HTML to open a speed of connection of the freeform and similarly out of the application to get an authentication token
  2. DPS had a SDK API library whose application could explicitly define an authentication token after the opening of the flow of custom connection

  There is no equivalent for classical DPS SDK API in 2015 of DPS at this time. Although we plan in the future for additional capacity of connecting OAuth/Social.

• A challenge: combining dirty tab Interface User Shell + self-closing-BTF

  I find it difficult to use the facilities of the shell of the interface user ADF of the conduct of the stubborn self-closing-standalone task.
  
  What the Shell of the user ADF interface does well: in the Shell of the user interface, you can open a standalone BTF as an activity, and if the BTF closes itself (that is to say... given the user selects ok or cancel/close button, the BTF stand-alone navigates to a special return flow option), the BTF closes and the ADF UI Shell correctly closes the tab around the activity.
  
  My challenge is that I want to add installation tab 'dirty' shell ADF of the user interface for the task force, such as if the user inside the BTF selects a custom cancel/close button (not the Shell UI button close tabs) that accesses the task-flow-back option in the Working Group, they had the chance to confirm or cancel the closing via the ADF UI Shell dirty tab popup. (Note that task-flow-return options are crucial to BTF to self-latch because they not only allow the BTF of commit / rollback, as well as make them re-entering or playing with the functions of backup point).
  
  If the ADF UI Shell shellLauncher Bon we call method makeCurrentTabDirty on the opening of the BTF, activity of the BTF tab is italicized properly. Even if the user selects the BTF Cancel button, the BTF farm (she disappears in fact from the Shell of the user of ADF interface) but the Shell of the user activity tab interface is still visible, then watch the dialogue dirty tab, which is too late, the Working Group has already closed.
  
  So my solution is when the button close down BTF, before he navigates to the BTF task-flow-back option, I can get the ActionListener to the button close BTF to trigger an event that is contextual to the shell of the user ADF to capture interface "shut up" occurrence. The Shell of the user interface then has a chance to show the dirty tab dialog box by capturing the contextual event.
  
  Then, my sticking point is the class TabContext provided in the Shell of the user interface has no way to call the dirty tab dialog box without calling the removeTab method. It is not desirable for the Shell UI close the BTF as task-flow-return of the BTF activities must always be called... remember that they have an additional feature that is required for the BTF.
  
  Even if the TabContext method is a solution to display the dialog box dirty tab without closing the tab (TabContext is pretty easy to extend yourself if you have the source code), the problem to which I can't think a solution is, how to get the tab dialog box dirty to communicate with the BTF stand-alone version (yes/no) result such that it can take a decision on the abandonment of action close and let the user on the current page fragment, or accessing the task-flow-return node?
  
  We could suggest that I could expose the dirty to the BTF stand-alone tab dialog such that she could show the dialog box confirm himself. However the point being is the BTF is autonomous and should have no knowledge where it is used, in the Shell of the user interface or some other supershell application. Publish plans to close the BTF via a contextual event seems fine, but alternatively of loading in the components of the interface layer user seems to break the independent principle I-don't-know-or-care-about-what-my-parent-caller-is-doing BTF appears on the border of evil.
  
  Anyone pointers, suggestions or comments like you're-an-idiot-Chris,-do-it-this-way? Your help is appreciated.
  
  Kind regards
  
  CM.
  
  PS. JDev v11.1.1.2.0 with interface User Shell v1.02

  How to get the dirty tab dialog box to connect the result (yes/no) with the BTF stand-alone version, as it can take a decision on the abandonment of action close and leaving the user on the current page fragment or accessing the task-flow-return node?

  I hope that everyone interested in this challenge is useful the application at this link: http://soadev.blogspot.com/2010/08/loosely-coupled-bounded-task-flows.html

  Kind regards

  Rommel Pino
  http://soadev.blogspot.com

• How can I remove comments from the users and groups

  I have my in my users and groups in the system preferences a user snd invited another user

  How can I remove them

  Go to Preferences system-> users and groups, and then press the lock to allow you to change the settings. Then choose 'user comments' in the sidebar and uncheck "Allow clients to connect to this computer". This will not make this option disappear, but after that you will not be able to use the Guest user.

  «Respect for the other user, simply choose it in the sidebar and press on the '-' button.» Make sure that no one uses this user.

• It not install on Win7 Home - don't say no admin tho I'm only user and admin profile

  Running Acer laptop Win7 Home Edition, Avira Antivirus, Windows Firewall. Mozilla's Firefox downloaded installer stub. On running it, it reads "extract" and then displays a message saying "some facilities may not work Installationavecuneracine current user" and shows two options: run with the current user and administrator (to be completed only for the administrator password).

  Click the current user and the program disappears - nothing happens. There is only 1 profil_utilisateur on this system - user current, called 'a' with privileges and no password. Click on administrator insists on the password, will not accept the empty password field and disappears.

  I created an ID of administrator with the password and logged, but the same two options new pop up - and the disappearance even once program is selected.

  Tried with Avira and disabled Firewall. Makes no difference. Running Firefox earlier version with the active user profile and no problem. When the upgrade program itself, this problem started while I have to use IE or Chrome.

  I'm typing this from my desktop system where Firefox works fine.

  OK, your sub windows 7 when you downloaded the file to go to her and right up until it clicks. On this list, there is an option "Run as Administrator".
  Click it and proceed with the installation.
  This is what may be the problem as Windows 7 has problems with UAC.

• name of user and password registration

  I have multiple google accounts. I was able to record a combo of name of user and password (auto guest) for both of them, but have not been able to get Firefox to prompt me to save the name of user and password for additional accounts. I checked everything I could think - exceptions of site in the menu 'options', deletion from the list of saved passwords and restart, reinstall the browser - but can't seem to solve the problem. No idea why it would save name of user and password for some accounts, but not others? THX

  Have you checked the two articles at the bottom of my post above other suggestions?

  Some sites like PayPal, Yahoo, Windows Live, and bank sites use autocomplete = "off" to prevent Firefox to save and fill in the name and the password.
  
  If a site uses autocomplete = "off" then look at this article for a bookmarklet to remove the attribute autocomplete and Firefox will provide store name and password.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • http://KB.mozillazine.org/Password_Manager

• I forgot the name of user and password and my email has been deleted! Help!

  Hello! I have a Skype account with an email, I used to have (it's been deleted) and I can not find the user name and password. Skype account is still active by the way, I just can't log in cause I don't have the name of user and password. Is there any other way (except mail) to discover the password/user name?

  Whitout access to registered e-mail, I guess calling the service the customer is your only option, however, if you don't remember the user name or any other information that you can link to the account, retrieve the account may be difficult. If you already use Skype, a computer, you have access to, the %appdata%\skype folder contains a folder with the same name as your username (and all the others who have used the same computer logged in as that user).

  https://support.Skype.com/en/FAQ/FA1170/how-can-i-contact-Skype-customer-service?FromPage=search&fro...

• Portege R500 - cannot remove the password user and supervisor

  Hoping someone can help me with a problem,

  I voluntarily put a password for user and supervisor on one of our Portege R500.
  I know what the password is, but I just want to remove so that I am not prompted for the password whenever the laptop is turned on.

  I seem to be unable to disable this feature, which is a problem that the laptop is about to be reassigned to a differnet use that would be impractical for users to have to put a password on startup.

  He must have a way to disable the password requirement.

  Of course, you can disable this password. Just use the same way you used to.
  It can be done using Toshiba Assist > Secure. You used this way to get into these options, you?

• How to increase the number of user and a guest on laptop?

  By mistake I changed the number of user and it a how I could do so I odnt remember, but now I want to change new so that I can active comments as another user account, please let me know how to change a favor to active clients

  I now have Vista OS. before I could do guest account can be used but I dnt remember but somewhere I made a change which required the number of users on the desktop I have 1 now, I forgot

  to please tell me where this option, so I can do it again it 2 or 3 by the guest account now do either not connect you he says that this service is not available and cannot be connected

  Hi James,

  Maybe this will help:

  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  http://www.Vistax64.com/tutorials/126933-guest-account-turn-off.html

  I hope this helps.

  Good luck!

• JO 8500: Scan to network - name of user and password files invalid without password.

  I use a 8500 Pro Wireless (A909g) on the Windows 7 computer.  I'm trying to set up the network scanning feature folder.

  Problem is this: I dno't having a Windows password set in place.  In this case, the printer cannot connect to my computer.  If I put a password on my PC and then change this password network settings analysis, then it can connect.

  I don't want to have a password on my PC and would like the printer to connect to it that way. I tried to delete the profile and add it again.  Still no luck.

  Any help?

  I solved it.

  Two things to check.

  (1) under the share Options Advanced (Network & Sharing Center--> homegroups and--> share options options advanced sharing...) -protected by password sharing must be OFF

  (2) for the file that you want to share and you scans registered to, do a right click, properties, security.  You must add 'NETWORK' as a user and ensure that its set of READ/WRITE.

  It fixed for me.