intermittent failure of the circuit restoration

Similar Questions

• failure of the system restore

  I have a dell Windows xp computer.  everything on it was working fine and the a few days ago the internet Explorer was working really slow but everything else on the computer was working fine.  so I did system restore to when it was working fine.  My computer has restarted and then BAM it nothing at all, but keep trying to reboot over and over again.  I don't like not really on the computer I was due for a new still, but I have pictures there that I want to come back and I was wondering if there was anyway at least to recover the photos.  Oh and I tried to start safe mode and all the options I got on the screen but the same thing. So if someone can tell me a way to recover these pictures, I would be very grateful.

  Hello

  The best way to recover the photos is to take out the hard drive and attach it to another PC as a slave drive, or second. Locate the drive connected, then copy your photos. The photos are usually found under X: \Documents and Settings\UserName\My Documents\My Pictures (where X is the drive letter of the hard drive attached andusername is your user profile.)

  Alternatively, you can try to make your PC work again trying to recover your registry database. You can read this document to do this: http://support.microsoft.com/kb/307545

• Failure of the factory restore?

  I tried to do a factory restore on my HP Pavilion m8247c with windows vista, so I could start over and put a new operating system on it. After that the restoration was finished he started and I got an error message saying: Configuration system error. Saying that if I fix my PC does not work, then the message ended by saying "(Code Purple)". "  Someone knows how to fix this problem, so I can use my computer again?

  Hello

  If you want to try to get Vista running, then try this:

  With error code purple on the screen, press SHIFT + f10 (the shift key and press F10 (at the top of the keyboard) at the same time) to open a small screen called command prompt. (So you get a small black screen with white text that says something about your first Windows version and ways down a bit, you will see "C:\ > '.)   It is all ready before you start typing.)
  Type the following line, just as you see here...

  Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  so it will look like this

  C:\>Notepad C:\hp\bin\checkdmi\checkdmi.cmd

  Press ENTER.

  You will see the text of the file listed in a window using a simple text editor.
  Go to the beginning of the text. Press ENTER to set a space. This type...

  Goto cleanup

  Therefore, everything that comes after that, the first line looks like this...

  Goto cleanup

  Save the Notepad file and exit and restart your PC. You're good to go.

  Otherwise, install the new operating system itself, as has been pointed out by Frank.

  Jaco

• Replacement hard drive after the failure of the HD, restore disc problem

  
  

  The replacement hard drive should be the same capacity as the original hard drive.

  If your goal is to use a SSD, then you will need to migrate the operating system with a working operating system software cloning.

  Samsung, Corsair and other manufacturers sell kits of migration with usb connectors SATA that allow the cloning process work perfectly from a hard disk inherited a smaller SSD.

• Everyone has the circuit main flex fixed on a Canon 5 d?

  Last year I got the circuit main flex repaired on my Canon 5 d. The camera just stopped working and lights at all. I have never learned what was the cause of the failure of the circuit. Is it possible to change a lens without turning off the camera could cause harm?

  The repair was carried out 10 months ago (9/2014) and the same thing happened a couple of days - the camera would not turn.

  I did the usual diagnosis - check the battery power, took the battery and card flash, switching lenses without result. I fear that the same failure in my camera has occurred.

  Does anyone have a similar experience?

  Hello bakerstreet!

  Thanks for posting.

  It is recommended that you turn off the camera before swapping lenses, but it is difficult to say if it is causing the problems here.  I know that sometimes the battery may be the cause if she is exhausted because of his age.  Have you tried another newer battery in the camera?  If the camera feeds not on with another newer battery, so it's something that must be repaired by authorized Service Center.

  To start the repair process, you need to fill out a service request on our Web site.

  Moreover, since the camera is more than a year, you have the opportunity to participate in the Canon loyalty program in place.

  The option of the Canon loyalty program allows you to replace your current phone for a reduced fee, postage.  The original non-functioning camera would be then returned to Canon USA for recycling using a which would be offered prepaid shipping label.

  If you want to participate in this option, please call our sales in the 866-443-8002 Department, seven days a week, from 08:00 to midnight.  Let them know you have worked with online support and the Canon loyalty program.  Be sure to have your serial number of your camera when you call.

• problem with the system restore when you try to back up disks

  my system crashed.  would not boot.  Several attempts later, went to the system recovery... do you have a full upward (23 dvd) then did a complete restore.  laptop works.  However restore my files from the backup disks does not work.  I get a failure in the system restore somewhere in the treatment of the disc 12 (out of 23).  Help!  sighing heavily... of course this happens when I am in a time crunch

  Hello cyberterp. I see that you are having problems to restore your data from backup disks. To make sure that I understand you were able to make the recovery of the operating system, but the data you have saved in the course of the process you're trying to get now?

  Check the bottom of the twelve disc and make sure that there are no scratches on it. If there is even the smallest scratch to find a local store that will shine the disc for you; This can allow you to read the data. If discs are in perfect condition and then either media are bad or there was a problem (unnoticed) during the backup process and it is unlikely that you will be able to recover the data.

• Get failure catastrophic error when running the system restore

  Original title: System Restore

  When I try to use the system restore I get a message syaying that system restore did not complete - this error 0 x 80070057 and he SIAS catastrophic failure

  Anyone knoe what to do to fix?

  Thank you

  Maggie

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070057/0b8c7c81-3fe9-4D43-8369-1a41a5756171

  It will be useful.

• After a failure of the internet, my desktop icons, screen saver and home page (canoe.ca) were lost when the internet was restored. How can I get back them?

  try to restore information lost after the failure of the internet

  try to restore information lost after the failure of the internet

  Hey buceriasbev

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and read this too

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-Internet-Explorer-home-page

  Walter, the time zone traveller

• update problem failure in the installation of updates to restore changes

  I use windows 8 unique language. Whenever I have install the update and try to restart my pc, when you set up the window, there is message 'Failure in the installation of updates to restore changes.'

  Help, please.

  Thank you.

  Hi Manish,

  This problem may occur if Windows updates are not getting not properly installed or damaged.

  I suggest you try the steps from the following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  
  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• Intermittent failure to detect the screen on startup on the Satellite X 200

  For awhile now, my X 200 suffered intermittent problems with the screen. When turn he will deliver a long and two short beeps and then proceed to start but without the screen.

  I normally feed the cycle several times and find that it sorts itself, but tonight he would not cooperate so I dug a cable for my TV and used as a monitor and of course the machine starts very well and after POST went immediately to the embedded poster again. Does anyone have an idea what is happening and why?

  A little more background.
  This is slot and turned off for about a month now.
  I used a variety of drivers the two latest WHQL and LV2G releases, but they all have the same problem.

  Right now I'm on the default of most drivers, and I'm going through the process of sprinkled updates having rebuilt just clean the machine because of other problems (in a separate thread), but immediately before reconstruction, the problem has been all too obvious and all the drivers were later so I don't think this is a driver related issue or at least not one that seems be resolved by any of the releases.

  Seems rather strange. Did you check your BIOS options? Maybe you should set this back to the default settings.
  Or try and install the latest version of the BIOS.
  If that's not enough, and I read that you already have a clean reinstall the latest drivers, I would say that contact local ASP, as a beep sounds are not normal.

  They can tell you what mean these sounds.

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• Reinstall Windows XP Home Edition 2007, version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) after the failure of the hard drive and without operating system installation CD?

  I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.

  Hi Bobby Collas,.
   
  You must have a copy of the installation CD without which you can not re - install the OS again.
   
  If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same.
   

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)