Intermittent problem with slides in Captivate 6 transitions

Similar Questions

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• Intermittent problem with IE8

  Using XP Prof SP3. When the computer is turned on for a while IE8 does not connect with the router. Firefox, Outlook and other programs work OK. If I reboot computer IE8 OK still once, after maybe an hour or two of IE8 doesn't is not the same problem came back

  Hi Sean,.

  I see you have some intermittent problems with internet Explorer 8. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the brand and model of the router?

  Method 1.

  How to troubleshoot possible causes of problems of Internet access in Windows XP: http://support.microsoft.com/kb/314095

  Method 2.

  Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab2

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• I have problem with slide show.

  I have problem with slide show, when I hit the button to see my video, the termination of the program. blocking the program. and displays a message to close the program could someone help me?

  Hi clevissonc,

  Could you please let me know the version of Lightroom installed on your computer?

  Also what operating system you are working on Windows or MAC?

  You click on preview or play?

  Kind regards

  Tanuj

• Having problems with slide "Transitions".

  I want slides have no transition so that they don't fade and fade out? I scored the slides for "Without Transition" in the properties panel, but also that they fade in and out. When I put a button 'Next' on a slide, she faints and then shows the button... AAAARRRRGGGGG! I'm at my wits end trying to solve this problem. Please can someone help?

  Hello

  Slides have normally no transition. Check the objects! Objects (text captions, Images, buttons, etc.) are normally configured with fade in and fade out.

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Problem with slides on the new Captivate 8 model objects

  Hi all

  Recently, when I created a new project model of slide objects are all too big to slide, no matter which project to choose.  I have uninstalled and reinstalled the product several times and deleted all the files about the problem but I still can't get it to work.

  

  You can see here that the objects are all larger than the slide behind it, which leads to the items ending on the side when projects are published and in preview.

  When I try to do a sensitive issue I get the opposite problem with the objects being much too small as shown here

  

  If anyone has had this problem >

  "All files"? Are you sure that you deleted the Layouts folder in public documents and updated the Preferences folder? The screenshot shows one of the default themes, you have customized this theme? It happens with all the themes?

• HP Color LaserJet CP2025: Intermittent problem with printer producing pink wide unslightly strips

  I use a HP ColorLaserJet CP2015.  From time to time he overprinted documents with pink ribbons which is unslightly.  The documents can be used only for use in-house.

  It is an intermittent problem and may occur as early as the beginning of printing or begin in the middle of a print job.

  I ran a diagnostic report, but I do not know how to interpret it.

  Any suggestions?

  Thank you

  Alan

  P.S. I'm sure that the printer is out of warranty.

  Just thought that I'll let you know that so far I did not have pink wide overprinting.  It seems that it was a faulty cartridge.  Thank you very much. I would not have thought this.

• Only intermittent problem with wifi on alienware m17x with qualcomm wireless killer

  Hi, I have an alienware M17x with windows 8.1 and qualcomm wireless killer. I have a serious problem with intermittent wifi, that appears when I use programs like Skype, steam, multiplayer games, etc.

  Even if the wifi is connected, the connection suddenly stops working sometimes, especially when I use the applications mentioned above. (if I try to load a Web page during this time, the page remains attached to "resolving host"). Strange thing is if I disconnect and reconnect to the wifi Internet starts working immediately. Or I can wait a few minutes and the connection is re-established automatically. This isn't a problem with the network, because I had this problem on countless wifi networks I've worked, and all my other devices work fine in the same time, that my laptop no longer works.

  Additionally, this problem occurs only on wifi, if I use a connection cable, this never happens. (this is not yet a case of the wifi signal strength, as happens even when I am sitting right next to wifi router and wifi in the notification area icon is visible full signal).

  In the last months, I tried various possible solutions, but none of them have solved this problem:

  -Updated to 8.1 windows

  -Update of the qualcomm network drivers

  -Stop of various applications that I think might have been the origin of the problem

  -Uninstall completely different applications

  -Close all anti-virus programs

  Still after all of these steps, the problem persists. It would not be a big problem, as the loss of connectivity is not permanent, but what makes multiplayer games completely unplayable on my alienware machine. :(

  Just today I tried to launch AlienAutopsy test for my network card in Killer Wireless - N 1103 several times, and each time that the "transfer of data verification test" failed due to no connectivity (all other tests passed very well, only this one test failure all 6 times). I thought that it could be linked and gave me some hope that I might be able to target the cause of this unique problem. Therefore, I post here. If anyone can help me, it would be much appreciated!

  +++ S.O.L.U.T.I.O.N. +++

  «Go to network-> Network and Sharing Center-> change the adapter settings-> Wireless - N 1103-> properties (right click) Killer network card-> and finally UNCHECK it (the f * cking) "Qualcomm Atheros control bandwidth «»

  Enjoy the rush.

  See you soon

• Strange Intermittent problem with LOV

  Hello
  
  I have a strange problem with the my LOV on one of my monitors. When I select a value of LOV(af:inputComboboxListOfValues) and released tab, it works fine. But if I copy and paste a text value that is also present in the LOV list data source, and then tab out then sometimes an exception is thrown.
  
  
  oracle.jbo.SQLStmtException: 27122 Houston: SQL error in the preparation of the statement. Instruction: SELECT / * + FIRST_ROWS * / * FROM QRSLT (SEPARATE FROM PROCESS_MASTER ORDER BY SOURCE_FILE_NAME SELECT 1) WHERE (((SOURCE_FILE_NAME COMME (REPLACE(REPLACE(REPLACE(:vc_temp_1,'\','\\'),'%','\%'),'_','\_') |))) ((('%') ESCAPE ' \')))
  
  
  Caused by: java.sql.SQLDataException: ORA-01424: missing or illegal character that follows the escape character
  
  I have ensured that the value pasted in the LOV is exactly the same present in the source data LOV.
  This problem is intermittent. It does not always come.
  The query looks fine for me and works perfectly in another system with the same configuration.
  
  Can there be a problem with a particular system?
  
  Same type of problem is mentioned in another post on the forum by a user
  ORA-01424 unexpected
  
  
  JDEV: Studio Edition Version 11.1.2.0.0
  Build JDEVADF_11.1.2.0.0_GENERIC_110531.1615.6017
  Oracle 11 g database
  
  
  Kind regards
  Naomie

  I raised a SR with support of oracle for this issue and come to know that it is actually caused by a bug (Bug No. 9524564) in RDBMS to Oracle 11.2.0.1 version. This bus has been fixed in the 11.2.0.2 Patch Set.
  The solution is either so, upgrade to the version of 11.2.0.1 to 11.2.0.2 RDBMS by applying patch set.
  or check with the workaround by disabling link furtively and in defining the "_fix_control" = 6163564: stop "as stated in the Bug 9524564.

  ALTER session set '_optim_peek_user_binds' = false;
  ALTER session set "_fix_control" = 6163564: off'

  Kind regards
  Naomie

• Failures/intermittent problems with Optiarc DVD +-RW AD - 5560 has

  I have an Inspiron 1720 laptop running Windows Vista. June 1 the DVD drive was declared missing. The Device Manager said "this device cannot start. Code 10. " Looking for solutions? "Could not load driver software. A chat with technical support solves the problem by taking control of my computer and do something in the system registry.

  Two weeks later I couldn't eject the CD that had just been snatched. Restart solved that problem.

  Today, the original problem described above reappeared.

  Technical support advised that, so that they can keep fixing these problems Dell will not replace the disc if the warranty does not expire until October.

  Everyone knows the same problem with this drive and what do I do to fix this?

  
  

• Ignition intermittent problem with Vostro 410

  Last week, I had a problem with my Vostro 410 minitower.

  When power is applied to the area of the Green LED on the back of the PSU and the amber LED on the main Board, both light up normally.

  By pressing the power button sometimes starts the system as usual, with the fixed blue light button, but more often all that happens is the button flashes amber and then nothing, except a slight noise as if a fan is about to begin.

  Remove the power and try again sometimes works, as leaving the box for a while after the first power of the application. The other thing that always work sends a message of WakeOnLAN since another device on my network. the PC starts and runs exactly as if the power button worked.

  Once started the PC boots and works perfectly as before.

  I tested the power supply and they are all to a few percent of their nominal values. Unplug the connector ATX 24 pin as well as a short circuit of the Green wire to Earth begins the PSU.

  I tried to change the on-board battery, but the problem is exactly the same with a new or partially charged battery or nothing at all.

  Can someone please suggest a cause and cure?

  

• problems with slide suspension

  Hello

  I use CP7. I have a slide that has a button (lets call this #1 button) to display a group of objects (TEBs, text boxes and 2 buttons) by using the 'show' action when you click it. The buttons that appear, button #2 hide all the graphics and the new TEBs (think... Close button) using 'Hide' as the action when you click it. The OTHER button that appears (#3 button) runs a fast action and seems to work as I want (with the exception of Captivate doing all the variables of text case sensitive which is a whole other debate...) Thus, the normal user workflow would be:

  Click on the #1 button to show additional TEBs and graphics and the two buttons

  Click the button #3 the assessment data in the TEBs

  The problem comes when learners do something like:

  Click on the #1 button to show additional TEBs and graphics and the two buttons

  Click the #2 button to close the graphics and everything and return to the main screen.

  What is happening is that when learners click on the #2 button, the slide plays to the end and then moves to the next slide. I need to stay on this slide the slide until the learner clicks on the 'next' button I tried the following:

  Place a button in the extreme corner with an action of break at 0, 1-0, 3 seconds

  placing the pause of the actions on the other buttons (including the buttons mentioned here and others

  Moving an action to break in the advanced action triggered at the event slide OnEnter

  Moving an action to break for the event onExit on the slide

  Place a "No Action" on the "OnExit" even action for the slide.

  Addition of several actions to break at different intervals break for keys shown

  No idea why I can't get the slide to remain on the slide (not go to the next slide)? I really just need to toggle the visibility of the TEB group and graphics without impact on the timeline at all. Ideas?

  Why choose Standard Simple action? -Captivate Blog

  By design, a simple action (I think you use a simple action?) will also head out of reading. Not sure, because you don't specify, but I guess you group and just hide the group.

  If I'm not mistaken, replace this simple action by a standard tip action diagram.

• Problem with slide

  Hi, I use a slide action script code. The problem is that when a small image is loaded, one stays behind to a big more. Perhaps what is happening with all slides but is visible in loading a smaller... What could be done? The code is:

  Import Tweener
  Import caurina.transitions.Tweener;

  delay between slides
  const TIMER_DELAY:int = 5000;
  time between slides to fade
  const FADE_TIME:Number = 1;

  indicator for whether the slideshow is
  var bolPlaying:Boolean = true;
  reference to the current container of the cursor
  var currentContainer:Sprite;
  the index of the current slide
  var intCurrentSlide:int = - 1;
  slides total
  var intSlideCount:int;
  timer for switching slides
  var slideTimer:Timer;
  slide holder
  var sprContainer1:Sprite;
  var sprContainer2:Sprite;
  slide feeder
  var slideLoader:Loader;
  current slide link
  var strLink:String = "";
  the current slide link target
  var strTarget:String = "";
  URL to slideshow xml
  var strXMLPath:String = 'slideshow-"Data.xml". "
  Slideshow xml loader
  var xmlLoader:URLLoader;
  Slideshow xml
  var xmlSlideshow:XML;

  function initSlideshow (): void {}
  hide the buttons, labels and link
  mcInfo.visible = false;
  btnLink.visible = false;
  
  create new urlloader for xml file
  xmlLoader = new URLLoader();
  Add listener for the complete event
  xmlLoader.addEventListener (Event.COMPLETE, onXMLLoadComplete);
  load the xml file
  xmlLoader.load (new URLRequest (strXMLPath));
  
  create a new timer with time constant
  slideTimer = new Timer (TIMER_DELAY);
  Add the event listener for the timer event
  slideTimer.addEventListener (TimerEvent.TIMER, nextSlide);
  
  create 2 sprite container that will hold the slides and
  Add them to the masked movieclip
  sprContainer1 = new Sprite();
  sprContainer2 = new Sprite();
  mcSlideHolder.addChild (sprContainer1);
  mcSlideHolder.addChild (sprContainer2);
  
  keep a reference of the container which is currently
  at the front
  currentContainer = sprContainer2;
  
  Add listeners to events for the buttons
  btnLink.addEventListener (MouseEvent.CLICK, goToWebsite);
  mcInfo.btnNext.addEventListener (MouseEvent.CLICK, nextSlide);
  mcInfo.btnPrevious.addEventListener (MouseEvent.CLICK, previousSlide);
  }
  
  function onXMLLoadComplete(e:Event):void {}
  display buttons, labels, and link
  mcInfo.visible = true;
  btnLink.visible = true;
  
  create new code xml with the data received
  xmlSlideshow = new XML (e.target.data);
  get the total number of slides
  intSlideCount = xmlSlideshow... image.length ();
  spend the first slide without a delay
  switchSlide (0);
  }
  
  function fadeSlideIn(e:Event):void {}
  Add loaded slide charger slide to the
  in the current container
  addSlideContent();
  
  fade the current container and start the timer for slides
  When the Tween is finished
  Tweener.addTween (currentContainer, {alpha: 1, time: FADE_TIME, onComplete:onSlideFadeIn});})
  }

  function onSlideFadeIn (): void {}
  check, if the slide show is underway
  If so, start the timer
  If (bolPlaying & &! slideTimer.running)
  slideTimer.start ();
  }

  function switchSlide(intSlide:int):void {}
  check if the last slide is still discoloration
  If (!.) {Tweener.isTweening (currentContainer))}
  check if the timer is running (necessary for the)
  first switch on the slide)
  If (slideTimer.Running)
  slideTimer.stop ();
  
  change the slide index
  intCurrentSlide = intSlide;
  
  Check what container is currently in the front and
  Assign currentContainer to one that is in the back with
  the old slide
  if(currentContainer == sprContainer2)
  currentContainer = sprContainer1;
  on the other
  currentContainer = sprContainer2;
  
  hide the old slide
  currentContainer.alpha = 0;
  wear the old blade at the front
  mcSlideHolder.swapChildren (sprContainer2, sprContainer1);
  
  remove the loaded content
  clearLoader();
  
  Create a new loader for the slide
  slideLoader = new Loader();
  Add the event listener when slide loading
  slideLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, fadeSlideIn);
  loading of the next slide
  slideLoader.load (new URLRequest (xmlSlideshow.. image[intCurrentSlide].@SRC));
  
  See the description of the next slide
  mcInfo.lbl_description.text = xmlSlideshow... image[intCurrentSlide].@title;
  
  set the link and the slide binding target variable
  strLink = xmlSlideshow... image[intCurrentSlide].@Link;
  strTarget = xmlSlideshow... image[intCurrentSlide].@Target;
  mcInfo.mcDescription.lbl_description.htmlText = xmlSlideshow... image[intCurrentSlide].@desc;
  
  See the active and total slide slide
  mcInfo.lbl_count.text = (intCurrentSlide + 1);
  }
  }

  function goToWebsite(e:MouseEvent):void {}
  Check if the strLink isn't empty and open the link in the
  defined target window
  If (strLink! = "" & & strLink!) = null) {}
  navigateToURL (new URLRequest (strLink), strTarget);
  }
  }

  function nextSlide(e:Event_=_null):void {}
  check, if there is no slide to the left, in the affirmative, increment slide
  index
  If (intCurrentSlide + 1 < intSlideCount)
  switchSlide (intCurrentSlide + 1);
  Otherwise, start the slide show from beginning
  on the other
  switchSlide (0);

  }

  function previousSlide(e:Event_=_null):void {}
  check, if there is no slide to the left, in the affirmative, decrement slide
  index
  If (intCurrentSlide - 1 > = 0)
  switchSlide (intCurrentSlide - 1);
  Otherwise, start the slide show on the last slide
  on the other
  switchSlide (intSlideCount - 1);
  }

  function clearLoader (): void {}
  try {}
  get the info loader object
  var li: LoaderInfo = slideLoader.contentLoaderInfo;
  check if the content is bitmap and delete
  If (li.childAllowsParent & & li.content is Bitmap) {}
  (li.content as Bitmap).bitmapData.dispose ();
  }
  } catch(e:*) {}
  }

  function addSlideContent (): void {}
  empty the current slide and remove previous bitmap
  While (currentContainer.numChildren) {bitmap (currentContainer.getChildAt (0)).bitmapData.dis pose(); currentContainer.removeChildAt (0) ;}}

  create a new bitmap with the contents of cursor, clone and add it to the slider container
  var bitMp:Bitmap = new Bitmap (Bitmap (slideLoader.contentLoaderInfo.content).bitmapData.clone ());
  currentContainer.addChild (bitMp);
  }

  slideshow of init
  initSlideshow();

  use:

  Import Tweener
  Import caurina.transitions.Tweener;
  import flash.display.Sprite;

  delay between slides
  const TIMER_DELAY:int = 5000;
  time between slides to fade
  const FADE_TIME:Number = 1;

  indicator for whether the slideshow is
  var bolPlaying:Boolean = true;
  reference to the current container of the cursor
  var currentContainer:Sprite;
  the index of the current slide
  var previousContainer:Sprite;
  var intCurrentSlide:int = - 1;
  slides total
  var intSlideCount:int;
  timer for switching slides
  var slideTimer:Timer;
  slide holder
  var sprContainer1:Sprite;
  var sprContainer2:Sprite;
  slide feeder
  var slideLoader:Loader;
  current slide link
  var strLink:String = "";
  the current slide link target
  var strTarget:String = "";
  URL to slideshow xml
  var strXMLPath:String = 'slideshow-"Data.xml". "
  Slideshow xml loader
  var xmlLoader:URLLoader;
  Slideshow xml
  var xmlSlideshow:XML;

  function initSlideshow (): void {}
  hide the buttons, labels and link
  mcInfo.visible = false;
  btnLink.visible = false;
    
  create new urlloader for xml file
  xmlLoader = new URLLoader();
  Add listener for the complete event
  xmlLoader.addEventListener (Event.COMPLETE, onXMLLoadComplete);
  load the xml file
  xmlLoader.load (new URLRequest (strXMLPath));
    
  create a new timer with time constant
  slideTimer = new Timer (TIMER_DELAY);
  Add the event listener for the timer event

  
  slideTimer.addEventListener (TimerEvent.TIMER, nextSlide);
    
  create 2 sprite container that will hold the slides and
  Add them to the masked movieclip
  sprContainer1 = new Sprite();
  sprContainer2 = new Sprite();
  mcSlideHolder.addChild (sprContainer1);
  mcSlideHolder.addChild (sprContainer2);
    
  keep a reference of the container which is currently
  at the front
  currentContainer = sprContainer2;
    
  Add listeners to events for the buttons
  btnLink.addEventListener (MouseEvent.CLICK, goToWebsite);
  mcInfo.btnNext.addEventListener (MouseEvent.CLICK, nextSlide);
  mcInfo.btnPrevious.addEventListener (MouseEvent.CLICK, previousSlide);
  }
    
  function onXMLLoadComplete(e:Event):void {}
  display buttons, labels, and link
  mcInfo.visible = true;
  btnLink.visible = true;
    
  create new code xml with the data received
  xmlSlideshow = new XML (e.target.data);
  get the total number of slides
  intSlideCount = xmlSlideshow... image.length ();
  spend the first slide without a delay
  switchSlide (0);
  }
    
  function fadeSlideIn(e:Event):void {}
  Add loaded slide charger slide to the
  in the current container
  addSlideContent();
  fadeSlideOut();
  fade the current container and start the timer for slides
  When the Tween is finished
  Tweener.addTween (currentContainer, {alpha: 1, time: FADE_TIME, onComplete:onSlideFadeIn});})
  }
  function fadeSlideOut (): void {}
  Tweener.addTween (previousContainer, {alpha: 0, time: FADE_TIME});
  }
  

  function onSlideFadeIn (): void {}
  check, if the slide show is underway
  If so, start the timer
  If (bolPlaying &! slideTimer.running)
  slideTimer.start ();
  }

  function switchSlide(intSlide:int):void {}
  check if the last slide is still discoloration
  If (!.) {Tweener.isTweening (currentContainer))}
  check if the timer is running (necessary for the)
  first switch on the slide)
  If (slideTimer.Running)
  slideTimer.stop ();
        
  change the slide index
  intCurrentSlide = intSlide;
        
  Check what container is currently in the front and
  Assign currentContainer to one that is in the back with
  the old slide
         previousContainer = currentContainer;
  if(currentContainer == sprContainer2)
  currentContainer = sprContainer1;
  on the other
  currentContainer = sprContainer2;
        
  hide the old slide
  currentContainer.alpha = 0;
  wear the old blade at the front
  mcSlideHolder.swapChildren (sprContainer2, sprContainer1);
        
  remove the loaded content
  clearLoader();
        
  Create a new loader for the slide
  slideLoader = new Loader();
  Add the event listener when slide loading
  slideLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, fadeSlideIn);
  loading of the next slide
  slideLoader.load (new URLRequest (xmlSlideshow.. image[intCurrentSlide].@SRC));
        
  See the description of the next slide
  mcInfo.lbl_description.text = xmlSlideshow... image[intCurrentSlide].@title;
        
  set the link and the slide binding target variable
  strLink = xmlSlideshow... image[intCurrentSlide].@Link;
  strTarget = xmlSlideshow... image[intCurrentSlide].@Target;
  mcInfo.mcDescription.lbl_description.htmlText = xmlSlideshow... image[intCurrentSlide].@desc;
        
  See the active and total slide slide
  mcInfo.lbl_count.text = (intCurrentSlide + 1);
  }
  }

  function goToWebsite(e:MouseEvent):void {}
  Check if the strLink isn't empty and open the link in the
  defined target window
  If (strLink! = "" & strLink!) = null) {}
  navigateToURL (new URLRequest (strLink), strTarget);
  }
  }

  function nextSlide(e:Event_=_null):void {}
  check, if there is no slide to the left, in the affirmative, increment slide
  index
  if(intCurrentSlide + 1)<>
  switchSlide (intCurrentSlide + 1);
  Otherwise, start the slide show from beginning
  on the other
  switchSlide (0);

  }

  function previousSlide(e:Event_=_null):void {}
  check, if there is no slide to the left, in the affirmative, decrement slide
  index
  If (intCurrentSlide - 1 > = 0)
  switchSlide (intCurrentSlide - 1);
  Otherwise, start the slide show on the last slide
  on the other
  switchSlide (intSlideCount - 1);
  }

  function clearLoader (): void {}
  try {}
  get the info loader object
  var li: LoaderInfo = slideLoader.contentLoaderInfo;
  check if the content is bitmap and delete
  If (li.childAllowsParent & li.content is Bitmap) {}
  (li.content as Bitmap).bitmapData.dispose ();
  }
  } catch(e:*) {}
  }

  function addSlideContent (): void {}
  empty the current slide and remove previous bitmap
  While (currentContainer.numChildren) {bitmap (currentContainer.getChildAt (0)) .bitm () apData.dispose; currentContainer.removeChildAt (0) ;}}

  create a new bitmap with the contents of cursor, clone and add it to the slider container
  var bitMp:Bitmap = new Bitmap (Bitmap (slideLoader.contentLoaderInfo.content).bitmapData.clone ());
  currentContainer.addChild (bitMp);
  }

  slideshow of init
  initSlideshow();