Strange Intermittent problem with LOV

Similar Questions

• Strange intermittent problem with macbook pro

  Hey there ppl.

  So, I have a Macbook Pro (15-inch, mid-2014, retina), processor i7 2.2 GHz, 16 GB of memory. Running OS X El Capitan.

  My problem is a strange, because it is only intermittently. ID say like 10-15% of the time. But its very frustrating and annoying when it does and because I am working on my computer (poker), it's also costing me. in any case, the problem usually occurs after I've been using the computer for 1, 5-3 hours or more. Usually ill be playing poker online, listen to spotify and use of the internet for stuff randomly. Everything will be fine and then suddenly ill notice that my mouse cursor will be suddenly shot through the screen occasionally. as ill be goes well with the cursor but it'll jump to the left, a couple of inches or more. Also bad note that some of my habit of 'clicks' record, so ill use the calculator for example and badly want to press 543 and maybe 5 records, but when I go to click on the 4 it does not work, and ill have to like wait a second, then click New to register the click.

  Also, if im typing something, as in poker, I have sometimes to take note of the way in which an opponent has played a helping hand or whatever, a letter or a space press custom register, so ill be typing a phrase and the space bar is and I'll have to press the key once the couple , then a letter will not register, etc.. Sound very disorienting and made it difficult to continue the task IM because it does not smoothly because of the LAG, unregistered, mouse jumping, etc.

  IM really not sure of what the root of the problem and what it is. Ive has run the malware anti-malware bytes, but that has not solved the problem. Usually when that happens ill try to restart the computer, or stop and return back but generally the problem persists. Then, after some time, maybe 20 to 45 minutes or so, when I try to use the computer it works normally with any of these problems.

  Very bizzare. Any help or insight is appreciated, let me know if you need more information

  Brandon

  Good afternoon brandonfrommililani,.

  Thanks for letting us know about the problem you are having with your cursor jumps erratically on the screen of your MacBook Pro.  The resources below provides some initial troubleshooting steps, you can try at this address.  I suppose that you work with the trackpad on your MacBook Pro.  In addition to the steps suggested below, try to connect a wired mouse to your computer to exclude Wireless interference.

  If your pointer is nervous when you use a trackpad, Magic Mouse or Magic Trackpad

  Best,

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• Intermittent problem with IE8

  Using XP Prof SP3. When the computer is turned on for a while IE8 does not connect with the router. Firefox, Outlook and other programs work OK. If I reboot computer IE8 OK still once, after maybe an hour or two of IE8 doesn't is not the same problem came back

  Hi Sean,.

  I see you have some intermittent problems with internet Explorer 8. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the brand and model of the router?

  Method 1.

  How to troubleshoot possible causes of problems of Internet access in Windows XP: http://support.microsoft.com/kb/314095

  Method 2.

  Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab2

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• Only intermittent problem with wifi on alienware m17x with qualcomm wireless killer

  Hi, I have an alienware M17x with windows 8.1 and qualcomm wireless killer. I have a serious problem with intermittent wifi, that appears when I use programs like Skype, steam, multiplayer games, etc.

  Even if the wifi is connected, the connection suddenly stops working sometimes, especially when I use the applications mentioned above. (if I try to load a Web page during this time, the page remains attached to "resolving host"). Strange thing is if I disconnect and reconnect to the wifi Internet starts working immediately. Or I can wait a few minutes and the connection is re-established automatically. This isn't a problem with the network, because I had this problem on countless wifi networks I've worked, and all my other devices work fine in the same time, that my laptop no longer works.

  Additionally, this problem occurs only on wifi, if I use a connection cable, this never happens. (this is not yet a case of the wifi signal strength, as happens even when I am sitting right next to wifi router and wifi in the notification area icon is visible full signal).

  In the last months, I tried various possible solutions, but none of them have solved this problem:

  -Updated to 8.1 windows

  -Update of the qualcomm network drivers

  -Stop of various applications that I think might have been the origin of the problem

  -Uninstall completely different applications

  -Close all anti-virus programs

  Still after all of these steps, the problem persists. It would not be a big problem, as the loss of connectivity is not permanent, but what makes multiplayer games completely unplayable on my alienware machine. :(

  Just today I tried to launch AlienAutopsy test for my network card in Killer Wireless - N 1103 several times, and each time that the "transfer of data verification test" failed due to no connectivity (all other tests passed very well, only this one test failure all 6 times). I thought that it could be linked and gave me some hope that I might be able to target the cause of this unique problem. Therefore, I post here. If anyone can help me, it would be much appreciated!

  +++ S.O.L.U.T.I.O.N. +++

  «Go to network-> Network and Sharing Center-> change the adapter settings-> Wireless - N 1103-> properties (right click) Killer network card-> and finally UNCHECK it (the f * cking) "Qualcomm Atheros control bandwidth «»

  Enjoy the rush.

  See you soon

• Strange sound problem with Satellite L740 TV outputs

  I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

  I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

  There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
  The first is mine, and I can get sound through the TV very well when I plug it in.

  Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

  More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

  This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

  It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

  * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

  It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

  Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

  In the worst case you have to do it manually in the sound properties > playback devices.
  If it works with four mouse clicks you can change.

  I tested my laptop with two different TVs.
  At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

  If you will be able to find the solution please let us know.

• HP Color LaserJet CP2025: Intermittent problem with printer producing pink wide unslightly strips

  I use a HP ColorLaserJet CP2015.  From time to time he overprinted documents with pink ribbons which is unslightly.  The documents can be used only for use in-house.

  It is an intermittent problem and may occur as early as the beginning of printing or begin in the middle of a print job.

  I ran a diagnostic report, but I do not know how to interpret it.

  Any suggestions?

  Thank you

  Alan

  P.S. I'm sure that the printer is out of warranty.

  Just thought that I'll let you know that so far I did not have pink wide overprinting.  It seems that it was a faulty cartridge.  Thank you very much. I would not have thought this.

• Strange layout problems with HFM 11.1.2.2.

  Dear all,

  I deal with very strange provision / security with HFM 11.1.2.2 issues.

  Available /: of security issues

  We have configured MSAD (4 groups) with Shared Services and put into service groups, up to week last, everything works fine without any problems.

  We have a few end users issue tickets, claiming that "they can't see any screen HFM of workspace, by default, it will show the tab extracted without any content. I check the supply and security for the corresponding user class, everything goes well without any problems.

  I created a few user tests and provided equal rights according to the users above, I can able to see everything (Super admin) even though I configured only for 'Default', "Advanced user" with limited security category.

  Decree AD Shared Services:

  (1) native directory

  (2) SS1 - Supreme users - 3

  (3) SS2 - power - 6 users

  (4) SS3 - intermediate - 10 users

  (5) SS4 - end-users - 250 +.

  I changed the order of SS4 2nd and restarted services, yet we face the same problems.

  Could you please guide me or suggest.

  Thank you

  PC

  Hi all

  Problem has been resolved.

  Solution:

  By default, it shows the last screen accessible to the particular user, some time, we have removed this provision of the user. That is causing the problem. Later we consulted a few other screen and close the session and the provision of equal rights. It works fine now.

  Thank you

  PC

• Problem with LOV in form

  Hi friends,
  I have a particular problem with the LOVs in forms.
  
  I have two blocks A and B. Block A, I have a couple of items I1 and I2 who LOVS and the two elements are required. When we choose I1 I2 is met as well. The value in the I2 is perfectly valid. Both have the property of "Validate elements in the list" No..
  
  However when I go to the next block B after selecting the value of I2 I1 is removed (I1 is not deleted) and the cursor returns to I2 since it is mandatory. I select the value of I2 again, and then when I get back to block B it works. There are only two values that get populated I1 and I2.
  
  I'm working on Oracle Forms 10g. Version of the suite ebiz is 12.1.3
  
  Can someone help how to solve this problem.
  
  Thank you

  Hello

  First thing, you have two block A and B and four other field.

  In the affirmative.

  Second thing, if it is a parameter dependent for example if you select provider of L1 and L2 Supplier site name is filled...

  Third thing, you need to check how much LOV you created for this four Fields.If, you two created his evil. Create four different LOV and attach to the fields and check if it works now.

  Thank you & best regards
  Srikkanth.M

• Problem with LOV Switcher

  11.1.1.2 ADF + ADF BC
  
  Hello
  
  I have a problem with the list of switch values, missing a piece of the puzzle
  
  In the object view I have:
  
  a notation attribute that has 2 lov defined for it - lov_a and lov_b
  a Type attribute which can have a value of 1,2,3,4 or 5
  a passenger attribure LovToUse which has the following expression: Type == 3? 'lov_a': 'lov_b '.
  
  In other words if the Type is 3 I would like lov_a to show otherwise, I want lov_b.
  
  I created an a jspx to edit and change the data in my view object.
  
  The attributes and the Type are on the jspx.
  Type is an autosubmit and side has a partial trigger on Type
  
  The idea is that when the user changes the Type via the user interface rating will change his lov depending on the Type.
  
  The problem I have is that when Type is changed to note without changing his lov because I guess the LovToUse attribute is not updated / refreshed.
  
  How to refresh LovToUse when Type is changed through the user interface and that is all I have to do to get note to use the correct lov?
  
  Concerning
  Paul

  You may forget to set the dependency of your attribute LovToUse.

  Check this box:
  http://adfpractice-Fedor.blogspot.com/2011/02/ADF-BC-multiple-lovs-for-Vos-attribute.html

• Problem with LOV in Oracle forms 10g when running on the Web

  Dear
  
  I am facing problem in displaying LOV under Oracle developer 10g on the web.
  When I press F9 nothing appears on the screen, but in the taskbar, it displays a list of values.
  The query I used in the record group executed in SQL * more and it is there no problem with him.
  What all I need to do, pls help me to solve the problem.
  
  Thank you

  Hello

  You are welcome. :)

  whenever the issue is resolved, please mark it as correct and useful so that others may know what is the correct answer.
  and take a look at the Label of Forums

  Kind regards

  Manu.

• Failures/intermittent problems with Optiarc DVD +-RW AD - 5560 has

  I have an Inspiron 1720 laptop running Windows Vista. June 1 the DVD drive was declared missing. The Device Manager said "this device cannot start. Code 10. " Looking for solutions? "Could not load driver software. A chat with technical support solves the problem by taking control of my computer and do something in the system registry.

  Two weeks later I couldn't eject the CD that had just been snatched. Restart solved that problem.

  Today, the original problem described above reappeared.

  Technical support advised that, so that they can keep fixing these problems Dell will not replace the disc if the warranty does not expire until October.

  Everyone knows the same problem with this drive and what do I do to fix this?

  
  

• Ignition intermittent problem with Vostro 410

  Last week, I had a problem with my Vostro 410 minitower.

  When power is applied to the area of the Green LED on the back of the PSU and the amber LED on the main Board, both light up normally.

  By pressing the power button sometimes starts the system as usual, with the fixed blue light button, but more often all that happens is the button flashes amber and then nothing, except a slight noise as if a fan is about to begin.

  Remove the power and try again sometimes works, as leaving the box for a while after the first power of the application. The other thing that always work sends a message of WakeOnLAN since another device on my network. the PC starts and runs exactly as if the power button worked.

  Once started the PC boots and works perfectly as before.

  I tested the power supply and they are all to a few percent of their nominal values. Unplug the connector ATX 24 pin as well as a short circuit of the Green wire to Earth begins the PSU.

  I tried to change the on-board battery, but the problem is exactly the same with a new or partially charged battery or nothing at all.

  Can someone please suggest a cause and cure?