Internal SD card reader does not recognize SD card

Similar Questions

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• Card reader does not recognize the card when inserted

  original title: card reader problems.

  I have a laptop Acer TravelMate, there is a map on the side drive. I also have a Panasonic Lumix digital camera. problem is when I insert the camera card into the slot on the laptop, there is nothing.  my 1st thought being that I need to download and install a card reader driver. I've done that now, but still nothing.
  I just wonder, being a technophobe (not computer smart), unless im missing something here that is obvious to people who are more experienced.
  Any help would be appreciated

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ========================================================

  If you can not get the card reader to work, it can be replaced or an external card reader is not
  Dear.

  They go bad sometimes. Try these:

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - do use the port USB is enabled.

  -----------------------------------------------------------------------------------------------------------------------

  Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
  Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
  following the UNINSTALL.

  Now bring the controllers USB - right click - UNINSTALL everything in category one at time EXCEPT
  the category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as
  Although all USB devices that you previously used. Run Options and check the 1st three choices to
  see if one is there. You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
  drivers.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope that helps.

• Why my fingerprint reader does not recognize login screen?

  I have a Microsoft Fingerprint Reader and it uses the Digital Persona 2.0 software and until recently was working properly.

  Lately I can save a print, the newspaper on my desk and programs such as Yahoo IM and others, but when I try to set up a newspaper in a Web site, I get the error message that "this is NOT a login screen and...» "when there IS a login screen and the software no longer recognizes as such.

  I am running Windows XP Pro 32-bit and hope someone has an idea...

  Thanks for any help.

  Chuck

  You would be correct, here. All things FP drive at high level would probably go only in Internet Explorer. I used to prefer Mozilla's Firefox, but last month I switched to Google Chrome and Google Sync does not require a hardware key.

• Adobe Reader does not recognize my internet connection.

  When I open a file in the drive and go to my account Adobe and start the conversion of file I get the error message "Not connected to the internet", but I am connected.  What should I do?

  Hi Dan,.

  Disable any active Anti virus or firewall that could block internet access to Adobe Reader.

  Kind regards
  Rahul

• e reader does not recognize the drive

  Tried the new drive and still no response

  Try the drive on another computer that has a good player.

  Tom

• 700 - 509nb envy: envy of 700-509nb: card reader is not recognize SDHC cards more

  After working for more than 1 year, today the card reader does not recognize SDHC cards more.

  He does it with Compact Flash cards.

  When the suspension on the device with a USB cable, the photo can be downloaded.

  Strange... someone at - it an idea?

  Simple but more obvious solution: a small card reader...

  Thank you!

• When I put a disc in my drive to download the reader program does not recognize it.

  D: drive does not

  for some reason when I put a disc in my drive to download a program, the reader does not recognize, I go to my computer and the folder is empty, it seems he does not see the drive, but really don't know if my disc is bad because I can put a movie into the drive, and the film plays , its been like this for a few months and I would like to avoid a system restore since then I downloaded a few programs on the web, so I was wondering if it could be a setting or something.

  for some reason when I put a disc in my drive to download a program, the reader does not recognize, I go to my computer and the folder is empty, it seems he does not see the drive, but really don't know if my disc is bad because I can put a movie into the drive, and the film plays , its been like this for a few months and I would like to avoid a system restore since then I downloaded a few programs on the web, so I was wondering if it could be a setting or something.

  Wow - that was a whole sentence, huh?

  Are the applications that you are trying to install from the CD or DVD drive?  If they are all CD, a CD of MUSIC playing when inserted?  If this is not the case - it could be your laser CD came out, but your DVD laser works very well.

• Tecra M9 does not recognize the SDHC 4 GB

  Tecra M9, Windows XP

  The internal card reader does not recognize the SDHC 4 GB (provider: "extreme memory"), being inserted in camera or PNA not connected via USB, no problem to read or write to the card.
  No idea how to get the card to work with this card reader?

  Hello

  I have an idea.
  I think that the SDHC 4 GB card is not recognized because a Microsoft patch is not installed on your XP operating system.

  Microsoft has released this document which should help you to solve this problem:

  [Hotfix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards | http://support.microsoft.com/kb/934428]

  Good bye

• I just installed Windows 7 and it does not recognize my HP2009m monitor speakers.

  I just installed Windows 7 from Win XP on my desktop that is connected to a HP2009m monitor with internal speakers. Win7 does not recognize that the speakers are connected, so I have no sound. How can I get Win7 to recognize speakers monitors? I need drivers? I have download the drivers for the monitor get Win7 recognize correctly.

  Thank you - that was where my thinking was going as the solution too - an I updated the video drivers, the sound started working!

• Satellite M40X: Internal card reader does not work

  My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

  Thank you!

  Can you please check the Device Manager and tell us if any unknown device is listed there?

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.