700 - 509nb envy: envy of 700-509nb: card reader is not recognize SDHC cards more

Similar Questions

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• Windows XP update to sp3 does not recognize SDHC cards

  I can't get my computer to recognize SDHC cards (4 GB) media (tried using two different drives, which work on a different PC) after reformatting hard drive and a reinstallation of Windows XP that I have fully updated to SP3 before trying to use the multimedia card (this count and the reader can read the SDHC cards before). When I try to install the 923293 hotfix it says that it to an older version (SP2)

  Hello
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/kb/314634

  Also check out this link:
  http://support.Microsoft.com/kb/310575

  It will be useful.

• Internal SD card reader does not recognize SD card

  I have an internal SD card reader I have ever used before.  I am trying to download pictures from an sd card that I used on my desktop and it works fine, but when I insert in my laptop nothing happens. I went to start / my computer and there is no driver does not list other than my cd/dvd driver. How can I fix it?

  Mini SD cards and adapters are the hassle that I connect
  my phone with a USB cable for uploading photos.

  In any case...

  The card reader should not require no installation. If this is not
  recognized, it can be fried or it is possible, there could be a
  loose connection inside the housing.

  Watch the following video tutorial:

  Install the media player.
  http://www.YouTube.com/watch?v=_LWrxN6W5Bc

• Card reader does not recognize the card when inserted

  original title: card reader problems.

  I have a laptop Acer TravelMate, there is a map on the side drive. I also have a Panasonic Lumix digital camera. problem is when I insert the camera card into the slot on the laptop, there is nothing.  my 1st thought being that I need to download and install a card reader driver. I've done that now, but still nothing.
  I just wonder, being a technophobe (not computer smart), unless im missing something here that is obvious to people who are more experienced.
  Any help would be appreciated

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ========================================================

  If you can not get the card reader to work, it can be replaced or an external card reader is not
  Dear.

  They go bad sometimes. Try these:

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - do use the port USB is enabled.

  -----------------------------------------------------------------------------------------------------------------------

  Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
  Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
  following the UNINSTALL.

  Now bring the controllers USB - right click - UNINSTALL everything in category one at time EXCEPT
  the category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as
  Although all USB devices that you previously used. Run Options and check the 1st three choices to
  see if one is there. You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
  drivers.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hope that helps.

• My desktop under Vista 32 built in the card reader for SD cards. It does not recognize SDHC cards. Can I make this happen?

  Y at - it an update or a patch that will leave my built in player of card that was installed to SD cards that will recognize SDHC cards? I am running Windows Vista Home Premium on a Lenovo desktop computer.

  Hi slider638,

  You can see the steps in the link of Lenovo below

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/SD-card-reader-and-SDHC-card-compatibility/Ta-p/238582

  Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• T400s 5-1 card reader MicroSD not recognize!

  I have problems with my T400s does not not not my MicroSD card. When I bought the laptop 2 months ago, so I chose the option of card reader 5-1 instead of the ExpressCard34. It was read just fine, including my SDHC 16 GB that I use for my camera and MicroSD 2 GB / 4 GB for NDS my sister.

  But today, I tried to add files to the MicroSD card and the computer does not recognize the MicroSD cards more. When I plug the adapter into the card reader, it has even not the answer, as if the MicroSD card is not even inserted in the adapter. I have several different cards and MicroSD cards of different size and none of the combinations of them worked. The drive still reads normal SD cards very well.

  It's very strange because he was working a few weeks ago and now it doesn't recognize NO MicroSD cards with the help of adapters. I tried restarting the computer and made sure that it is the latest driver but nothing new happened.

  What is going on? I paid the great fortunes for this laptop and he is already giving me so many problems after 2 months of use. Does anyone have a solution for this?

  Exactly the same problem that happened with me. I've just disabled the device in Device Manager and then allow him again. And after that, it worked.

• HP Envy 15 - q47002 i7: laptop overheating, does not recognize any USB. Even in the Bios.

  Hello

  I bought this product last year, so my warranty wore off.

  My laptop is overheating and it is very slow at this point (even videos are not working well). I tried to clean it up but it was without result.  I want the game and computationally intensive applications, but I'm afraid of the motherboard or hard drive failure.

  Now to the point. I can't install the new OS, any OS because this laptop doesn't have a DVD player and it doesn't recognize any usb 2.0 or 3.0.  I tried to change the options in the Bios and I tried to uninstall and install the drivers (they are up to date).

  What should I do? I can't install a new system because of this problem, and I can't use anything more demanding than youtube which is really annoying since this laptop has good specifications.

  I am currently running Windows 8.1 which I got when I made a purchase.

  I hope someone answers!

  Thank you.

  EDIT: In the Device Manager it says device not installed with yellow exclamation point. By Usb or ext hdd. And it will not find the device-specific drivers. As I never need them on another PC or laptop.

  Hi @HarunC,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP ENVY 15 t-4710HQ i7 Quad Core Notebook and questions with serveral fuctions works do not. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  With the USB not recognized by Windows.  Here is a link to solve the USB connections.

  I would like to uninstall everything cited first in the list of universal serial bus controllers.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link if you need to download drivers USB Intel for Windows. This is a utility to update.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• HP Envy 4500: Mac running El Capitan will not recognize the HP Envy 4500 printer more

  Last week I was able to print to my HP Envy 4500 to my MacBook Air and MacBook Pro, both running El Capitan.  However, when I went to print today, no computer cannot find my printer.

  I tried everything I found on these forums of discussion... the network reset, feeding all turned off, turning off iPv6, etc. anything.

  I have a USB cord used to print today and when I went in the connected USB printer utility, I could select Configure the wireless, but again, make the message: not accessible device.  It notes the wireless network, the settings were downloaded successfully on my device, however, your Mac could not locate the device on the network.   My Mac is both connected to the same wireless network.

  Help!

  Hello

  I restart your Mac and try the above steps again - if it does not prove successful, I then reboot your router and repeat the steps.

• ENVY dv7-7201sa Finger Print Reader does not work

  The fingerprint reader has stopped working. Before, I thought I had genuine driver installed, now there is driver driver. Not sure how it happened.

  I uninstalled the driver drivers and pass SImple, but the single pass software download link is no longer available, what are the correct drivers, and where are they

  Thank you

  Tony,

  If you tell the AuthenTec link for the 6.0.100.620 old version of HP SimplePass, it is probably closed.  AuthenTec has been picked up by Apple last year, and they are «not more»  The drivers are still in the area - the name depends on the original software / driver source code.

  For Windows 8:

  Your valid driver - download and install not yet:

  sp58900 validity sensor V4.4.234.0 Win8

  Reference: ENVY HP dv7-7201sa Notebook PC drivers

  Instructions for installing the driver and HP SimplePass later that works on Windows 7 or Windows 8 are in the following file.

  Find, open, and follow the procedure described in the file named: simple instructions for upgrade HP SimplePass

• Envy 15-ah150na: create recovery media - does not recognize a 32GB kingston generation 3 data traveler flash drive

  Hello

  I have tried to create recovery media on a clean formatted FAT32 drive Kingstone (32 GB 3 generation) flash and keep giving me the message that the flash drive has insufficient free space.

  Tried after formatting the 32 GB again and the same message, tried the NTFS file system and still the same.

  Pending a solution please. Thank you very much.

  Best wishes

  LF

  Official response with the support of HP on twitter:

  Try to use the tool of media recovery. http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive. The USB has a boot device.

  .. who has worked on the same USB stick 32 GB .  BUT it is not the same as in the HP Recovery Manager.

  Don't bother more. I accept the foregoing as a solution.

  Good luck with users who have this laptop. Also issues with the network adapter to which I am trying to fix at the moment.

• HP envy 4520: unable to complete printer does not recognize UK

  problems trying to complete registration. Default country is to the United States and no option to change in the uk and so code postal uk is rejected. How can I continue?

  Thank you. I bought it on Amazon UK. I managed to skirt around the problem I think and can print now.

• Envy 15 t-j100 card reader does not

  I have a HP ENVY 15 t-j100 Quad Edition running Windows 7. His card reader does not work. When I insert an SD card, I get a message that the device is not installed correctly. Windows prompts you to update me the driver, so I let him, but he can't find the driver. In devices with SD card inserted, Manager it shows a symbol in the "Other devices" section "hard drive"with a yellow "!"  The State of the device reads:

  "The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver. »

  I tried to update the driver from there, but still no driver is reported to be found.

  Furthermore, Device Manager indicates that the Realtek PCIE card reader works properly. I updated the driver using sp66065.exe, but there is no difference. The card reader is still not read, nor is it a drive letter appear to the inserted card.

  If I disable the Realtek PCIE card reader, then the "other devices" "Hard drive" in the Device Manager goes. But the card reader does not work as long. If I activate the card reader, the same error comes back with a yellow '! ' under 'other devices' "Hard drive" in the Device Manager.

  Could you please tell me how to resolve this situation? Thank you in advance!

  jacksan1

  You are the very welcome!

  Oh... It's big, happy that the problem was solved after recovery

  It would very probably be updates of Windows.

  Try to create a system restore manually each time before performing any installation of update or something important. You can restore to a previous restore points you have created, if a problem occurs after an update.
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  You can also create a shortcut to a button in your office so that you can easily create manual restore - Option 1 point in the following tutorial:
  http://www.SevenForums.com/tutorials/494-system-restore-point-shortcut.html

  System Restore: http://www.sevenforums.com/tutorials/700-system-restore.html

  I would also change the Windows Manual Automatic Update settings.
  This must be done in the HP support assistant program too - its control panel.

  I hope this helps.

  Have a good weekend
  God bless you.

  Concerning

  Visruth

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• ITunes does not recognize my device. I have windows 10 on a HP Envy.

  I recently bought a HP Envy and it came with the operating system Windows 10. Whenever I plug my phone the phone companion rises and ITunes does not recognize my device.

  All the patches?

  Install the latest version of iTunes on your computer.