internal speakers off and cannot turn on again

I tried to connect my laptop to my HD TV so I did the HMDI my reading by default but I have disabled the internal speakers and now I can't figure how to get back them on. The sound is played through my tv but when I unplug the cable HDMI that do not play speakers. IM using a HP Pavilion dv7-3065dx model.

Hello

Do a right-click the speaker icon in the taskbar and click playback devices.  Right-click in a blank area of the window and make sure that there is a tick next to "Show disconnected devices" and "Show disabled devices".  If you now see your option "speakers and headphones, right-click on this entry and Activate it or as a default value according to the State, it is in.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Satellite R630 DVD drive is power off and cannot turn on again

    For the first time, I tried to use DVD drive to install software. However, I found that his power was turned off. I checked the manual, which suggests that the FN + TAB key to turn on. But nothing happened after that I indexed both keys. I don't know what to do now. Thanks for your suggestions!

    Hello

    It s really strange that FN + TAB combination of keys doesn t work I often use this key combination to power on/off of the DVD player and it has always worked

    In any case, have you checked if the CD/DVD drive is listed in Device Manager correctly?

    Usually, if some keys FN n t work you must reinstall Flash Cards Support utility and added value package. These two tools can be downloaded from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

    I hope that it helps :)

  • HP Pavilion 10z-f100: laptop suddenly turned off and cannot turn on

    I was using my computer when it shuts down suddenly. I thought that my battery is low, but when I plugged it in, it lights

    Then the power adapter may very well have failed. The indicator is a diagnosis.

    If the laptop is still under warranty, the power adapter is a part of replaceable warranty.

    Check the status of your warranty here.

  • My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

    My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

    Looks like you have jailbroken your iPad.

    You must restore like new with another computer.

  • Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

    I installed Windows 7 Pro on a system newly built using a motherboard Gigabyte Z77x-UD5H, Intel I7 - 3770 K CPU and 32 GB DRAM3, on a SSD OCZ Vertex 3. Everything went well. It is now about three days, since I installed the operating system. I've been adding on software and other general photo editing programs. The Internet would still work. NOW all of a sudden I lost my Internet connection.  Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

    Hello is a network installed by Apple, iTunes more often software Protocol.  If you do not use iTunes * (or other Apple related programs streaming) you don't need.  If you do not use iTunes check if there are any available software updates.

  • By reducing the window of Firefox, it totally disappears and cannot be enlarged again.

    After an unknown crash of Firefox, I restarted Firefox.
    The button appeared in the tasbar, but the window was never to be found.
    By clicking the button did not help.
    I used the windows Task Manager to maximize the window, which worked OK, but...
    When you click on the button 'size down' (upper right button medium), the window disappeared again and could not resurrected again in the normal way.

    So for now I'm stuck with a maximaized window, and I can't resize and move more...

    Sincerely, hope you have a solution...

    Best regards
    Lody Claessen J.

    Many thanks for your info.
    I have sort of solved the problem in a different way.
    I am now using "Pale Moon" and since then I have not seen the problem again.
    I'll upload the file proposed, just in case the pale Moon has the same problem.
    Best regards
    Lody Claessen J.

  • Portege A600 - SD reader disappears and cannot turn off WLAN

    Hello
    I have 2 problems with my a600

    1:
    When I suspend or Hibernate, my sd player disappeared when my machine wakes up again... It's really disturbing when I run programs of it. eject and re - insert card does not help.
    System Manager sd reader to disable and enable the work of sd reader, but I don't do that all the time.
    This is the normal way that a toshiba works or is this a problem of my machine? any help?

    2:
    with flashcard wireless I can turn off wifi (I barely use) but when I reboot it is again and again. Is it possible to change this default setting?

    Hey,.

    1: have you already updated the card reader driver?

    2: you can disable the wireless network adapter in the device for example Manager. Then the wireless network card is disabled until you turn it on in the Device Manager.

  • NB550D boots in black of the screen and cannot turn off even

    I had my NB550D for only less than a month. I've updated the memory to 2 GB and the Op to Home Premium system, but nothing else. It's on auto update on security issues, and I remained with the McAfee protection which was pre-installed (and paid for a year).

    All is well until a few days ago when you turn on, I just got black screen. Could hear the fan and disc well. Finally pressed the power button, nothing changed, has waited a bit, pressed again and it is off. When I pressed once again he came as usual. Used several times in the last two days and has been very well. Now today I get black screen again and can hear the fan. When subsequently, I pressed switch, I heard snoring disk but still black screen. Since then, tried pressing on/off switch from time to time but no change at all - can't turn off!

    Anyone has any suggestions please?

    Flingel

    I read in another forum that the answer must take the battery (having already taken the sector) so it will die and then press on and press and hold power for 30 to 60 seconds. I had nothing urgent to do let him die naturally when the battery is missed rather than take out the battery when it was on. Then, I held the power button for 60 seconds, plugged in and turned on. It starts very well now, but of course I don't know a) the question of whether it is because I held the power button in 60 seconds and b) on the question of if same thing will happen again, so if anyone has experience of this behavior, I would be grateful for comment.

    Thank you

    Flingel

  • Smartphones blackBerry "Radio Off" and cannot be turned on via 'manage connections '.

    Hey all, hoping someone has seen this before on the curve.  I ran downstairs to the power and the radio stops automatically, but now, no matter what I do that worked previously, (make a call/go in manage connections-"Turn on all connections") the radio does not turn on.

    Any ideas or advice before I commit to BlackBerrycide?

    Hi and welcome to the forums!

    Try to remove the battery when the phone is turned on,

    Let it down for a minute, then replace, leave the device completely restarts

    1-3 minutes, see if the problem comes back.

    Thank you

  • Satellite A200 - 1 M 8: the monitor shuts off and cannot back up to Vista

    Hello

    I have the Satellite A200 - 1 M 8 with original Vista. Sometimes, I have some problems with the display (I have the latest drivers).
    The monitor turns off (not as usual but it is gray instead of black) applications flow normally (I hear the music of film, this) but I can't get back into windows.

    When I push button hibernation and I try to go back to windows, I see the blue screen then the computer resets.

    It happens very often and is really frustrating because my internet disconnects and downloads.

    I don't think that the temperature is too high because I think it's cool. How to fix this?
    Maybe some graphics settings or new BIOS?

    Please help me. I can't stand it!

    null

    Hello

    Your laptop is preinstalled with recovery delivered image, or if you have installed your own operating system?

    I have the Satellite A200-1CR preinstalled with original Toshiba Recovery DVD. I use the laptop quite intensively all day, but I never noticed anything like that. Since when did you notice this strange behavior?

  • In Windows 7, incident reports is off and cannot change settings

    Good people, I have a problem with my page reporting the problems of Windows 7 Home Premium. Incident reports you click OFF (not recommended) and the page where you have 4 choices are grayed out. He said: "some settings are controlled by group policy. It is a PC at home with administrative rights. I even went and created an account with the same privileges and same problem. If you know this problem and can help me I would be very happy. It is the only problem currently with my PC 100% excessive and up-to-date for free.

    Kind regards
    Eric

    Hello

    See the link below which has Windows Error Reporting information and reports on problems and Solutions feature in Windows Vista (for windows 7): http://technet.microsoft.com/en-us/library/cc709644 (WS.10) .aspx

  • Message "the file is missing or offline", can not find all the missing files and cannot import them again!

    I just opened up Lightroom and saw something for the first time. My latest photos 2 imports (around 1,000) are all displayed in Lightroom with the message "the file named... is offline or missing". I also noticed that in the Finder I see all files corresponding to the dates of importation. I tried to import the files again (I'm lucky to save one of the memory cards), and it won't let me import these specific images, saying they were already imported. Yet, I can't nice them anywhere. On top of this problem (and I'm sure they're related somehow), I just put in the memory card with new images in Lightroom and it went about 1/3 of them say have already been imported. I never seen anything like this. I use Lightroom 4. Please, I beg you, help is urgently needed here because I'm starting to panic! Thank you.

    A second importation is the wrong answer.

    What you need to do, is to use import initial and in the folders Panel, move the files to your hard drive.

  • T420 screen turns off and turn it back on when the AC adapter / CC is attached or removed

    You are working on your machine, staring at the screen and the power failure... Yes - something quite common in these parts of the world... but no worries, the screen darkens slightly according to the diet plan and you hardly notice. Then, when the backup generator kicks in and the power is activated again, the brightness of the screen is back to your usual setting. Meanwhile, it is not a gene. Right?

    Well, that's what should happen... except that most of the time it doesn't work! Most of the time, the screen turns off and then turns on remove the main power and reinstall it. Note that this never happened once with T61 or T41p.

    Initially, I assumed it was because I had an external monitor attached... maybe it was to reconfigure something there? But then, it happens even without the external monitor. Then, I tried looking for the video driver updates... maybe this bug had been fixed to the... no luck there.

    So, finally, after having known this more often now, I thought I would get feedback from you all. Any advice?

    Check the Intel Media profile with the power settings. If a battery is "Maximum economy" mode then it should be in Exchange for 50 Hz to 60 Hz... Change it to balance or maximum Performance and see if its ever-changing from 50 Hz to 60 Hz...

    If all else fails, try updating the video driver, it might be a bug in the previous version of the driver.

    See this KB for more information

    http://Forum.Lenovo.com/T5/T400-T500-and-newer-T-series/T420s-screen-refresh-rate-drop-to-50Hz-when-...

  • "HP OFficejet Pro L7680 turns off and won't turn back on"

    HP OFficejet Pro L7680 turns off and won't turn back on.

    Hello untech,.

    I see it's been a while since you have posted with us on the HP Forums.  Please, let me take a moment to say "Welcome Back".

    I see that you have a problem with the printer l ' auto turn off and not turning it back on.

    You happen to have the printer power cable connected to a power strip/bar?  If so, please try to connect the printers power cable directly to a wall outlet.  Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    The printer in the document is a LaserJet printer but this document is intended for HP products in general and only use the LaserJet printers for example.

    I'll also include a document indicating when the HP printer will not be running or to respond when the power button is pressed.

    If by chance the problem is not resolved after you complete the steps described, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Please do not hesitate to write me again if you have any other questions.

    I wish you a great Monday!

    See you soon,.

  • Cannot turn off

    I installed CS and LR on my new computer.  Computer has problems of hard drive and completely frozen.  Totally corrupt C drive. Return the computer to the dealer after a day of Exchange.  Cannot disable LR or CS6. Now see "Should disable" message.  I am of course unable to do.  Please advise...

    When you have a non-functional computer and cannot turn it off, click on the link below

    Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

Maybe you are looking for

  • Qosmio X 70-A-11 - very bad performance

    Hello I am owner of a Qosmio X 70-A-11 for about a year and a half, and recently it started to run poorly, especially when the games. I OC the GPU, programs not essential disabled, clean the DDI and the hard disks, use a pc tune up... but no signific

  • Problem with the RTEXE file on PXI system

    I have attached the image of the comic to a very simple code that illustrates a problem with a file RTEXE on PXI system. If the VI (LabVIEW 2011) is started on the target of the RT of a LabVIEW project, no problem. If the code (with the shared variab

  • My Dell screen opens but my OS does not load

    I tried to boot in safe mode to maybe make a system restore, but once I chose my OS black screen fills only to halfway to the top with file allocations, the last being listed is a pilot, then everything just stops and lies, I tried safe mode prompt t

  • How to transfer files from Vista on a USB Flash drive?

    I do not know how to start copying the files for the flash player

  • Reliable forcing ActiveSync connection blackBerry 10 BB 10 OS 1.3.2

    I received recently information som who informs me that with the next OS update for connecting devices of BB 10 (10.3.2) to a BES server is forced to use an ActiveSync connection approved which means devices will need to make the connection, the cert