Internet connection via Wi - Fi on MacBook Pro

Similar Questions

• HP deskjet 3510, connected via wi - fi for MacBook Pro running OX 10.7.5

  All of a sudden my computer will not 'see' the printer, I recently changed my router, but I was able to print after the change, the printer is connected to the network on the wi fi is stable.  I followed directions available in the HP web site, including the lead from the printer to my computer, when I try to install the computer can't "see" it

  Any advice as to what to do next?

  Thank you

  10 guajiros

  '

  Hi 10guajiros,

  I want to help you get your Deskjet 3510 working on your Mac running 10.7.5. I understand that you already have a troubleshooting, but I am confident that we can get back to work.

  Please, take the following document and complement the solutions advocated; The printer keeps Wi-Fi connection.

  If the problem persists, please let me know what is the first part of the IP address of printers. It might be 169.254.XXX.XXX, or 192.168.xxx.xxx or 192.168.223.1. If end with 223.1 Please provides all of this period if not only need to know the first 2 segments (yellow and green ) of it.

  I look forward to hear from your part, thank you.

• Bluetooth connection between iPhone 6 and MacBook Pro (mid-2014)

  I'm trying to connect my iPhone to my MacBook Pro 6 so that I can use the universal Clipboard function in the Sierra. Both devices are updated, software-wise, and both devices meet the requirements of continuity system.

  When the settings bluetooth for the MacBook, I see my iPhone listed as a discoverable device.  When I click on the "even" button, the numeric code appears, followed by the notification on my iPhone to confirm the code. As soon as I confirm it, the screen bluetooth on my MacBook poster that my phone is connected for a few seconds then disconnects.  After that, my phone will say that the device, that I am trying to connect is out of reach, even if both devices are currently sitting side by side on my coffee table.

  It could very well be a simple solution to what I forget quite simply, if I appreciate any help that can be provided.

  

  Hi olly739,

  I understand that you do not want to use the universal Clipboard with your iPhone and your Mac. If both of your devices meets the hardware requirements so the following configuration requirements, you are ready to use the universal Clipboard (no necessary Bluetooth pairing).

  • Each device is connected to iCloud with the same Apple ID.
  • Each device has two turned on Bluetooth.
  • Each device has Wi - Fi enabled.

  Steps to follow for the universal use of Clipboard:

  1. On a single device, copy the text, image or video as you normally would. This content is added automatically to the Clipboard of your other device nearby. She stayed briefly, or until replace you it by copying something on each device.
  2. On the other device, paste the content as you normally would.

  Continuity of use to connect your Mac, iPhone, iPad, iPod touch and Apple Watch
  https://support.Apple.com/en-us/HT204681

  Sincerely.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Connection to Smartphones blackBerry with macbook pro

  I have upgraded to a BB Storm today and that you have installed the software on my Mac PocketMac. I then try to connect the BB to my Macbook Pro, but it comes up with this message: [01:34:13.208] unable to connect to BlackBerry (error 1); jump.

  I looked on the website and recommended just to install a more recent version that you can download. I have it done but its still saying the same message. Read there are some probs in connection with the new MacBooks, but mine is more than a year now.

  Any ideas anyone?

  Sorry, should have posted earlier. I solved the problem I had with the connection to my mac, is perhaps the same prob you meet. You must activate 'the mass storage mode support' and format the card media if you have one. Do this in the file on the bb and then its under 'memory '.

  I hope this helps!

• Can you connect a Bluetooth headset to MacBook Pro?

  I'm getting a MacBook Pro for College and that the helmet I have Bluetooth. Are they connect to the computer?

  They should be. I used several BT headphones on several different computers. You will need to read the docs for the headset to see how to pair properly via the BT preference pane in system preferences.

• Connect to Server error on MacBook Pro OSX10.11.4

  A few days ago I have problems with my MacBook Pro (Retina display end-2013, OS X 10.11.4) and the connection to my server (Windows 7 laptop).  I connect to this server from my Mac via my wifi connection, it connects and a few minutes later, the server disconnected and I have to reconnect turn off my WiFi on Mac and turn them on again, and it's very annoying that repeat after 5 min.  Do you need information about my connection Wifi or my laptop Windows 7 to give me a hope of solution?

  Thanks in advance and be cool!

  Hold down the Option key while you click on the wireless icon in the menu bar. You will get a display something like this:

  

  What do you see for the PHY mode and channel?

  What do you see for RSSI or signal strength?

  What do you see for pass rates?

  very important and how many other networks do you see?

  .

• connect a projector to a macbook pro

  I recently bought a macbook pro, the death of my old macbook. I can not get my projector to the computer via a USB connection. When I plug in the USB the USB display Installer appears. I followed the instructions but nothing happens. I spent in the display setting in system preferences and held that the option pressed toward the low key and double clicked, but once again, nothing.

  I connect the projector with a different cable?

  Without knowing the specific or this projector that the USB connection is used to you must go the projector support site and see if there are updated disks that support El Capitan. For some devices manufacturers are reluctant to, and some are not yet of drivers for El Capitan

• I can't connect my headphones on macOS / Macbook Pro retina

  Hello

  I can't connect my headphones (Bose SoundSport headphones) on macOS / Macbook Pro retina. When I look for them on the search list of bluetooth, I can find and pair, and even if it says its connected, it does not appear on the list of the sound source. Can someone please help me to implement?

  Thank you very much

  -Rachid

  Hey rashidansari,

  After reading your post, it seems that you are able to pair your headset Bluetooth for the Mac, but it is not appear correctly. This article may be able to help with that.

  OS X El Capitan: If your Bluetooth headset does not work

  Thank you for using communities of Apple Support.
  Good day.

• Can I use a Thunderbolt Firewire adapter to connect my PowerBook to my MacBook Pro?

  I want to use my PowerBook as a hard drive of my MacBook Pro. Can I use a Thunderbolt Apple Firewire adapter to connect the two?

  Yes, if they have the appropriate ports.

  (144310)

• HOW TO CONNECT THE OVERHEAD PROJECTOR FOR MACBOOK PRO

  How to connect a general cool projector for the macbook pro laptop?

  You need to know the format of output of the projector or VGA or something else

  You can get a connector like this

  (1190)

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• Keyboard will not be on when connecting. Mid-15, 15 "MacBook Pro w / retina.

  I don't know if that's how it is supposed to be or not. But I thought it would be a common sense that should the keyboard lit up as the Macbook Pro lights up on the login screen, but this one isn't. I wonder if this is supposed to be having no light until I logged in? If not, then how can I fix this to where the keyboard will be turned on when I turn on my Macbook Pro?

  Last Macbook Pro w / retina (got for Christmas a few months ago).

  2.8GHz Intel.

  1 TB

  16 GB of Ram.

  Thank you!

  The backlight on the keypad lights to power when FileVault is in use. If you need this feature, you must turn off FileVault.