Internet continues to go work on my device

Similar Questions

• My wrt400n worked very well, but since those days, as the internet continues to drop.

  My wrt400n worked very well, but since those days, as the internet continues to drop. My modem is all good and up and running. Its router just guard fall internet. SO I reset the router and thn it works. Pls suggest a soltuion. Its very frustrating and fiddles with the work.

  THX in advance

  How about if you change the settings of the router wireless. Change the width of the channel at 20 Mhz and select 9 as the standard channel under the 2.4 Ghz settings. For 2.4 GHz wireless security settings, you must set the security settings wireless personal WPA2 and AES as the encryption. BTW, you have problems in your laptop only, or with computers portable mutiple because if you don't have a laptop then you must try to update drivers wireless card from your cell phone.

• The data execution program continues to stop working Internet Explorer

  Data execution program continues to stop working Internet Explorer

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Continuity and transfer works do not (Solution)

  I open this topic just to share my solution to the problem that some of you may face too.

  After upgrading to Mac OS Sierra, the characteristics of continuity has stopped working completely between my MacBook and iPhone, so I did all the procedures standards withoutsuccess:

  -Disconnect icloud on both devices and connect again

  -Reset the PRAM on Mac

  -Reset network settings

  -Turn on bluetooth works (all devices)

  -Creating a new user on mac to see if it was a problem with the specific user (without success)

  -Restart both devices again

  -Reset the router (just in case)

  And after a day trying to fix it, I gave up. But the next morning (today), I decided to try one last thing, and to my surprise, everything returned to normal instantly and magically.

  Here's what I did:

  On your mac,.

  1. disable the bluetooth

  2. finder-> go to folder...->/Library/Preferences /.

  3. delete the file com.apple.Bluetooth.plist

  4. turn on the bluetooth

  Boom. Everything returned to normal.

  I hope this helps someone who has the same problem I was. For any question, please check below.

  lucasvallim wrote:

  On your mac,.

  1. disable the bluetooth

  2. finder-> go to folder...->/Library/Preferences /.

  3. delete the file com.apple.Bluetooth.plist

  4. turn on the bluetooth

  You can check that the correct path is the one as written:

  / Library/Preferences /.

  and is not

  ~/Library/preferences/

• iCloud/continuity does not work with my Mac or iPhone now

  I was really holding this problem for a very long time now because it's really a "first world problem", but in the past year continuity and iCloud were either non-existent or not working properly on my iPhone 5 s (32 GB) and mid-2014 13 "(2,6 GHz/8 Go/128 SSD) retina MacBook Pro (and now it just feels like I use old devices when I'm not."

  They work on the latest versions of iOS and Mac OS El Capitan, are on the same WiFi network at home or at school, have all two Bluetooth-enabled, and are both signed in my Apple ID iCloud

  Last year when I had the time, I reset the settings, wiped and restored the iPhone, etc, to try to get continuity works again. Nothing seems to work, and so that the whole process has been somewhat of a breeze on the release of these two operating systems, for some reason any he didn't work on my devices. I'm really ideas at this stage on how I can get the work continuity (the alternative at this moment is iCloud tabs in Safari).

  With iCloud, the issues are not as complex, but the photo stream is not working properly. If I take pictures on my iPhone that do they not appear in a few hours on my Mac, and if I add a bunch of pictures in pictures on the Mac, appear at all on the iPhone. I have all iCloud settings enabled for Photos and it's still buggy.

  I use Apple products since kindergarten and I consider myself to be a loyal customer. It would be a shame if I can't find a way to solve what should be a simple problem.

  Thank you for your help in advance.

  I guess you have tried to sign your iCloud (on all devices) account, signing in?  If you tried and it did not work, and this problem is ongoing for you for a year, my next suggestion would be to call Apple Support (link at the bottom of the page) or make an appointment with an employee at the Genius Bar in an Apple store.

• Satellite Pro L670 - 18F PSK3FE Webcam works become "unknown device".

  The * webcam * on my * Satellite Pro L670 - 18F PSK3FE * who is running * Windows 7 64 - Bit * a well worked until this week. My notifications bar started to say * "unknown USB device" * and when when I went to use the webcam it no longer worked.

  When I disabled the webcam in the BIOS the notification has stopped, but when I turned it on the notification came back again to the top. The unknown device is clearly the webcam.

  I updated my BIOS and tried the system restore.

  I also downloaded the driver for the webcam of http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have tried running that - + but it NEVER seems to complete the installation. + I have will continue to try to reload the driver and see if that helps, but from now on, I do not think that the pilot will help.

  If it is just a driver problem, someone could suggest how to get the driver to install really :-(

  I am now at a loss. I'm not sure what to do now. Suggestions?... + Please! +

  Hello

  Unknown device means that the driver is not installed.
  I think that the installation of the webcam driver should fix it.

  As face recognition also use the webcam, I recommend you to uninstall this tool as well as the older version of the software of the webcam.
  Both (or just face recognition) should appear in Control Panel-> software

  Now download both applications to the driver page.
  Start with the installation of the webcam driver:
  (1) unpack the webcam driver package

  (2) the TC30049700N.exe may also be decompressed (right click-> extract here)

  (3) now you should see different files exe, dll, and others attempt to run setup.exe to start the installation. If this does not work, go to Device Manager, mark (webcam) unknown USB device and install the driver pointing to the folder that contains the files of webcam driver. The system should automatically recover dll files.

  (4) restart the laptop and follow with face recognition software.

  Good luck

• Tab 2 A10 - 70F: Internet access via USB connected 3G / 4G device?

  Hello

  The A10 - 70F Tab2 has WiFi only. Is it possible to connect to the internet with a connected USB 3G / 4G? With other words: the tab can handle? Anyone with experience?

  Thank you in advance,

  Michael

  Yes is the short answer. And a few ways to do this:

  1 micro USB Dongle of 3 / 4 g

  2. micro USB to USB 'female' - then plug a 3 / 4 g USB Dongle

  And a couple of less obvious ways:

  1 WiFi connection to another mobile and use of mobile data of quotas (although plans only works on some data)

  2 micro USB to Micro USB and connect a mobile as shown above (does not work on all devices, although I look at the phone and tablet to fight for the battery juice is hilarious)

  3. connected to a PC via the cable USB/WiFi connection internet PC use.

  But yes, 3 / 4g Dongles work indeed & the Tablet seems to walk along very well with a micro USB version or a USB version with an adapter cable.

• Internet Explorer 9 stopped working after an uninstall of HP Support Center

  Internet Explorer 9 stopped working after an uninstall of HP support center and drivers for all-in-one printers from HP (psc1310, C4180, F4200) 3.  Intend to re - install for just C4180.  I chose option to remove any related software, even if the update HP and Photosmart Essentials were left.  IE9 will stop working at the launch (even if launched with no Add - ons and disabled protected and restored advanced settings Mode) and regardless of the initial URL.  If I remove the update of IE8 IE9 works very well.   I tried to reinstall IE9 update, twice, and it continues to fail.

  I am running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster, and Spybot - Search & Destroy.

  Now, I think that the problem with IE9 was not related to HP, but a replacement of Windows Update for drivers 'Intel Corporation - display - Mobile Intel (r) 4 Series Express Chipset Family': Intel Corporation display software update released in February 2011 (link useless http://winqual.microsoft.com/support/?driverid=20411791).   IE9 has started working OK when I put "use software rendering instead of GPU rendering *" (see http://forums.whirlpool.net.au/archive/1678709 , regarding 'module igdumdx32.dll vulnerabilities'), so now will consider remove this update.

  Sorry to disparage HP.  MS does this to themselves, as usual.

• Windows Update causes internet connection to stop working

  I installed the recommended Vista updates last night and this caused my internet connection, to stop working.  This has happened to both of my HP laptops.  I was able to work around this problem by going to a previous restore point but worry about future updates, causing the same problem.  Please notify.

  Hello

  Use a wired connection to download the latest drivers or download on another computer
  and transfer them to this one on removable media such as CD, DVD or USB drives.

  Control Panel - device - networks - WiFi - Manager write down of the brand and model, and then double-click
  on the drivers Tab - get the version number. Then double click on update drivers (this can do nothing
  that MS is far behind the drivers of certification). Then make a right click on the device and UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer and search for updated drivers, this will be your fallback. Then go to the Site of the manufacturer of the device
  and look for the even more recent drivers.

  Download - SAVE - go to where you put the driver - CLICK RIGHT to it - RUN AS ADMIN
  (repeat on the site of the manufacturer of the device)

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I would also turn off AutoUpdate for drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

• Windows: Internet Explorer has stopped working.

  Hello

  Every time I watched a video on a website/live news channel or a video onwww.cnn.com/video/ , I get a pop window that Internet Explorer has stopped working with the message "a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

  I tried to solve this problem, including the resolution of problems with Adobe Flash Player or update of Adobe Flash Player

  but without success. What should do?

  Thank you.

  Kasse2010

  Try to use the System File Checker to scan your operating system for missing/corrupt files, perform the following steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  Method 1: Set Clear cached data in Internet Explorer method 2: reset the security settings for Internet Explorer method 3: run Internet Explorer in "no Add-ons" mode

  Check out these links

  http://support.Microsoft.com/kb/936213

  http://support.Microsoft.com/kb/923737

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• BlackBerry Smartphones Whatsapp does not work on my device.

  Hello

  WhatsApp does not work on my device. service of Vodafone gave their best to fix this to the top of their end & the Application is very good but the Blackberry is the villan that not allowing non-http. Please help on this.

  Your welcome.

  Note that your use of the BlackBerry 9720, it will take the right plan BIS in order to work properly with internet, because everything is secure, unlike all other devices (apple, android and winmo)
  However, 10 BlackBerry won't the base BIS subscription anymore.

  You might want to consider this as well.

• Cannot install Minewsweeper - this app does not work on your device

  Recently I updated the day of Windows 7 Professional x 64 for Windows 8 Pro x 64, so I tried to install the Minesweeper in Windows Marketplace 8, I received the error "Sorry, this app does not work on your device."

  While I install other pretty good games, including Mahjong MS and MS Solitaire, I wonder what the problem is with the windows due to the problem... Thank you.
  http://PostImage.org/image/wfh09knmd/<-screeenshot.>
  PC configuration: 4 GB of RAM, Intel Core 2 Duo E6420, 640GO HDD with 166 GB free on drive C.
  Thank you.

  Hi Alexander,.

  It seems that you have a hard time with the installation of Windows game. We need more information to help you in a better way.

  1. you are using a third-party antivirus?

  2. you did it of any hardware or software changes?

  3. is the question confined to the Minesweeper?

  Here are a few methods, we can try to solve the problem with the installation of apps...

  Method 1: Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

   

  Method 2: Please follow the troubleshooting steps in the link below.

  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

   

  Method 3: check if the region is correct. Follow the steps mentioned.

  a. type 'region' on the start screen. Click on 'settings', and then press ENTER.

  b. on the "Format" tab, select "English (United Kingdom).

  c. click 'Preferences of languages' > 'add language' and add 'your language'.

  d. Once added, select it and click "move up" to make it the first language. Close the window of the language.

  e. in the 'region' window, click on "other settings" and check if the values are the same.

  f. click the "location" tab and change the location of the home to "your country" and then click OK.

  Method 4: temporarily disable the antivirus and check if that helps.

  a. press Windows + X, click on Control Panel.

  b. click on programs and features.

  c. right-click on the Antivirus system.

  d. click disable.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. Please get back to us if you have any other questions. We are here to help you.

• Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

  Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

  I tried to work offline at home after working online for a while. The sign came and wrote

  «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

  However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

  "The network is not connected TRYagain.

  It was the only option, does not allow me to continue offline...

  You have an idea why I couldn't?

  An Internet connection is required the first time you install and your creative Cloud of license applications.

  You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

• Buttons work on mobile devices?

  I created a button to display a hidden picture, but when I saw in the content viewer, it does not work.

  Will it work on iPad or Android devices? I can't try it now only on the content viewer and need to know before you continue

  Also if this market not can you someone please to what works on mobile devices

  Thank you

  Looks like you want to create a hotspot button. See this article: Hot Spot button Workaround for InDesign dig Pubs

  You can download the free advice of DPS on an iPad app. It shows how to do this and other effects.