Tab 2 A10 - 70F: Internet access via USB connected 3G / 4G device?

Similar Questions

• Administrator has restricted this computer to access the USB/1394 mass storage devices

  This message just started showing unexpectedly. Sometimes windows load. It is not and has never been a business machine, so I am the administrator.

  He has blocked my external hard drive up and now won't let me even to read a memory stick. In this case, I get «the administrator has denied access to USB/1394 mass storage devices»

  I searched through everything, and everything seems ok. I ran several controls of virus and spyware checks, but all come clean.

  I hope someone can help me. Thank you.

  You use Acer computer?

  If so, then uninstall: Acer LanScope or update and see if that resolve the problem.

• Converter USB-Ethernet Lenovo's tab 2 A10 - 70F

  Hello

  I had the tablet a few days ago and I want to connect it with my router via a LAN cable using a microUSB-Ethernet Converter. Can anyone recommend such a converter, knowing that it works with tab 2 A10 - 50F?

  THX in advance,

  Michael

  So, it's me, again

  I've updated my tablet with works of A10-70F_S000120_150907_ROW_TO_A10-70F_S00121_151222_ROW and everythings, WiFi ok, its ok and my Ethernet connection via USB works also! The latter was a Kitkat 4.4.4. issue.

• Satellite C660 - no internet access via WLAN when powered by the battery.

  Hi guys,.

  Just bought a Toshiba Satellite C660 and went through the installation process and everything seemed simple and easy. However, this changed when I tried to use the laptop wireless. As long as I fed it with the AC adapter, all right. When I remove the adapter I lose the internet connection for about 3-5 minutes before it reconnects for about 1 min. Then, he constantly repeats the cycle.

  I have a strong signal that shows as "Connected" to my wireless network in the network and sharing Center, but get the message "no internet access. I have another laptop and PS3 connected to my network wireless without any problem. I disabled them both where they do not interfere with the signal, but that made no difference. Therefore, I am sure that's not the router, the modem, or the wireless signal.

  I checked to see if my WLAN adapter needs an update to the driver, but it shows that I have already installed the latest drivers. I tried to change the power settings for the adapter wireless of "Maximum Performance" all this without success.

  In addition, it works fine on battery if plugged directly on the wireless router.

  Can anyone offer advice on how to fix it, before I return it to the store?

  Thank you

  Jason

  Please take a look in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59879

  There is a similar discussion on this theme.
  So to change the power management settings and the installation of the new driver Wlan has solved this problem.

• Vista host with internet access attached usb must be shared with the machine connected by ethernet xp

  Help I have something overlooking simple went through all the stages of preparation for machines as well as differences in networking. He had twice right, but when the internet connection is broken (my blackberry), something is not right on reconnect.

  Are you asking how to enable Internet connection sharing on the host of Vista?  If so:

  1. Go to Control Panel > network and sharing Center .
  2. Click manage network connections .
  3. Right click on the USB connection.
  4. Click on Properties .
  5. Click sharing .
  6. Put a checkmark in the Internet connection sharing box.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• No internet access for the connection with the router.

  I bought a router D-Link DSL-2750U and when I connect to the internet it says no internet access even I've updated the MAC address of my router with my ISP, but still no use I use don't win 7. any help on this?

  Hi Chavigny,

  In case you have contacted the ISP provider and verify that the network settings are correct, then try the following steps:

  Method 1:

  I suggest to run the network troubleshooter, and check to see if it lists all the errors and helps you solve them.
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Update the network driver.

  Steps to update of network driver:

  (a) click the Start button.

  (b) in the search box type devmgmt.msc, and then press ENTER.

  (c) select the network card device and right click on it

  (d) now select Properties.

  (e) in the Properties window, on the driver tab, click Update driver.
  After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Please refer to:

  Why can't I connect to the Internet?

  Previous post: the State of the question.

• No Internet access after the connection of the cisco vpn client

  Hi Experts,

  Please check below config.the problem is vpn is connected but no internet access

  on the computer after the vpn connection

  ASA Version 8.0 (2)
  !
  ciscoasa hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP 192.168.10.10 255.255.255.0
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  IP 192.168.14.12 255.255.255.0
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
  INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
  55.240
  pager lines 24
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool testpool 192.168.14.240 - 192.168.14.250
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access INSIDE_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.14.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
  Crypto-map dynamic dyn1 1 set transform-set setFirstSet
  Crypto-map dynamic dyn1 1jeu reverse-road
  dynamic mymap 1 dyn1 ipsec-isakmp crypto map
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  password encrypted user testuser IqY6lTColo8VIF24 name
  username password khans X5bLOVudYKsK1JS / encrypted privilege 15
  tunnel-group mphone type remote access
  tunnel-group mphone General attributes
  address testpool pool
  tunnel-group ipsec-attributes mphone
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
  : end
  ciscoasa #.

  Hello

  Large.  Try adding the below to make it work

  vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0

  NAT (inside) 0-list of access vpn-sheep

  Harish

• Internet access via Wi - Fi lost to WRT54GS

  I got a home network for the past two years.

  ISP is Virgin Media (was Blueyonder) cable broadband.

  Router is Linksys WRT54GS

  Desktop computer is connected by cable to the router.

  Laptop is connected wireless.

  Two computers running Windows Vista

  No settings have been changed, but all of a sudden the laptop can still connect to the network, but will not get on the internet.

  The PING etc tests confirm that the laptop is on the network.

  Laptop was returned to the PC World under extended warranty. They said, he had been infected with a form any of Scareware, preventing access to the internet, said that they had authorized, and the laptop connected wirelessly on their network. When I got home, it still wouldn't connect to the internet.

  I formatted the hard drive and reinstalled Windows - still the same.

  I have updated the firmware on the router - still the same.

  I plugged the portable th. to a network of friends, and he got on the internet there. I also have it connected via ethernet to the modem cable, and it worked as well.

  BUT I still can't connect to internet wireless - ideas please?

  NP, it seems that all the connection settings on your computer is meaning, everything is normal. Have you checked if the values DNS on the router and your computer are similar?

  If they are, do you know how to reset your router? Press RESET on the back of 30 seconds while the power is on and then perform the procedure here

  To configure a router Linksys with cable Internet Service

  Reconnect to the network without first setting the wireless security. Then see if you can go online. The mac address clone procedure on article should be done on your main computer. So, tell me if you can get online on both computers after the fact.

• Customer WRVS4400N wireless doesn't have internet access, unless first connected via a cable

  Hi all

  I recently bought a security WRVS4400N router and have a strange problem with it. I have set up as my main router and two computers (a desktop and a server) by using DHCP. Both work very well, internet is as quick as it should be, no problem.

  However, when I set up the Wifi SSID (some security options I use, even with open/wpa/wpa2) and connect to my laptop. It is assigned an IP address and windows said that there is an internet connection. As soon as I try to do something good, I fell. Try to ping an external server, failure and dropped. Open IE, failure and dropped. I can't access my local server connected by wire to the router.

  If I connect to the laptop via a cable to the router everything works, and he continues to work when I unplug it. So that means that right now, I walk on to the router and connect my laptop for 3 seconds before you unplug the unit and then use the wifi for a couple of hours with no problems. But as soon as I try to turn on my wireless Logitech SqueezeBox or the wireless printer, they fail and take my cell phone with it...

  I have:

  reset the router, used the two firmware 2.0.2.1 and 2.0.1.3 and did a factory reset.

  Tried moving the router near the laptop, no difference.

  Does anyone have an idea on what could be my problem?

  /Thomas

  If you have received if from NewEgg as a refurbished.  Call Cisco Technical Support and open a ticket for her. Mine is returned to them for the same kinds of questions.

  Expect to be without it for a while, they told me within 24 hours of receipt, my replacedment would be sent.  They had for 3 days and counting... learned to love the tracking information.

• VPN works well but domestic internet access via router

  Hello

  I am connected to my Office VPN (Cisco Client) and I am able to access all brach office servers and network devices using their IP addresses internal.

  I can also access the internet.

  But when I do a tracert for office servers it is routed via office network. But when I tracrt to the internet via my router domestic routing. ??

  Isn't it supposed to go through my business network.

  Any help would be great. Thank you

  It's called a VPN split tunnel.  They channel the resources of the company by the VPN and let your internet go out via your local internet connection. Some companies divide tunnel and a few all traffic, including internet (complete tunnel).

  There is nothing you can do. This is how your system admins have set up.

• Internet access via Wlan - laptop A660 Sateliite network card problems-

  Hello

  My Satellite A660 will not access to the home network to connect to internet, repair program says it cannot fix this problem of connectivity. Other my own network I can connect without problems.
  Latest Broadcom drivers are installed.

  No idea if the problem is with the router?

  Have you tried to use the WLAN by friends?
  Have you checked all the WLAN settings?

  Wireless network adapter must be enabled
  Standard WLAN must be correctly defined

  Your WLAN is visible for your laptop satellite?

• ext4 and SD - tab 2 A10 - 70F cards

  Although the android root file system is ext4 tab 2 seems to be able to use a fat32 formatted miniSD card.

  1. is there a way so he can use the formats of ext4, f2fs, exfat, ntfs file without rooting?

  2. If I root, what is the best way (s) to obtain the support of ext4, f2fs or exfat/ntfs?

  Here's how you get exFAT and NTFS support.

• stereo recording via USB connection?

  Hi all

  I'm a newbie on the audio recording and have what may be a stupid question.  Is there anyway to use two USB microphones for stereo recording via the interface USB (using two USB ports?) in Audacity?

  I have a Mac Mini with OSX 10.11.4 and use Audacity CS6.

  Thank you

  Kevin H.

  kjhart0133 wrote:

  Hi all

  I'm a newbie on the audio recording and have what may be a stupid question. Is there anyway to use two USB microphones for stereo recording via the interface USB (using two USB ports?) in Audacity?

  Audacity? Do you mean the hearing?

  I think you'll have a little difficulty to do this anyway, as the clocks of scanning in the pickups will not be synchronized. Which means that even if you can get two of them work, elimination will be in every sense. You can persuade two microphones to work at the same time without too much difficulty, but this only works if you have two independent sources that do not have to have any kind of relationship of phase, and it is the relationship of phase which actually do stereo work.

  There is, as far as I know, only decent stereo micro USB, and the Tricapsule Yeti, one blue. It crosses all phase problems in having everything digitized by the only encoder, so all the problems of phase are sorted completely.

• lost internet access after the connection to the server

  Have had this problem in the past and in the hope that a workaround is available.

  MAC OS X El Capitan worm 10.11.2 runs and loses the Internet when connected to a server/sharedrive(on Microsoft Windows environment).

  You asked the same thing, or a similar, issue in October 2014. What happened after that?

• BlackBerry Smartphones via USB connection

  Not sure if anyone can help - I am running XP Professional at work and can't connect my "BlackBerry"BOLD"" to the Office Manager. I keep getting the message "USB device not recognized". There is no connection problem with my laptop under 'Vista' (Surprise surprise) and all functions are fine. Y at - it something I'm doing wrong - I reinstalled the software one or two times on the XP computer, but there's stillno link!

  Hi 707Rick and welcome to the forums!

  We can help you with that, but this forum is just for introductions

  Open a thread on the forums of 9000 "BOLD" and be specific about everything

  you have tried and versions of the OS etc. We can work on that.

  Ok?

  Thank you

  Bifocals