Internet deal with VMware and SAN?

Similar Questions

• Add the host to the cluster vmware and SAN equilogic

  Hello...

  I will add 2 new for our cluster vmware vsphere host... I have not done this before, but think that I got the hang of it...

  But one thing that I am uncertain the San connectivity, is it just to create the map of iscsi on the vsphere host software and then add the adapters iqn name to access the San volumes page and rescan for the accessible volumes in the vmware host?

  That's about all.   Reported Tech on how to do so expressly.

  en.community.dell.com/.../TR1075-Configure-iSCSI-Connectivity-with-VMware-vSphere-5.pdf

  TR1091 shows how to configure VMware ESXi for best practices with storage EQL.

  en.Community.Dell.com/.../Download

  In my environment I use CHAP credentials for clusters of ESXi.  In this way a specific set of ESXi nodes use the CHAP username/password to access EQL volumes.  Advantage is when you add a new node, you only need to provide the name of user and password c.  You will not have to change anything on the side of EQL to add/remove a node.

  Kind regards

• Unable to connect to the internet more with vmware fusion on the virtual machine

  Run Windows XP on my mac with Vmware fusion 3.1.3. He worked for always fine... recently started my virtual machine to the top and no internet connection. Generally bridged connection is what I use. The network card went to XP. do not know what to do... If you have any suggestions please help. Thank you

  Ajd3575 wrote: How can I add the NIC?

  You can try the search in the help file!

  Take a look at: VMware Fusion (menu bar) > help > Search > type network , then select: Add a network card

• Instant snapshot of VMWare and SAN

  How the instant different(or similar) snapshots SAN VMWare?

  Thank you

  The case of use as well as the method of snapshots is very different.

  As NuggetGTR says table instant base will take a snapshot of the entire lun/volume, but instant VM are just for each individual VM.

  How snapshots are created are very different and this determines the use case. EG Netapp table according to snapshots are very effective and take very little space, because (simplifying here) they mark all blocks in the volume in read-only - so you have an overview of the entire volume and because it is not copying all the data it is very fast and not take place.  As new data are written/modified/deleted it says new blocks and blocks alone reading in the snapshot are not deleted or modified.  This makes it very effective and good for backups long term.  However, as this is an array based snapshot is done at the block level and Netapp doent know what data are, could be a SQL database or the virtual machine.  honing to get application-consistent backups, to a plugin abreast of the API as Snapmanager for SQL or VSC for VMware.

  VMware based snapshots of a virtual machine are created by sleep (possibly) the guest operating system and then marking the. VMDK a new read-only. VMDK is created for the virtual machine that will handle the reads/writes new data and the original. VMDK will manage the readings for the old data.  This process is repeated for each snapshot that is taken.

  More the string of snapshots (and. VMDK) files the most impact on the performance of the virtual machine.  Also when you delete a snapshot must merge the. Files VMDK back together which can take a long time and have a performance hit of old clichés.  They will be also eats more space!

  These are intended to serve as a term 'safety nets' shot so that you can quickly return as any change - not as a long-term backup solution.

  They are a great tool to use in conjunction with array-based snapshots.  Using Netapp for example, you can install the VSC in vcenter and use it to plan the snapshots table in conjunction with the snapshots of VMware.

  This will fix a nice snapshot of each virtual machine with a consistent state Vmware hard, then the snapshot of the table will be instant volume/LUN with all these beautiful .vmdks suspended/static, then it will remove snapshots of Vmware.

  Some best practices:

  • The snapshots are not backup. A snapshot file is only a log of changes to the original virtual disk. Therefore, do not count on it as a direct backup process. The virtual machine is running on the most current snapshot, not the original disk vmdk files.
  • Snapshots are not complete copies of the original disk vmdk files. The take a snapshot does not create a complete copy of the original disk vmdk file, rather it copies only the delta records. The changelog in the snapshot file is combined with the original files from disk to be part of the current state of the virtual machine. If basic disks are removed, the snapshot files are useless.
  • Delta files can reach the same size as the original file of the basic disk that's why storage provisioned to a virtual machine grows an amount up to the original size of the virtual machine, multiplied by the number of snapshots on the virtual machine.
  • The maximum supported snapshots in a string is 32. However, VMware recommends you to use only 2-3 shots in a string.
  • Do not use any single snapshot for more than 24 to 72 hours. Snapshots should not be maintained for long periods of time for application or Virtual Machine version control purposes.
  • • This prevents snapshots to grow so large to cause problems when deleting / engaging them to the original virtual machine disks. Take the shot, make the changes to the virtual machine and delete / commit snapshot as soon as you have verified the condition of operation of the virtual machine.
    • Be especially diligent with use of the snapshot on the virtual machines, high-transaction, such as e-mail and database servers. These clichés can develop very quickly in size, filling data store space. Commit snapshots on these virtual machines as soon as you have verified the State of work appropriate to the process that you are testing.
  • If using a third party product that takes advantage of snapshots (such as backup of virtual machine software), regularly monitor systems configured for backups to ensure that no snapshots remain active for long periods of time.
    • Snapshots must be present for the duration of the backup process.
    • Photos taken by software of third party (called via API) may not appear in the Snapshot Manager vCenter. Check regularly for snapshots via the command line.

  Here is a good article on vmware snapshots:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015180

• Intermittent Internet connection with WPC100 and WRT110

  I bought a router WRT110 wireless several weeks ago.  Used with my WPC55AG without any problem at all.  I liked the wireless-N, so I decided to upgrade to a Wireless N notebook card and bought a WPC100.  I can still connect to the router with the signal strength of 100%.  However, when you try to access the Internet, sometimes I can connect to Web sites, but I regularly get an Internet Explorer error message cannot connect to the internet, even if the signal is always 100%.

  Tried to go back to my WPC55AG and not to make any connection error messages.  Tried to connect to my router with my PSP and not to make any connection error messages.  Connected to another router wireless that didn't have WPA or WEP using my WPC100 and did not have any connection error messages...

  Any ideas?  Thank you!

  I changed my router settings as you suggested, with the exception of the security mode - I left it to WPA - 2 because I wanted the extra security.  It worked fine for a day, until I restarted my laptop...

  Then I tried to use your router suggested settings and set the WPA security mode and it works very well for 2 days and several reboots!

  Thank you very much for your help with this!

• BlackBerry Z10 mobile internet tethering with Z10 and my laptop?

  How can I use my Z10 as modem wireless for my laptop. The feature is part of the BB desktop but I do not see the link for BB.

  Thanks Brian

  You can activate the hotspot and connect your PC wireless:

  HotSpot/connections network/configuration (note that WIFI will go off when your enable hotspot)

  (I tried yesterday, painless)

  OR

  Select tehering, then use a USB connection or bluetooth:

  connections/network/modem Setup

  (used only with my Playbook tethered bluetooth)

  Some vendors may require for hot spot or tethering so I guess that some suppliers may have this disabled in their locked phones.

• Dealing with speed and speed in a 3D space.

  Hello everyone.

  I recently posted a question about the project, I am working currently on, but it's a new show, so I thought I would start a new discussion.

  I'm doing a video clip. In this clip, the audience is taken through a "vortex" as the tunnel in space. Similar to this one;

  http://www.YouTube.com/watch?v=VwjfrAn0hnA

  However, in the video the whirlwind is made of a number of audio waveforms, generated with the functionality of Waveform Audio After Effects, which have been précomposé and made into a tunnel by using the CC cylinder feature of After Effects.

  I made the composition and the waveforms that make the whirlwind 30 000 pixels in height, which, according to the CC function cylinder has been applied and axis of rotation X adjusted 90 degrees, translates into depth.

  I created a layer of camera and only related to a layer zero. I placed the camera at the opening in the vortex (beginning of tunnel/top of the cylinder), at the beginning of the main computer through the Z axis and made a keyframe. I'm at the end of the model, place another keyframe, and move the position of the Z axis, until it comes to the end of the vortex (at the bottom of the cylinder).

  I hit everything in 1/4 resolution because I am on a MacBook Pro technical standard and it can not handle the size of model précomposé waveforms (30 000 pixels) full resolution (there are 10 waveforms précomposés in a precomp. If ten precomps which are 30 000 pixels in height). I play it through and the camera does not travel through the wormhole to my desired speed. I need to look like the audience travel through the wormhole much faster.

  Currently, the vortex is just a right cylinder. However, I intend on using various travel cards to add turns and dips to vortex, as well as adding various other pieces, such as particles.

  So my question is: How do I change the speed of the camera so I get the speed I want?

  Note: If anyone thinks they know better to approach this project, even if the methods are completely different, I'm all ears.

  Thank you!

  Simply change the diapers slightly left / right, each with slightly different values. If you have some of them behind each other and the shifts to more or less follow a sine/cosine or an exponential curve, it will look like a long tunnel. Could be automated using expressions, of course. Another idea would be to exploit a particle system as an individual with a ring as transmitter or even an emitetr point that spit particles of the rings. Using forces and different properties of the particle over time, you can also create some interesting things...

  Mylenium

• I installed on my desktop on 2 years of Adobe5 and am trying to learn to use the program. It's obsolete now, so I'll try to catch up and dealing with for and creative cloud application. I have problem activating CC trial/subscribe. Is there no no

  What is someone has a problem to update Adobe5 to creative cloud on their desktop with Window8?

  What problem do you have?

• Why is it so important to fill my hardrive with updates and interfering with my rights to opperate when I'am supposed to be uncontrolled from my computer?

  I' year always tring to deal with things and when I'am doing something on my computer, I get interruptied or I get a warning to not respond on my screen and it upsets me to point my computer turing.

  I ' am 66 years old and not all patientabout be put on hold or waiting.

  Hi rogerhankel,

  Method 1
  I suggest you try the steps from the following link to improve the performance of the computer.

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Method 2
  I suggest you to see the following link:

  Windows Update
  http://Windows.Microsoft.com/en-us/Windows/help/Windows-Update

• Win 7 - closing button displays updates to deal with but no updates ever treated on "stop".

  Latest windows 7

  Windows Update works fine in the sense that the traffic updates are treated and updated correctly.  But there are 3 or 4 weeks, I noticed the power off button displaying the exclamation symbol and when I got "high" on the button it displayed the following message - "installs the updates and then shuts your computer."

  I turned off, but no updates have been processed.  I turned on again and check the updates manually, but there is nothing exceptional.  I have a few days later a bunch of updates have been processed when I turned on (all properly updated), but I still got the message on the off button indicating updates to be processed when I turned off.  When I turned off no updates have been processed.  Other that an annoying message on the off button, there seems to be nothing wrong with my computer.

  To try to address the issue, I ran the Windows update program utility troubleshooting on the Microsoft site.  He said that this is a problem ("registration for the service is missing or corrupted") and said that it has been fixed.  However, the Power Off button continues to indicate that updates will be handled when I turned off, but stop down quickly without ever get processed implemented to date.

  This isn't a big problem for me, but everything just annoying.  Can anyone help

  Windows Update behaves properly and install updates when they become available.  The only problem is that ever time I'd go to power off the system tell me that updates would be installed when I turned off.  But there is never to deal with updates and the system would be turned off after a very slight delay.  So on advice from Microsoft, I changed the windows settings of update "manual" and checked from time to time for updates and the issue was "resolved."

• Best practices for Exchange 2003 with VMWare ESXi 3.5 and iSCSI SAN

  Hello guys,.

  Here's the Q? We have 1 physical Exchange 2003, the HOST of 4 and 1 iSCSI SAN with LUN 3, 1 for data, 1 for VMWare and 1 for SQL, if we're going to virtualize it, I don't know where to put data Exchage and newspapers. I do not think that that is a good practice to put together the data but I do not have another SAN. So, what can I do?

  Thank you.

  We have 813 mailbox.

  I agree with cainics, start an average size and go from there.  I know it's a production mail server and you can not exactly 'play' with the settings because this requires time, but if you do the VM too big, you would have nothing left for other virtual machines.

  I would go 2 vCPU and at least 4 GB of RAM, maybe 8GB.  There must be parameters for the Exchange mailbox 813 and X users # to implement your environments in order to get an idea of the amount of RAM that will be... 4GB seems minimal to me, but 8 GB would probably be better like that.

• Internet Explorer 9 problems with Vista and Windows 7, are there known issues that are causing to freeze or crash completely computers?

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I am I have the same situation, because I installed Internet explorer 9. The only thing that differs with us is that I kept IE9, and I'm dealing with it full of hope that MS will return with a patch soon!

• VMware Guest works with IPv4 and not IPv6 - ideas everything?

  Well, have a little patience with me. I have a very complicated setup which works perfectly with IPv4, but does not work with IPv6. I hope that one of you superstars can help me to understand how to enable IPv6. Here are the basic configuration:

  
  

  Mac mini:
  

  • Mac mini (end 2012) Mavericks 10.9.5 and VMware Fusion 7.1.0 Server
    • A KDLINKS up one1 account USB 3.0 to Gigabit Ethernet adapter is installed. It is functionally identical to all other brands of USB3/Gigabit Ethernet, which is based on the 6 AX88179 chipset adapter; which is the latest version.
    • (I have another identical USB 3.0 to Gigabit Ethernet adapter, still in the box, do not set, in case this might help the solution.)
  • The most recent 6 Mac driver is installed in the Mac mini, downloaded from ASIX. (The driver on the driver of the KDLINKS Web site is a little older).

  Internet connection:

  • Our Internet connection is a regular cable modem. The cable modem is a simple bridge, Ethernet cable. He gets a public (Internet) IP address on the ISP using DHCP Ethernet interface, as you can imagine.

  VMware Fusion Guest - a firewall device:

  • The VMware Fusion guest is a firewall device. Here's its network configuration:
    • The internal interface is bridged to the Mac mini integrated Ethernet adapter. It has a private IP (10-net). It serves as a one-stop shop for all of your home LAN.
    • The external interface is bridged to the USB/Ethernet adapter. The device of host firewalls Gets the address public Internet IP from the ISP via DHCP.

  Mini Mac Network Configuration:

  • Network Configuration Mac mini (OS X System Preferences network 10.9.5,):
    • The Mac mini integrated Ethernet is configured with a fixed IP on the LAN private address and is configured to use the private IP address of the firewall device of comments as the gateway and DNS server.
    • Adapter USB/Ethernet of the Mac mini is defined as:
      • Configure IPv4: Off
      • Advanced... Configure IPv6: Link-local only
      • The goal is to ensure that the Mac mini can be reached or attacked from the Internet. All Internet traffic should be a device of host firewalls.

  Totally works with IPv4.

  Surprisingly, this all works with IPv4 without any problem whatsoever.

  
  

  IPv6 taken in charge by the provider of Internet services and tested with Time Capsule:
  

  There is no problems with IPv6 when I use an Apple Time Capsule as the firewall / router between the home network and the Internet, using the same cable modem. It is easy to configure, and IPv6 works inside the LAN House and all as well go to the servers on the Internet that support IPv6. Tested, working, as expected.

  I'd do it want to use this device to host VMware Fusion as our firewall router firewalls House for IPv4 and IPv6, the time Capsule not.

  THE PROBLEM:

  The device of host firewalls cannot acquire an IPv6 address of the ISP. He obtains an IPv4 address, but not an IPv6 address.

  THE QUESTION:

  What can I do to make the apparatus of host firewalls acquires an address IPv6, the same way as did the Time Capsule?

  • The Mac mini (host) does not expose its interfaces directly to the Internet.
  • The Mac mini (host) would carry its IPv6 Internet traffic via the comments, the same as its IPv4 Internet traffic firewall application.

  Any suggestions would be greatly appreciated.

  I solved my problem. It was a setting of configuration of the firewall of comments and had nothing to do with VMware Fusion. Here are the details, in case others have the same problem:

  Comments firewall device has been configured as a gateway IPv4, but not as an IPv6 gateway. As a result, the firewall received a single IPv6 address of the ISP. It was a 128, of course.

  Once I enabled the 'IPv6 Default Gateway' setting for the interface external unit of firewall of comments (which translates as the USB3/Ethernet interface to the cable modem) and rebooted the modem cable and firewall, the firewall has asked an IPv6 network block instead (a 64 network). After that, everything worked as expected.

  I know that nobody has answered this detailed query, but I know that a lot of people read it. Thanks for taking a peek. I hope this solution helps others.

• a few questions about ESXi and SAN CF with HP P2000 G3

  Hello everyone!

  I am new to ESXi and SAN, then I need help for her.

  I have Encolosure C7000 system with 4 blades BL460c already installed ESXi 5.1U1 (HP custome ISO image). Everything works fine now, but I do not understand something:

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  My devices:

  01 7.1 HP BLc7000 CTO 3 IN LCD ROHS Encl.

  04 BL460c G8 servers HP FlexFabric 8.5 10 Gb 2 p 554FLB FIO blade adapter

  02 7.3 HP B-series 8/12 c BladeSystem SAN Switch

  01 HP P2000 G3 MSA FC Dual Controller

  Thanks for any help, sugession or comment!

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  Yes, it's a separate network used only for traffic management between ESXi hosts and vCenter - it is also the network used to connect to the environment - that's different, then the network used by your virtual machines

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  Yes the license keys can be reused, and if you use vCenter licenses will be managed by vCenter

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  Yes, you will be able to configure the San later - by default, the virtual machine will not see the SAn, as it is virtualized by your ESXi host - all the VM will see is a virtual SCSi disk - this doc's guide to vmware for storage - http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-511-storage-guide.pdf - you can visit the website of HP they might have documentation on configuring P2000 for vSphere -.

• I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

  I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

  You know the e-mail password what do you use? I lost over $ 30 on my old Apple ID because I couldn't get into the email and apple would not transfer my money to my new account.