Internet Explorer 9 problems with Vista and Windows 7, are there known issues that are causing to freeze or crash completely computers?

Similar Questions

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• problems with vista and microsoft set 32-bit or 64-bit.

  try to solve the problems with vista and microsoft fix it.  This error code 0 x 800400154 came up saying that they finish their using 32 bit and I have a 64 bit what they say.

  What version of the operating system Windows am I running?

  Windows 32-bit or 64-bit

  What Microsoft FixIt you try to run?  (There are MANY of them - they are simply the written scripts that do the manual steps in the KB article for you).

• is there a problem with vista and microsoft wifi?

  last week, I was on the internet with my router (belkin) wireless and all the sudden it stopped working. Only works in the same room. A computer in the shop and the tech claims that it was a matter of microsoft with vista and wifi. Is this true? She said I could either adjust the settings of the router with manfactur of the router or the upgrade to windows 7!

  Hello

  1. did you of recent changes on the computer?

  You can try to reset TCP/IP and Winsock.

  a. Click Start and type cmd in the start search box.

  b. in the list programs, right-click on cmd and select run as administrator.

  c. type netsh winsock reset at the command prompt and press the Enter key.

  d. do the same process to refresh the TCP/IP just replace the command typed with

  netsh interface ipv4 reset press enter

  netsh interface ipv6 reset press enter

  ipconfig/flushdns, press enter

  e. restart your computer.

  How to reset the Protocol Internet (TCP/IP)

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  You can also check the following items and see if it helps:

  In the Windows wireless network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• problems with Vista and msn

  my laptop had vista business on it originally, it crashed a year ago and the store put windows 7 Home Edition premium on it, last week I had to have my hard drive changed due to problems with it and computer scientist put my vista business back on it, I thought I was brilliant as always I like vista , the problem is now I can not MSN up on it it keeps saying IE he blocked, IE 9 will not download, I play Facebook games and many of them won't load properly, tried to install service pack 2 for vista and it goes on to say that I have to install service pack 1 in the first place , its already there and updated pack 2 but still will not download. Someone at - it answers or useful tips or advice they can give me to have an entirely new work laptop

  Yes 100% positive sp 1 is installed and updated, already tried all the links you have kindly posted, was trying to do it for 12 hrs before I posted this question, I have 64 bit but that he already knew who didn't need the computor to tell me, I finally returned to the it guy and he discovered that the lap top returned to the original IE 7 when the hard drive has changed it dosent msn so therefore all the problems, he finally put IE 9 for me and the two vista service packs and support now msn works finally done my f/b, so Happy Days

• Connection to the network with Vista and Windows 7 computers

  A similar question was answered before, but it's XP computers I use Vista and Windows 7.

  I have a Windows 7 computer that is part of a home network and who also has a connected printer. I want to access the printer from a Vista computer that is also on the network. When I try to connect to the Windows 7 computer, I get the error "logon failure: the user has not granted the type of logon required on this computer."

  I've seen solutions have been when the system tries to access the printer was an XP system. Can someone help me with this problem?

  Thank you

  Jim

  Hi Jim,.

  ·         Is file sharing enabled?

  ·         You have disabled password protection?

  Try to check the Advanced sharing settings in the network and sharing Center. To do this, follow these steps.

  a. click Start, Control Panel and then click network and sharing Center.

  b. now, click change advanced settings for sharing.

  c. now make sure that file and printer sharing is activated on and protected by password sharing is turned off.

  You can also see the article for more information:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know the results.

• Problem with Skype and Windows 8

  Received a new computer with Windows 8.  Skype came on the computer and worked great for a day.  Now it shows people I'm "unavailable" even if I'm registered.  When I make a call, it sounds just and rings and the person I call does not get notification.  Should I uninstall the Skype that came on the computer and download another version?  Any suggestions?  Please make simple answer - I'm NOT techie and I need Skype to work for my company!

  You use the Skype app?  If so try to install Skype to office and use it from the desktop.  The apps are a little more prone to disorder compared to the fuller program.

  How the desktop version of Skype on Windows 8?

  https://support.Skype.com/en/FAQ/FA12162/how-do-i-get-the-desktop-version-of-Skype-on-Windows-8

  You can also restore the system to use to return to happier times.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  See if the program can diagnose any problems with applications and correct.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Another third-party program may be causing a problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

  These options are also integrated to Windows 8.

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Problem with Vista and XP computers Internet connection sharing.

  I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.

  Thank you

  Oscar

  It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration.  Here are two ways to make it work:

  • Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700.  To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS.  The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.

  or:

  • Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700.  Both computers should be able to ping each other.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Quality of its poor window media player with vista and windows 7

  Since I bought my first Vista PC three years ago I never liked playing my music with Windows media player. This is because the sound quality is irritating. For some reason, the volume of any song keeps rising and falling when he plays with the media player but the same player sound perfectly with any other player. Note, in this case with windows Vista and when I upgraded to Windows 7 I have always noticed the same problem. Many of my friends who use Windows vista or windows 7 also complained about this problem.
  Does anyone have a solution to this? Because I can't play my songs with windows media player on my pc windows 7 and I had to keep my old windows xp just to play my songs.

  Hello

  It could be mainly mediocre speakers. Check you drivers.

  Control Panel - device - SOUNDS Manager - look for HD Audio Mine said RealTek High Definition Audio

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  1. go to the system manufacturer's website and search for the driver the newest download - SAVE - will click with the button straight on and RUN AS ADMIN
  (This is your rescue.) REBOOT after each installation of driver.

  NOTE: Driver Sound often rollback so check the version after installation and reboot to see if the version you
  installed is there, if not repeat - restart until it is. It may take several tries depending on the recommitments how he
  the fact.

  Then do the same for the site of the manufacturer of the device.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Many players have some equalizers and there are 3 rd party addins as FXsounds - DFX.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• iTunes won't download because of problem with Bounjour and Windows Installer

  I have windows vista and I can't use my itunes more.  I tried to download again and it says that there is a problem with C:\Program Files\Bounjour\about bonjour\.rtf.      It also says there is a problem with the Windows Installer Package to complete the download.  I can't find that anywhere in my computer files!  Help!

  I have windows vista and I can't use my itunes more.  I tried to download again and it says that there is a problem with C:\Program Files\Bounjour\about bonjour\.rtf.      It also says there is a problem with the Windows Installer Package to complete the download.  I can't find that anywhere in my computer files!  Help!

  Here are the Apple Discussions: itunes category, installation & Upgrading iTunes for Windows:
  http://discussions.Apple.com/forum.jspa?forumid=792 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problems with Adobe and Windows 8

  I am using the free trial of Creative Cloud market, but I came up against a HUGE problem. For the last four weeks, I tried in vain to get the CS6 to install on my computer. I have a Dell laptop with Windows 8 (which I'm already quite dislike), and I've tried a variety of methods to get the programs to install. I tried to use the adobe Download Manager (download fails after downloading each time), directly download programs (that I get an error when the instillation is 99% saying I don't have enough disk space, and I have a lot), modification of the ULA (?) code in my registry, in order to obtain instillation to run and you try to run the installation under window 7 settings does not. I am extremely frustrated, is there something I am doing wrong, or is this a common problem with Windows 8?

  Hi automatic movement.

  Try to disable the startup of microsoft services not viz antivirus etc (Ref: http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es - Windows.html ) and then try to install.

  You can also activate the hidden administrator account (Ref: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista / ) then try install in this account and check.

  Alternatively, you can solve with the Setup logs. CS5.5, CS5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

• Problem with AVG and Windows

  A.V.G. IN INTERFACE WITH M.S.

  * original title - A.Programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  If your computer is actually turn off and isn't just pass in "Sleep" or "Hibernation" during a scan, and this happens only when you run an analysis, then I must say that yes there is a problem with this security on this computer suite.

  Personally, I'm worried about the security suites.  They developed gradually bigger and bigger, which requires more system resources, and when they fit well with a particular operating system, they can interfere with its normal functions.  My preference is to use a good antivirus and Windows Firewall.

• Problems with Vista and Visual C++ runtime library

  I have vista. Recently, at the start, it doesn't let me log on.  Before connect you, I get a message saying C++ Runtime Library, then this application has requested the execution of finishing in a narrow path.  Any ideas why is this happenign and how to fix it?

  Hello

  try a restore of the system in safe mode for before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Problems with iTunes and Windows 7

  When I try to access a song from the library in iTunes, I get the following message "the song 'xxx' could not be used because the original file cannot be found. You want to locate? "Any suggestions how to solve this problem?

  It also is an exclamation in the far left column in the iTunes library.

  This can happen if you have NOT the "copy files in my itunes media folder when adding to my library itunes." selected, and you have a network drive mounted where you have added files. If you launch iTunes and the same drive is not mounted, iTunes think that files are missing.

  The same is true for any situation where the path to your media files: either mount you a network drive in the 'shared media folder"and change the share name"Press Kit "... This happens with local directories as well if you leave not iTunes manage your media files (which you should NEVER do) and you do not copy the files of your iTunes media folder. Changing the location of your media or any what part of the path to these files gives you this error.

  This can also happen if you have completed the transfer of songs to your iTunes media folder - even if iTunes displays the files in your media list. I added about 200 discs in my iTunes library (which I had managed for years with full ID3v2 v1 EPAS, and Custom embedded in each file tagging support). When my computer restarted because Microsoft updates installed automatically (although I had that option enabled OFF...), I lost access to all files that they appear in my library. Try to add the duplicate error message gives me.

  iTunes is the worst.

  My only solution is to delete all files with the. and restart Windows. Start itunes and then log out of your account. Reconnect to your iTunes account and add the files of 'missing' again. If you do not use iTunes, you may use a more robust solution like helium... by far my favorite.

  Good luck with your multimedia library. Best wishes

  Jase