Internet & internal access to view

Similar Questions

• Temporary Internet files Access Denied (System Administrator files and display already)

  Hello

  I am an administrator on my own computer. I was able to view the system folder.

  I've done here: C:\Users\rbucao\AppData\Local

  But I can't access the Temporary Internet Files folder. Can someone help me?

  Thank you.

  See this thread to access the files:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/da4392f7-961B-47d1-98a4-70e6046ac343
  http://Windows.Microsoft.com/en-us/Windows7/view-temporary-Internet-files
  To view temporary Internet files

  1. Open Internet Explorer by clicking the Start button. In the search box, typeInternet Explorer, then, in the list of results, click on Internet Explorer.

  2. Click Tools and then click Internet Options.

  3. Click the general tab and then, under browsing history, clickSettings.

  4. Temporary Internet files and history settings dialog box, click files.

• WRT54G VG/wusb54g V4 no internet no access

  WRT54G VG/wusb54g V4 no internet no access

  Everything worked fine last night and then collapsed. Reset, Hard Reset, called the cable operator. Can directly get Internet when pulgged in. Can connect to my network but the router now as everything, but I can't get online via the router.

  Manager hardware says that the apadter is very good...

  Any ideas?

  Upgade frimware I guess it's more of a replacement for the fixed... Yes!

• Access a view of Table with DAL | Documaker 12.2 - ODBC

  Hello

  We want to access a view using DAL during batch printing to access the information of the entity. This info would go on a separator Page in batch (paper) print.

  1 is this (a VIEW access) even possible?

  2 see. us DB functions in the documentation. I think that we need an ODBC connection, Manager of the DB for the view.

  Grateful if someone guide us to the required process.

  Thank you!

  Hello

  Yes it is possible, provided the machines where you run Documaker have access to the database, and the necessary drivers are configured correctly. You don't mention what version of Documaker you run or what platform it is being run. DAL documentation is available in different versions:

  • 12.0
  • 11.5
  • 11.3

  The process is generally the same for the Standard of Documaker editions:

  (1) set an INI setting DBHandler

  (2) implement the DAL functions for the DB operations

  The doc for 11.5 begins on page 43 of the above link and describes creating a DBHandler for different types of files and databases. You are not limited to ODBC, so check the documentation for your version of Documaker - some options are DB2, ODBC, SQL Server, Excel files, etc. Once you create the entry of DBHandler, you must set the DBTable who described the DISPLAY you will access. The DBTable has, as one of its options, the name of the DBHandler which must be used to access. Then, you create a DFD that defines the display (or table) - structure columns, data types and lengths. Most of this is detailed in the same document, although information on the creation of a DFD are located in other documents. You probably already - examples of DFD files, otherwise they are available in the documentation according to the Documaker version you are using. To 11.5, check the Documaker Studio guide.

  After you have defined the DBHandler and DBTable with her partner DFD, you must then implement the code. You probably want to consider opening and closing the connection at the beginning and at the end of the race, or even at the level of the lot so you do not adversely affect performance. You will implement the query at the same level as the separator page (which means that if you build pages of separation in a PostTransactionDAL, you will do the same for the connection.

  Example Configuration

  < dbtable:myview="">

  DBHandler = MYHANDLER

  DFD is c:\deflib\view. DFD

  < dbhandler:myhandler="">

  Install = SQW32-> SQInstallHandler

  Server = myserver

  User = documaker

  Passwd = ~ ENCRYPTED xxxx

  Note: remember to create the appropriate DFD!

  Code example - open/close

  * Open the connection to the database - made a batch or run level before you process transactions.

  * Open the dbTable called BIRD with the DBHandler set in the DBTable for BIRD. Optionally, you can specify a particular Manager in the DBOpen below.

  RC = DBOPEN ("MYVIEW",,"c:\fap\mstrres\run\deflib\view.dfd","READ");

  * manage return codes...

  * Close the connection when we finished. This should be done at the end of all operations processing.

  RC = DBClose ("BIRD");

  Example of Code - query

  To prepare the query variables. Variables preceded "REC".

  RC = DBPrepVars ("" BIRD"," REC");

  * manage the return code...

  find value and use.

  * query parameters are the value of the column, [,...] shown as COL1 = value1, COL2 = value2. Replace these values and the actual column names.

  * Note that DBFind accesses the FIRST record that matches the specified criteria.

  RC = DBFind("MYVIEW","REC","COL1","Value1","COL2","Value2");

  * You can replace with variables DAL here, so if you have a variable DAL containing a name of entity or similar,

  * rc = DBFind("MYVIEW","REC","PERSON_NAME",entityName);

  * manage return codes...

  * data access

  * using the variable prefix created in DBPrepVars (in this case, we use "REC"). The column names are those defined in the DFD. Example:

  print_it (REC. SOMECOLUMNNAME);

  Other Options

  You can also loop through the records by using the DBFirstRec and DBNextRec functions and evaluate each record to determine if it meets your criteria for use. However, it is recommended to use DBFind and get the exact record you need (also let the database do the work of localization of the registration right for you.

  Example:

  RC = DBPrepVars ("BIRD", "REC");

  RC = DBFirstRec ("BIRD", "REC");

  While rc = 1

  evaluate the data using REC.columnname

  * for example IF (REC. Col1 = 'Value1')...

  * a code...

  * If we have located the folder that we need, drop out of the loop

  BREAK;

  * background loop.

  RC = DBNextRec ("BIRD", "REC");

  WEND

  * more than code...

  Hope this helps,

  Andy

• How to access a view of database at the Complutense University of MADRID

  Hello

  I'm working on a project to migrate 10g and 11g.

  I migrated some views of the database to 10g to the ucm 11g schema schema.

  In 10g, I am able to access these objects to display in the Configuration Manager applet and I am not able to do the same thing in 11 g.

  Some can help me on how we get access to views of the DB in 11gUCM.

  Thanks in advance.

  Kind regards

  Vijay

  http://jonathanhult.com/blog/2013/11/use-database-view-WebCenter-content-schema-view/

  Jonathan

  http://jonathanhult.com

• Internal access to the servers of the network security

  Hi all

  I'm trying to set up a html to Internet to our internal virtual desktop computer connection.

  From our internal network, all network traffic through the login server located on the internal network, no problem.

  On the Internet, the connection is established with the Security Server, but when we try to access our desktop from view, security server tries to join the bureau with his private address that is not reachable from the demilitarized zone.

  Blast Secure Gateway seems to be configured correctly, and we try to avoid the NIC pluging 2nd on security for access to our private network server.

  Any idea about this problem?

  I read a lot of literature on this type of configuration, and it seems, that it should be possible without a second network adapter is not recommended.

  Thanks a lot for your help.

  Kind regards

  Sylvain

  To establish the Blast session via the Security Server, the SS will attempt to connect to the machine via TCP 22443 vDesktop, then Yes, you need to create a firewall rule that allows a NIC SS create a TCP 22443 with any IP virtual desktop connection.

  This is essentially the reason why people add 2 interfaces to SS - a Public-facing DMZ network (can connect on the internet) and another private-DMZ in front of a network (not exposed to the Internet, only life SS here).

  In the case of a single adapter, you must allow the Public DMZ network connections on your virtual desktop, which is not desirable in most cases.

  Architecture 2nic 'Typical' or town:

  Mighty Internet |   Public-DMZ |  Private-DMZ |   Internal network

  Customer > 443, 8443 |   SSPubNic |  SSPrivNIC > 22443 |  Any virtual office

  + firewall rules that allow the communication of the SS (above SSPrivNic probably deal) with CS

  Direct connections to the internal network from the Internet or Public-DMZ net are not allowed.

  In case of a single NETWORK adapter for your SS:

  Mighty Internet |        DMZ                 |   Internal network

  Customer > 443, 8443 |   SSPubNic > 22443 |  Any virtual office

  + firewall rules that allow the communication of the SS with CS

  In case of a single NETWORK adapter for your SS, you're allowing direct connections to a wide enough area of your network private directly from the network to the DMZ, which is exposed to the Internet and that should be attacked.

  It should work. If it is acceptable from the point of view of security is something different and more likely to your security administrator.

  Hope this helps and I hope that I forgot something important...

• No IPv4 Ipv6 Internet network access.

  Hi I have problems connecting to the internet from my room which I've never had before. One of the other computer is in another room and it says ipv4:Internet Ipv6:Local and mine Ipv6 without network access. Help?

  Hi Kin6591,
   
  1. temporarily disable the firewall and third-party antivirus on the computer for a test.
   
  2. check that the competent services
  =========================
  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
   
  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
   
  b. right click on "Peer Networking Grouping" service and choose Properties.
  c. check if the service is started; If this isn't the case, please click on the Start button and see if it works.
  d. you can also choose automatic next to startup type.
  e. click OK.
  f. Please repeat the above steps with another service: PNRP Machine Name Publication Service.
   
  3 modify the key to register IPv6 to enable IPV6

  ==========================

  
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  a. Click Start, type regedit in the search bar and then click regedit in the list programs.

   
  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.
   
  b. look for, and then click the following registry subkey:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
   
  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.
   
  d. double-click "DisabledComponents" registry key and change the value to 0.
   
  (If the key does not exist, please create the above key and assign a value of 0)
   
  e. exit the registry editor and then restart the computer.
   
  For more information, you can check the link below:
  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008
   
  http://support.Microsoft.com/kb/929852
   
  Hope this information is useful. Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• VPN - cannot subnets behind 2nd router internal access. Help.

  Hi guys,.

  Looking for a little help after a day of frustration. I'm really new to this and student so I know I'm doing something stupid. In any case, I bought an ASA 5505 and placed it between my cable Modem and router Cisco 3745. The external interface on the ASA is dhcp, the inside interface is 192.168.100.1. The external interface of the 3745 is 192.168.100.2 and inside is 192.168.1.1. The VPN pool is 192.168.200.10 - 192.168.200.10.

  These are the problems...

  1. when I set up a VPN to ASA session, I can ping and access resources dierectly connected to interfaces of the ASA and the 192.168.100.0 internal ASA network. However, I can't access any resource behind the 3745. I can't even ping 192.168.1.1.

  2. Although I believe I sent split tunnel, I can't turn to the internet when connected to the VPN.

  Here's my network and my config ASA topology and router config...

  ASA...

  ASA Version 8.2 (5)

  !

  poog-fw1 hostname

  Poog domain name

  activate the password * encrypted

  encrypted

  names of

  name 192.168.100.2 RouterWAN

  internal name 192.168.100.0

  name 192.168.200.0 VPN

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.100.1 address 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  boot system Disk0: / asa825 - k8.bin

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  Server name 167.206.245.129

  Server name 167.206.245.130

  Poog domain name

  permit same-security-traffic intra-interface

  object-group, VPN network

  the RouterWAN object-group network

  object-group network RouterWAN-01

  object-group network RouterWAN-02

  object-group network RouterWAN-03

  object-group network RouterWAN-04

  object-group network RouterWAN-05

  the obj_any object-group network

  network of subject-group obj_any-01

  object-group network obj - 0.0.0.0

  object-group network iphone

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  outside_access_in list extended access permitted tcp VPN 255.255.255.0 everything

  Comment from outside_access_in-Telnet access on the router list

  outside_access_in list extended access permit tcp any interface outside eq telnet

  Comment from outside_access_in-access IP cameras list

  outside_access_in list extended access allowed object-group TCPUDP any interface apart from 1021 1022 range

  outside_access_in list extended access permit tcp any interface outside eq www

  Comment from outside_access_in-list of FTP access to NAS

  outside_access_in list extended access permit tcp any interface outside eq ftp

  Comment from outside_access_in-VNC server WX access list

  outside_access_in list extended access permit tcp any interface outside eq 5900

  outside_access_in list extended access permit tcp any interface outside eq https

  Comment from outside_access_in-Telnet access on the router list

  Comment from outside_access_in-access IP cameras list

  Comment from outside_access_in-list of FTP access to NAS

  Comment from outside_access_in-VNC server WX access list

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  inside_nat0_outbound to access extended list internal ip 255.255.255.0 allow VPN 255.255.255.0

  standard access-list internal split tunnel permit 255.255.255.0

  host of standard splitting allowed access list 192.168.1.0 tunnel

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  local pool VPNPOOL 192.168.200.10 - 192.168.200.20 255.255.255.0 IP mask

  IP verify reverse path to the outside interface

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 647.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Overall 101 (external) interface

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 101 0.0.0.0 0.0.0.0

  public static tcp (indoor, outdoor) interface telnet RouterWAN telnet netmask 255.255.255.255

  static (inside, inside) tcp 5900 5900 RouterWAN netmask 255.255.255.255 interface

  public static tcp (indoor, outdoor) interface ftp RouterWAN ftp netmask 255.255.255.255

  1021 RouterWAN 1021 netmask 255.255.255.255 static interface tcp (indoor, outdoor)

  static (inside, inside) tcp 1022 1022 RouterWAN netmask 255.255.255.255 interface

  Access-group outside_access_in in interface outside

  !

  router RIP

  internal network

  default information are created

  version 2

  No Auto-resume

  !

  Route inside 192.168.1.0 255.255.255.0 RouterWAN 1

  Route inside VPN 255.255.255.0 192.168.100.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http internal 255.255.255.0 inside

  http VPN 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Telnet internal 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  dhcpd address RouterWAN-RouterWAN inside

  dhcpd auto_config outside interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  value of server DNS 167.206.245.129

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  Split-tunnel-network-list value split tunnel

  internal Clientless group strategy

  attributes without Group Policy client

  VPN-tunnel-Protocol webvpn

  WebVPN

  the value of the URL - list VPN_Book_Marks

  internal AnyConnect group strategy

  attributes AnyConnect-group policy

  Welcome To My Network Banner value

  value of server DNS 167.206.245.129

  VPN-tunnel-Protocol svc webvpn

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list no

  Poog value by default-field

  WebVPN

  the value of the URL - list VPN_Book_Marks

  SVC Dungeon-Installer installed

  SVC request no svc default

  username ogonzalez encrypted password privilege 0 0VrbklOhGRHipw79

  username ogonzalez attributes

  Clientless VPN-group-policy

  username ymcpO334smdskkpl encrypted password privilege 0 jgonzalez

  jgonzalez username attributes

  AnyConnect VPN-group-policy

  type tunnel-group RAVPN remote access

  attributes global-tunnel-group RAVPN

  address VPNPOOL pool

  tunnel-group RAVPN webvpn-attributes

  enable RAVPN group-alias

  allow group-url https://69.121.142.156/RAVPN

  tunnel-group AnyConnect type remote access

  tunnel-group AnyConnect General attributes

  address VPNPOOL pool

  strategy-group-by default AnyConnect

  tunnel-group AnyConnect webvpn-attributes

  enable AnyConnect group-alias

  allow group-url https://69.121.142.156/AnyConnect

  tunnel-group type Clientless Remote access

  tunnel-group Clientless General attributes

  Clientless by default-group-policy

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:7d91e2ad8d7a86c40860fa8a1b117271

  : end

  Router...

  Current configuration: 1922 bytes

  !

  version 12.3

  horodateurs service debug uptime

  Log service timestamps uptime

  no password encryption service

  !

  hostname poog_rtr1

  !

  boot-start-marker

  boot-end-marker

  !

  no set record in buffered memory

  no console logging

  no logging monitor

  enable secret 5 *.

  !

  No aaa new-model

  IP subnet zero

  !

  !

  IP cef

  no ip domain search

  DHCP excluded-address IP 192.168.1.1 192.168.1.150

  !

  IP dhcp DHCP1 pool

  import all

  network 192.168.1.0 255.255.255.0

  default router 192.168.1.1

  DNS-server 167.206.245.129 167.206.245.130

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  username * password privilege 15 0 *.

  !

  !

  !

  !

  interface Loopback0

  IP 1.1.1.1 255.255.255.255

  !

  interface FastEthernet0/0

  LAN description

  IP 192.168.1.1 255.255.255.0

  IP nat inside

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/1

  WAN description

  DHCP IP address

  NAT outside IP

  automatic duplex

  automatic speed

  !

  router RIP

  version 2

  network 192.168.1.0

  network 192.168.100.0

  network 192.168.200.0

  No Auto-resume

  !

  IP nat inside source list 1 interface FastEthernet0/1 overload

  IP nat inside source static tcp 192.168.1.100 80 interface FastEthernet0/1 80

  IP nat inside source static tcp 192.168.1.13 5900 interface FastEthernet0/1 5900

  IP nat inside source static tcp 192.168.1.12 1022 interface FastEthernet0/1 1022

  IP nat inside source static tcp 192.168.1.11 1021 interface FastEthernet0/1 1021

  IP nat inside source static tcp 192.168.1.100 21 interface FastEthernet0/1 21

  IP nat inside source static tcp 192.168.1.1 23 interface FastEthernet0/1 23

  IP http server

  local IP http authentication

  IP classless

  IP route 192.168.200.0 255.255.255.0 FastEthernet0/1

  !

  !

  Remark SDM_ACL category of access list 1 = 16

  access-list 1 permit one

  not run cdp

  !

  !

  !

  !

  !

  !

  !

  Dial-peer cor custom

  !

  !

  !

  entry door

  !

  Banner motd ^ C

  UNAUTHORIZED ACCESS IS STRICTLY PROHIBITED! *****^C

  !

  Line con 0

  line to 0

  line vty 0 4

  local connection

  !

  end

  "192.168.100.0---> 192.168.1.0 I DO NOT get ping responses."

  Please add "inspect icmp" in politics of inspection_default class as shown below.

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  inspect the icmp

  I hope this helps.

  Evaluate the useful ticket.

  Thank you

• External "URL" setting breaks internal access...

  Hi all

  I saw works well and overnight last configuration external access from home.  I have install a security server, created the file locked.properties on the Security Server and added external url the server security to the external "URL" field of the view manager.  I could connect and then home.

  However, when I arrived at work this morning I can't connect directly to the server viewmanager.  View Client generates the following error message;

  View server connection authentication failed. Initialization failed when connecting to the server "(null)".

  If I remove the external URL field and restart the view Manager service, can then connect to internally, I am then unable to connect at home.

  I guess it's possible to have a configuration that allows internal and external connections?

  Thank you

  Shaun

  Hi Shaun,

  The last posting in this thread of DMZ servers and server connection security might be useful to explain the line of communication between virtual machines, security servers and connection servers.

  I'm open to correction here, but it would require that the security servers and connection are paired so that if you set up an external connection all connections from that server to download connection through his security server, whether they are inside or outside your network of reading

  I am also open to correction that vmware is or at least doesn't limit you to the deployment of a number of brokers of the connection when it came to their license agreements which could be a solution to your problem of internal & external connection.

  Don't have not setup pilot to test so take everything with a large pinch of salt

• Can't access Conversation view under the view menu. With the help of 38.0a1 every day. Any ideas?

  I can access the Conversation view under the view menu in TB version final candidate 31.4.0. But he don't see under daily 38.0a1 of 64-bit version on different computers. Any help appreciated.

  THX

  Ok. Do not take into account. Apparently the conversation view is an Extension to tuberculosis, only not part of the base product. Hope that I would not lose too much of your time. Live and learn.

  Thank you
  Doug

• How and where can I find my Internet speed access #?

  I need to know my Internet access speed. I have no idea where to find it.

  I need to know my Internet access speed. I have no idea where to find it.

  Purchase Internet access speed can be determined by examining the Bill, you pay your Internet service provider.  Society for modems cables cable, phone company for DSL (in most cases) and so on (Satellite, Dial-Up, cell, etc.)
   
  Should how fast you pay for?  It will be generally have a download & download speed.  The download speed is generally less than the download speed - although they may be equal.
   
  -Then, you can compare what you pay with various (you'll want to make several different of them, they all report differently depending on your location, time of day, issues between you and test site, etc.) of web sites that help you determine your speed.
   
  http://www.dslreports.com/stest
  http://Speakeasy.NET/Speedtest/
   
  There are a couple in the United States.

• Internet - online access problems

  I use a wireless home network.  When you access some sites internet the system automatically strikes me offline, and I have to click on tools and work offline button go back online.  For some addresses it keeps switch to offline mode and will not allow me to go online to access the site.  If I go to a different address, it works normally.

  How can I solve this problem?

  Thanks for the help

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Internal access to the site at the remote location via wifi

  We have an internal site to A location and we have a 2 layer hose B location. When you use the ethernet connection, site B can access the site. What we want to do, is allow them to access via wifi with the VPN site to site (who currently works) hosted by of our Sonicwall.

  How this is a problem is our network is separate; wifi at site B is on the DMZ. We added access rules to allow the DMZ-> VPN traffic on the site, which did not work; No ping, no traffic, no communication. We've also added policy NAT, same story.

  My theory on why it does not work is because the VPN tunnel to one SW to another is related to X 0, but even after enabling access, it's the same result.

  Any help would be appreciated. Thank you all!

  Hello

  Is DMZ subnet to site B added under 'Local networks' VPN B Site and under 'Remote Networks' policy in Site A VPN policy? If you have then SonicWALL auto-créera access rules to allow WiFi traffic. Basically, you need to add the DMZ subnet in site B the VPN policy.

  You can also see the article: https://support.software.dell.com/kb/sw7725

  #IWork4Dell

• router Cisco 871 no internet no access

  I am studying and practicing fo my ccnent and I am very new to cisco routers and so far have done well until I tried to access the internet. I have a router 871 which has a switch catalyst 2950 branch above. connected to the switch, is this computer, a router cascading and an external network drive. connected to router cascading is an xbox, ps3 and another computer. on both computers I ping the router and the switch but I can't reach beyond the router to lynksis router that I used to connect to my network. also pingin one computer on the other give me "destination host unreachable".

  This is my config running. Thanks to SD for any advice

  Building configuration...

  Current configuration: 3045 bytes

  !

  ! Last modification of the configuration at 11:25:35 UTC Wednesday, January 1, 2014

  ! NVRAM config updated 11:25:45 UTC Wednesday, January 1, 2014

  !

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  hostname VanRouter

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  enable secret 5 $1$ $0tzK iA3tCXqYHVOHPrM1N2yig0

  !

  No aaa new-model

  !

  Crypto pki trustpoint TP-self-signed-3288281326

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 3288281326

  revocation checking no

  rsakeypair TP-self-signed-3288281326

  !

  !

  TP-self-signed-3288281326 crypto pki certificate chain

  self-signed certificate 02

  30820241 308201AA A0030201 02020102 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 33323838 32383133 6174652D 3236301E 170 3134 30313031 31313232

  33365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 33 32383832 65642D

  38313332 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100CD3C D7B45599 C442BB9F 7C407C6F 4443DE93 C266494F 5DEE207B 66C9E95A

  A6D99B5F 2880A97E DBB0FB69 745870BA BF29BEE6 23242 HAS 17 A271AAAE 48349CCA

  91 66093 86663331 BA816DB4 6029C7FF 6229F2F3 FE81F9AE 5E4EACBB 1541878C

  A0C89C66 DEAE6AE5 BF372DB7 C8F3E6D5 ED28DC8E C06B60BD 06EC0985 DDF58C07

  010001A 3 69306730 1 130101 FF040530 030101FF 30140603 0F060355 AC8D0203

  551D 1104 0956616E 0D300B82 526F7574 6572301F 23041830 16801483 0603551D

  05465 D 05 D3C5E672 1 060355 1D0E0416 0414836B 91CEBC30 D7B0841A 6BC919AF

  C919AF05 465D05D3 C5E672D7 B0841A91 CEBC300D 4886F70D 01010405 A 06092, 86

  002F41E8 BA660122 148D3F06 8CADBD62 7E26F5A6 506A60EC 00038181 36B 37541

  58F5C139 B8DE5B32 CC1B258B 57988841 3123227F B69D432D 52CC836F 5E51DE5C

  C4B01B53 16F4CC5A BEC27BC0 83AD91B5 1F56181C E3901360 32 54 C 95549 HAS 14551

  18F92BB0 2000BFB9 E29536AF 223F032A 683B8E66 9E554E02 D1E7F631 704A66F6

  222590DC B5

  quit smoking

  dot11 syslog

  IP source-route

  !

  !

  DHCP excluded-address IP 192.168.100.1 192.168.100.10

  !

  van pool dhcp IP

  network 192.168.100.0 255.255.255.0

  default router 192.168.100.1

  Server DNS 8.8.8.8 8.8.4.4

  !

  !

  IP cef

  no ip domain search

  8.8.8.8 IP name-server

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  username 0 privilege 15 password van van

  !

  !

  !

  Archives

  The config log

  hidekeys

  !

  !

  !

  !

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  DHCP IP address

  automatic duplex

  automatic speed

  !

  interface Vlan1

  IP 192.168.100.1 address 255.255.255.0

  !

  IP forward-Protocol ND

  IP http server

  local IP http authentication

  IP http secure server

  !

  !

  !

  !

  !

  !

  !

  !

  control plan

  !

  !

  Line con 0

  Van password

  Synchronous recording

  no activation of the modem

  line to 0

  line vty 0 4

  privilege level 15

  vantel password

  Synchronous recording

  local connection

  transport input telnet ssh

  !

  max-task-time 5000 Planner

  end

  VanRouter #.

  If you can ping the router on then you should be able to ping from the PC on. Try searching for the source of your ping to the IP Address of the VLAN 1 interface on your router and see if it works.
  In addition, you don't need these static routes:
  IP route 0.0.0.0 0.0.0.0 71.246.236.11
  IP route 0.0.0.0 0.0.0.0 10.1.41.79
  Route IP 192.168.0.0 255.255.255.0 192.168.1.1
  IP route 192.168.1.0 255.255.255.0 192.168.1.1
  IP route 192.168.100.0 255.255.255.0 192.168.100.2

  If you don't want to show up at static routing, you might be able to get directions to RIP on the Linksys. You must have access to the Linksys however.

  At the end of the day, probably you will need to configure NAT on the interface to the Linksys and the VLAN1 interface and then Overload:

  Int fa 0/4
  IP NAT outside

  Int vlan1
  IP NAT inside

  Access-list 10
  Permit 192.168.100.0 0.0.0.255

  IP nat inside source list 10 interface f 0/4 overload

  Sent by Cisco Support technique iPhone App

• Internet only access ACL (not answer)

  Hello

  We have a new WLC set up in a remote desktop control 4 access points and must restrict access to our comments of SSID only internet access. It's the way the network is currently configured:

  3750G Switch:

  Two VLAN for layer 3, one for the inside network and internet access company and one guest access to the internet only. These two have addresses for assistance on them pointing to our DHCP server that has extended for comments and the Corporate VLAN. The controller is located in a trunk port with an address on our subnet management and the AP on access on the same subnet for management ports. Subnets are as follows:

  10.80.27.0 - wireless Corporate (vlan 27)

  10.80.28.0 - Wireless comments (vlan 28)

  10.80.10.0 - management (vlan 10)

  (In addition, we have several other VLANs on a 172.16.0.0/16 and the 10.80.X.0/24 network)

  To limit access to clients without comment thread, I tried to add the following ACL on vlan 28 thinking this would allow requests DHCP and DNS for wireless and web access clients while denying access to others within the network resources:

  IP extended ACL UNTRUSTED access list

  permit udp 10.80.28.0 0.0.0.255 any eq area

  permit udp 10.80.28.0 0.0.0.255 any eq bootps bootpc

  permit tcp 10.80.28.0 0.0.0.255 any eq www

  permit tcp 10.80.0.0 0.0.255.255 any what eq 443

  deny ip 10.80.28.0 0.0.0.255 10.0.0.0 0.255.255.255

  deny ip 10.80.28.0 0.0.0.255 172.16.0.0 0.0.255.255

  So basically, without applied ACL, a customer receives an address from the DHCP server without problem and is able to surf on the internet as well as all inside resources. When I apply the ACL to the VLANs, customers can no longer receive an IP address from the DHCP server. However, if a customer had already received an address before the application of the ACL, that the customer is able to navigate while being denied access to the network when the ACL is applied. Which is the desired effect. It seems that the problem is access to the DHCP server when the ACL is in place. Is misconfigured my ACL or I go just about it entirely the wrong way?

  (my apologies for the too wordy explanation, wanted to make sure I had enough detail in there)

  I had a problem like this before.

  I shared my bootps / bootpc in each for his own line and it started working

  Something like

  Note DHCP server

  permit udp 10.80.28.0 0.0.0.255 eq bootpc host

  permit udp 10.80.28.0 0.0.0.255 eq bootps host

  What if you add the log after deny it. Logs show something? Send to a syslog might help filtering