Windows 7 USB Memory stick found

Similar Questions

• Corruption of USB memory stick

  I have a key USB Verbatim that I use to synchronize files between a laptop running Vista Home Premium and your desktop under XP Professional SP3.

  By 'synchronize', I mean just to run a batch file to copy files.  Nothing complicated.

  Since upgrading my Vista laptop, I started to get the corruption of files on my USB key.  So far, this has happened twice.  I first noticed the corruption because it lacked (1) the files I copied on the memory stick, and Vista (2) began to complain when I plug in the USB key and offer to "scan and difficulty" it.  I ran chkdsk on the USB drive, which found errors.  CHKDSK said she 'removed the entries in the folder' and 'converted to strings lost files.  Running of chkdsk has not yet found any errors.  I've spent a lot of time to rebuild the data corrupted on my USB backup I had done elsewhere and has been subsequently upward and re-run.

  Since I first corruption running chkdsk on a regular basis (even the time I plug the memory stick) and careful to always use surely "remove hardware" on both machines before unplugging the drive.  I was also careful not to let my laptop to sleep so that the USB plugged, but it shouldn't matter.

  This morning, I noticed that corruption had resurfaced.  I've been running chkdsk often, I'm sure it's happened when the files to deal with USB stick on the Vista laptop this morning.

  What is the guilty likily here?  It seems that it's the hardware of USB memory stick or a bug in Windows Vista?  A person offers advice such as how to limit?

  DietCokeAddict,
  Thank you for visiting the Microsoft Answers community forum.

  Looks like you did a good job to limit the problem.  I would certainly continue to run chkdsk on the USB memory key and make remove them hardware safely shows before withdrawing.  There is an update for Vista that is specifically for USB devices that may solve your problem.  I had it set a number of different problems with USB devices.

  Try this and let us know if it solves your problem:

  Rollup cumulative update for USB in Windows Vista Basic components
  http://support.Microsoft.com/kb/941600

  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't Windows media player to connect to my USB memory stick.

  I went to my memory stick allows you to put music on it and windows media player does not connect to it. Because it does not connect it allows me to sync music....

  I checked my computer and the USB memory key works very well over there... I can see it and windows media player will play the songs that are on it.

  I used the hardware diagnostic tool and it came with 4 ALERTS

  Driver USB ms problem... SD... XD/SM and CF Reader.

  I tried a few different restore points... .but he stll do not work.

  Thanks in advance for your time.

  Because the USB works on the PC, appears not a hardware problem, but a kind of connection problem with Media Player.  Please repost your question to the Windows Media Player Discussion Group at: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.multimedia.windows.mediaplayer where experts in Media Player will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L755-144 - USB memory stick problem

  I have a L755-144 Satellite with Windows 7 Home Premium.
  I tried two USB keys with this computer. It works fine, the other has the following problem:

  When plugged in the first time, a driver loaded for her and then he saw in devices and printers, but not in the computer. It is not possible to browse the files in devices and printers for this stick and it does not activate the remove material option safely; the files that are on it can not be seen.

  I installed the latest driver USB from Toshiba, but that made no difference. Should I give up and use a different memory stick, or is there something else I could do to make this one work?

  > I tried two memory sticks USB with this computer. It works fine, the other has the following problem

  I think that there is a compatibility problem between the USB and the USB key because the other key USB worked fine so I put t think that it s USB port or driver issue.

• New Installation of Windows 10 using Memory Stick

  Installed Windows 10 of a download of Microsoft with the iso installed on a memory stick with training camp. After you have created a Bootcamp partition I couldn't install Windows on Bootcamp partition due to an error message 'GPT Partition Style'. Reformatting of the Windows installation screen did not help. The solution came as a surprise. I was start from the windows 'disc' when I should have used the IEF 'drive '. After starting the EFI, reformatting of the Bootcamp partition disk worked and the installation went well, with the exception of the Setup screen was too small to read easily. Fortunately, I was familiar with the installation of the failure of the previous installation screens.

  Windows 10 works fine now. The link below is what led me to a solution.

  http://code-zest.blogspot.com/2015/02/Windows-8-install-GPT-partition-style.html

  Your MAC supports two installation methods, inherited from the BIOS/MBR (used for XP, Vista, W7) and EFI/GPT (W8 +, W10). The first method requires a hybrid MBR to 'map' the GPT to a MBR-look-alike. EFI/GPT boots are 'native' and faster than the legacy method.

• HP OfficeJet Pro L7650 all-in-one can not recognize USB memory stick 8 GB

  I try to scan a document on a 8 GB USB key and received the error "Unknown device" so that it works very well with my old USB 512 MB key.  How can I use a memory stick 8 GB with this printer?   Thanks in advance for any assistance!

  Unfortunately we do not have this printer driver to support large memory keys USB Vicky. HP all-in-One printers are supported up to 1 GB memory sticks only.

• No audio, cd/dvd devices does not work, can not update via Microsoft Update, usb memory sticks not recognized and much more

  The initial problem was no audio sound on CD.  The computer had other system sounds.  I uninstalled the Realtek drivers and downloaded from the website computer and reinstalled.  Still the same problem. I tried to adjust the volume control and clicked the speaker at the bottom on the right bar.  I got a message saying there is no mixer device and the small speaker disappeared and reappeared even after several reboots.  There is also an error "no audio device".

  After reboot, the computer gives this error message: "Generic Host process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

  While trying to find a solution on the web, I discovered that the computer does not recognize the usb key,
  It won't restore to an earlier time,
  the CD/DVD drive will not run the data disks

  and Windows Update will not update.  The error message said: "the site has encountered a problem and cannot display the page you are trying to show."  There is an error number: 0x800706BE I tried to find this error message on the MS knowledge base, but it is not listed.

  The last Windows Update was on April 16, 2009 so I tried to restore to April 15, but it says 'system restore is not able to protect your computer.  Restart your computer and restart System Restore. "    After the reboot, the same thing happens.

  Any help is appreciated.

  The data is not "hostage." Pull the disk and put it in a box disc or it slave to a working computer and retrieve the data. If you don't have an additional computer you will need to borrow a friend or with the machine at a tech. You can also try the o with a Linux Live CD boot. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.

  Whatever you do, do not install Windows without test material. If the hardware is at fault, software solutions like reinstalling Windows will be unnecessary. MS - MVP - Elephant Boy computers - don't panic!

• HP external Hard Drive 1 TB and other USB memory storage devices do not install successfully

  My notebook ACER Aspire with Windows 7 operating system is installed correctly all of a sudden no new plug-and-play memory to storage devices that are normally. Previously used USB memory sticks are always work well when they are connected. This could be the cause and how can it be solved?

  If it of the device that has the problem and its not connected via a hub, check it out on all ports, then check on another PC

• Windows 7 not recognizing memory sticks in slots USB

  Hi when I put the memory stick to any USB on the computer, I receive a message first came to ask me to format the memory stick. I even get this if I enclose my TomTom GPS on the same USB slot.   If I click on the drive designation, I get the following message:

  {{K:drive is not accessible. The volume does not contain a recognized file system. Make sure that all required file system drives are loaded and that the volume is not corrupted.}}

  I know that the sticks of memory are OK, as I have tried several and also tried all the USB slots on the computer and another computer.

  I don't remember doing anything for having caused the problem since the last using the disks of the USP.

  Using windows 7 Home premium.

  Anyone know what is the problem and how to fix it please?

  Concerning

  Windows7RULES

  Finally, I used a data recovery program.  Recover all files and files downloaded from the sticks of memory on my hard drive.  Formatted in NTFS and I am now able to use chopsticks as well as my recovered data, the sticks of memory.

  All sorted

  Concerning

• Memory stick does not work when insalled in plugin usb

  I bought a memory stick attached, it keeps raising no malfunction of the driver software

  A memory stick should not require some special drivers run they run on inbox drivers. If the drivers that came with Windows itself lack so none of the memory key usb will work.

  If you have a different memory stick try to plug into this computer and check if it works.

  If you have access to another computer test plug this memory stick to another computer and check if it works.

  On the computer that has a problem try equipped with a utility spell system "sfc file analysis".

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista

  In addition to this, you can try the steps of troubleshooting on this link: http://www.kingston.com/support/usbflashdrives/faq/pcdt_20.asp

• Windows 10 0 - x 80070005-0xA003 memory stick error.

  OT: Error memory stick Windows 10.

  Receive error message 0 - x 80070005-0xA003 so painful to download Windows 10 to a Memory stick, for later installation.   200 GB available on the partition active main and memory stick is empty (8 GB).

  Follow the instructions to download the. ISO then creates a bootable copy:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• How to transfer photos to computer Olypus softwear to a memory stick using the USB port on the computer?

  Have a ceiling of memory 2 GB Kingston Data Traveler 100 memory stick (w) technology. Want to down load a series of photos already on computer with master Olypus softwear registration. Should what procedures I use to achieve this? Please specify all measures to achieve this transfer process. Thank you

  For the task that you describe... I do not see the need
  for the Olympus software.

  Insert data traveler into a USB port and go...
  Start / computer.

  The data traveler must be recognized as a
  Removable drive with a drive letter.

  OK... now that you know the drive letter... If you right
  Click a selected group photos or an entire folder
  You should be able to choose... Send to / removable
  Disk (? :))..) .This must copy the pictures to the data
  Traveler

  Make sure that the photos are in one or more records because
  the number of photos that you can copy to the directory root
  may be very limited. And you will receive the following error:

  "Impossible to copy the XXXX: failed to create the directory or file.

• I plug memory stick. It came with USB motto malfuntioned. work on neighbours computer. so does not decompose

  I plug memory stick that works the computer to friends. I have USB device malfuntioned. Help

  Plug in your device and restart the computer, also if you use a hub of AC connect your device directly to your computer. If these 2 steps not to reinstall the driver.

• Transfer of records to memory stick using Windows Explorer works not properly. (Windows 7 64-bit)

  I use sticks of memory to copy my photos and documents from my computer for backups of these elements.

  I currently have about 8 000 photos that I try to copy computer to stick.

  The total size of the pictures is about 18 GB, and I use 32 GB sticks. I have four different sticks, from three different manufacturers, and the problem occurs on all four sticks.

  The photos are in "My pictures", who are then in albums, sous-albums, then sub-sub-albums, everything in "Images", which is located in "libraries."

  Reproduction, which has more than 12 hours, it looks like it works OK, but when I check the files on the memory stick a lot are missing!

  Some photos are missing from some albums, and many albums is not there at all.

  I did this for several years, but this problem just started. (It is about six weeks, since I've finally done it.)

  Can someone tell me what I am wrong dong?

  Not all USB keys are of equal quality.

  Personally I would use a portable hard drive.

  12 hours for 18 GB of data is excessive

  Assuming that a brand PC made the mistake of using win update for "Recommended updates" rather than just Important?

  A run/installed any new utility prior to the problem occurring?