Internet via the VPN tunnel

Similar Questions

• Cannot use Internet on the VPN connection

  Hello

  I used a cisco customer version 4.0.3 installed on my laptop to connect to the VPN server.

  When my VPN client is connected to a remote VPN server via a wired LAN to my site office, I can't use the Internet at the same time. I have him this might not be possible unless "split tunnel" is allowed in the side server. When I connect to the server via the Wi - Fi network in the same office, I can use the Internet. It made me confused, so I checked the IP address of my network bridge by using the command 'ipconfig '. He showed the two IPS 10.100.128.1 and 10.100.128.2 for the wireless network connection and a single IP 10.69.225.70 for the wired network connection.

  How can you explin the situation of the two above? Two default gateways allowed me to use the Internet when my client is connected to the server through the network wi - Fi? The disable "split tunnel" function in the server VPN has blocked me form using the Internet, the connection to the server via the cable network? I don't think so. Why?

  When my client is connected to the VPN server over the network domestic Wi - Fi home that has only a single default gateway, 192.168.0.1. I have no problem with the use of the Internet. How can you explain this bizarre situation? I really want to use Internet through a wired network and wireless at the other site office who have only one gateway respectively. Could you explain that?

  Thank you very much... Jae

  You are welcome, I hope we can fix it all.

  ComboFix set malware entries that could corrupt your browser for a malfunction. WinSockFix to fix corruptions that may have caused by the VPN software. But I'm not a type of corruption is likely to not do not work and https http to work.

  Now, let me understand the current issue. You cannot connect to the internet even the VPN is disconnected correct?

  I have a few questions and need of some outputs of diagnosis

  (1) I think that you are in a hotel. Using wireless? Can it be quota restrictions by the hotel management?

  2) connect via VPN. You have established the connection, my neighbors network at the office with the right button > properties. Now, right-click of Cisco VPN Adapter, and then click on repair. And then disconnect your VPN client

  (3) once you disconnect a VPN, do the repair, even for your Local network connection or a wireless connection. The VPN is disconnected, run the following in the command line

  Nslookup

  www.Google.com

  then run

  tracert 64.156.132.140

  then run

  impression of the route

  And after the output of these commands here.

• Authentication of ACS in the VPN tunnel

  We want to enable the ACS authentication to connect to different routers (Cisco 881 s) we have obtained who are communicating with our WAN via VPN tunnels. We want to avoid using public IP of the router to communicate and pass information to user/password with the ACS server and rely on the IP of the server private instead. The problem is that external interfaces of the router connect to the Internet using public IP addresses and when the router wishes to communicate with the ACS server it will use its IP of the interface to the public and which will fail. We can ping on the server of course when we set the source to the internal LAN IP.

  The question is are there any way to have the router contact ACS through the VPN tunnel using a private IP address?

  config is used and tested with success on local equipment:

  AAA new-model

  RADIUS-server host 10.x.x.x single-connection key xxxxxx

  AAA authentication login Ganymede-local group local Ganymede

  AAA authorization commands x Ganymede-local group Ganymede + if authenticated

  AAA authorization exec Ganymede-local group Ganymede + authenticated if

  See the establishment of privileges exec level x

  line vty 0 4

  Ganymede-local authentication login

  authorization controls Ganymede-local x

  -ACS ping to the router (WAN via VPN connection) when using public IP address of the router as the source address:

  RT881 #ping 10.x.x.x

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 10.x.x.x, time-out is 2 seconds:

  .....

  Success rate is 0% (0/5)

  -ACS ping to the router (WAN via VPN connection) when using IP private of the LAN as source address:

  RT881 #ping source 10.x.x.1 10.x.x.x

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 10.x.x.x, time-out is 2 seconds:

  Packet sent with a source address of 10.x.x.1

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 72/72/76 ms

  Looking forward to your responses and suggestions.

  Thanks, M.

  Hey Maher,

  You can use the command 'Ganymede-source interface ip' or 'RADIUS source-interface ip' for your scenario.

  I hope this helps!

  Kind regards

  Assia

• ASA Syslog via a VPN Tunnel

  Hi all

  I have a little problem concerning ASA and syslogs. I have a tunnel from site to site between a local ASA and ASA distance. Behind the ASA local, I have a central syslog server (which has no ASA as default gateway) which collects messages from all network devices and I want to get messages from the ASA remote as well.

  The tunnel protects traffic between local networks behind each ASA, which includes ASA inside remote interface as well. The problem is that if I specify on the SAA distance my syslog server it does not pass through the VPN tunnel. The ASA remote sees my server syslog as being 'outside' so he's using the external IP address as the source-interface for the syslog message. Which of course does not pass through the tunnel. As much as I know there is no way to configure the interface source for logging under the SAA, that you can do on a normal IOS router.

  I've found a few documents explaining this Setup on CCO, but they all imply I have extend the list for interesting traffic to access allow remote UDP/514 of the PIX traffic outside my local syslog server interface. This isn't something I want to do what I would get in routing complication in my LAN with a public IP address of the ASA remote.

  Any suggestions? I thought I could use some sort of NAT on the ASA remote so that all traffic for my local network a source the remote PIX is translated on the inside interface, which in theory should pass the package via the tunnel. I did not go so far.

  Any help is appreciated.

  Best regards

  Stefan

  You can define the interface that the ASA will use to send the newspapers "syslog_ip host record.

  Make sure you also do "access management".

  Then the SAA should source the syslogs from inside the interface, which is probably encrypted with the crypto ACL.

  I hope it helps.

  PK

• How to apply internet traffic in VPN tunnel users

  Hello

  Perhaps it is a simple matter to most of you, but it confuses me right now.

  Here's my situation:

  home - internet - ASA 5510 users - CORP LAN

  We have remote Ipsec VPN and anyconnect VPN, I think that the solution must work on two of them.

  My question is: "how to apply internet traffic user home to the VPN tunnel?

  We have "split tunnel" to only"'interesting traffic' VPN tunnel access LAN CORP.

  but now I need apply all traffic (internet + CORP LAN) user through VPN tunnel passes.

  so far, I did what I know:

  1. remove the "split tunnle" group policy

  2. the address in "remote user VPN address pool" are perhaps NAT/PAT travers ASA5510

  but I don't get why it doesn't work.

  all suggestions are appreciate!

  Thank you!

  A few things to configure:

  (1) Split tunnel policy to be passed under split in tunnelall tunnel

  (2) configure NAT on the external interface to PAT to the same global address.

  (3) configure "allowed same-security-traffic intra-interface" so that the tunnel VPN for Internet traffic can make a u-turn.

  Please share the current configuration if the foregoing still does not solve the problem. Thank you.

• Impossible to pass traffic through the VPN tunnel

  I have an ASA 5505 9.1 running.   I have the VPN tunnel connection, but I am not able to pass traffic. through the tunnel. Ping through the internet works fine.

  Here is my config

  LN-BLF-ASA5505 > en
  Password: *.
  ASA5505-BLF-LN # sho run
  : Saved
  :
  : Serial number: JMX1216Z0SM
  : Material: ASA5505, 256 MB RAM, 500 MHz Geode Processor
  :
  ASA 5,0000 Version 21
  !
  LN-BLF-ASA5505 hostname
  domain lopeznegrete.com
  activate the password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.116.254 255.255.255.0
  OSPF cost 10
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 50.201.218.69 255.255.255.224
  OSPF cost 10
  !
  boot system Disk0: / asa915-21 - k8.bin
  passive FTP mode
  DNS server-group DefaultDNS
  domain lopeznegrete.com
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  the LNC_Local_TX_Nets object-group network
  Description of internal networks Negrete Lopez (Texas)
  object-network 192.168.1.0 255.255.255.0
  object-network 192.168.2.0 255.255.255.0
  object-network 192.168.3.0 255.255.255.0
  object-network 192.168.4.0 255.255.255.0
  object-network 192.168.5.0 255.255.255.0
  object-network 192.168.51.0 255.255.255.0
  object-network 192.168.55.0 255.255.255.0
  object-network 192.168.52.0 255.255.255.0
  object-network 192.168.20.0 255.255.255.0
  object-network 192.168.56.0 255.255.255.0
  object-network 192.168.59.0 255.255.255.0
  object-network 10.111.14.0 255.255.255.0
  object-network 10.111.19.0 255.255.255.0
  the LNC_Blueleaf_Nets object-group network
  object-network 192.168.116.0 255.255.255.0
  access outside the permitted scope icmp any4 any4 list
  extended outdoor access allowed icmp a whole list
  outside_1_cryptomap list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
  inside_nat0_outbound list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
  LNC_BLF_HOU_VPN list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 741.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  !
  network obj_any object
  NAT dynamic interface (indoor, outdoor)
  outside access-group in external interface
  !
  router ospf 1
  255.255.255.255 network 192.168.116.254 area 0
  Journal-adj-changes
  default-information originate always
  !
  Route outside 0.0.0.0 0.0.0.0 50.201.218.94 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  AAA authentication enable LOCAL console
  Enable http server
  http 192.168.2.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 50.201.218.93
  card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
  outside_map interface card crypto outside
  Crypto ca trustpoint _SmartCallHome_ServerCA
  no use of validation
  Configure CRL
  trustpool crypto ca policy
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
  308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
  010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
  30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
  13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
  0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
  20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
  65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
  65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
  30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
  30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
  496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
  74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
  68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
  302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
  63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
  010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
  a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
  9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
  7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
  15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
  1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
  18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
  4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
  81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
  082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
  7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
  ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
  45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
  2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
  1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
  03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
  69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
  02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
  6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
  c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
  69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
  1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
  445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
  1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
  2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
  4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
  b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
  99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
  481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
  b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
  5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
  6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
  6c2527b9 deb78458 c61f381e a4c4cb66
  quit smoking
  crypto isakmp identity address
  Crypto isakmp nat-traversal 1500
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  aes-256 encryption
  sha hash
  Group 5
  life 86400
  IKEv1 crypto policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH 0.0.0.0 0.0.0.0 inside
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  SSH version 2
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  management-access inside

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  attributes of Group Policy DfltGrpPolicy
  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
  username
  username
  tunnel-group 50.201.218.93 type ipsec-l2l
  IPSec-attributes tunnel-group 50.201.218.93
  IKEv1 pre-shared-key *.
  NOCHECK Peer-id-validate
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  call-home service
  anonymous reporting remote call
  call-home
  contact-email-addr [email protected] / * /
  Profile of CiscoTAC-1
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:e519f212867755f697101394f40d9ed7
  : end
  LN-BLF-ASA5505 #.

  Assuming that you have an active IPSEC security association (i.e. "show crypto ipsec his" shows the tunnel is up), please perform a packet trace to see why it's a failure:

   packet-tracer input inside tcp 192.168.116.1 1025 192.168.1.1 80 detail

  (simulating a hypothetical customer of blue LNC tries to navigate to a hypothetical LNC TX Local site server)

• I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this 'exception unknown software exception (0xc00000fd).

  Svchost.exe - application error

  I use windows xp professional edition. I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this
  "The exception unknown software exception (0xc00000fd) occurred in the application at location 0x5b8787ad.
  Click OK to terminate the program
  Click on CANCEL to debug the program.

  If I clicked on ok and cancel, it disconnects Internet. the message again after the computer restarts and the connection with the internet. and also the internet Explorer does not open I tried several times but it doesn't work. What can I do to slove this problem. Please help me.

  Hello

  ·          When the issue started?

  Step 1: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

  Step 2: Check if the problem persists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

• When I try to connect to the internet via the usb cricket modem thing, I get an error entry ras error creat/change also error 1068

  Original title: new laptop user

  I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  "Error 1058" error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

  Also refer to this article and check if it helps:

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Note: Also valid for Windows Vista

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• Is it possible to connect a printer HP 4622 to internet via the wire that I do not have a router?

  Is it possible to connect a printer HP 4622 to internet via the wire that I do not have a router?

  Hello

  This support of the wired network printer doesnot.

• can the Internet, have the vpn connection

  can the Internet, have the vpn connection using nat

  can the Internet, have the vpn connection using nat

  Yes, it can.

• Connectivity on the VPN tunnel problem.

  Hello

  I have a site to tunnel between the PIX506 and Cisco VPN 3000 Concentrator. I'll be spending it again ASA5510, so the tunnel will be established between the ASA and PIX. After inistial tests, I found only one box of remote network (time clock lol) is down by connectivity while tunnel between Pix and ASA (works fine with the hub). All traffic is allowed through the VPN tunnel built on SAA is? I understand it should be as long as the tunnel is running, correct? (Note: the remote clock uses ports TCP 8888 and 8889 to communicate with the server)

  Thank you

  If there is no filter, again all traffic should be allowed.

  You need not choose L2TP connection is pure IPsec.

  If you wish, you can post your configurations to check them out (you can remove sensitive information)

  Federico.

• After the VPN Tunnel access problem is in place.

  Could someone please take a look at this config and tell me why, once I have the VPN tunnel to the top, I can't access all hosts on the 192.168.41.0 network? (The x are inserted for privacy). Thank you.

  Try...

  ISAKMP nat-traversal

• Interpret what is allowed on the VPN tunnel

  Hello

  I work with Cisco PIX equipment for the first time and I'm trying to understand what is allowed on one of the VPN tunnels which are established on the PIX.

  I interpret this PIX did by reading the running configuration. I was able to understand most of it (with the help of the cisco site), so I'm starting to get comfortable with it. I'm looking for more help in the interpretation of what is allowed by a good VPN tunnel. Here are some details:

  map Cyril 2 ipsec-isakmp crypto

  Cyril 2 crypto card matches the acl-vpntalk address

  access list acl-vpntalk allowed ip object-group my_inside_network 172.17.144.0 255.255.255.0

  So, if I interpret it correctly, then the traffic matching ACL acl-vpntalk will go on the VPN tunnel.

  As far as the lists others access dedicated, my inner interface I have:

  Access-group acl-Interior interface inside

  With ACL-Interior:

  access list acl-Interior ip allow a whole

  So nothing complicated there.

  Now, just because of all this I conclude I encouraged all remote network traffic in my site. If all traffic 172.17.144.0/24 is allowed to join my network.

  However, I don't know if this conclusion is correct.

  This ACL is also applied:

  Access-group acl-outside in external interface

  And it looks like:

  deny access list acl-outside ip a

  I'm not sure if this ACL applies to vehicles coming from the IPSEC peer. It's for sure inbound on the external interface, but if it is valid for the IPSEC traffic I don't know.

  If it is valid, then am I had reason to conclude that only connections initiated from my inside network to the remote control can come back?

  Thanks in advance for your ideas.

  With sincere friendships.

  Kevin

  Hey Kevin,

  Here are my comments, hope you find them useful:

  1. the ACL called "acl-vpntalk" sets traffic who will visit the IPSec tunnel, so you got that right. All traffic from the group called "my_inside_network" will 172.17.144.0/24 will pass through the tunnel, and there should be a similar to the other VPN end opposite ACL.

  2. the 'acl-inside' applied to the inside interface allows any ip traffic coming out of the isnide to any destination.

  3. the 'acl-outside' rejects all traffic from entering your home network, but the IPSec traffic is free and will cross because you will find a "sysopt connection permit-ipsec' configured on your PIX command that tells the operating system to allow all traffic destined for VPN tunnels without explicitly enabling it through the inbound ACL. If you have stopped the "sysopt" should stop your traffic and you will have more control on your tunnel traffic.

  Personally, I usually disable the "sysopt" and control the VPN traffic in my incoming ACL.

  Just a quick note, if you look more deeply into the ACL on the PIX functionality, you will find that no traffic moves inside, if she is not allowed on the external interface. For example, you can allow traffic between "inside" and "dmz" interfaces by adding an entry 'allow' on one of the ACLS applied to one of these interfaces. But when you want to allow traffic from the external interface (security level 0), you will need to allow in the inbound ACL applied on the external interface.

  I could have written something vague, but I hope you get my point.

  Thank you.

  Salem.

• ASA 5505 VPN works great but can't access internet via the tunnel to customers

  We have an ASA 5505 ASA 8.2.1 running and using IPSec for Remote access clients in the main office.  Remote access is a lot of work, with full access to network resources in the main office and the only thing I can't get to work is access to internet through the tunnel.  I don't want to use split tunneling.  I use ASDM 6.2.1 for configuration.  Any help is appreciated.  I'm probably missing something simple and it looked so much, I'm probably looking at right beyond the error.  Thanks in advance for your time and help!    Jim

  Add a statement of nat for your segment of customer on the external interface

  NAT (outside) - access list

  then allow traffic routing back on the same interface, it is entered in the

  permit same-security-traffic intra-interface

  *

  *

  * more than information can be found here:

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807...

  On Wednesday, 27 January 2010, at 23:12, jimcanova