Interruption of the wireless connection
I accidentally disabled my wireless internet connection. The message windows cannot configure this wireless connection and a list of connections is no longer displayed. Any suggestions?
Hi Alex1028
Tags: Windows
Similar Questions
-
interruption of the wireless connection with the computer laptop and printer
We have a printer HP6500 we lost the connection Wireless to our Dell laptop. Whenever we need to print to bring the laptop to the floor and connect it with a cable to print. I tried to close the printer downstairs next to the laptop and the router but it would not print wireless. Any other suggestions? Thank you. CK
Hello
Check with HP, their drivers support and online documentation and ask in their forums on any
known issues. As OEM HP is responsible for the good operation of the printer and provided them with
drivers.More than one 6500 printer
http://WWW8.HP.com/us/en/support-drivers.htmlSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/Try resetting the printer with the latest drivers.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Interruption of the WiFi connection. Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond. Tried to reset Airport Express, but remained light amber or orange flashing. I unplugged it and waited and plugged back into the light turned green. Rebooted computer (Mac Pro). Parameters of said the same thing. Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless. I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation. My original WiFi name disappeared. How I am on the internet?
What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?
-
Repairs on the wireless connection
I have a Dell dimension and we have wireless broadband via a router. In this computer, the connection with the browser keeps turn off even if the wireless connection says "excellent". We must repair the connection to the internet to relive. We use Windows XP Pro SP3. This problem will not occur with any other laptop or computer in the House.
Hi Tinker7,
Method 1
This problem may occur if theenable IEEE 802. 1 X authentication for this network check box is selected. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.
Computer disconnects from a wireless network after random time intervals in Windows XP
http://support.Microsoft.com/kb/910387
Method 2
If the previous step fails then I suggest that you update the wireless desktop network card driver from the card manufacturer's website.
Information about the hardware devices for Windows XP drivers
http://support.Microsoft.com/kb/319908
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Satellite L50-B-2CP - cannot set the wireless connection
Hello
I have an out of the box of Toshiba Satellite L50-B-2CP portable wihtout os because I had a free w7 license and the wireless connection is turned off. I downloaded the broadcom drivers both atheros from the toshiba site, but also the intel wireless lan driver but nothing works when I go into Control Panel, wireless network card is not visible, I don't see Bluetooth.
Any ideas?
The Device Manager has no intel listed lan card wi...
Are you sure?!
Have you checked it properly?
LAN and WiFi should appear in the Device Manager in the network adapters box.
Please check this! -
Re: Satellite L670 loses the wireless connection
Hello
I have a Satellite L670 - 1 H 1, a new laptop that runs Windows 7, with all the drivers and software uptodate, including the wireless card.
I have a BT Home Hub 3 with an Edimax EW 7416APN v2 300 m range extender to help boost the signal in the kitchen area.
The laptop works fine when I stay in the room where the reception centre. If I move in the kitchen the laptop will usually lose the wireless connection after a few minutes and I cannot get it back unless I turn the LAPTOP works and return to the Home Hub.
I see no obvious reason to this problem. Two other laptop computers used in the home, more a smartphone stay connected with full signal in every corner of the House, at any time.
I have to use the range extender, but is it possible that the laptop Toshiba just don't hear well with it?
Any advice would be welcome.
Thank you
CantonHello Canton
As you know quality of connection WLAN depends on different factors is not easy to say why you have this problem, WLAN. I use Toshiba laptops for a long time now and I didn't notice in the past some serious question of WLAN.
For example I'm 4 router with standard g and have very good signal even in the cellar too or out in the back yard.If possible, try to test the WLAN connection elsewhere. Maybe your friends have WLAN routers so you can test it.
You have a new router or old?
What WLAN standard do you use (b/g/n)? -
Satellite L505-13F - impossible to activate the wireless connection
Hello, I have connectivity problems with my Satellite L505-13F.
I can't turn on the wireless connection. I press Fn + F8 and nothing happens. The indicator at the bottom of the laptom turns on.
I though this would be a problem with the drivers. I downloaded realtek wlan driver here [http://aps2.toshiba-tro.de/wlan/?page=downloads], but it has not installed correctly. Then I used the toshiba software installer, but yet again, nothing has changed. I have Windows 7 Home premium 64-bit.
Device management, I have seen that I installed a wifi driver. (Realtek RTL8191SE Wirelless Lan...) So, what the problem is?
Any suggestions?
Hey,.
Something happens if you press other keys FN or FN + F8 doesn't work only? Normally with this key combination you can enable/disable wireless network card.
In addition, it would be interesting to know what happens if you are looking for WLAN networks. You see your WLAN router?
If all the keys FN n t work, reinstall the package of added value and utility to Support Flash Cards. Otherwise, it could be another problem and you should reinstall the driver again and make sure the firewall isn't blocking the connection.
See you soon
-
Satellite A660-13D - I can't go 65 Mbps with the wireless connection.
+ Sorry for my English is not my mother tongue. +
Hello
I expose my problem:
I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.
Configuration of the laptop:
* Windows 7 Ultimate 64-bit (with all updates installed).
* All the updated drivers correctly.
* With the latest version of the BIOS.Router:
* Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).
The router configuration:
* WPA2-PSK AES.
* 802.11n
* Maximum output power.
* Channel: 11 (not automatic, that this channel is relatively free).
* Width of channel: 40 Mhz.
* Maximum tx frequency: 300 Mbps.Other information:
The wireless card drivers are correctly then updated (ver. 5.60.48.35).
* The router has updated the firmware.
* I tried all the settings of the wireless card.
* Bluetooth off (without interference).
* {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}Thanks in advance,
Greetings.Post edited by: Xibalba
Have you tested using different channels?
Have you tested speed WIFI connected to another router? -
Can I use my printer manually instead of using the wireless connection?
Can I use my printer manually instead of using the wireless connection?
cbg_37 wrote:
It is an OfficeJet Pro 8610.
Hello
It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:
Kind regards.
-
all-in-one 7510 loses the wireless connection
We just bought a HP Photosmart 7510. She created fine with a wireless connection to our office for Vista 64-bit. After awhile, he loses the wireless connection. If I close the printer then turn on again, it resets the connection and works very well. I read that it can lose connection if it goes into sleep mode, and it seems that is what is happening. My question is, is there a way to keep the impression of loss of connection or enter the mode 'sleep'? Or do we have to put the printer only whenever we wanted to print, copy or scan? If so, the printer is adjustable to disable instead of switch mode 'sleep'?
Already set to 'off '. I found this thread http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/7510-photosmart-printer-energy-mode/m-p/1230681/highlight/true#M33814 I tried this and so far it works and has not lost its connection.
-
connection Wi - Fi
My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?Hello
1 did you change your computer, after which the issue started?
2. during how long have you had the problem?
3. what web browser do you use?I recommend to update your network card drivers and check if that helps.
http://support.Microsoft.com/kb/283658Let us know the status of the issue and also please answer these questions.
-
hp7410 does not keep the wireless connection
hp7410 all-in-one does not keep the wireless connection. It requires to install a new driwer. so far, I have at least 16 versions of the driver. neither maintains the status of line long enough fo more than a few hours.
Please provide the following information if anyone can help including:
The printer model - done
Detailed problem description-
Operating system on the computer (including the revision of the service pack)-
Method - USB, LAN, Wireless cable connection? -
Brand and model of router and modem? -
Error messages - on the screen of the printer or computer, no matter what flashing light patterns.
If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -
-
Windpws Mail & Wi - Fi
I just installed a TalkTalk wireless router which seems to have installed correctly. However when I try to send and receive e-mail using Windows Mail, she wants to use a made up connection. How can I use the wireless connection? Thank you very much, Dianthus MJ.
Go to tools | Accounts | Mail | Properties | Connection and check or change the connection properties. You will need to remove the account and then add it again, but try first and also check tools | Options | Connections.
Steve
-
Inspiron N5110 loses the wireless connection
My Inspiron N5110 loses the wireless connection frequently. We have many other devices in the House - laptops, iPhones, etc. - who continue to operate perfectly through the router even when I lose my connection. The store usually brings me to reset the router, even if, as I have indicated, the router works properly. Any thoughts? Thank you!
Richard.Kelly,
The Intel Centrino Wireless - N 1030 adapter works ONLY on 2.4 GHz
How to connect to your wireless router I use these settings to the recommended wireless router I use channel 11. I have a new SSID to connect easier.
You can also try these settings...
Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.
Try these tweaks...
Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.
Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.
Rick
-
E4200v2 removes the wireless connection
Hi all
I recently installed the e4200 to go with my new internet (BT Infinity 80 d 20u).
I have not changed no matter what it is, apart from the SSID name so I can choose which device has access of the band 2.4 or 5 ghz.
I encountered a problem with the wireless and it abandons the connection randomly. I must then activate and disable the adapter on my laptop wireless to connect again.
What I've tried so far
TV - a number fixed rather than automatic
Network - N-only mode and back again on Auto
Width of the channel - 20 mhz only
I have read reports of allot of people having this issue however the majority of the questions were for more than one year (2011). Am I to assume that this problem has been resolved with a firmware update somewhere that I missed? My current firmware is
2.1.38.138880 is the most up-to-date?
Any help will be most appreciated.
Looks like you are using the Cisco Connect cloud firmware... Yes, this is the last!
you experience this problem on a single PC? If so, isolate by connecting another device to the network wireless and check if it interrupts the connection as well.
your current settings can be adjusted to optimize wireless connectivity. use MIXED mode network and 20 MHz for the width of the channel. to check which channel has the least interference, see inSSIDer. This tool will be mapped to the current network environment in your region, showing you which channel is used mostly to help put you your network to a less crowded channel.
Maybe you are looking for
-
Wireless seems to drop in and out sporadically
Wireless seems to drop in and out sporadically. Time capsule is wired on the desktop; However, all other devices in the House keep dropping the Wi - Fi and are always asking for network password even if it is already registered in each device. Thre
-
Duplication of Firefox icons on the Windows 7 taskbar
Citing the Forum Windows 7: http://www.sevenforums.com/general-discussion/256708-duplicating-icons-taskbar.html Hello I searched high and low for a way to do this, but I can't seem to find anything. First of all, I don't want to install or download a
-
Satellite A100 - how to install "Windows XP MCE" on a new HARD drive?
I have a laptop Satellite A100-495. the cd/dvd does not work and I have a new hard drive. Now, I want to install the original os (windows xp professional, mce).I'm trying to put the files of my original restore on a USB cd but never works and I did n
-
I saw the posts here on the deletion of an account of the AIM of the pre, but none of them does not work for me. I think that I logged accidentally on an old account of GOAL because my buddies are added. I can't do the remove account button be with
-
I deleted the files from my office, they are still there and I can't delete them again cos keep telling me to check the location and try again