Invasion of privacy House computer worker

I work from home and accidentally captured my employer followed my personal computer which is totally separate from my work with a kind of stealth software computer.  Obviously, they deny that and I can not see it again.  I know it's illegal.   I don't know what to do - how to regain my privacy.   I leave the company as soon as possible because I can't work for anyone else sick.

I just need to know how to find my privacy or what to do.

Do a clean install of the Vista operating system to wipe the hard:

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I have can´t scan in Officejet 6700. Printing from the computer works perfectly.

    I have a new 6700 Officejet connected with the USB cable to the computer. (Windows XP) Printing from the computer works perfectly. Sannen works onl + y from time to time. When the attempt at analysis, he says that there is no connection between the scanner and the computer. I changed the USB cable to exclude damage to the cables. I tried all the help files for HP without result. Who please can tell me what is happening

    I think I know where banhien is trying to guide you. I'll explain his instructions in more detail below.

    1. make sure you are on the desktop view.
    2. double-click on the icon on your desktop that resembles your printer.
    3. under the section titled scan, you should see "Manage Scan to Computer".
    4. click on "Manage the Scan to Computer" and a window that's going to Enable.
    5. click on activate to activate computer scanning.

    If the icon is not on the desktop, or does not work, you may uninstall and reinstall the printer. If you need to do this, be sure to use the latest version of the software following the link. Hope this helps to clear things up a bit.

    Driver and HP Officejet Full Feature software

  • I have been scammed by Mindbrix last week. Is it possible that they could have downloaded Malware in my Macbook Pro? The computer works fine now, but should I run a kind of diagnosis or that someone check it out?

    I have been scammed by Mindbrix last week, and this community let me know... Thank you! Is it possible that they could have installed some sort of malicious software on my Macbook Pro X or am I protected? My computer works normally at this stage.

    Is it possible that they could have installed some sort of malicious software on my Macbook Pro X or am I protected?

    If you don't give them access to your computer or download something on their request, you should be fine. If you allow them access or downloaded something, you must erase and reformat your hard drive, then restore your computer from a backup taken before when you allowed them access. Change your passwords and other critical information also. Not sure what software have been installed. If necessary, contact your bank to make opposition and cancel your credit card.

  • Windows update fails error Code 800F020B Hauppauge Computer Works WinTV HVR - 950 a ATSC/QAM valve

    Device Capture of Hauppauge Compuer Works, Inc. - Streaming Media and broadcast devices - WinTV HVR - 950q ATSC/QAM

    Installation date: 01/08/2009-10:55 (on build 7100 Windows 7 RTM)

    You may have to restart your computer for this update is taken into account.  (not restarted, update optional removed, the equipment does not work)

    Installation status: failed

    Error details: Code 800F020B

    Undate type: Optional

    Release of updated software Hauppauge Computer Works, Inc. Streaming Media and Drvices released in May 2009

    More information:
    http://winqual.Microsoft.com/support/?DriverID=20283357 (content is set to null, only placeholder)

    Help and Support:
    http://support.Microsoft.com/Select/?Target=Hub (how I arrived here to connect the update failed)

    Made repeated attempts with HVR-950 a device plugged upward, not blocked, etc.  Still didn't update installation.  Finally did me not able to not try again, no uninstall process defined in the current detail informaiton failture.

    Hello GrayWin7,

    Thank you for choosing Microsoft answers forums for Windows Vista. I hope you do well.

    You may need to update the drivers here. Please check the link for more details below:

    http://windowshelp.Microsoft.com/Windows/en-us/help/b293f652-20ed-4D34-af07-f2cba6fe68f51033.mspx

    Alternatively, you can try to perform a clean boot:

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Follow the link for more information below:

    http://support.Microsoft.com/kb/929135

    Hope this information is useful.

    Thank you.

  • How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002

    How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002.   I found the site for download fixit, but I have no desktop feature other than the startup repair options.  I thot I could download fixit from my flash drive solution, but I can't find a command prompt to access.  It is the only page from command prompt I can find... I'm in x:\windows\system32\cmd.exe trying to find the good order for my location flashdrive G:

    I used to go G and get G but it says only that go and get are not internal or external commands and not an executable program or batch file

    HELLLLLLLPPPPPPP!   Thank you!

    x:\ I do not think it is a 'valid' for what you intend. I used a 2nd computer and the original disk, I don't remember tho if I used windows file transfer or just copy, but I had the disc copied to the flash drive and reinstalled windows 7. I have still no working dvd rom (x 2) they open and close (sometimes), but the drivers need to be mounted to something incomplete. repair is absent as well. some other problems too but its been executed in this way for months (apx5). here and there, I get an email from answers, that's how I arived here really (enroute) hope this helps (a bit)

  • Could not get computer working properly due to malware. Went to safe mode and cannot fix. Can we please hep

    Annot get computer works correct due to malware. Went to safe mode and cannot fix. Can we please hep

    Hello

    1. what exactly is the problem?
    2. Why do you think malware are causing this problem?
    3. What have you tried in safe mode?

    Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
    How to ask a question
    http://support.Microsoft.com/kb/555375

  • I have a problem with the computer work is not correctly after you install the KB2753842 update.

    This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

    Original title: update security for windows (KB2753842)

    Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

    Also, I learned a few new things about the updates and restorations, so...

    Bravo for Nirmal S!

    Kind regards...

  • The sound on my computer works. What should I do?

    The sound on my computer works. What should I do?

    Do you mean work 'IS' or 'IS NOT'?

    If this does not work, check in the device manager that your sound card is listed and functional and active.

    If it apparently all there and all ok, run the audio Troubleshooter to see if it helps - http://windows.microsoft.com/en-GB/windows7/Open-the-Playing-Audio-troubleshooter

    If there is a definitive failure, or that the above is not enough, then please post back with more detailed information, exact error messages or that he fault codes etc, type of pc (desktop, laptop) etc.

  • The computer I use at work is a PC. I know that you are allowed to install programs on two computers, a computer work and a laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

    I don't know if I'm in the right forum for this question, but I don't know where else to ask about installation on platforms. Thus, the computer I use at work is a PC. I know that you are allowed to install programs on two computers, a computer work and a laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

    What exactly Adobe product?

    Clouds: Yes.

    Creative Suite: No.

  • Pots of support Invasion of Privacy - claims to be approved by Microsoft - threats to computer security

    This afternoon, I received a phone call suspect of someone (very strong Indian accent) claiming that he was of pots in charge who had allegedly approved support for Windows Microsoft firmware. He knew the details of our name and contact information. He was trying to tell me that we downloaded unintentionally viruses on your computer and tell us how to solve this problem. The alarm sounded at the beginning, but my main concern,'s done it how this organization to take our details. I am a very careful person when it comes to my personal life. Out of curiosity (as I was convinced that appellant was based abroad), I asked where he was calling from... He claimed to Adelaide. When asked what part of Sdelaide, he said, the southern. I asked an address and all he could give me was St Johns. He said the phone wasn't (08) 70041212. If it were Adeéaid the number would have started with 8 not a 7. I have no intention of ever letting anyone to have remote access to any computer, and I noticed since at least that someone else had known the call of the scam. So, is this able to report, and how do I protect our coordinates so that these stupid people (saying that he well :-)) not wasting my time again.

    Hi RhonaBne,

    Please take a look at the sticky thread for some useful information:

    I received a phone call / email from someone who says that my computer has been infected by a virus

  • Will be Air 2 iPad as main computer work? How?

    Hello

    my computing needs are very basic - e-mail, Internet, watch YouTube, simple word documents and spreadsheets base (household budget). but I have to be able scan documents and download these outdoors (at the accountant's Office, departments, etc., I have a Brother laser wireless printer that scans.)

    My question is, should I do my computing needs with just an Air 2 iPad and my printer existing without having to buy another PC or laptop?

    any advice or thoughts offered would be much appreciated. I am technically very disputed

    Thanks in advance for all advice offered.

    Yes, you can use iPad 2 look like the replacement of your PC.

    For example. App to scan:

    https://iTunes.Apple.com/au/app/scanner-Pro-7-document-receipt/id333710667?Mt=8

    For printing, you may need an AirPrint-compatible printer: they are not so expensive.

    FWIW, I use a Canon PIXMA MG7160 and it works fine. Of course, he isn't the only one.

    Read here:

    On AirPrint - Apple Support

    AirPrint allows to print from your iPhone, iPad or iPod touch - Apple Support

  • Installed El Capitan, Mac Mail not loading and computer works slower

    It is now a week now since the installation and Mac Mail is still not loading new emails automatically. When I exit and restart the mail, the titles of all new e-mails comes in but not the content. In order to get the content I did some random actions that I remember even they did work once or twice?  The program also randomly stops.

    I have only one Imap account, have cleaned all the unwanted files and trash and as suggested have removed all the log files and rebuilt, and reindexed mail. However, I can't rebuild my Inbox as it won't let me?   Overall, my computer also seems to run slower for all tasks. I have an early 2011, the Macbook Pro 17 "with 16 GB of ram and a fast SSD drive. Before this upgrade, I've rarely seen a spinning ball, and this computer is running fast as lightning!

    Very frustrated with this upgrade so far :-(  Hoping it might be a simple problem or update soon...

    Thank you

    John

    Try these in order to test your system after each see if it is back to normal:

    1. a. reset the PRAM and NVRAM on your Mac.

    b. Macs with Intel processors: reset of the controller (SMC) system management

    2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

    HD recovery start: restart the computer and after the buzzer, press on and press and hold the

    COMMAND and R keys until it appears the Utilities menu screen.

    3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

        When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

        back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

        ends, then quit disk utility and back to the main menu.

    4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

    Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.


  • Why not uninstall it on my computer work for the cards galaxy toolbar?

    I tried for about four hours to uninstall the toolbar from Galaxy of cards because my computer is mess with it and it does not work, uninstall on my computer ceases to appear with it please wait it is complete the uninstall, but there is no progress.

    Hello

    1. what operating system is installed on the computer?

    2. is the specific cards Galaxy toolbar issue?

    Run that fix the following:

    Note: the following fit-it asks you what program needs to be uninstalled, go to the Galaxy of maps.

    Solve problems with programs that cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  • Connect Player smart cart in web searches for information and Dell computer works and automatically. Connect Player even in Vaio and nothing. WHY?

    Reference Dell Inspirion w / Windpows 7
    Sony Vaio w / WndowsXP

    Hello

    1. is the issue specific to Windows XP card reader?

    2 have you made any changes to the computer before the show?

    Follow the mentioned methods:

    Method 1:

     

    Step 1:

    Run the fixit available in the link below and check if that makes a difference

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

     

     

    Step 2:

    Check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

    i. click Start, click runand type devmgmt.msc and press to enter.

    II. research the name of the device

    If the device is not detected in Device Manager, and check if it is the hidden device.

    i. click Show hidden devices under view

    II. develop all winks in Device Manager

    III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

    If the problem persists even follow method 2.

    Method 2: Run the fix it.

     

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

     

    http://support.Microsoft.com/kb/925196

     

    I hope that the above information is useful!

  • My computer works fine.

    My task manager does not

    No matter what Antivirus will not open and some anitvirus not installed when I open the setup and then install automaticlly close

    any software fix that windows does not.
    And registry also does not work.

    Help me!

    Hi Tenis,
    Your computer is probably infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
    It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
    Brian

Maybe you are looking for