Invited guess receives not Gmail Cal event notification.

Hi all, I tried to search for it and don't quite have a simple answer to my question. I have a gmail account and use it to create all my calendar events. When I add my wife as a «who» in the case of field of creation, his correct gmail email returns, but it does not receive an invitation to the calendar event. But when I send the same event to our yahoo email, the email invitation shows immediately. What is happening with this? Are there settings or something that changes necessary? Thank you

Discovered only today, that when I create the calendar event and invite my wife when she was a gmail account, it automatically places the event in its calendar. (Without him making any type of notice).

Tags: Motorola Phones

Similar Questions

  • System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

    I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

    Hi 1234Tony,

    First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

    To repair and put back the Windows Vista

    1. Click the Start button.
    2. Type Cmd in start it the search text box.
    3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
    4. Type netsh winsock reset in the command line shell, and then press the Enter key.
    5. Restart the computer

      If please reply and let us know if your problem is resolved or if you need further assistance

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

  • I am unable to connect to the internet. I get this error message "Windows does not have to connect to the System Event Notification Service service.»

    my computer is showing this message and custom allow Internet: Windows could not connect to the System Event Notification Service service.  This problem prevents limited users to logon to the system.  As an administrator (which I don't have) you can view the system event log to see why the service did not respond, can anyone help? Please

    original title: can't get on the internet

    Hello

    Try the steps in the following article:

    "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP and Windows Vista":

    http://support.Microsoft.com/kb/811259

  • Windows could not connect to the System Event Notification service.

    I have a DELL Latitude E6500 32-bit computer Vista Ultimate SP2 with a wireless network in the home network. I got the above error message tonight and I don't know what to do about this. He said that this prevenets limited users to connect to the system. I don't know anything about networks. The Geeksquad installed for me and I'm lost.

    Help, please.

    See if this will help you to start the recent Notification System...

    Start button > in the search box, type services > press the Enter key > uac prompt > scroll down to find the event notification system... > until it clicks >
    topic status, it should be... Has begun
    under Startup Type, it should be... Automatic
    If it is not defined, right-click the event notification system > properties >
    in the start of type position, click on the pointer, and then select Auto
    as a Service status, click Start
    Click OK when finished

    Make the same adjustment of...
    Remote procedure... that represents the remote procedure call (RPC)
    DCOM Server Pro... which represents a DCOM Server process Launcher

  • Error message "could not start the system event notification service.

    Original title: windows s event notification service does not start whwn that my PC is started

    Hello

    I'm running on the windows operating system 7, suddenly today I see when my computer starts, he says:

    1. windows event notification service does not start

    2. start menu back to Classic view, all of the aero themes has turned.

    3. right click on desktop seems to not work

    I have not had any installed software recently, don't know why it happened you can help me with this? I've restored a few days again the same question

    can someone help me?

    Sujith Hello,

    Thanks for posting your question on the Forums of community of Microsoft.

    According to the description, you got the error message "windows event notification service cannot start.

    I suggest to follow the suggestions of Bikesh T replied on 1 June 2011 from the link below and check.

    Reference:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/failed-to-start-system-event-notification-service/eec9b5cd-fda9-43eb-B6D0-d2ba92e79413

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

    Original title:

    Office blocked in the classic theme.

    This morning when I started my computer, I noticed that it displays the following error message:

    "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

    I went through the event log and found three errors:

    Name of the error: Service Control Manager
    Event ID: 7022

    "The Windows Audio service hung on starting."

    Name of the error: Application Popup

    Event ID: 875

    "Pilot atksgt.sys has been blocked by a load."

    Name of the error: Service Control Manager

    Event ID: 7000

    "Atksgt service failed to start due to the following error:
    This driver has been blocked by a load.

    There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

    Any help is appreciated.

    I would like to use system restore to set up Windows in a few days.

  • "Could not start the system event notification service" windows 7

    My computer started to get this message "Failed to start system event notification service" submarine ball, I have windows 7.

    I tried netsh winsock reset, but the problem persists.

    the sfc/scannow shows no errors.

    I am not able to connect to the internet. Kindly help

    Hello

    I suggest you follow the below methods that can help you resolve your isssue:

    Method 1:

    Restart the system event notification service.

    • Open the Start Menu.
    • In the online search, type services.msc and press enter.
    • If you are prompted, click on continue in the UAC prompt or provide the password for administrator approval.
    • Right click on the service you want to restart.

    Method 2:

    I recommend you perform the clean boot.
     
    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • When you try to log on, get error - "the system event notification service has no logon. the remote procedure call failed and did not execute. »

    My netbook will not open a session because it can not find a certain file. She won't tell me the file. and when I try to go to safe mode it freezes... is there anyway I can just read another account another point? the message I get is "the system event notification service does not log. the remote procedure call failed and did not execute. "tips anyone? I care is no longer the files it contains. If I could wipe it off somehow to factory settings then would be too cool. his windows 7 starter edition


    Original title: hp netbook to log issue

    You have two options:

    • Perform a factory restore. Check the homepage of the manufacturer for instructions.
    • Start the computer with your Windows XP installation CD, and then follow the prompts. You will have to find the different drivers to match your hardware, for example a driver for SATA hard drive.
  • Windows 7 not connected the system event notification.

    Hello

    I have Windows 7 operating system on my laptop wireless. (it's 32 bit), lately, when I start the computer, it is very very slow and then I get this message that says: Windows 7 has no connection to the system event notification.

    I did system restore, but it did not work. I ran Fixit program but nothing happened. So what is the cause and how to fix it?

    I read a few solutions on the internet, but when I tried to follow them, I can't find certain things on my computer, that are mentioned in the instructions, so I can not complete the step by step instructions.

    Please respond to your first it will be appreciated.

    Thank you.

    Night1

    Hello

    Thanks for posting your query in Microsoft Community Forum.

    I understand that you get the message 'Windows 7 did not link with the event notification system. Let me ask you a few questions to better understand.

    1. When exactly do you get this error?
    2. This error occurs on a specific user account?
    3. You did a significant hardware or software change before this problem?
    4. What security software do you use?

    This conflict may have been caused by some programs launched during the startup process of Windows 7 with the services.

    I suggest you to try the following suggestions and check.

    Method 1: The value Service of event system Automatic Notification.

    To so proceed as follows:

    one), click Start or press the Windows key + R

    (b) type Services.msc in the search box and press enter.

    (c) right click on System Event Notification Service.

    (d) click on Properties , change the startup type to Automatic.

    If the computer stops during execution of the above steps, you can try to put the computer in clean boot mode and check.

    Method 2: Check safe mode

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

    If the computer starts quickly in safe mode, check in a clean boot

    Method 3: Perform the clean boot

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: See 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

    Method 4: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

    http://support.Microsoft.com/kb/977419

    You can also check the suggestions provided by Nithyananda J replied on February 13, 2011

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-could-not-connect-to-the-system-event/ce621cf9-577a-407E-86a1-62bbfc3d5129

    After back if still the problem persists. We will be happy to help you further.

    Thank you

  • Said computers that windows could not connect to the system event notification service

    Said computers that windows could not connect to the system event notification service. Does not connect as an administrator.

    I played the system restore. Solved the problem, but why did it happen?

  • Windows could not connect to the system event notification service service.

    Hello

    For the moment, I have a problem as in the title. Whenever I have Windows startup, a message box appears to tell me that it couldn't connect to the system event notification service service. I also lost my Aero theme too, they was disabled and cannot be enabled. I checked all the services, and they work fine. I tried "'winsock reset", "sfc/scannow" but nothing doesn't change.

    BTW, here is my journal CBS . I use Nod32 Antivirus.

    Sincerely,

    Quan Nguyen T.A.

    The WAT update seems to have been falsified.

    The installed product key is a MSDN one which was broadcast all over the internet.

    https://www.Google.com/search?q=2CGXT-3BQDX-DG8BM

    The installation is a counterfeit.

    You must reformat and reinstall using authentic materials and key.

  • System event notification services error

    A couple of weeks, I started getting a message at startup in VISTA. The message appears in the lower right. It is said:
    Unable to connect to a windows service. Windows could not connect to the System Event Notification Services service. This problem prevents the limited number of users logging on to the system. As an administrator user, you can view the system event log to see why the service failed.  But couldn't find anything; where should I look?

    Linda Schillemore,

    To open Event Viewer for more details on this error do the following:

    Click the Start button. In the Search box, type Event Viewer, and then in the list of results, double-click Event Viewer.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Startand type cmd in the box start the search .
    2. Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
    3. To order invites, the following line and press ENTER: sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved.

    If this does not resolve the problem, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

    The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type System Restore in the Search box, and then click System Restore in the list of programs . If you are prompted for an administrator password or a confirmation, type your password or click continue.
    2. In the System Restore dialog box, click choose a different restore point, and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

      The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Let us know your result, thank you.

    Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Errors with the System Event Notification Service and Services.msc

    I tried to watch the last questions in this Web page before this announcement. I'm using a desktop computer NEC and somehow, every time that I boot on my computer, then I logged

    on my account, "System Event Notification Service does not work. Contact your administrator... "blah blah blah. I tried using Services.msc and administrator
    However, I use my computer now on safe MODE and Normal mode. Oh yes as I'm in safe MODE, I can't start anything in Services.msc. I can, however, restart the services, but it doesn't seem to work.  Someone help me turn my computer back to normal? : D

    Hi Chuayujie,

    1. did you of recent changes on the computer?

    2. are you able to work on your computer in normal mode after receiving the error message?

    If you can boot into normal mode, you can try to perform a SFC scan and see if it helps.

    You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Hope this information is useful.

  • Windows 7 system event Notification services error

    Today, the screen was different and wa Windows 7 does not properly. I got this message "unable to connect to a windows service. Windows could not connect to the System Event Notification Services service. This problem prevents the limited number of users logging on to the system. As an administrator user you can view system event log to see why services did not respond. »

    Other messages on this guy named Windows Vista. I use Windows 7. Can someone tell me please how to fix this?

    Thank you

    I have now managed to solve the problem by doing a system restore. He has really worked. Click Start, type system restore in the search box, click System Restore, and then click on "choose a different restore point. A date will go up which was the last restore point I guess and keep clicking next and follow the instructions. It can work for you. I would be interested to know how you go.

  • I get an error, "Unable to connect to the Service of system event Notification service" on the computer.

    Original title: unable to connect to a service of windowns

    I had this problem! "Unable to connect to the Service of system event Notification service. This problem prevents standard users to log on to the system. As long as administrator, you can go through the system event log to see why the service did not respond"how to solve?

    Hello

    Thanks for posting this question in the Microsoft Community.

    From your post, it seems that you can not connect to a windows service.

    When you receive this error?

    Check if the Service Notification of system events is running or not. To check the services

    a. click on start.

    b. in the start search box, type "Services".

    c. click right on - RUN AS ADMIN

    Check if the below mentioned, service was mentioned State and type start.

    System Event Notification Service started automatically

    Go back with the details so that we can help you better.

Maybe you are looking for

  • iOS 10 damaged my iPhone 5 s

    After the upgrade to ios 10: -my battery really fast (4 pm even if I don't use it) -my contact id does not work at all (it won't even let me set up) These problems came after updating to ios 10, before the update, everything was ok. Can someone help

  • Tecra S5 does not start on new battery

    HelloI recently bought a new battery for my Tecra (the original one has been able to the laptop for less than 10 minutes).When I put the new battery (which is fully charged) in my laptop and try to feed upward, the system hangs with a black screenand

  • Still Life 2 will not start?

    I waited for always in this game.  I installed it, but I can run.  Whenever I click the icon on the desktop for him, it's just that sound like when you try to complete a program in the Task Manager, but no error message appears.  I tried uninstalling

  • upgrade memory p-7 - 1226-64 bit

    has only 2 memory slots, one with 2 GB DIMM 1333 MHz MICRON and the other location has 4 GB DIMM RAMAXEL 133GHz.  To increase, the slot from 2 GB to 4 GB is necessary get the same RAMAXEL (assuming that it is the brand name, like Kingston, yes) brand

  • limit the speed of Internet on Simulator

    Hello Can limit us the speed of the internet to the Simulator? I want to test my application in a situation close to reality (especially the "loading screen"). And with my LOCS, I do not see my message "Please wait" :-) I not found any related post,