Still Life 2 will not start?

Similar Questions

• Firefox will not start after update

  Firefox will not start today. I think he had an update yesterday.
  Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
  Renounce top almost ready

  Hello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.

  Fix Firefox problems caused by malicious software

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

• IPOD will not start power over

  My ipod touch will not start after as I hold down the power button / stop for 10 seconds; other on my ipod touch for 10 seconds, at the same time & release button with no luck.

  Any other way to get the iPod touch to start or turn it on?   Who sets the ipod touch?  A centre of repair or store for ipod touch?   What are the costs of repair.

  Try the remaining shares of:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Satellite A500 will not start

  I have an A500 on 12 months old that will not start.

  The battery light shows white and power on AC light is on as well.
  When button "power on" is pressed and released the laptop IT flashes briefly then the battery lights up orange briefly and the light goes out.

  Battery has been divested of the case and it was completely discharged and it still will not with or without the battery. He has been connected to a different power of toshiba with the same results.

  The difficulty feeding saw two days ago. After that about 10 minutes to load then turned on.

  I saw a post where the guy was acquitted of the internal cmos memory and he ends up - which would have something to do with it?

  Any clues anyone?

  Hello

  I think that it s something wrong with the motherboard or a part of the motherboard.
  The point is this laptop should turns on even if the battery is empty and the power adapter is plugged so maybe it s something wrong with the memory supply or electronic power on the motherboard.

  I recommend you check the parts of memory first. Remove a module and try to start the device using that one module.

  Of course this can not help you too... so in this case, it could be a severe motherboard issue...

• HD will not start from host organization but will be of a different MBP

  ((Two Mbit/s: 1) mid 2010 i5 model 1) Middle model i7 2011.

  From here, I will call them as "i5 and i7.

  The i7 was having starting problems. The taskbar would charge about 2/3 of the way in which it would "hang up" then the screen turns off. Unsuccessfully trying to boot in safe mode. Verbose mode would freeze as well. Tried the single user mode and run ' fsck - fy "and it made no difference. No idea how fix permissions with the utility El Capitan disk but I'm not sure it would make a difference. Doesn't it?

  I then did a backup/clone of the i7 to a new external storage disk. All programs and files are successfully transferred.

  Then I wiped the i7 with a clear three-pass and reinstalled OSX.

  Error #1) I have not test to see if the hd now Virgin began its host computer before you restore the old files.

  Error #2) I put the clone on the i7 copy using Super Duper.

  When installing the i7 to its host computer, it wouldn't boot in any mode just as before.

  * Comment: The i7 will start the i5 laptop when connected via USB in system preferences > startup disk.

  I am currently using the i7 connected to the external i5 as I type this.

  Disk utility has been run on the i7 at this point by indicating zero problems.

  Onyx has been run through all the options and check marks with no problems.

  Always the i7 will not start its host computer.

  I am very confused.

  Issues related to the:

  (1) why/how this phenomenon occur?

  (2) in making the i7 clone for external storage, if there was a hidden virus or something on the i7 origin, is the now compromised storage device?

  I read it twice and I'm still a little confused.

  When you cloned the i7, you do it from the other computer?

  I get the i7 disc starts from the i7 computer when it is connected to the outside. Is this correct?

  If the player starts in an external of the i7 box, but not in the computer the case most likely is the SATA cable to the hard drive.

  Try to replace.

  Kim

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Satellite A40 will not start or start the BIOS

  Hello

  I have a portable Satellite A40 2 days ago decided to turns off while I was on the internet, and now it does not restart. I tried removing the battery and leave overnight, but it still will not start. When give you it power outlet, the AC LED is green and if you press the button power turns on the green power light, but that's all, the HARD drive light does not illuminate, the fan does not come on, no sound from the HARD drive and nothing on the screen, not even the backlight. You can also feel the heatsink gets hot (without excess however)

  If you insert a CD, you can here read the disc, and find things out there, too, now the power button still cut off the laptop.

  If anyone has any advice on what may be the cause, or any way I can get the machine to reboot again, that would be greatly appreciated.

  Hello

  Have you tried to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?

  Your description sounds like the malfunctioning of the internal display, but it is only a suggestion and a few trials are required to obtain a diagnosis right.

• HP P6280 desktop will not start

  Hardware: HP Desktop, 2.5 Ghz/6 GB RAM 6280

  Software: Windows 7 Home Premium

  Symptom: Slider, upper left corner flashing. Will not start windows. Does not start the system recovery

  Tests: will start at diagnosis; all components are

  Visual: all current fans running, hard drive access light blinks.

  Tried:

  1. how to remove the card reader and re - start with a statement found here. No change

  2. removed the hard drive and connected to another computer via the USB interface. The road climbs and all the folders/files are present

  3. re-installed the hard drive and the boot order changed to search first of hard drive. Still no change.

  Question: Do you think a FIXBOOT is possible hard disk using a different computer with the hard drive via the USB interface?

  Any other suggestions would be appreciated.

  Hello

  Please use the following link

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/black-screen-w-blinking-cursor/TD-p/1330837

• Pavilion ID46 g6 will not start

  Product: Pavillion g6 ID46

  [Edited by Moderator] Serial No.

  Product # A6Z74UA #ABA

  OP sys: Windows 7 Home Prem OA

  Pavillion G6 my husband will not start. What happened: returned to the computer after being away for a while, shook the wake up the mouse and the screen «has exploded in many colors and motion pixels» Screen went black, then a screen "do you want to start in safe mode" popped up. He tried a start-up without danger, but he failed and gave him a Bios Application error 501. He tried to restart the computer, but it crashes on the 'Starting Windows' screen with 4 color icon.

  I have:

  Removed the battery and tried to restart. Not good.

  Has taken the hard disk and and reinstalled it. Ditto.

  Tried to boot mode safe, before and after the following below. "Loading files" still stuck on Windows\System32\drivers\CLASSPNP. SYS

  Burned and ran a repair disc. Took 4 hours and the program ran at the end when I was asked to reboot. Computer hooked on "Starting Windows" screen. (I left this screen function for more than 5 hours without this change.)

  Ran the program System Repair twice, same results.

  Start of Tests ran. After self-test of the main hard drive, hard drive SMART and verification Test of memory system (passed 100%)

  Tried to restore the BIOS using Windows + B and power with several attempts. Button Power LED stays on, about 20 seconds later a small LED on the "caps lock" key flashes white twice. Black screen and nothing happens after 5 minutes. He raised his eyes and 2 flashes is supposed to be the corruption of the BIOS.

  Error log lists these: quick 03F0 303, 501 error and error of hard disk 1.

  I have a lot of intelligence of the computer, so appreciate any help you can give, especially if assistance is simple and easy to follow terms.

  Mahalo in advance!

  Well, nothing worked and I did not attempt to remove the HD and turn it on again. Husband returned to a comp sci student who managed to get some info on the HD, but said that the HD was shot.

  Good thing is that I got a new Asus laptop and put my old computer to my dear husband. So, I guess that the problem is solved!  Thanks for your help.

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• SSTP will not start. Error 2.

  I need help to find out why the SSTP service on my lapyop will not start.

  Error is:

  Windows could not start the SSTP service on the local computer.

  Error 2: The system cannot find the specified file.

  The dll that service points is actually in the system32 directory, and I even replaced with that of another phone exact same that's working and I still get the error.

  I tried sfc/scannow and some not found errors.

  Everything is said in the event log is that the service could not start because the specified module could not be found.

  Please don't tell me to restore my computer that I can imagine that will work but probably someone out there has a solution. Thanks for any advice.

  Hello

  I suggest you try the steps below to resolve this issue.

  Step 1:

  Reset TCP / IP:

  a. Click Start > all programs > Accessories-> command prompt (right click and choose Run as administrator)

  b. at the command prompt, type:

  netsh winsock reset

  c. ignore errors and restart.

  Step 2:

  LocalService and NetworkService to the group administrator:

  a. Click Start and search CMD. Right-click on it and choose Run as administrator.

  b. at the command prompt, type: type the following command:

  net localgroup administrators localservice / add the Group of local administrators LocalService / add

  net localgroup administrators networkservice / add localgroup administrators NetworkService / add

  c. close and restart the computer.

  Thank you
  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer HP Photosmart will not start

  I am not necessarily in a hurry for an answer.

  I use a HP Photosmart 7260, S/N CN38Q2B0ZQ, Q3005A printer, model # SDGOA - 0372, with a Mac OS 10.5.8.  Printer blinking red and will not start.  There is no driver for the printer.  I had for a long time, never had a problem.  What should I do?

  Red flashing red in the light, I think that your machine has no status. If it flashes in the light of memory card, then there is an error with the memory card. Unfortunately, the machine is 7 years old and has lived a long life that printers are concerned. It would not be surprising if it has passed. This doesn't seem to be a hardware problem.