IOErrorEvent ID 2031, AIR desktops and local server

Similar Questions

• Win 7 remote desktop and Local printing does not

  I cannot using the network printer locally when I use remote desktop to connect to a Vista computer.  Tab resources for RD, I checked the printers.  The only thing I can understand is that my local network printer, not directly connected to my machine.  Whenever I try to print over my remote desktop session, I can not access my local network printer.

  I installed the printer drivers on the remote computer and when I try to locate the printer, I get the following error message: "Windows cannot connect to the printer.  Print Server Spooler service is not running... "but the spooler service IS running Board.

  Any advice would be greatly appreciated.  I spent a few hours on this one and am at a loss at this point.

  UPDATE: I tried to connect my printer to the local USB port this morning.  Still would not work.  I get the same error of queue.  The drivers are not corrupt, as others have indicated may be the cause.  They work very well on my system locally with 7.

  I also found a post elsewhere that he issue 'sharing permissions' and 'network permissons' setting to resovle the spooler error.  Still no go.

  Help, please.  I really need to print locally.

  I finally have figued try after four days and many hours on the phone with Microsoft.  Microsoft said it was related to my router settings, but I didn't believe it because the remote computer has seen my iPhone very well when it was connected locally.  After just playing, here is what I found... it was pretty basic!

  On the remote system, when you try to add a 'local' printer, it has a drop-down list with a list of local ports who sees your system remotely.  Some of those who will be on the remote system, but others will be on your local system.  Take note of those that are visible on your local system.  In my case, LPT1 was not visible, but was COM3.

  Then, on your local system, in the settings of your printer works (printer, Ports tab properties), there is a checkbox indicating "Enable Printer Pooling."  When you check this box, you can select multiple ports on your local computer.  Here, you must check the box that shows your remote system (in my case, this is COM3), but make sure your exisitng port is checked as well as (in my case, an IP port for my wireless router).  Basically what you do is on your local system, you are pooling your installation existing printer with a port that can be seen by your system remotely.

  Then, on the remote system, install the printer drivers, but do not select a port.  Then go to printers and add a printer.  Select 'local' facility for whom and when asked for the port, use the port that you checked in the previous step on your local system (in my case, I chose COM3 on my local system).  Select your printer from the list.  It will ask you if you want to use the existing drivers... say Yes.  Print a test page to make sure it works.  Worked fine for me.

  I can simply not believe how obvsious this solution has been!  If the remote system is unable to see the port that you are using currently, pool your configuration with a port that he can see!

• Android web server and local

  Hello

  First of all, quick summary of my configuration:

  • 6 devices - 3 Android and iOS 3 devices all connecting via wireless
  • LAN with my own Web server and DNS. All Web sites are configured to work outside virtualhost such as mysite.local and can be access in the browser on my desktop and all devices
  • My own local server weinre works again since all devices
  • My own PC with Chrome and and extension edge inspect
  • All devices can connect on board to inspect without any problem and in a position to use synchronized browsing Web sites on the internet

  I just upgraded to the full version of creative cloud and now I can view is more Web sites on my LAN in edge inspect but ONLY on my Android devices. I would absolutely swear that my Android devices to connect but for some reason, they cannot now and I get a message "Web Page not available". In addition, it shows the IP of my desktop (I guess this is how to inspect dashboard works?) as the address that it is unable to connect. On the back of this, I tried to connect to this IP address in the Android browser but nothing happened, and I turned off the firewall on my desktop PC but still no luck. Finally, I tried everything Android devices on their own without the connected devices iOS, but also with all 6 are connected and it's the same thing every time.

  Anyone able to help?

  Thanks in advance,

  Chris

  Hi Chris,

  OK, got it. I'm sure that I know what goes wrong. In iOS, the .local domain names management is automatic, but we had to in Android code in a solution for this particular situation. In iOS, .local refers to the local computer, so when the Android client sees that URL to enter, she replaces part se1united.local of the URL with the IP address of the machine running edge inspect. In most cases, that works, but in your case, it seems that you are in fact trying to refer to a third machine whose IP address must be resolved in dialogue with your own domain name server. The code native iOS that runs properly and is not our code custom Android.

  So there is a problem with our Android app, but I suspect the fix for this will not be easy. In the meantime, there should be some simple solutions, you can choose from your side which must make things work correctly with applications Android and iOS.

  1. In Chrome, try referring to your site with the following URL: http://192.168.1.50/ OR
  2. Rename your server from se1united.local to something that does not include the part ".local" domain name

  I think that is one of those who should work fine.

  Let us know if you have any other questions or problems,

  Mark

• ASA CA LOCAL SERVER backup and restore

  Hello

  I would like to Setup cisco asa for a CA server and provide the authentiaction of the user about digital certificates.

  I was wondering is it possible to make a complete backup and restore configuration including ca local server (root certificate) certificates user and cross to another ASA firewall if location hw?

  x 10

  Please see the backup attached and restore the procedure via CLI...

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no p

  Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no problem. Can someone help me? Thank you.

  Is there a file .idlk remaining on the server which is not removed properly?

• How Exchange View screen between local files and remote server?

  I just need to know how to switch the display between local files and remote server, I want my files the on the left and the remote server on the right.  I had it set up before, but just got a new computer and can not remember how I did it.

  Its OK, I found it. Thank you

• Hello. I have Lightroom 4 works great on my desktop and laptop computers, but I also have a macbook air. Should I have

  Hello. I have Lightroom 4 works great on my desktop and laptop computers, but I also have a macbook air. Do I have to buy a new lightroom 4 to work with my macbook air or is there a way I can get my current version to work with her? Thank you

  The license agreement provides for 2 computers, then you could remove one of the others and always to comply with the license.

• Problems with BBC iPlayer Desktop and Adobe Air for Mac

  I would be grateful to anyone who can help me with a problem I have on my laptop computer running Mac OS X Lion 10.7.3.I has problems running BBC iPlayer Desktop, and I suspect that it is caused by Adobe Air.

  Recently, I was invited to update Adobe Air to the latest version (from February 2012) and after I updated the program, it started to cause problems when I used BBC iPlayer desktop.

  The first problem is that I was unable to play any programs downloaded mode full screen-, I have noticed that the sound is played, not the video.

  Secondly, a few weeks after the beginning of this problem, all my TV programs have mysteriously disappeared.

  My last problem is that whenever I run the BBC iPlayer application it is impossible to download new programs - when I am connected to the internet, the application always says he's 'offline '.

  I tried to solve the problem by rebooting my computer, uninstall and reinstall the BBC iPlayer, deactivation and reactivation of my firewall, connection to the internet in different places, but this has not solved the problem.

  I tried to uninstall Adobe Air, but the installation package says it is "corrupted". So I tried to download and reinstall the application from the adobe website, but already, the computer recognizes that the application is installed. either - I can't uninstall or reinstall Adobe Air.

  I contacted the support of BBC iPlayer and they are unable to help - direct me to your Web site. I have read several other topics of discussion published on this site but not found the solution that I'm looking.

  Please some can help me to solve this problem, helping me to uninstall and reinstall Adobe Air for Mac?

  I'm not very technical, mind - for example - I don't know what log files are or how to find them - so please explain as simply as possible.

  Thank you in advance for your help!

  Ryan

  Hi Ryan,

  Could you try to delete the folder preferences of BBC iPlayer then restarting iPlayer to see if that helps?  You should be able to find this in ~/Library/preferences.  Find the folder from BBCiPlayerDesktop and a long series of characters and move or rename this folder.

  Thank you
  Chris

• Local and remote server reversed in CS5

  I've just upgraded to Dreamweaver CS5 of CS3. I usually download files from local to a remote server by clicking on the button "expand to display local and remote sites" and drag the file on the local server to the file on the remote server. In CS3, the local server is on the left and the remote server has been right in the expanded view. In CS5, it is reversed, with the local server on the right and the remote server on the left. Recently I accidentally did drag a file to the remote server on the local server, crush a lot of work, I'd just do it, because I was used to the servers being on opposite sides. Very annoying, to say the least.

  Anyone know why they did this way in CS5? Is it possible to move the view so that the local server is on the left and the remote control is on the right in the expanded view?

  Hello Sarah,.

  You can change locals and remote to your wish

  On Windows:

  (1) go to the button Edit on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  On Mac OS

  1) go to Dreamweaver on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  I enclose the snapshot of the Preferences dialog box with the circle where you need to work

  

• Number of concurrent connections to remote desktop on Windows Server 2008 and 2012

  Dear,

  Can someone help me with what is the maximum number of concurrent connections on Windows Server 2008 (Standard & Enterprise) and Windows Server 2012 as well.

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Connection remote desktop and printing problems

  Hello

  I use Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I have noticed there is problem with printer problems. Sometimes, when I tried to print some documents with applications in Windows Server with my printer in my room, connected to the desktop computer, it won't work.

  Besides, I need to go to Windows Server, restart the Printer Spooler Service component, so it does not yet. It is a pain.

  I also noticed there is to wait about 30 seconds to process any document to print.

  Unlike if I print documents directly from my local desktop computer that is running Windows 7 and is connected to a local printer, it takes seconds to print.

  My office is connected to Windows Server 2008 via LAN. I wouldn't have such a significant delay in printing.

  I also wonder why Printer Spooler needs to be restarted when the printer does not work.

  Can someone advise me on this? Peut - what Microsoft looks at this problem and release updates to fix the bug to improve the system?

  Thank you

  Kind regards

  Clement

  Hello Clement,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Best way to Air desktop HTML RICH Editor

  Hi, actually, I try to get a WYSWYG Editor to work on the air.

  Something like tinyMCE / ckeditor (like the one I m using everything by writing this question).

  I want to paste pictures there and work with tables too...

  For now, what I found is that I should use a stageWebView to load a html element...

  I made an html page and uploaded to my server.

  It works if I go to the page via the browser, but when I try to load it to the stagewebview, the editor isn't here...

  I flash CS6 and air Office 3.9 m

  Any idea on how can this be achieved? Perhaps another approach? Any component out there?

  Thanks in advance,

  Gonçalo Miguel

  I suppose initially that it does not work because TinyMCE can think it's running for the wrong way. The same way, that you configure most of these editors 'relatively' find out where his files, TinyMCE may simply not be able to find its libraries. For example, if you use an invalid parent include as where is incorrect.

  A quick way to know, it's just point to the script with a complete address, http://www.yoursite.com/

  Just tried quick, works for me:

  

  And local running using the file (with a HTML wrapper):

  

  

• Firefox cannot connect to a local server subdomain if no available network connection.

  Hello

  I have a laptop that is configured as a local server using Apache. On this, I use "localhost" as the domain and have several subdomains.
  Now, if I have no network connection (to any other device) available on this laptop, and then with Firefox I am only able to access the domain 'localhost', but none of the subdomains and get a "Server not found" error on these. If I have a network connection, I can access the domain and subdomains with no problems.

  What it could be and what can I do to make it work without a network connection?
  I also tried with Opera and Chrome, and they can access subdomains anyway.
  Unfortunately however I prefer Firefox, then Yes... I am here.

  Kind regards
  Song

  Troubleshoot you your network connection in the Options menu? Firefox cannot load websites but other browsers may

  If internet not configured correctly, you may have a firewall set in place? http://www.aboutdebian.com/network.htm is what I used as a reference.

• Unable to see the Collections in remote desktop Services in Server Manager

  It doesn't seem to be a category for Windows Server for some reason, so I apologize if this is in the wrong category:

  We recently had an administrator leave our of the it group, and he was the one who had set up our fund services / remote server.  Recently, we wanted to deploy another remote application and found that we were not able to see the "Collections" option in the server in remote desktop services manager.  The only option listed is "servers".  However to reactivate the account administrator and the server like him gave us all permissions to see the option of Collections and to deploy another remote application.

  My question would be, this is a policy of setting Group / somewhere that is limiting the other users of the full access to Office services in Server Manager remotely.  I looked everywhere on the server (and google) to see if I could find where this setting is vain.  Any suggestions/help would be greatly appreciated.

  Thank you!
  Heda

  Hello

  Server forums are in an another Microsoft Community to it.

  This community is mainly for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.