A Wi - fi connection does not work

Similar Questions

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Socket connection does not work with SIM network

  Hi all

  I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

  Can someone tell me why socket connection does not work when I use the SIM card network.

  If anyone knows about internal or the following BlackBerry setting that also tell me

  "Option-> advanced-> TCP Option.

  Thank you

  Neeraj Chauhan

  Thanks Peter,.

  For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

  Thank you & best regards

  Neeraj Chauhan

• A Wi - Fi connection does not work on my Satellite M50-106

  Hello

  I need help with the Wi - Fi does not work on my Toshiba Satellite M50-106
  The pilot is OK but will not.
  I had to format the computer

  Hello

  At first be that wireless network adapter is installed and registered properly in Device Manager.
  If everything is OK he make sure card WLAN is enabled correctly.
  Use the combination of keys FN + F8 to enable it, if necessary.

  After doing this scan the area and connect to your WLAN.

  It sounds simply enough now. Please post comments and to inform us if the problem persists.

• Restore windows files when the connection does not work

  After an accident at some point, I noticed "Restore to folder windows when connecting" did not work.

  In "Folder Options - view" it is checked.  Also, I did 'Restore Defaults' and rechecked it.

  Confirmed also with regedit it wasHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\PersistBrowsers set.

  Another user on the system do not have the problem.  How can this be corrected?

  Concerning

  Ray

  Raymond,

  What is the version of Windows installed on the computer?

  I wish that you perform a scan of System File Checker-

  https://support.Microsoft.com/kb/929833/en-us

  If it does not then, I would have you decant the contents of the user account to a new user account this account is possibly corrupt.

  Refer to this article-

  http://Windows.Microsoft.com/en-CA/Windows/fix-corrupted-user-profile

  Thank you.

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• Why my wifi connection does not work correctly?

  I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

  Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

  I came across a thread that told me to access prompt as administrator and type in this

  netish int ip reset

  I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

  ipconfig/flushdns

  now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

  Hi Veronica,.

  Thanks for the reply.

  Sorry to hear about the inconvenience caused.

  According to my understanding, you are having trouble with internet connectivity.

  You upgrade windows or what was the first operating system installed on the computer?

  This problem is mainly due to drivers get damaged.

  To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

  Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  To download the latest drivers from the computer manufacturer site, see the link below:

  http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

  Hope this information helps, for assistance please answer.

• SIL_InsertRowInRuntable failed (ORA_R12_Flatfile connection does not work)

  Hello
  
  I'm running an Oracle BI Apps 7.9.6 installation with vision R12 Oracle instance. DAC (v10.1.3.4.1) and Informatica (8.6 fix applied already) are configured correctly. I tried to do a test with just Oracle R12 Financial - debtors and it failed during the SIL_InsertRowInRuntable step failed. I have error in an output file and go back all the way to the SIL_InsertRowInRunTable server\infa_shared\SrcFiles\ORA_R12_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt. And in this file, it mentions the $$ FlatFileConnection = ORA_R12_Flatfile. In the physical data Source, the warehouse and the connection to the source Oracle R12 work very well, but the ORA_R12_Flatfile does not work. It says nothing about setting up connection flatfile in the doc of installation/configuration of BI apps. In some blogs, he talks even removing some unnecessary connections. I know that I have to the flatfile connection to bring in some of the flat files. Any suggestions?
  
  ORA_R12_Flatfile.datawarehouse.silos.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
  
  [SILOS. SIL_InsertRowInRunTable]
  $$ ANALYSIS_END = 01/01/2011 12:59
  $$ ANALYSIS_END_WID = 20110101
  $$ ANALYSIS_START = 31/12/1979-01:00
  $$ ANALYSIS_START_WID = 19791231
  $$ COST_TIME_GRAIN = QUARTER
  CURRENT_DATE $$ = 10/08/2009
  $$ CURRENT_DATE_IN_SQL_FORMAT =' 17:16:27.14 2009-08-10'
  $$ CURRENT_DATE_WID = 20090810
  $$ DATASOURCE_NUM_ID = 9
  $$ DEFAULT_LOC_RATE_TYPE = company
  $$ DFLT_LANG = US
  $$ ETL_PROC_WID = 20832376
  $$ FILTER_BY_LEDGER_ID = 'N'
  $$ FILTER_BY_LEDGER_TYPE = 'N'
  $$ FlatFileConnection = ORA_R12_Flatfile
  $$ GBL_CALENDAR_ID = accounting ~ 41
  $$ GBL_DATASOURCE_NUM_ID = 9
  $$ GLOBAL1_CURR_CODE = USD
  $$ GLOBAL1_RATE_TYPE = company
  $$ GLOBAL2_CURR_CODE = USD
  $$ GLOBAL2_RATE_TYPE = company
  $$ GLOBAL3_CURR_CODE = USD
  $$ GLOBAL3_RATE_TYPE = company
  "$$ HI_DATE ='3714 - 01 - 01 00:00:00.0"
  $$ HI_DT = 3714/01/01 12:00
  "$$ HR_ABSNC_EXTRACT_DATE ='1980 - 01 - 01 08:19:00.0"
  $$ HR_WRKFC_ADJ_SERVICE_DATE = 'N'
  $$ HR_WRKFC_EXTRACT_DATE = 01/01/1970
  "$$ HR_WRKFC_SNAPSHOT_DT ='2004 - 01 - 01 00:00:00.0"
  $$ HR_WRKFC_SNAPSHOT_TO_WID = 20090810
  $$ = Hint1
  $$ = Hint2
  $$ Hint_Tera_Post_Cast =
  $$ Hint_Tera_Pre_Cast =
  $$ INITIAL_EXTRACT_DATE = 30/06/2005
  $$ INVPROD_CAT_SET_ID = 27
  $$ INV_PROD_CAT_SET_ID10 =
  $$ INV_PROD_CAT_SET_ID1 = 27
  $$ INV_PROD_CAT_SET_ID2 =
  $$ INV_PROD_CAT_SET_ID3 =
  $$ INV_PROD_CAT_SET_ID4 =
  $$ INV_PROD_CAT_SET_ID5 =
  $$ INV_PROD_CAT_SET_ID6 =
  $$ INV_PROD_CAT_SET_ID7 =
  $$ INV_PROD_CAT_SET_ID8 =
  $$ INV_PROD_CAT_SET_ID9 =
  LANGUAGE_CODE $$ = E
  $$ LAST_EXTRACT_DATE =
  $$ LAST_EXTRACT_DATE_IN_SQL_FORMAT =
  $$ LAST_EXTRACT_DATE_WID =
  $$ LAST_TARGET_EXTRACT_DATE_IN_SQL_FORMAT =
  $$ LEDGER_ID_LIST = 1
  $$ LEDGER_TYPE_LIST = 'NONE '.
  $$ LOAD_DT =' 17:15:37.907 2009-08-10'
  $$ LOW_DATE = TO_DATE ('1899-01-01 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
  $$ LOW_DT = 01/01/1899 00:00:00
  $$ MASTER_CODE_NOT_FOUND =
  $$ ORA_HI_DATE = TO_DATE ('4712-12-31 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
  $$ PROD_CAT_SET_ID10 =
  $$ PROD_CAT_SET_ID1 = 2
  $$ PROD_CAT_SET_ID2 =
  $$ PROD_CAT_SET_ID3 =
  $$ PROD_CAT_SET_ID4 =
  $$ PROD_CAT_SET_ID5 =
  $$ PROD_CAT_SET_ID6 =
  $$ PROD_CAT_SET_ID7 =
  $$ PROD_CAT_SET_ID8 =
  $$ PROD_CAT_SET_ID9 =
  $$ PROD_CAT_SET_ID = 2
  $$ SOURCE_CODE_NOT_SUPPLIED =
  $$ TENANT_ID = DEFAULT
  $$ WH_DATASOURCE_NUM_ID = 999
  $DBConnection_OLAP = data warehouse
  $DBConnection_OLTP = PARAM_OLTP_SIEBEL
  $PMSessionLogFile = ORA_R12_FLATFILE. DATAWAREHOUSE. SILOS. SIL_InsertRowInRunTable.log
  MPLT_GET_ETL_PROC_WID. $$ ETL_PROC_WID = 20832376

  "ERROR: Workflow SIL_InsertRowInRunTable: could not start this workflow execution because running on this Service of integration is not yet over."

  Can you charge CAD screen shot of current test cycles and run history? Can ensure you that all the previou run is marked complete, if it does not, right-click and mark complete, it wil lask code confirmation.

  Try the handle again. See if you get the same error message, there is really no explicit configuration necessary for flatfile as long as you choose the ORA_R12_flatfile in the settings for the execution Plan (do not select just the FlatFileConnection as its data source ia by default 16), your settings file looks ok.

• A Wi - Fi connection does not work. Does not recognize Fn + F8

  Trying to help my boss with a problem that seems to have his laptop. His computer could not get along with wifi.

  Does not yet recognize her here. I did some research and tried to install the new drivers and flash cards causes the Fn + F8 button does not work. When you press them, the display shows the rest of the keys F, but F8 is not there.

  Nothing is done, nothing.

  Hardware problem?

  As a first step, you should tell us what model laptop was your boss?
  What operating system is installed?
  Laptop is preinstalled with original Toshiba (factory settings) recovery image?
  Wireless network card is recognized correctly in the Device Manager?

  ....
  I mean without some basic information it is not easy to start serious discussions, isn't it?

• A Wi - Fi connection does not work on my Satellite L635-10 t

  Help!
  I have reinstalled Windows on my laptop, installed all the drivers, but the wifi does not work! What can be with my laptop?

  Perhaps is not activated WLAN card correctly?

  Use the FN + F8 key combination and remember the wireless network adapter is correctly enabled.

• My internet connection does not work. IP Config (ipconfig) is in error.

  My internet does not work. When I type IPCONFIG at the command prompt. It gives the error follliwng:

  An internal error has occurred. The request is not supported.  Unable to query host name.

  Contact support services technical microsoft for more help.

  Additional information: host name of request impossible.

  Try to reinstall/network card upgrade for you device drivers

  Hope this will do the needfull

  Please let us know

• network connection does not work on the static ip address

  Hello:

  I am newbie for vmware, recently, I've converted a windows 2008 virtual domain controller, after the fact, everything works fine on the IP of the DHCP, but after I change the static ip address, I can always ping the IP but the DC lost its functionality and internet does not work.

  Any idea or help that can make my static ip, would be very grateful if someone can help! Here is my network configuration:

  

  Hello and welcome to the community

  There are a few things to consider in this regard

  First of all, it is not a simple task to change the IP address a domain controller, so I don't know what procedure you followed

  Just in case, here is the procedure to do so:

  http://TechNet.Microsoft.com/en-us/library/cc794931 (WS.10) .aspx

  Second of all, to virtualize a domain controller also has a specific process that must be followed.

  Most of the people prefer to create a new virtual domain controller and move all of the above roles.

  Here are two rounds, that you might find useful:

  http://communities.VMware.com/thread/209813

  http://communities.VMware.com/thread/209889

  Don't forget to assign points if you find this useful/correct

• Automatic connection does not work after re - install

  Visited bad link in Facebook! Subsequently, forced to re - install Firefox - from scratch! Saved some files profile as Favorites, passwords, but no extension tricks. Re-installed FireFox after removal of ALL titles I could find in Program Files, Program Files (x 86) and Windows 7 Pro profile.

  When visiting a page that requires a login, Firefox correctly fills the username and password. BUT it does not start the connection. In the past, it was essentially a background process and not really visible to me. Now, stop at the page requesting credentials and click on the button "login".

  I have 'THE VIEW', 'NOSCRIPT' and 'ADBLOCK PLUS '. ALL my plugins are in mode 'ask to activate '.
  I enabled extensions: 'ADOBE ACROBAT - create PDF 1.2' and 'Trend Micro NSC FireFox Extension 5.82.0.1056.

  I would definitely get FireFox to work as it did previously. I don't know where watch/tweak!

  Thank you
  WLPeavy

  Thank you. It was the cookies which were to be saved. I had no idea of the automatic logon which is recorded. Thanks again.