IOM - e-mail notification to a specific user, based on a dynamic State

Similar Questions

• Allow only specific users based on the list of users in a table

  We have a situation where we allow specific users that are stored in a table.
  

  create table ALLOW_USERS (username varchar2(30) );
  
  CREATE OR REPLACE TRIGGER USERS_TRIGGER
     AFTER LOGON
     ON DATABASE
  DECLARE
  BEGIN
    IF DBMS_STANDARD.LOGIN_USER NOT IN (SELECT USERNAME FROM ALLOW_USERS)
  
           THEN
                 RAISE_APPLICATION_ERROR (-20001, 'Unauthorized login');
         END IF;
  END;
  /
  
  Warning: Trigger created with compilation errors.
  
  SQL> show error
  Errors for TRIGGER USERS_TRIGGER:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  3/3      PL/SQL: Statement ignored
  3/38     PLS-00405: subquery not allowed in this context

  How to use the subquery above the trigger? or is there a better way to achieve required results.
  
  -Thank you

  I'm surpised nobody reported to functions attribute Event for customer event triggers and ora_login_user in particular:

  CREATE OR REPLACE
    TRIGGER NOT_SYS.RESTRICTED_USERS_TRIG
      AFTER LOGON
      ON DATABASE
      DECLARE
          v_cnt NUMBER;
      BEGIN
          SELECT  COUNT(*)
            INTO  v_cnt
            FROM  not_system.ALLOW_RESTRICTED_USERS
            WHERE username = ora_login_user;
          IF v_cnt = 0
            THEN
              RAISE_APPLICATION_ERROR(-20001,'Unauthorized login');
          END IF;
  END;
  / 
  

  SY.

  Published by: Solomon Yakobson on June 3, 2013 15:43

• E-mail notification must be triggered on impact the apply changes?

  Hi all
  
  Creates a form similar to a form of appeal, whenever the user create a new request and submit the request. E-mail notification will be sent to the user and the administrator.
  Here when admin ppl rejects the request, an e-mail notification triggered by the user as the application was rejected.
  
  I have three radio buttons in the form
  
  1.submitted (Default).
  2.rejected.
  3.accepted.
  
  When the administrator change request and select rejected box and apply the changes, a notification e-mail should be raised to the user.
  
  Now I have a submit after process of change which is triggered whenever the user press on apply changes and it will send the notification to the user and admin time.
  How do e-mail notification which should be triggered when the administration rejects the request and submit the form?
  use the apex 4.0 version
  
  When the Admin selects the radio button of rejection and tha press on apply changes, then the notification by electronic mail must be sent to the user.
  
  Appreciate your help!
  
  Thank you and best regards,
  Robette.

  Hello

  Copy the following code,

  BEGIN
  
  IF(:ACESS_APPROVAL = 'Rejected')THEN
  
       APEX_MAIL.SEND('Your request has been rejected');
  
  ELSIF(:ACESS_APPROVAL = 'Accepted ' or :ACESS_APPROVAL = 'submitted')THEN
  
       APEX_MAIL.SEND('Your request will be notified.');
  
  END IF;
  
  END;
  

• 11 GR 2 IOM - receiver setting E-mail Notification service

  Hello

  I use the notification e-mail Notification service. There is a case where I would have to send a notification to a DL or external mail that has not only any account in IOM. I find nothing in the API where you can configure the e-mail of the receiver instead of the user ID.

  No idea how this can be done by using the Notification Service?  I know that we can create a user account and assign this email ID to that account and try, but I would like to know how we can achieve without doing this or is there one way other than completely using java code.

  Thank you

  The IOM OOTB API does not support the user ID instead of any DL or identifying external mail.

  Its best to create a service account in IOM corresponding to these DLs/external mail and use OOTB IOM API to send mails using the user ID.

• notification when a vpn user connects or rear

  Is it possible to implement the ASA config so when a specific user logs in or out via the vpn client, an email is sent?

  You can distinguish the syslog message generated when the VPN authentication and send this message only by e-mail.

  You cannot, on the SAA itself, distinguish this message for a particular user and send notification of this user connection (AFAIK). You could probably send all connection events to a syslog server and then use it (with scripts) to send from the details of the events of the user.

• E-mail notification of workflow does not

  Hello

  We need to inform all users of the workflow. There is no 'NotifyAllParticipants' in Admin-> Actions-> Actions step workflow. But users don't receive any notification by email.

  Is there a required configuration?

  We tried to modify the futuretense.ini also, but it still does not work.

  Any help in this matter is appreciated.

  Thank you!

  Hello

  I tried this in my local machine and am able to send the notification to the participants (users).

  Check if you set the following properties.

  First of all:

  In futuretense_xcel.ini file set xcelerate.emailnotification = true.

  Second:

  Set the following properties in the futuretense.ini file.

  DSI EmailAccount = specifies the user account name that you want to use for outgoing mail. Is the name of the account (just the username) on the SMTP server.

  CS.emailpassword = specifies the password for the e-mail account used by the WebCenter Sites (specified by cs.emailaccount above property).

  DSI EmailHost = defines the host SMTP (mail server) which is used by the servlet ContentServer to create and deliver e-mail messages.

  CS.emailreturnto is specified, the e-mail address from which mail is sent to all participants in the workflow.

  Note: by setting the properties make sure that 'no. spaces' before and after the value.

  If above properties are set correctly, still no mail. Thanks for upload your Sites.Log.

  Please let me know if you have any questions.

  Kind regards

  Delphine Pilli.

• Make sure that 'tour windows xp' appear again for a specific user

  When I create a new account, a little balloon appears in the bottom right of the screen next to the notification area that says 'Windows XP Tour'. After awhile, she disappears.

  Is it possible to bring it back and make it stay there all the time? How could I do? There must be a registry setting that keeps track of the amount of time since an account was created or how many connections, so how can I change it to always do this prompt? Can I use an editor hex old-fashioned thus.

  I have an old relative who keeps forgetting basic skills such as how to reduce a window, the use of the taskbar and sometimes forget that the large list of programs are now under 'all programs' (although I solved it using the start menu classic.) I don't know what I'll do when she gets a new machine with Windows 8, since this feature has been removed in 7). I'm tired of always prompting you to go to start-> all programs-> Accessories-> windows XP of the Tower, and I tried to add an icon on the desktop. I want just the reminder it so she can click it before calling me for really basic things I taught him a dozen years with his Windows 98 computer. This seems to happen more frequently, and I noticed that she is 'slide' into other things as well, so I'll try to make up for it.

  P.S. I'm not sure which category I should be put under. I settled on "ease of access" because I try to help and an elderly woman in her late 90s access her computer when she keeps forgetting the basic skills. The tour is... temporarily.

  Hi SlickRBCD,

  If I understand correctly you have a problem with guided tour of Windows XP still appearing on specific users. Do not worry, I'm here to help you with this question.

  Let us try the following steps and check if it works for you.

  1. Start the registry (Regedit.exe) editor.
  2. Locate and click the following key in the registry:
     HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Tour
  3. On the Edit menu, point to new, click Dword value, type RunCount, set the data value 1 (one) and then click OK.
  4. Exit the registry editor.

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

  Please answer if the steps do not have hepl, so that we could help you better.

• I get my Facebook group e-mail notifications in my Inbox, but all other Facebook notifications go to my junk mail.

  original title: "Windows Mail" and Facebook notifications

  I get my Facebook group e-mail notifications in my Inbox, but all other Facebook notifications go to my junk mail. I put in my list of shippers and also the area for a week. Nothing helps. I double checked Facebook and everything is checked ok there. I'm going crazy trying to figure this out. Anyone else having problems?

  Well, you can look at this thread and what the user did there: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-phishing/4a5c8a1f-a224-444a-8639-4334a7ec4251#footer

  Steve

  I read the comments here, thank you. I thought I had turned off the "no automatic filtering. I have now found phushing and turned it off. This works! Phew...

  Thank you very much, Steve.

• Is it possible to e-mail notifications in EMI filter

  I enabled notifications in EMI, and it's writing me every event. I created a filter action event to the X-ray source and subtracts all actions. Since I subtracted all the actions that I don't see any events for X-ray source under the supervision of events, which is what I wanted, but EMI still emails me the events caused by the source X. is there a way to filter/disable e-mail notifications based on the IP of the attacker?

  Hi Henries

  I'm afraid not. As Email notification works on the basis of the level of risk and the alert level (high, medium and low).

  You could just mention what content you want to see in this notification and check which is how you activate box specific to a different entity.

  Rate if she responds to your request.

  Kind regards

  Akshay Rouanet

• E-mail notification triggered during the reconciliation of the Active directory trust

  Hello

  When we run the scheduled task of reconciliation of trust user Active Directory, the user gets created by IOM and sends a notification to the user to create . But, if there is no change in Active Directory for the same user (any attribute changes) and we run the recon work trust, will be change also trigger an email notification?

  I mean, is that the notification of the user to create triggers the user and Manager too?

  During the reconciliation of trust, generated notification is to create user... is it good?

  I searched a lot of places, but could not find any appropriate entries. Please provide some input?

  Thank you

  No, during the change won't email notification.

  Creating trusted users, suite of property gets used:

  Must send notifications in recon or not

  Determines whether the notification is sent to the user in the user login and password are generated in the event handler postprocess for the creation of the user through reconciliation of the trusted source. If the value is set to true, then notification is sent when the user name and password are generated in the event handler postprocess for the creation of the user through reconciliation of the trusted source. If the value is set to false, then notification is not sent when the user name and password are generated in the event handler postprocess for the creation of the user through reconciliation of the trusted source.

  Recon.SEND_NOTIFICATION

  true

  If you want to send messages during the recon trust (update/changes), you must write your own code to java of notification, FYI: http://www.ateam-oracle.com/oim-11g-notifications/

  ~ J

• Part of e-mail notifications of Standard edition?

  I just started to evaluate the operations of vCenter and am happy to see email notifications are now included. 60-day trail is for the Enterprise edition, but if we buy anything it is likely to be the standard edition. What I'm trying to confirm, it's the e-mail feature is part of the Standard edition.

  Looking at the comparison of product of VMware , it lists the "Proactive intelligent alerts" as in the standard, but I think that these are just alerts "badge" based in the console, not the e-mail notifications. The same matrix lists 'Alerts and reports' as being only in the Advanced edition, but I think it's done refers only to the ability to alert and report management.

  What makes me think that alert standard e-mail is present in all versions, but can anyone confirm?

  Thank you

  Ed.

  In fact, you have alert notifications in the standard as well.

  To enable them, you have:

  (1) connection in the administrative user interface and configure the SMTP server (to note that SSL/TLS encryption is not supported, although the options are there)

  2) date back to the vsphere-ui, and then open the "Notifications" menu and configure the actual alerts.

• alarm e-mail notification does not

  According to http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004070:

  The ability to send mail can be limited

  that the anonymous e-mail is not allowed or specific user accounts

  are required to send an email. If this is the case, that a rule must be created

  to allow the server to VirtualCenter email, because it is

  currently no way to configure authentication SMTP with VirtualCenter.

  1. is there an informal way to configure vCenter to send an email with authentication through the service console?

  2. is there a way to configure Zimbra to allow vCenter send emails without having to authenticate?

  ' 2. is there a way to configure Zimbra to allow vCenter send emails without having to authenticate?

  This can help:

  http://wiki.Zimbra.com/wiki/ZimbraMtaMyNetworks

  Rich

• How to return the approver e-mail notification iProcurement in R12?

  Hi all
  
  How to return the approver e-mail notification iProcurement in R12?
  
  Symptom: A Summit a requisition to B, need for approval of B
  
  (1) B lost the e-mail that is sent by A
  (2) need B a new notification sent by A.
  
  environment: Oracle R12.1.2 | AIX 6.1
  
  
  
  
  Concerning
  Terry Chen

  I thank you for your answer, you want to reassign B once again?

  Yes.

  Can I use the feature "Rewind"? Can this function sends notification to the user again?

  Don't know if it would work for notifications of iProcurement, then please try first the option to reassign.

  Thank you
  Hussein

• E-mail notification of Web Forms

  Question here, maybe stupid, but this is my first time with Business Catalyst and I work with a site of someone else in place, so please forgive me.

  The client has a web form that accepts requests for consultation. Submissions go into the database, and the customer will receive an email. Currently, the email is going to [email protected]; they want to go to [email protected]. I'm looking for although BC for the last hour and cannot find anywhere where it is controlled. Where can I change the email address these notifications go?

  Thank you

  Hello

  Check the implementation of workflow as it comes to the e-mail notification that is sent to users of the site.

  - http://kb.worldsecuresystems.com/152/bc_152.html

  - http://kb.worldsecuresystems.com/657/cpsid_65743.html

  If still need help please provide the URL of the site and the form online so we can check your installation.

  Kind regards

  -Sidney

• @Native Directory e-mail notification features

  Hi all
  
  We use native Directory to access user for the purposes of planning permissions. Is it possible to have the functionality of e-mail notification for Workflow with native Directory processes?

  The e-mail feature is implemented in planning for example Server SMTP and the email addresses of the users/admin must be implemented in the planning.
  So, it doesn't really have nothing to do with the HSS and the native directory.

  See you soon

  John
  http://John-Goodwin.blogspot.com/